Professional Documents
Culture Documents
Sony rdr-hxd-870,970,1070 (ET)
Sony rdr-hxd-870,970,1070 (ET)
RMT-D248P
SERVICE MANUAL
Ver. 1.1 2007.10
Australian Model
RDR-HXD870/HXD970
Revised-1
SPECIFICATIONS
System Video recording format: MPEG-2, MPEG-1 Laser: Semiconductor laser Transmission standards (Digital Audio recording format/applicable broadcasting): DVB-T bit rate: Dolby Digital 2 ch 256 kbps/128 kbps (in EP, SLP, and Channel coverage (Digital broadcasting): SEP mode), PCM VHF: E5 to E12, F5 to F10, Italian D to Inputs and outputs H2, Australian AS6 to AS12 LINE 2 OUT UHF: E21 to E69, B21 to B68, F21 to (AUDIO): Phono jack/2 Vrms/10 kilohms F69, Australian AS27 to AS69 (VIDEO): Phono jack/1.0 Vp-p Channel coverage (Analogue (S VIDEO): 4-pin mini DIN/Y: 1.0 Vp-p, broadcasting): C: 0.3 Vp-p (PAL) PAL (B/G, D/K, I)/SECAM (L) LINE 2 IN VHF: E2 to E12, R1 to R12, F2 to F10, (AUDIO): Phono jack/2 Vrms/more than Italian A to H, AS0 to AS12, NZ1 to NZ11, 22 kilohms Ireland A to J, South Africa 4 to 11, 13 (VIDEO): Phono jack/1.0 Vp-p UHF: E21 to E69, AS28 to AS69, R21 to (S VIDEO): 4-pin mini DIN/Y: 1.0 Vp-p, R69, B21 to B69, F21 to F69 C: 0.3 Vp-p (PAL) CATV: S01 to S05, S1 to S20, France LINE 3 TV: 21-pin B to Q CVBS OUT HYPER: S21 to S41 S-Video/RGB OUT (upstream) LINE 1/DECODER (AEP, UK only): 21-pin The above channel coverage merely ensures CVBS IN/OUT the channel reception within these ranges. It S-Video/RGB IN does not guarantee the ability to receive Decoder (AEP, UK only) signals in all circumstances. For details, see DV IN: 4-pin/i.LINK S100 Receivable channels. DIGITAL OUT (COAXIAL): Phono jack/ 0.5 Vp-p/75 ohms Video reception: Frequency synthesizer COMPONENT VIDEO OUT system (Y, PB/CB, PR/CR): Audio reception: Split carrier system Phono jack/Y: 1.0 Vp-p, Aerial out: 75-ohm asymmetrical aerial PB/CB: 0.7 Vp-p, PR/CR: 0.7 Vp-p socket Timer: Clock: Quartz locked/Timer indication: 24-hour cycle (digital)/ Power back-up duration: 1 hour G-LINK: mini jack (AEP, UK only) HDMI OUT: HDMI 19-pin-Standard Connector USB: USB jack Type A (For connecting digital still camera, Memory card reader and USB memory) USB jack Type B (For connecting PictBridge-compatible printers) General Power requirements: 220-240 V AC, 50/60 Hz Power consumption: 49 W Dimensions (approx.): 430 76.5 286 mm (width/height/ depth) incl. projecting parts Hard disk drive capacity: RDR-HXD870: 160 GB RDR-HXD970: 250 GB RDR-HXD1070: 500 GB Mass (approx.): 4.7 kg Operating temperature: 5C to 35C Operating humidity: 25% to 80% Supplied accessories: Mains lead (1) Aerial cable (1) Remote commander (remote) (1) Audio/Video cord (1) (Australian) Set top box controller (1) (AEP, UK model) R6 (size AA) batteries (2) EURO AV adapter with selector (1) (Australian model) EURO AV adapter (1) (Australian model)
Specifications and design are subject to change without notice.
DVD RECORDER
WARNING!! WHEN SERVICING, DO NOT APPROACH THE LASER EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO CONFIRM LASER BEAM EMISSION, BE SURE TO OBSERVE FROM A DISTANCE OF MORE THAN 25 cm FROM THE SURFACE OF THE OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
Unleaded solder Boards requiring use of unleaded solder are printed with the leadfree mark (LF) indicating the solder contains no lead. (Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size.)
CAUTION: The use of optical instrument with this product will increase eye hazard. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
SAFETY-RELATED COMPONENT WARNING!! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
: LEAD FREE MARK Unleaded solder has the following characteristics. Unleaded solder melts at a temperature about 40C higher than ordinary solder. Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time. Soldering irons using a temperature regulator should be set to about 350C. Caution: The printed pattern (copper foil) may peel away if the heated tip is applied for too long, so be careful! Strong viscosity Unleaded solder is more viscous (sticky, less prone to flow) than ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc. Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder. Special Component Notice The components identified by mark 9 contain confidential information. Strictly follow the instructions whenever the components are repaired and/or replaced.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following safety checks before releasing the set to the customer. 1. Check the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder splashes and bridges. Check the interboard wiring to ensure that no wires are "pinched" or contact high-wattage resistors. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement. 4. Look for parts which, through functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement. 5. Check the B+ voltage to see it is at the values specified. 6. Flexible Circuit Board Repairing Keep the temperature of the soldering iron around 270C during repairing. Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). Be careful not to apply force on the conductor when soldering or unsoldering.
2. 3.
1.
GENERAL
WARNING 1-1 Precautions 1-1 Quick Guide to Disc Types 1-2 Hookups and Settings 1-3 Hooking Up the Recorder 1-3 Step 1: Connecting the Aerial Cable and Set Top Box Controller 1-3 Step 2: Connecting the Video Cords/HDMI Cord 1-4 Step 3: Connecting the Audio Cords/HDMI Cord 1-5 Step 4: Connecting the Mains Lead 1-5 Step 5: Preparing the Remote 1-5 Step 6: Easy Setup 1-6 Connecting a VCR or Similar Device 1-7 Connecting an External Decoder 1-7 Eight Basic Operations Getting to Know Your DVD Recorder 1-8 1. Inserting a Disc 1-8 2. Recording a Programme 1-8 3. Playing the Recorded Programme (Title List) 1-9 4. Displaying the Playing Time and Play Information 1-9 5. Changing the Name of a Recorded Programme 1-10 6. Labelling and Protecting a Disc 1-10 7. Playing the Disc on Other DVD Equipment (Finalise) 1-10 8. Reformatting a Disc 1-11 Guide to Digital Services (For Freeview users only) 1-11 EPG (Electronic Programme Guide) 1-11 Programme Information 1-11 Viewing a Digital Text Service 1-12 Timer Recording (For Freeview users only) 1-12 Before Recording 1-12 Timer Recording (Standard/EPG) 1-12 Checking/Changing/Cancelling Timer Settings (Timer List) 1-14 Recording from Connected Equipment 1-14 GUIDE Plus+ (For analogue broadcasting only) 1-15 Introduction to the GUIDE Plus+ System 1-15 Watching TV Using the GUIDE Plus+ System 1-15 Searching for a Programme Using the GUIDE Plus+ System 1-16 Listing Up Your Favourite Programme Information (My TV) 1-16 Making Changes to the GUIDE Plus+ System 1-16 Timer Recording (For analogue broadcasting only) 1-17 Before Recording 1-17 Timer Recording (GUIDE Plus+/Manual) 1-17 Checking/Changing/Cancelling Timer Settings 1-18 Recording from Connected Equipment 1-19 Playback 1-19 Playing the Recorded Programme/DVD 1-19 Pausing a TV Broadcast (TV Pause/Pause Live TV) 1-21
2.
2-1. 2-2. 2-3. 2-4 2-5. 2-6. 2-7.
DISASSEMBLY
UPPER CASE 2-2 TRAY COVER ASSEMBLY 2-2 FRONT PANEL SECTION 2-3 FR-274 BOARD, FL-178 BOARD 2-3 DVD DRIVE 2-4 DC FAN 2-4 HARD DISK 2-5
AV-114 BOARD 2-5 DT-120 BOARD 2-6 POWER SUPPLY BLOCK 2-6 CIRCUIT BOARDS LOCATION 2-7
3.
3-1. 3-2. 3-3. 3-4. 3-5. 3-6.
BLOCK DIAGRAMS
OVERALL BLOCK DIAGRAM 3-1 AV-114 BLOCK DIAGRAM 3-3 DT-120 BLOCK DIAGRAM 3-5 RD-065 BLOCK DIAGRAM 3-7 FR-274, FL-178 BLOCK DIAGRAM 3-9 POWER BLOCK DIAGRAM 3-11
RD-065 (POWER BLOCK, EMMA BLOCK, VIDEO/ AUDIO BLOCK, MEMORY BLOCK, SATA/IDE IF, HDMI/DV/USB BLOCK, DVD DRIVE) PRINTED WIRING BOARD 4-55 FL-178 (DV, USB, REMOCON RECEIVER, POWER SW) PRINTED WIRING BOARD 4-59
5.
5-1. IT CONTROL IC (IC101:LC87F06J2A-F58W3-E (AV-114 BOARD)) 5-1 5-2. AV ENCODER/DECODER IC (IC1001:MC10050F1-105-LU1-A (RD-65 BOARD)) 5-3
4.
6.
SERVICE MODE
4-1. FRAME SCHEMATIC DIAGRAM 4-1 4-2. SCHEMATIC DIAGRAMS 4-3 WAVEFORMS 4-4 AV-114 (1/5) (IT CONTROLLER, IR) SCHEMATIC DIAGRAM 4-5 AV-114 (2/5) (POWER/FAN CONT.) SCHEMATIC DIAGRAM 4-7 AV-114 (3/5) (VIDEO/AUDIO) SCHEMATIC DIAGRAM 4-9 AV-114 (4/5) (EURO) SCHEMATIC DIAGRAM 4-11 AV-114 (5/5) (TUNER) SCHEMATIC DIAGRAM 4-13 DT-120 (1/5) (EMMA2LL) SCHEMATIC DIAGRAM 4-15 DT-120 (2/5) (CI CONTROL) SCHEMATIC DIAGRAM 4-17 DT-120 (3/5) (DIGITAL TUNER) SCHEMATIC DIAGRAM 4-19 DT-120 (4/5) (POWER) SCHEMATIC DIAGRAM 4-21 DT-120 (5/5) (VIDEO DECODER) SCHEMATIC DIAGRAM 4-23 FR-274 (FL DRIVER, LINE 2 IN, FUNCTION SW) SCHEMATIC DIAGRAM 4-25 FL-178 (DV, USB, REMOCON RECEIVER, POWER SW) SCHEMATIC DIAGRAM 4-27 RD-065 (1/7) (POWER BLOCK) SCHEMATIC DIAGRAM 4-29 RD-065 (2/7) (EMMA BLOCK) SCHEMATIC DIAGRAM 4-31 RD-065 (3/7) (VIDEO/AUDIO BLOCK) SCHEMATIC DIAGRAM 4-33 RD-065 (4/7) (MEMORY BLOCK) SCHEMATIC DIAGRAM 4-35 RD-065 (5/7) (SATA/IDE IF) SCHEMATIC DIAGRAM 4-37 RD-065 (6/7) (HDMI/DV/USB BLOCK) SCHEMATIC DIAGRAM 4-39 RD-065 (7/7) (DVD DRIVE) SCHEMATIC DIAGRAM 4-41 SWITCHING REGULATOR (SRV-2057EK) SCHEMATIC DIAGRAM 4-43 4-3. PRINTED WIRING BOARDS 4-45 FR-274 (FL DRIVER, LINE 2 IN, FUNCTION SW) PRINTED WIRING BOARD 4-45 AV-114 (IT CONTROLLER, IR, POWER/FAN CONT., VIDEO/AUDIO, EURO, TUNER) PRINTED WIRING BOARD 4-47 DT-120 (EMMA2LL, CI CONTROL, DIGITAL TUNER, POWER, VIDEO ENCODER) PRINTED WIRING BOARD 4-51
6-1. SERVICE MODE MAP 6-2 6-2. Diagnostic Mode 6-3 6-2-1. Model Setting 6-3 6-2-2. Service Mode 6-4 6-2-3. Version Information and Other Information (First screen) 6-4 6-2-4. RF Level Simplified Diagnosis (Subscreen1) 6-5 6-2-5. HDD Information for the HDD return sheet (Simplified measurement mode) 6-6 6-2-6. Cautions for handling the HDD 6-7 6-2-7. HDD Error Logging 6-9 6-2-8. ATA/ATAPI History - ERR 6-10 6-2-9. How to confirm HDD Access Flow 6-10 6-2-10. ATA/ATAPI Debugging Screen (Second Screen) and LD Deterioration Judgment (for writer) 6-11 6-2-11. History of VR Recording-related Errors 6-13 6-2-12. DV Service Mode 6-17 6-2-13. EPG Service Mode 6-19 6-2-14. Aging Mode 6-21 6-2-15. HDD Check Mode 6-22 6-3. Setup Related Menu 6-23 6-3-1. Firmware Downloading 6-23 6-3-2. Area-Specific Channel Setting 6-23 6-3-3. OSD Filter Setting (Subscreen 4) 6-24
7. 8.
8-1. EXPLODED VIEWS 8-1 8-1-1. OVERALL SECTION 8-1 8-1-2. CHASSIS SECTION 8-2 8-2. ELECTRICAL PARTS LIST 8-3
SERVICE NOTE
1. DISK REMOVAL PROCEDURE IF THE TRAY CANNOT BE EJECTED (FORCED EJECTION)
1. 2. Remove the upper case. Insert the stiff wire in the hole and eject the tray.
Hole
2.
If the tray cannot be ejected while the disc is not inserted Execute the forced ejection. Insert a DVD-ROM (DVD test disc, DVD software available on the market, or the like) on the tray and try to close the tray. (There are cases that it recovers the trouble.) Contents of forcedly ejected blank disc media (DVDRW, R) can be damaged. (There can be a case that initialization is also impossible.)
3.
[Recorder's Model Setting] Input the number using the remote for Service > ? Manufacturer P ] S ]
Input No. [ 1 : [ 2 :
Table1 Correspondence table between tentative model name and final product name
Model name RDR-HXD870 RDR-HXD970 RDR-HXD1070 AEP1 MRX-1660/EC1 MRX-1670/EC1 MRX-1680/EC1 AEP2 Tentative model name AEP3 MRX-1660/EC3 MRX-1670/EC3 UK MRX-1660/CEK MRX-1670/CEK MRX-1680/CEK Australian MRX-1660/AU2 MRX-1670/AU2
MRX-1635/EC1 VERSION : 1.01 SYSCON : RELEASE 104 Rev. 1. 5895 TUNERCON : 1.178 DRIVE : DVD-RW DVR-L12X 1.00 PIC SERIAL : 000800004940 HDD INT : WDC WD2500AAJS 9
OK OK OK 250
Details on HDD data are described below: HDD : WDC1023456 # 160 Capacity of the HDD (unit: Gbytes) HDD identification error indication HDD model name
FL Display
OS Display Repaining the HDD. r HDD repair is complete. An error occurred. Please consult your nearest Sony dealer. Note that contents on the HDD may be erased when servicing this unit.
Remarks
REPAIR
E01
Failure to physically identify the HDD (no connection, defective HDD, interface error). Physical identification of HDD possible, but not identified Physical identification of HDD possible, HDD identified, but failure in logical formatting. Physical identification of HDD possible, HDD identified, and correct logical formatting (HDD correctly identified).
Blank space
Check the connection to the SATA cable and power cable. Replace the SATA cable or power cable. Replace the HDD. Replace the FE or part in the SATA/ATA communication. # indicates that the HDD is not recognized. ! indicates an HDD authorization error. Initialize the HDD.
E02
The Hard Disk Drive info is incorrect. Use the Disk Setup menu to reformat.
Normal
E01
NO
YES NO
Is not # displayed?
Unauthorized HDD
* Refer to Note.
YES
Reconnect the SATA cable. Does the problem still occur?
Note: Write down the HDD information on the HDD return sheet before replacing the HDD. Note the information on pages 6-6, 6-7, 6-9, and 6-10 of Chapter 6, SERVICE MODE.
NO
YES NO
For information about replacing the HDD, see page 2-5 of Chapter 2, DISASSEMBLY. After replacing the HDD, perform Factory Check on SERVICE NOTE, page 10. When performing Factory Check, the data saved to the HDD by the customer is erased. Obtain customer consent before performing Factory Check.
YES
Replace the HDD with a new one and perform Factory Check.
* Refer to Note.
NO
END
YES
There may be a problem with the Engine. Therefore, put the original HDD back in the unit. Then, follow the procedure to replace the Engine. After replacing the Engine, perform Setting the Model Name on Service Note, page 6. Note: Write down the HDD information on the HDD return sheet before replacing the Engine. For information about replacing the Engine, see page 2-4 of Chapter 2, DISASSEMBLY. When performing Factory Check, the data saved to the HDD by the customer is erased. Obtain customer consent before performing Factory Check.
NO
Final check
Note: Performing Final Check will not erase the HDD data.
YES
Another defect has occurred.
E02
Note: When E02 is displayed, the user data has already broken due to system DATA Error.
NO
* Refer to Note.
YES
Factory check
Final check
Note: Performing Final Check will not erase the HDD data.
NO
* Refer to Note.
YES END
4-5. When playing a VIDEO, MP3, or JPG, the contents freeze
When playing a VIDEO, MP3, or JPG, the contents freeze. (Any error is not displayed on the FLD.)
NO
YES
Display the ATA/ATAPI history by using HDD Access Flow on page 6-10.
NO
YES
Final check
Has the Final check ended with success?
NO
* Refer to Note.
Note: Performing Final Check will not erase the HDD data.
YES END
4-6. Factory Check 1. Pull out and then reconnect the AC cable. 2. Press ESC key followed by P.RUN key to start Formatting. 3. When B COMPLETE appears, the Factory Check is complete. 4. Press Power button. The unit starts normally. When Factory Check has finished completely without error, reset Recording Error History and ATA/ATAPI History Error with the Clear key.
Recording Error History Display 07-03-19 07-03-19 07-03-19 07-03-19 07-03-19 12:36:06 12:36:06 12:36:06 12:36:06 12:27:27 ESFSYS INIT HDD Zero MR HDD Initialze HDD Zero MR Status NG
Note: Write down the HDD information on the HDD return sheet before replacing the HDD. Note the information on pages 6-6, 6-7, 6-9, and 6-10 of Chapter 6, SERVICE MODE. When performing Factory Check, the data saved to the HDD by the customer is erased. Obtain customer consent before performing Factory Check. Recording Error History and ATA/ATAPI History Error, see pages 6-9, 6-10 of Chapter 6, SERVICE MODE.
4-7. Final Check 4-7-1. SELF TEST (SMART TEST) This is a simplified diagnosis for the HDD. A serious failure in the HDD can be detected with this test. Time required for testing: Approx. 60 sec. How to start/terminate the diagnostic program Use the remote control unit for servicing. How to start: Press ESC, CX, 0, and 1 keys simultaneously. How to terminate: Press ESC key. Execute Self-Test. Press 3 key on the remote control unit for servicing while the menu screen is displayed. When the following screen is displayed, press 1 key to start the Self-Test.
Note: Performing Self Test will not erase the HDD data.
Diagnosis results Without an error: . . . Completed is displayed. Then, proceed to the Extended Self-Test. With an error: . . . Error is displayed. Look at the number in Test Result. If the place value for tens is 1 or 2, execute the Self-Test again. If it is from 3 to 7, the HDD must be replaced.
Note: If the result of the second test is the same, replacement of the HDD is required.
Example: No error
10
4-7-2.
Performance Check
Press ESC key, then A.MON key. This is a reading test across all sectors of the HDD. Data recorded on the HDD will not be erased, because no writing operation is performed. Time required for testing: Approx. 45 min/160 G 75 min/250 G 130 to 150 min/500 G When Performance Check finishes completely without error, reset ATA/ATAPI History Error with the Clear key.
FL display specification
HDD factory Check
aNormal display 0:Factory Check start
Power On
aError display
0 1
0 0 0
1:Power ON Test
81:Power ON Test
HDD ERR 81 82:all Sequential Read Verify Test 8 2 * * 83:Power OFF Test 83 0
2:Random Write/Read/Compare Test 2 3:ID Sequential Read Verify Test 3 4:OD Sequential Read Verify Test 4 5:Format 6:Power OFF Test
Power off 15s 20s Power off 15s 20s Power off 15s Power On Power On
***** H M S
00000
H M S
HDD ERR 82
HDD ERR 03
15s
Power off
5 FM 6 0
7 8 9
0 0 0
000000 HDD ERR 07 000000 000000 HDD ERR 09 000000 7:Power ON Test 8:Power OFF Test 9:Power ON Test a:Power OFF Test b:Complete
A 0
B COMPLETE
11
MEMO
12
RDR-HXD870/HXD970/HXD1070
This section is extracted from instruction manual. (RDR-HXD770/HXD870/HXD970/HXD1070: 3-113-760-11 (1))
SECTION 1 GENERAL
Precautions
This equipment has been tested and found to comply with the limits set out in the EMC Directive using a connection cable shorter than 3 metres. Do not attempt to replace or upgrade the hard disk by yourself, as this may result in malfunction. If the hard disk drive should malfunction, you cannot recover lost data. The hard disk drive is only a temporary storage space. Do not place the recorder in an inclined position. It is designed to be operated in a horizontal position only. Keep the recorder and discs away from equipment with strong magnets, such as microwave ovens, or large loudspeakers. Do not place heavy objects on the recorder.
WARNING
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. The mains lead must be changed only at a qualified service shop. Do not expose the battery to excessive heat such as direct sunlight, fire or the like.
Notice for customers in the United Kingdom and Republic of Ireland A molded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS1362, (i.e., marked with or mark) must be used. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
On safety
Should any solid object or liquid fall into the cabinet, unplug the recorder and have it checked by qualified personnel before operating it any further.
On recording
Make trial recordings before making the actual recording.
Precautions
This appliance is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT MARKING is located on the rear of the unit. This unit operates on 220 240 V AC, 50/60 Hz. Check that the units operating voltage is identical with your local power supply. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. Install this system so that the mains lead can be unplugged from the wall socket immediately in the event of trouble. GUIDE Plus+ and G-LINK are (1) registered trademarks or trademarks of, (2) manufactured under license from and (3) subject of various international patents and patent applications owned by, or licensed to, Gemstar-TV Guide International, Inc. and/or its related affiliates. GEMSTAR-TV GUIDE INTERNATIONAL, INC. AND/ OR ITS RELATED AFFILIATES ARE NOT IN ANY WAY LIABLE FOR THE ACCURACY OF THE PROGRAM SCHEDULE INFORMATION PROVIDED BY THE GUIDE PLUS+ SYSTEM. IN NO EVENT SHALL GEMSTARTV GUIDE INTERNATIONAL, INC. AND /OR ITS RELATED AFFILIATES BE LIABLE FOR ANY AMOUNTS REPRESENTING LOSS OF PROFITS, LOSS OF BUSINESS, OR INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE PROVISION OR USE OF ANY INFORMATION, EQUIPMENT, OR SERVICES RELATING TO THE GUIDE PLUS+ SYSTEM.
CAUTION
The use of optical instruments with this product will increase eye hazard. As the laser beam used in this DVD recorder is harmful to eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.
On power sources
The recorder is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the recorder itself has been turned off. If you are not going to use the recorder for a long time, be sure to disconnect the recorder from the wall outlet. To disconnect the AC power cord (mains lead), grasp the plug itself; never pull the cord.
Copyrights
Television programmes, films, video tapes, discs, and other materials may be copyrighted. Unauthorized recording of such material may be contrary to the provisions of the copyright laws. Also, use of this recorder with cable television transmission may require authorization from the cable television transmitter and/or programme owner. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
,continued
This label is located on the laser protective housing inside the enclosure.
The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.
On placement
Place the recorder in a location with adequate ventilation to prevent heat build-up in the recorder. Do not place the recorder on a soft surface such as a rug that might block the ventilation holes. Do not place the recorder in a confined space such as a bookshelf or similar unit. Do not place the recorder in a location near heat sources, or in a place subject to direct sunlight, excessive dust, or mechanical shock.
This Product includes FontAvenue fonts licenced by NEC corporation. FontAvenue is a registered trademark of NEC corporation.
IMPORTANT NOTICE
Caution: This recorder is capable of holding a still video image or on-screen display image on your television screen indefinitely. If you leave the still video image or onscreen display image displayed on your TV for an extended period of time you risk permanent damage to your television screen. Plasma display panels and projection televisions are especially susceptible to this.
If you have any questions or problems concerning your recorder, please consult your nearest Sony dealer.
1-1
Select Video Mode Dub HDD contents to a Off in HDD DVD (VR mode) to play Recording Format on other DVD players (page 144) Select Video Mode Dub HDD contents to a On (default) in DVD (Video mode) to play HDD Recording on other DVD players Format (page 144)
8x-speed or slower DVD+RWs 6x-speed or slower DVD-RWs (Ver.1.1, Ver.1.2 with CPRM*2) 16x-speed or slower DVD+Rs 16x-speed or slower DVD-Rs (Ver.2.0, Ver.2.1 with CPRM*2) 8x-speed or slower DVD+R DL (Double Layer) discs 8x-speed or slower DVD-R DL (Dual Layer) discs (Ver.3.0 with CPRM*2)
DVD+RW, DVD-RW, DVD+R, DVD+R DL, DVD-R, and DVD-R DL are trademarks.
*1
When an unformatted DVD-R is inserted into this recorder, it is automatically formatted in Video mode. To format a new DVD-R in VR mode, format in the Format setup (page 47). *2 CPRM (Content Protection for Recordable Media) is a coding technology that protects copyrights for images.
DVD+RW
+RW
-RWVR
Playable only on VR mode Format in VR mode compatible players (page 36) (finalisation unnecessary) Format in Video mode (page 36) Playable on most DVD players (finalisation necessary) (page 45)
-RWVideo
DVD+R
+R
DVD+R DL
DVD-R
VR mode
-RVR
Format in VR mode (page 36)*1 Formatting is performed in the Format setup (page 47). Automatically formatted in Video mode
Playable only on DVD-R in VR mode compatible players (finalisation necessary) (page 45)
DVD-R DL
Video mode
-RVideo
10
,continued
11
Playable discs
Type Disc Logo Icon used in this manual Characteristics
b Notes
Some DVD+RWs/DVD+Rs, DVD-RWs/DVDRs, DVD-RAMs, or CD-RWs/CD-Rs cannot be played on this recorder due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software. The disc will not play if it has not been correctly finalised. For more information, see the operating instructions for the recording device. You cannot mix VR mode and Video mode on the same DVD-RW. To change the discs format, reformat the disc (page 47). Note that the discs contents will be erased after reformatting. You cannot shorten the time required for recording even with high-speed discs. It is recommended that you use discs with For Video printed on their packaging. You cannot add new recordings to DVD+Rs, DVD-Rs, or DVD-RWs (Video mode) that contain recordings made on other DVD equipment. In some cases, you may not be able to add new recordings to DVD+RWs that contain recordings made on other DVD equipment. If you do add a new recording, note that this recorder will rewrite the DVD menu. You cannot edit recordings on DVD+RWs, DVD-RWs (Video mode), DVD+Rs, or DVD-Rs that are made on other DVD equipment. If the disc contains PC data unrecognizable by this recorder, the data may be erased. You may not be able to record, edit, or dub on some recordable discs, depending on the disc. Do not insert any discs that cannot be recorded or played on this recorder. This may cause the recorder to malfunction.
DVD VIDEO
DVD
Discs such as movies that can be purchased or rented This recorder also recognises DVDRAMs* as DVD Video compatible discs. VIDEO CDs or CD-Rs/CD-RWs in VIDEO CD/Super VIDEO CD format
VIDEO CD
VCD
CD
CD
Music CDs or CD-Rs/CD-RWs in music CD format DVD+RWs/DVD+Rs/DVD-RAMs* containing MP3 audio tracks or DivX video files DVD-RWs/DVD-Rs/DVD-ROMs containing MP3 audio tracks, JPEG image files or DivX video files CD-ROMs/CD-Rs/CD-RWs containing either MP3 audio tracks, JPEG image files or DivX video files
DATA DVD
DATA DVD
DATA CD
DATA CD
DVD VIDEO and CD are trademarks. DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license. DivX is a video file compression technology, developed by DivX, Inc. * If the DVD-RAM has a removable cartridge, remove the cartridge before playback.
DVD-ROMs/DVD+RWs/DVD-RWs/ DVD+Rs/DVD-Rs that do not contain DVD Video, DivX video, JPEG image files, or MP3 audio tracks. DVD Audio discs Cartridge-only type DVD-RAMs. HD layer on Super Audio CDs DVD VIDEOs with a different region code (page 13). DVDs that were recorded on a different recorder and not correctly finalised.
Note on DualDiscs
A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to the Compact Disc (CD) standard, playback on this product is not guaranteed.
12
13
1-2
Step 1: Connecting the Aerial Cable and Set Top Box Controller
If the set top box receiver can output RGB signals
Hookups and Settings
b Notes
See Specifications (page 160) for a list of supplied accessories. Plug in cords securely to prevent unwanted noise. Refer to the instructions supplied with the components to be connected. You cannot connect this recorder to a TV that does not have a SCART or video input jack. Be sure to disconnect the mains lead of each component before connecting.
This recorder accepts RGB signals. If the set top box receiver can output RGB signals, connect the TV SCART connector on the set top box receiver to the LINE 1/DECODER jack, and set LINE 1 In to RGB in the Video In/Out setup (page 137). See the instructions supplied with the set top box receiver.
b Notes
If your aerial is a flat cable (300-ohm twin lead cable), use an external aerial connector (not supplied) to connect the aerial to the recorder. If you have separate cables for AERIAL antennas, use an AERIAL UHF/VHF band mixer (not supplied) to connect the aerial to the recorder. If you disconnect the recorders mains lead, you will not be able to view the signals from the connected set top box receiver.
GUIDE Plus+ (page 63) See page 71. GUIDE Plus+ (page 63) See page 71.
b Note
Beginning in 2008, analogue broadcasts in the UK will end area by area, with all analogue broadcasts scheduled to end by 2012. After analogue broadcasts end in your area, you will not be able to use hookup C to view TV broadcasts. At that time, change to hookup A to view digital broadcasts.
14
,continued
15
to DIGITAL AERIAL IN
: Signal flow
to G-LINK
Wall
DVD recorder
: Signal flow If your set top box receiver does not have an aerial output jack, connect the aerial to the recorders ANALOG AERIAL IN jack. Connect only if your set top box receiver has a SCART connector.
*2
: Signal flow
DVD recorder
16
,continued
17
1-3
Wall
to ANALOG AERIAL IN
TV
to LINE 2 OUT (VIDEO) SCART cord (not supplied) (yellow) DVD recorder to ANALOG AERIAL OUT TV to T LINE 3 TV
DVD recorder (green) (blue) (red) to LINE 2 OUT (S VIDEO) to HDMI OUT
: Signal flow
(green)
(blue)
(red)
D
TV, projector, or audio component
E
TV, projector, or audio component
: Signal flow
18
,continued
19
Insert the HDMI connector straight into the HDMI jack. Do not bend or apply pressure to the HDMI connector.
About the HDMI Control functions for BRAVIA Theatre Sync (for HDMI connections only)
Hookups and Settings
b Notes
Be sure to disconnect the HDMI cord when moving the recorder. Do not apply too much pressure to the cabinet wall, if you place the recorder on the cabinet with the HDMI cord connected. It may damage the HDMI jack or the HDMI cord. Do not twist the HDMI connector while connecting to or disconnecting from the HDMI jack to avoid damaging the HDMI jack and connector.
By connecting Sony components that are compatible with the HDMI Control function with an HDMI cord (not supplied), operation is simplified as below: One-Touch Play (page 81) System Power-Off When you turn the TV off by using the power button on the TVs remote, the components compatible with the HDMI Control function turn off automatically.
b Notes
Depending on the connected component, the HDMI Control function may not work. Refer to the operating instructions supplied with the component. The recorder supports only the playback option of HDMI Control. Player appears on the TV screen when using the HDMI Control functions.
b Notes
For correct SMARTLINK connection, you will need a SCART cord that has the full 21 pins. Refer to your TVs instruction manual as well for this connection. Not all TVs respond to the functions above.
*1 *2
b Notes
Do not connect more than one type of video cord between the recorder and your TV at the same time. Do not make connections A and E at the same time. When you connect the recorder to your TV via the SCART jacks, the TVs input source is set to the recorder automatically when you start playback. If necessary, press the TV t button on the remote to return the input to the TV. If you connect the recorder to a TV with SMARTLINK, set LINE 3 Out to Video in the Video In/Out setup. You cannot connect the HDMI OUT jack (connection E) to DVI jacks that are not HDCP compliant (e.g., DVI jacks on PC displays). Component video and RGB signals are not output when using the HDMI connection. * This DVD recorder incorporates High-Definition Multimedia Interface (HDMI) technology. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Carefully align the HDMI jack on the rear of the recorder and the HDMI connector by checking their shapes. Make sure the connector is not upside down or tilted.
MEGALOGIC is a registered trademark of Grundig Corporation. EASYLINK and CINEMALINK are trademarks of Philips Corporation. *3 Q-Link and NexTView Link are trademarks of Panasonic Corporation. *4 EURO VIEW LINK is a trademark of Toshiba Corporation. *5 T-V LINK is a trademark of JVC Corporation.
Not straight
20
21
1-4
b Notes
Do not connect your TVs audio output jacks to the LINE IN (R-AUDIO-L) jacks at the same time. This will cause unwanted noise to come from your TVs speakers. With connection B, do not connect the LINE IN (R-AUDIO-L) and LINE 2 OUT (R-AUDIO-L) jacks to your TVs audio output jacks at the same time. This will cause unwanted noise to come from your TVs speakers. With connection A, after you have completed the connection, make the appropriate settings in the Audio Out setup (page 138). Otherwise, no sound or a loud noise will come from your speakers. When you connect the recorder to an audio component using an HDMI cord, you will need to do one of the following: Connect the audio component to the TV with the HDMI cord, or Connect the recorder to the TV with a video cord other than HDMI cord (component video cord, S-video cord, or audio/video cord).
*1
to HDMI OUT
to AC IN
2
to mains
DVD recorder
INPUT VIDEO
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. *2 DTS and DTS Digital Out are registered trademarks of DTS, Inc.
(white)
(yellow)
L
(white)
AUDIO R
: Signal flow
If your audio component has a Dolby*1 Digital, DTS*2, or MPEG audio decoder and a digital input jack, use this connection. You can enjoy Dolby Digital (5.1ch), DTS (5.1ch), and MPEG audio (5.1ch) surround effects.
If you connect a Sony audio component that is compatible with the HDMI control function, refer to the operating instructions supplied with the audio component.
22
23
b Notes
Depending on the connected unit, you may not be able to control your TV with some or all of the buttons below. If you enter a new code number, the code number previously entered will be erased.
If you have a Sony DVD player or more than one Sony DVD recorder
If the supplied remote interferes with your other Sony DVD recorder or player, set the command mode number for this recorder and the supplied remote to one that differs from the other Sony DVD recorder or player after you have completed Step 6: Easy Setup. The default command mode setting for this recorder and the supplied remote is DVD3. You can check the current Command Mode in the front panel display. For details, see page 149. The default command mode setting for this recorder and the supplied remote is DVD3. The remote does not function if different command modes are set for the recorder and remote. Set the same command mode.
b Notes
If the supplied remote interferes with your other Sony DVD recorder or player, change the command mode number for this recorder (page 25). Use the batteries correctly to avoid possible leakage and corrosion. Should leakage occur, do not touch the liquid with bare hands. Observe the following: Do not use a new battery with an old battery, or batteries of different manufacturers. Do not attempt to recharge the batteries. If you do not intend to use the remote for an extended period of time, remove the batteries. If battery leakage occurs, wipe out any liquid inside the battery compartment, and insert new batteries. Do not expose the remote sensor (marked on the front panel) to strong light, such as direct sunlight or a lighting apparatus. The recorder may not respond to the remote. When you replace the batteries of the remote, the code number and Command Mode may be reset to the default setting. Set the appropriate code number and Command Mode again.
DISPLAY
Toshiba
1 2
With TV [/1 pressed down, enter the TVs manufacturer code using the number buttons.
For instance, to enter 09, press 0 then 9. After you enter the last number, release the TV [/1 button.
TV t (input select)
24
,continued
25
1-5
D.TV Auto Channel Setting If the aerial cable is connected to the DIGITAL AERIAL IN jack (hookup A), select Auto Scan. Then, select your country/region using </,, and press ENTER. The recorder will automatically capture and store the available TV and Radio channels. If the aerial cable is connected to the ANALOG AERIAL IN jack (hookup B or C), select Do not set. For details, see page 15. A.TV Auto Channel Setting If the aerial cable is connected to the ANALOG AERIAL IN jack (hookup B or C) and the TV is connected to this recorder not using SMARTLINK, select Auto Scan. Then, select your country/ region using </,, and press ENTER. The programme position order will be set according to the country/region you set. If the aerial cable is connected to the ANALOG AERIAL IN jack (hookup B or C) and the TV is connected to this recorder with SMARTLINK, select Download from TV (For details, refer to the operating instructions supplied with your TV). Then, select your country/region using </,, and press ENTER. The tuner preset data will be downloaded from your TV to this recorder. For details, see page 15. If the aerial cable is connected to the DIGITAL AERIAL IN jack (hookup A) only, or to skip this setting, select Do not set. Then, select your country/region using </,, and press ENTER. To set the programme positions manually, see page 131.
Clock Setting The recorder will automatically set the clock when any digital channels have been scanned and stored. Go to the EPG Type Select setting. Select Auto when a programme position in your local area broadcasts a time signal. The Auto Clock Setting display appears.
Hookups and Settings
Number buttons
1 2
INPUT
Select the programme position of the station that carries a time signal using </,. Select Start using m, and press ENTER. If a clock signal cannot be found, press O RETURN, and set the clock manually.
Select Manual to set the clock manually. The Manual Clock Setting display appears.
1 2 3
Select the time zone for your area using </,, and press m. Select On if you are now on summer time, and press ENTER. Set the day, month, year, hour, and minutes using </M/m/,, and press ENTER to start the clock.
TV [/1
Turn on the recorder and your TV. Then switch the input selector on your TV so that the signal from the recorder appears on your TV screen.
The Language display appears. If the Language display does not appear, select Easy Setup in the Basic setup from Initial Setup in the System Menu (page 130).
2 3
Select a language for the on-screen displays using </M/m/,, and press ENTER.
The initial settings message appears.
EPG Type Select Select the EPG (Electronic Programme Guide) type to use. If no programme positions for digital broadcasts are found after scanning, the EPG Type Select display does not appear. The EPG type is automatically set to the country/area you select when setting the program positions.
26
,continued
27
Select Guide (Digital) to use the digital electronic programme guide (see Guide to Digital Services (For Freeview users only) on page 48). Select Guide (Digital) if you receive only digital broadcasts.
Setting up your set top box receiver for the GUIDE Plus+ system (For analogue broadcasting)
Follow the steps below to set up the GUIDE Plus+ system and set top box controller. The GUIDE Plus+ system is available in the UK only.
If you cannot get the recorder to control your set top box receiver
Check the connection and position of the set top box controller (page 17). If your set top box receiver still does not operate with this recorder, refer to the instructions supplied with your set top box receiver and contact your cable or satellite company to see if they can provide you with a compatible set top box receiver.
1
Select GUIDE Plus+ to use the Gemstar GUIDE Plus+ electronic programme guide (see GUIDE Plus+ (For analogue broadcasting only) on page 63). TV Screen Size (page 144) If you have a wide-screen TV, select Wide (16:9). If you have a standard TV, select Standard (4:3). This will determine how wide-screen images are displayed on your TV. Progressive When you connect a progressive format TV to this recorder using the COMPONENT VIDEO OUT jacks, select Compatible. HDD caution messages Read the HDD caution messages, and press ENTER.
Press GUIDE.
The GUIDE Plus+ system Basic Setup appears.
b Notes
The list of external receivers controllable by the GUIDE Plus+ system is updated constantly and is distributed through GUIDE Plus+ system data signals. Since the time your recorder has been produced and the time you installed your recorder for the first time, new external receiver codes might have been added. If the external receiver is still not on the list or is not controlled properly by the recorder, please call Customer Support to report the brand and model of your external receiver.
Select the connection you used for your set top box receiver using M/m, and press ENTER.
When the set top box receiver is connected to the recorder using hookup B with both an aerial cable and a SCART cord, select either Line1 or Antenna. The display asks for confirmation.
To fix the set top box controller to your set top box receiver
Once you have confirmed that the set top box controller controls your set top box receiver, fix it in place.
2 3
Select Postal Code, and press ENTER. Enter your postal code using </M/m/ ,, and press ENTER.
If Country is set to Others, you cannot enter a postal code and the GUIDE Plus+ system will not search for a host channel.
Attach it so that the set top box controller is directly above the remote control sensor on your set top box receiver.
5 6 7
b Note
You cannot set tuner system or OSD Language to a country/region or language that is not supported by the GUIDE Plus+ system.
Press ENTER to select Continue. Select the set top box receiver type using M/m, and press ENTER. Select the provider using M/m, and press ENTER.
28
,continued
29
1-6
1 2 3 4
Press GUIDE. The GUIDE Plus+ system Home Screen appears. Select Setup in the Menu Bar using M/ ,, and press ENTER. The GUIDE Plus+ setup menu appears. Select Basic Setup using M/m, and press ENTER. Repeat from step 2 of Setting up your set top box receiver for the GUIDE Plus+ system (For analogue broadcasting) on page 28.
to i LINE 1/DECODER
to T LINE 3 TV
DVD recorder
b Notes
Pictures containing copy protection signals that prohibit any copying cannot be recorded. If you pass the recorder signals through a VCR, you may not receive a clear image on your TV screen.
DVD recorder VCR TV
Be sure to connect your VCR to the DVD recorder and to your TV in the order shown below. To watch video tapes, watch the tapes through a second line input on your TV.
Line input 1 VCR DVD recorder TV Line input 2
The SMARTLINK features are not available for devices connected via the DVD recorders LINE 1/ DECODER jack. To watch the connected VCR or similar devices pictures through the recorder while the recorder is in standby mode, set Power Save to Off (default) in the Basic setup (page 130). When you record to a VCR from this DVD recorder, do not switch the input source to TV by pressing the TV/DVD button on the remote. If you disconnect the recorders mains lead, you will not be able to view the signals from the connected VCR.
,continued
30
31
VCR, etc.
Connecting a decoder
S-video cord (not supplied) Audio/video cord (not supplied) to AERIAL IN Aerial cable (supplied) TV External decoder (PAY-TV/ Canal Plus analogue decoder)
to LINE 2 IN
to i LINE 1/DECODER
: Signal flow
DVD recorder
z Hint When the connected equipment outputs only monaural sound, connect to only the L(MONO) and VIDEO input jacks on the front of the recorder. Do not connect the R input jack.
DVD recorder
b Notes
Do not connect the yellow LINE IN (VIDEO) jack when using an S-video cord. Do not connect the output jack of this recorder to another equipments input jack with the other equipments output jack connected to the input jack of this recorder. This may cause noise (feedback). Do not connect more than one type of video cord between the recorder and your TV at the same time.
32
,continued
33
1-7
b Notes
If you disconnect the recorders mains lead, you will not be able to view the signals from the connected decoder. To watch the connected external decoder (PAYTV/Canal Plus analogue decoder) programmes during recording, press the PROGRAM + button on the recorder (SCART THRU appears on the front panel display). To return to the previous display, press the PROGRAM button on the recorder (SCART NORM appears on the front panel display). The recorder automatically switches to the programme tuned by the recorders tuner after the recording has finished. To watch the connected external decoder (PAYTV/Canal Plus analogue decoder) programmes while the recorder is in standby mode, set Power Save to Off (default) in the Basic setup (page 130).
Number buttons
13 Select the desired programme 14 Select Channel using M/m. 15 Select the external decoder
5 6
EXIT/ O RETURN .
Press M/m to select Video or RGB, and press ENTER. Select LINE 1 In, and press ENTER.
1 2
7 8 9
Press M/m to select Decoder, and press ENTER. Press O RETURN to return the cursor to the left column. Select Analog Tuner, and press ENTER.
34
35
1. Inserting a Disc
+RW -RVideo -RWVR -RWVideo +R -RVR
2. Recording a Programme
HDD
-RVR +RW -RVideo -RWVR -RWVideo +R
b Notes
To turn off the TV Direct Rec. function, set SMARTLINK to Pass Through in the Options setup (page 150). Some buttons, such as the TITLE LIST button or H button, do not work when TV appears in the front panel display. If you press the [/1 button while recording, the recorder stops recording and turns off. After pressing the z REC button, it may take a short while to start recording. You cannot change the recording mode while recording. If there is a power failure, the programme you are recording may be erased. You cannot watch a PAY-TV/Canal Plus programme while recording another PAY-TV/ Canal Plus programme. To use the TV Direct Rec. function, you must first correctly set the recorders clock.
DVD
VCD
CD
DATA DVD
DATA CD
Z (open/ close)
DVD
This section introduces the basic operation to record a current TV programme to the hard disk (HDD) or to a disc (DVD). For an explanation of how to make timer recordings, see page 52 (Digital Mode) or page 71 (Analogue Mode).
* Available when Manual Rec. Mode is set to On (go to setup) in the Recording setup (page 141).
For more details about the recording mode, see page 71.
Press z REC.
Recording starts. When recording to the HDD, recording stops after 12 hours of continuous recording or when the HDD is full. When recording to a DVD, recording stops when the DVD is full.
HDD
DVD PROG +/
1 2
Press DVD. Press Z (open/close), and place a disc on the disc tray.
INPUT TV/DVD
To stop recording
Press x REC STOP. Note that it may take a few seconds for recorder to stop recording.
DISPLAY
TV PAUSE Recording/playing side facing down z REC x REC STOP REC MODE TV t
1 2
Press PROG +/ to select the programme position or input source you want to record.
36
37
1-8
E Title information:
Displays the title number, title thumbnail picture (playback picture for the selected title, still images for the other titles), recording date, recorded station name (or programme position number), recording mode, title name, and title size. Recording: Indicates that the title is currently being recorded. : Indicates protected title. NEW: Indicates that the title is newly recorded (not played back) (HDD only). : Press DISPLAY to display . indicates titles containing Copy-Once copy protection signals (HDD only) (page 99). : Indicates that the title is recorded using the Update function. Genre icons: Indicates the titles genre (HDD only).
1 2 3
Press < while the Title List is displayed. Select Sort Titles using M/m, and press ENTER. Select the item using M/m, and press ENTER.
Order By Date Sorted In order of when the titles were recorded. The title that is recorded most recently is listed at the top. In order of when the titles were recorded. The title that is recorded most recently and has not been played is listed at the top. Playlist titles are not displayed. In alphabetical order. In order of recorded title number. Eight Basic Operations Getting to Know Your DVD Recorder
To play a recorded title, select the title from the Title List.
HDD
DVD
m
8-Title List
TITLE LIST EXIT/ O RETURN . H X PLAY MODE </M/m/,, ENTER DISPLAY > x
Unseen Title
F Remaining time of the current disc in the current recording mode (example: SP mode) A Disc type:
Displays the media type, HDD or DVD.
By Title By Number
1 2 3
Press < while the Title List is displayed. Select Genre using M/m, and press ENTER. Select a genre using M/m, and press ENTER.
To stop playback
Press x (stop).
D Scroll bar:
Appears when all of the titles do not fit on the list. To view the hidden titles, press M/m.
1 2
1 2
Press < while the Title List is displayed. Select Play List using M/m, and press ENTER.
Press TITLE LIST. For DVD-RWs/DVD-Rs (VR mode), switch the Title Lists, if necessary. Select a title, and press ,. The sub-menu appears.
38
,continued
39
3 4
Select Edit using M/m, and press ENTER. Select Set Thumbnail using M/m, and press ENTER. The display for setting the thumbnail point appears and the title starts to play. While watching the playback picture, press H, X or c m/M C to select the scene you want to set for a thumbnail picture, and press X. Playback pauses. You can also select a scene using the PLAY MODE button (page 89). Select OK using M/m, and press ENTER. The scene is set for the titles thumbnail picture. To return to the Title List, press O RETURN.
During playback
z Hints When On Screen Display is set to On (default) in the Options setup (page 149), information automatically appears on the screen when the recorder is operated. To increase disc space, see To open up disc space (page 92).
b Note
Playing time of MP3 audio tracks may not be displayed correctly.
DVD
VCD
CD
You can check the playing time of the current title, chapter, track, or disc. Also, you can check the disc name recorded on the DVD/ CD.
A Playing status B Shows that the Resume Play is available (page 81). C Current selected recording mode (remaining DVD recording time/disc type) (page 71) D Remaining time E Station name and programme position number F Audio setting for the current programme
G Recording restrictions for the current programme H TV mode or DVD mode (page 25) I Disc information J Title type (Original or Playlist) for DVD-RW/DVD-R in VR mode K Disc type/format (page 10)
Displays the finalised disc in Video mode as DVD-Video.
b Notes
The title names may not appear for DVDs created on other DVD recorders. It may take a few seconds for the thumbnail pictures to be displayed. After editing, the title thumbnail picture may change to the first scene of the recording (title). After dubbing, the title thumbnail picture set on the source recording is cancelled.
In stop mode
Example: DVD-RW in VR mode
L Title number-Chapter number (page 89) M Playing time N Multi-angles indicator (page 80) O Copy-protected indicator (page 99) P Data transfer bar and rate
40
41
1-9
You can label a DVD, title, or programme by entering characters. You can enter up to 64 characters for a title recorded in the HDD/ DVD-RW/DVD-R (VR mode), 40 characters for a title recorded in the DVD+RW/DVDRW (Video mode)/DVD+R/DVD-R (Video mode), but the actual number of characters displayed in the menus such as the Title List will vary. The steps below explain how to change the name of the recorded programme.
Move the cursor to the point where you want to insert the character using m/M.
To erase all of the characters, press and hold CLEAR for 2 seconds or more.
In step 7 above, press a number button repeatedly to select a character. Example: Press the number 3 button once to enter D. Press the number 3 button three times to enter F. Press ENTER and select the next character. Press x (or select OK, and press ENTER).
2 3
6
TITLE LIST
Labelling a disc
+RW -RVideo -RWVR -RWVideo +R -RVR
EXIT/ O RETURN . m X
Press </M/m/, to select the character you want to enter, and press ENTER.
The selected character appears at the input row. To insert a space, press X (or select Space, and press ENTER).
1 2 3
Insert a disc.
See 1. Inserting a Disc on page 36.
1 2 3
42
,continued
43
+R -RVideo
Finalising is necessary when playing on any equipment other than this recorder. After finalising, you cannot edit or record on the disc.
5 6
Select Input Disc Name, and press ENTER. Select Next Screen, and press ENTER.
Enter the disc name (page 42).
b Note
You can enter up to 64 characters for a DVD-RW/ DVD-R (VR mode) disc name, and 40 characters for a DVD+RW/DVD-RW (Video mode)/DVD+R/ DVD-R (Video mode) disc name. The disc name may not appear when the disc is played on other DVD equipment.
Finalising is necessary when you play discs recorded with this recorder on other DVD equipment. When you finalise a DVD+RW, DVD-RW (Video mode), DVD+R, or DVD-R (Video mode), a DVD menu will be automatically created, which can be displayed on other DVD equipment. Before finalising, check the differences between the disc types in the table below.
6 7
Differences between disc types Select On, and press ENTER. Press SYSTEM MENU to exit.
+RW
Protecting a disc
-RWVR -RVR
Discs are automatically finalised when removed from the recorder. However, you may need to finalise the disc for certain DVD equipment, or if the recording time is short. You can edit or record on the disc even after finalising. Finalising is unnecessary when playing a disc on VR format compatible equipment. Even if your other DVD equipment is VR format compatible, you may need to finalise the disc, especially if the recording time is short. You can edit or record on the disc even after finalising. Finalising is necessary when playing on any equipment other than this recorder. After finalising, you cannot edit or record on the disc. If you want to record on it again, unfinalise (page 46) or reformat the disc (page 47). However, if you reformat the disc, all recorded contents will be erased. Finalising is necessary. The disc can be played only on equipment that supports DVD-R in VR mode. After finalising you cannot edit or record on the disc using this recorder.
1 2 3
Insert a disc.
See 1. Inserting a Disc on page 36.
1 2 3
Insert a disc.
See 1. Inserting a Disc on page 36.
-RVR
44
,continued
45
1-10
b Note
The recorder is not able to unfinalise DVD-RWs (Video mode) that have been finalised on another recorder.
8. Reformatting a Disc
+RW -RWVR -RWVideo -RVR -RVideo
1 2 3
Insert a disc.
See 1. Inserting a Disc on page 36.
(DVD+RW/DVD-RW (Video mode)/ DVD+R/DVD-R (Video mode) only) Select a title menu style, and press ENTER.
The menu appears in the selected title menu style when the top menu (or menu for a DVD+RW/DVD+R) is selected on the DVD equipment.
New discs are automatically formatted when inserted. If necessary, you can manually reformat a DVD+RW, DVD-RW, or DVD-R disc to make a blank disc. For DVD-RWs or DVD-Rs, you can select a recording format (VR mode or Video mode) according to your needs.
8 9
(DVD+RW/DVD-RW (Video mode)/ DVD+R/DVD-R (Video mode) only) Select Yes, and press ENTER.
The recorder starts finalising the disc.
6 4
Select Finalise, and press ENTER.
SYSTEM MENU </M/m/,, ENTER
z Hint You can check whether the disc has been finalised or not. Press DISPLAY after step 1 (page 40).
b Notes
Depending on the condition of the disc, recording, or the DVD equipment, discs may not play even if the discs are finalised. The recorder may not be able to finalise the disc if it was recorded on another recorder. Inserting an unfinalised disc into other DVD equipment may damage the recorded contents. When using a DVD+RW, you can edit or record on the disc even after finalising. However, the title menu will not be displayed. Finalise the disc again to display the title menu.
z Hint By reformatting, you can change the recording format on DVD-RWs, or record again on DVDRWs that have been finalised.
1 5
Select Unfinalise, and press ENTER.
Insert a disc.
See 1. Inserting a Disc on page 36.
2 3
Unfinalising a disc
-RWVR -RWVideo
46
47
1
Guide to Digital Services
(For Freeview users only)
Press GUIDE.
This display consists of an information box and an 8-channel programme list covering a 30-minute period. Example of EPG Display:
z Hint You can display the channel list by pressing the ENTER button while watching a programme. To watch another channel, select a channel using </ M/m/,, and press ENTER.
Programme Information
The programme information display provides a quick and easy way to: View descriptions of the programmes being broadcast now and next on the current channel. View descriptions of the programmes being broadcast now and next on the other channels.
O RETURN
A Indicates the currently selected channel number and station name with the programme title and genre. B Indicates the currently selected programme and allows you to move around the list. C Channel name D Indicates if a timer recording is associated with the programme (page 55). E Colour buttons F Indicates that short programmes that are not displayed on the list are scheduled. G Truncated programme title in case the name is too long to be displayed in the cell. H Time slot I Indicates the current time and date.
1 2 3 4
Press the green button while the programme list is displayed. Select a date in the Date row. Select a time in the Time row. Select Jump, and press ENTER. The programme list for the specified date and time is displayed.
INFO </M/m/,, ENTER
b Note
Digital Services availability and content depend on the broadcaster. Digital Services are not instantly available when the recorder is first turned on.
1 2 3 4 5 6 7
Press the yellow button while the programme list is displayed. Select a date in the Date row. Select a time in the Time row. Select the Genre row, and press ENTER. The genre list is displayed. Select a genre using </M/m/,, and press ENTER. Select OK, and press ENTER. Select Search, and press ENTER. The programme list for the specified genre is displayed.
1 2
48
,continued
49
1-11
Once the text page is displayed (this may take some time), follow the onscreen instructions to obtain your required selection.
On some pages the TV programme may also be displayed on the text screen. Onscreen instructions will inform you how to change the displayed programme. If you are instructed to press OK or Select when viewing the text pages, press ENTER.
</,
ENTER INFO
b Note
The appearance, content and navigation methods of all digital text services are decided by the broadcaster.
Number buttons
PROG +/
1 2 3
Select a channel. Press (text) or the button indicated on screen by the broadcaster.
The text information appears.
Access required information using </M/m/,, the colour buttons and/ or the number buttons.
If you are instructed to press OK or Select when viewing the text pages, press ENTER.
50
51
Timer Recording
(For Freeview users only)
Approx. recording time (hours) Recording mode HDD RDR- RDR- RDR- RDRHXD HXD HXD HXD 770 870 970 1070 25 R 37 51 34 50 68 53 79 105 105 155 210 1 hr. 1 min. 1 hr. 30 min. 2 DVD*1
b Notes
The maximum continuous recording time to the HDD is 12 hours for a single title. A title longer than 12 hours is divided. Situations below may cause slight inaccuracies with the recording time. Recording a programme with poor reception, or a programme or video source of low picture quality. Recording on a disc that has already been edited. Recording only a still picture or just sound. Programmes are recorded in the following aspect ratio. In the original aspect ratio, when recording to the HDD (when HDD Recording Format is set to Video Mode Off in the Recording setup (page 144))/DVD-RWs/DVD-Rs (VR mode). In 4:3 when recording to DVD+RWs/DVD+Rs. When recording to DVD-R DLs (Video mode), the title is divided when the layer switches.
Before Recording
Before you start recording
Check that the disc has enough available space for the recording (page 40). For the HDD, DVD+RWs, and DVD-RWs, you can free up disc space by erasing titles (page 92). Adjust the recording picture quality if necessary (page 59).
HQ (High quality) HSP SP (Standard mode) LSP ESP LP EP SLP SEP*2 (Long duration)
*1
b Notes
To play a recorded disc on other DVD equipment, finalise the disc (page 45). If digital teletext is operated while recording, its contents will be recorded on the disc. If the subtitles are displayed while recording, they will be recorded on the disc.
2 hr. 30 min. 3 4 6 8
Unrecordable pictures
Pictures with copy protection cannot be recorded on this recorder.
Copy control Recordable discs signals Copy-Free
HDD
-RWVideo -RVideo +RW +R -RWVR -RVR
You can set the timer for a total of 32 programmes, up to 30 days in advance. There are three methods to set the timer: the standard method, EPG method and Series Recording method. Standard: Set the date, time, and programme position of the programme manually. EPG: Set a programme to be recorded based on the information provided by the EPG (Electronic Programme Guide) (page 55). Series Recording: Automatically sets the recorder to record programmes in a series (page 57).
Recording mode
Like the standard 3 recording modes of video tapes, you can select the desired recording mode using the REC MODE button. Recording modes with higher quality provide a more beautiful recording, but the large data volume also results in a shorter recording time. Conversely, a longer duration provides a longer recording time, but the lower data volume results in a coarser picture quality.
1060 10
The approximate recording time is for 12 cm DVD discs. The approximate recording times for DVD+R DL (Double Layer)/DVD-R DL (Dual Layer) discs are as follows: HQ: 1 hour 51 minutes HSP: 2 hours 41 minutes SP: 3 hours 35 minutes LSP: 4 hours 29 minutes ESP: 5 hours 23 minutes LP: 7 hours 11 minutes EP: 10 hours 46 minutes SLP: 14 hours 21 minutes SEP: 17 hours 57 minutes *2 When recording to DVD+RW or DVD+R, SLP is the longest recording time available. If you select SEP, the recording mode will automatically revert to SLP. z Hint To easily select a manual recording mode, press REC MODE repeatedly to display MN, and select a manual recording mode using </,.
Copy-Once
HDD
-RWVR (CPRM*) -RVR
(CPRM*)
TIMER </M/m/,, ENTER
Copy-Never
None
* The recorded disc can be played only on CPRM compatible equipment (page 10).
x REC STOP
52
,continued
53
1-12
Press TIMER.
The Timer List display appears.
Record to: Sets the recording destination. If there is not enough available DVD disc space for the recording, the recorder automatically records the programme to the HDD even if you select DVD (Recovery Recording). Recording Mode: Sets the recording mode (page 52). VPS/PDC: Sets the VPS/PDC function. See About the VPS/PDC function (For analogue broadcasting only) below. Update: Sets the recorder automatically replacing the previous timer recording with the new one. EPG Link (page 58) Series Recording (page 57) To enter a title name, select Set Title Name and press ENTER (page 42). If you make a mistake, select the item and change the setting.
4 3
Select an item using </, and adjust using M/m. Then press ENTER.
The adjustable items are listed below. Pr/CH: Sets the programme position and the source. Date: Sets the date (up to 30 days later). Select a recording pattern by pressing M repeatedly to set the timer for the same daily or weekly programmes. Start: Sets the start time. Stop: Sets the stop time. Extend: Sets duration when a timer recording is in progress. If the programme set to be recorded daily or weekly is extended, the manually extended time set here will be added to the subsequent timer recording times. Note that when VPS/PDC is set to On, you cannot make the Extend setting. If you want to make the detailed settings, select Set Details and press ENTER. Select an item using M/m and set using </,.
b Notes
If a message indicating that the HDD is full appears on the screen, change the recording destination to DVD, or make available space for the recording (page 92). Check that the clock is correctly set before setting the timer recording. If not, the timer recording cannot be made. To record a satellite programme, turn on the satellite tuner and select the satellite programme you want to record. Leave the satellite tuner turned on until the recorder finishes recording. Even if the timer is set for the same daily or weekly programme, the timer recording cannot be made if it overlaps with a programme that has priority. Overlap will appear next to the overlapped setting in the Timer List. Check the priority order of the settings (page 60). Even if the timer is set, timer recordings cannot be made while recording a programme that has priority. The beginning of some recordings may not be made when using the VPS/PDC function. You cannot extend the recording duration time when VPS/PDC is set to On. The Rec. Mode Adjust function only works with a timer recording and the VPS/PDC function set to off. It does not function with Quick Timer. The recording mode cannot be set to AUTO when VPS/PDC is set to On.
x REC STOP
Press GUIDE.
54
,continued
55
Series Recording
Automatically record programmes in a series.
Press GUIDE.
b Notes
This function cannot be used when the broadcaster does not include series information with the programme data. Whether or not a programme is in a series is determined by the broadcaster.
If you want to change the setting, press </, to select the item and press M/m to change the setting (page 54). EPG Link (page 58) Series Recording (page 57)
To extend the recording duration time while recording (only when EPG Link is set to Off)
See page 54.
To confirm, change, or cancel timer recording (only when EPG Link is set to Off)
See Checking/Changing/Cancelling Timer Settings (Timer List) (page 60).
z Hint The Rec. Mode Adjust function also works with this timer method (page 55).
Red button GUIDE TIMER </M/m/,, ENTER EXIT/ O RETURN
2 3
Select a programme using </M/m/,. Press the red button. The date, start and stop times, programme position, recording mode, etc., settings appear.
b Note
The EPG programme start and end time are determined by the broadcaster.
4 5 6
Select Set Details, and press ENTER. Set Series Recording to On, and press O RETURN. Select OK, and press ENTER. The selected programme is set for recording and appears in the Timer List (page 60). The other programmes in the series will be set for recording (appear in the Timer List) as each previous recording is completed. For example, if there are three programmes in a series, the second programme will be set for recording only after the first recording is finished. The third programme will be set for recording only after the second recording is finished. You can search for link programmes using Series Search (page 58).
Your recorder will automatically begin recording when the programme starts. To modify the timer setting, see page 60. Some examples of timer event icon types are: (red): Indicates that the whole programme is set to be recorded. (grey): Indicates that the programme is set to be recorded using Series Recording (page 57).
56
,continued
57
1-13
EPG Link
Automatically update the date, start and stop times settings when changing the Electronic Programme Guide. Set EPG Link to On in step 5 of Series Recording on page 57. Recording Split Programmes Movies and other programmes that are split into 2 or more parts are called Split Programmes. If you set the timer for one part of a Split Programme, the other parts are automatically recorded. For example, if the first half is set to be recorded, the last half will be recorded automatically. To search for link programmes
1 2
Select Memory1, Memory2, or Memory3 in step 3. Select Detailed Settings, and press ENTER. The display for adjusting detailed settings appears. Select an item using M/m, and adjust settings using </,. For details about each setting, see the explanation of the display. Prog. Motion: Adjusts the progressive video signal when Component Video Out is set to Progressive (page 136). Select Motion for a picture, including subjects that move dynamically. Select Still for a picture with little movement. Cinema: Converts the progressive video signal to match the type of DVD software that you are watching when Component Video Out is set to Progressive (page 136). Select Auto to detect the software type (Film-based or Video-based) automatically and select the appropriate conversion mode. Normally select this position. Select Off to fix the conversion mode to the mode for Video-based software. Press SYSTEM MENU to exit. The setting is automatically stored as the setting you selected in step 1.
b Note
Only progressive video signals for recording can be adjusted.
(normal recording)
1 2 3
Press TIMER. Select the timer setting, and press ,. When the following options appear in the sub-menu, select an option, and press ENTER. Alternate Search: Searches for repeat programmes. The repeat programmes are displayed in the EPG. Series Search: Searches for programmes in a series. The programmes in the series are displayed in the EPG. Recommendation Search: Searches for programmes recommended by broadcaster as a link for current series. The recommended programmes are displayed in the EPG. To set the programme for recording, follow the instructions for Recording TV programmes using the EPG (page 55) from step 2.
The time counter decreases minute by minute to 0:00, then the recorder stops recording (the power turns off).
b Note
If you turn off the recorder during recording, recording is stopped.
1 2 3
Select Picture Adjustment, and press ENTER. Select a preset setting, and press ENTER.
Tuner: TV broadcasts VCR: Video cassettes DTV: Digital broadcasts Memory1/Memory2/Memory3: Your own settings. To create your own settings, see To create your own setting on page 59. To check the detailed settings for the selected preset, press DISPLAY.
b Notes
Only the earliest part of the Split Programme is displayed on the Timer List. Any next Split Programme part that starts 3 or more hours later cannot be recorded automatically. This recorder is featured with an EPG timer auto extend functionality that allows EPG timer recordings to be made in case of an early start (before the scheduled start time) or late finish (after the scheduled end time). When EPG Link is set to On, you cannot change the date, start and stop time settings.
58
59
2 3
You can check, change, or cancel the timer settings using the Timer List.
z Hints For manual timer settings, you cannot modify the timer setting for the current recording, but you can extend the duration of the recording time while recording (page 56). For timer settings using the EPG, you can modify the timer setting for the current recording while recording, and extend the duration of the recording (only when EPG Link is set to Off). You can move to the first row/bottom row of the Timer List using ./> while the list is displayed.
b Note
You cannot change the timer settings with EPG Link set to On.
b Notes
When VPS/PDC is set to On for one or more timer recordings, the start times may change in the event of a broadcast delay or early start. Even if the timer is set, timer recordings cannot be made while recording a programme that has priority. Even if the timer is set for the same daily or weekly programme, the timer recording cannot be made if it overlaps with a programme that has priority. Overlap will appear next to the overlapped setting in the Timer List. Check the priority order of the settings.
You can record from a connected VCR or similar device. To connect a VCR or similar device, see Connecting a VCR or Similar Device on page 31. Use the DV IN jack on the front panel if the equipment has a DV output jack (i.LINK jack).
HDD
DVD
INPUT
Erase: Erases the timer setting. Select Yes and press ENTER. Skip Once: Cancels the daily or weekly recordings only once. After cancelling the timer setting, Skip Once appears next to the timer setting in the Timer List. Alternate Search (page 58) Series Search (page 58) Recommendation Search (page 58) To change or cancel the setting, repeat steps 2 and 3 above.
REC MODE
Press TIMER.
The Timer List display appears.
1 2
Press INPUT to select an input source according to the connection you made.
The front panel display changes as follows:
programme position
Timer information displays the recording date, time, recording mode, etc. When all of the timer settings do not fit on the list, the scroll bar appears. To view the hidden timer settings, press M/m.
60
,continued
61
1-14
Select the desired audio signal when recording a bilingual programme to the HDD or DVD-RWs/DVD-Rs (Video mode).
Set External Audio to Bilingual and Bilingual Recording to A/L or B/R in the Audio In setup (page 138).
4 5 6 7
Insert the source tape into the connected equipment and set to playback pause. Press z REC.
This recorder starts recording.
Press the pause (or play) button on the connected equipment to cancel the playback pause status.
The connected equipment starts playback and the playback image is recorded by this recorder. To stop recording, press x REC STOP on this recorder.
A Video Window: This shows the programme you were watching when you pressed GUIDE. B Action Bar: When the same colour button on the remote is pressed, the Action Bar functions. The Action Bar function differs according to the screen. C Information Box: Shows information about the selected programme when the Home Screen is displayed. Contents will differ according to the displayed screen. D Menu Bar: Press the blue button (Home), and press M to move the cursor to the Menu Bar. Then select one of the following features using </ ,, and press ENTER. Grid: Shows the programmes for the current time slot and next 7 days. Search: Allows you to search for titles by category or by keyword (page 66). The displayed category depends upon the programme data received by this recorder. Movies, Sport, and Children are examples of possible categories. My TV: Sets the profile for your favourite programmes (page 67). Schedule: Displays the list of timer settings (page 77).
,continued
b Notes
When recording a video game image, the screen may not be clear. Any programme that contains a Copy-Never copy guard signal cannot be recorded. When Bilingual Recording is set to A/L or B/R in step 3, you cannot select the sound when playing in the following cases. When recording in PCM mode. When recording to the HDD (HDD Recording Format is set to Video Mode On in the Recording setup (page 144))/DVD+RW/ DVD+R/DVD-RW/DVD-R (Video mode). You cannot select L1 in step 2 if LINE 1 In is set to Decoder in the Video In/Out setup (page 137).
62
63
Info: Shows information when available. Editor: Allows you to edit the channel lineup and channel display (page 69). Setup: Allows you to change the language, country/region, postal code, input source, or host channel. E Home position: When you press the blue button (Home), the cursor returns to the last programme position on the Grid. F Tiles: Shows the programme titles and category; green (sports), purple (movies), blue (childrens), teal (others). G Broadcast station Logo: Shows the broadcast station logo. H Time Slot: Indicates the currently selected time slot. Use </, to select a different time slot.
z Hint You can also move the cursor to the Menu Bar by pressing MENU.
Check the following if the programme guide data has not been received after waiting for a day: Easy Setup (page 26) is completed. The host channel is not disabled (see Disabling programme positions on page 70). The timer is not set. If the programme guide data still cannot be received after checking the above, search for the host channel at the following website and set the host channel manually (page 69): www.europe.guideplus.com If the host channel has changed or moved, the programme guide data cannot be received. In this case, follow the steps in Searching for the GUIDE Plus+ host channel (page 68) to update the host channel setting. If the set top box receiver is connected to the recorder using a SCART cord only, do the following: Turn on your set top box receiver. Connect the set top box controller. Follow the steps in Changing the GUIDE Plus+ host channel manually (page 69) to set the host channel manually. Be sure to set your set top box receiver (tuner) as the source.
1 2
Press GUIDE. The GUIDE Plus+ system Home Screen appears. Press the yellow button (Channels).
Press GUIDE.
The GUIDE Plus+ system Home Screen appears.
Select the TV broadcast station logo using </M/m/,, and press ENTER. The display returns to Grid and the programme currently being broadcast by the selected TV station is selected. Select a programme using </,, and press ENTER.
Troubleshooting guide
If you are having trouble displaying the television programme list, please check the following: The clock must be set correctly. If the clock is not set, set it manually (page 129). This recorder downloads the GUIDE Plus+ data several times a day when the recorder is turned off (standby mode). Turn off the recorder when you are not using it (for example, at night). After initial setup (page 26), it may take up to 24 hours for your recorder to start receiving programme listings. It may take up to one day to receive all seven days of TV programme listings.
b Notes
Your set top box receivers programme position may suddenly change even if the recorder is turned off. This is because the set top box controller has changed the programme position to receive the GUIDE Plus+ data. When you reset the recorder (page 158) the following GUIDE Plus+ system settings are reset: Country/region setting in Easy Setup Country of Setup - Basic Setup in the Menu Bar Postal Code of Setup - Basic Setup in the Menu Bar Note that the GUIDE Plus+ system is also reset when you make changes to the host channel settings. The GUIDE Plus+ system cannot be used when Input Line System is set to NTSC in the Basic setup (page 130).
Press GUIDE.
z Hints Press the PAGE +/ buttons to change the programme list by page. Press the DAY +/ buttons to change the programme list by day.
64
,continued
65
1-15
1 2 3
Select Search in the Menu Bar, and press ENTER. Select My Choice using </,. Press the yellow button (Add). The display for entering characters appears.
b Notes
The Video Window is locked during recording and the lock indicator appears in the Video Window. You cannot unlock the Video Window while recording. If you are watching programmes through a set top box receiver, the Video Window may not change as fast as you move the cursor. In this case, lock the Video Window (page 66).
Colour buttons
</M/m/,, ENTER
Select a character on the keyboard using </M/m/,, and press ENTER. To switch between upper-case, lowercase, or characters with accents, press the yellow button (Keyboard) repeatedly. To cancel entering a new keyword, press the red button (Back). Repeat step 4 to enter the keyword. Press the green button (Save). The entered keyword is registered. To delete the keyword, select the keyword you want to delete, and press the red button (Delete). To change the keyword, select the keyword you want to change, and press the green button (Edit).
Setting a profile
5 6
Select My TV in the Menu Bar, and press the yellow button (Profile).
66
,continued
67
Select Channels, Categories, or Keywords, and press the yellow button (Add).
Channels: Select the programme position using </M/m/,, and press ENTER. To add more programme positions, press the yellow button (Add). You can register up to 16 programme positions. To cancel the registration, select a programme position, and press the red button (Delete). Categories: Select the category using </M/m/,, and press ENTER. To add more categories, press the yellow button (Add). You can register up to 4 categories. To cancel the registration, select a category, and press the red button (Delete). Keywords: Enter a keyword. See To enter a new keyword on page 67. To add more keywords, press the yellow button (Add). You can register up to 16 keywords. To cancel the registration, select a keyword, and press the red button (Delete).
Wait for one day until the programme guide data can be received.
If the programme guide data has not been received after waiting for a day, search for the host channel at the following website and set the host channel manually (Changing the GUIDE Plus+ host channel manually (page 69)). www.europe.guideplus.com
Colour buttons
</M/m/,, ENTER
1 2
Select Setup in the Menu Bar, and press ENTER. Select GUIDE Plus+ system Information using M/m, and press ENTER.
1
Searching for the GUIDE Plus+ host channel
The default host channel setting is set to Automatic, so you should not have to change the host channel setting. However, if the host channel has changed or moved, update the host channel setting. If the set top box receiver is connected to the recorder using a SCART cord only (page 17), see Changing the GUIDE Plus+ host channel manually on page 69.
2 3
Select Host Channel Setup using M/ m, and press ENTER. Press the yellow button (Change) twice.
Manual appears.
Press ENTER.
1 2 3 4
1 2
Select Host Channel Setup using M/ m, and press ENTER. Press the yellow button (Reset). Press [/1 to turn off the recorder.
4 5 6 7 8
Select Source using ,. Press the yellow button (Source) repeatedly to select the input source. Select Prog. No. using ,. Enter the programme position number using the number buttons. Press the green button (Save).
The display asks for confirmation.
2 3
68
69
1-16
Approx. recording time (hours) Recording mode HDD RDR- RDR- RDR- RDRHXD HXD HXD HXD 770 870 970 1070 25 R 37 51 34 50 68 53 79 105 105 155 210 1 hr. 1 min. 1 hr. 30 min. 2 DVD*1
Before Recording
Before you start recording
Check that the disc has enough available space for the recording (page 40). For the HDD, DVD+RWs, and DVD-RWs, you can free up disc space by erasing titles (page 92). Adjust the recording picture quality if necessary (page 76).
HQ (High quality) HSP SP (Standard mode) LSP ESP LP EP SLP SEP*2 (Long duration)
*1
b Note
To receive from the recorder a programme position that can be received by either the set top box receiver or the recorder, change the input source in step 4.
b Note
To play a recorded disc on other DVD equipment, finalise the disc (page 45).
Recording mode
Like the standard 3 recording modes of video tapes, you can select the desired recording mode using the REC MODE button. Recording modes with higher quality provide a more beautiful recording, but the large data volume also results in a shorter recording time. Conversely, a longer duration provides a longer recording time, but the lower data volume results in a coarser picture quality.
1 2 3
Select Editor in the Menu Bar, and press ENTER. In the left column, select the programme position you want to hide or display using M/m. Press the red button (On/Off).
The disabled positions will turn grey. To show the disabled positions, press the red button (On/Off) again.
1060 10
b Notes
You cannot record a programme position if it is not set in Aerial Reception Settings (Analog Tuner) (page 133) even if it is set to On in the Editor in the Menu Bar. If you are using your set top box receiver to receive programmes (when the set top box receiver is connected to the recorder using a SCART cord only, page 17) and are able to receive the same programme with both the set top box receiver and the recorder, change the Source to receive the programme with the recorders tuner.
The approximate recording time is for 12 cm DVD discs. The approximate recording times for DVD+R DL (Double Layer)/DVD-R DL (Dual Layer) discs are as follows: HQ: 1 hour 51 minutes HSP: 2 hours 41 minutes SP: 3 hours 35 minutes LSP: 4 hours 29 minutes ESP: 5 hours 23 minutes LP: 7 hours 11 minutes EP: 10 hours 46 minutes SLP: 14 hours 21 minutes SEP: 17 hours 57 minutes *2 When recording to DVD+RW or DVD+R, SLP is the longest recording time available. If you select SEP, the recording mode will automatically revert to SLP. z Hint To easily select a manual recording mode, press REC MODE repeatedly to display MN, and select a manual recording mode using </,.
70
,continued
71
b Notes
The maximum continuous recording time to the HDD is 12 hours for a single title. A title longer than 12 hours is divided. Situations below may cause slight inaccuracies with the recording time. Recording a programme with poor reception, or a programme or video source of low picture quality. Recording on a disc that has already been edited. Recording only a still picture or just sound. Programmes are recorded in the following aspect ratio. In the original aspect ratio, when recording to the HDD (when HDD Recording Format is set to Video Mode Off in the Recording setup (page 144))/DVD-RWs/DVD-Rs (VR mode). In 4:3 when recording to DVD+RWs/DVD+Rs. When recording to DVD-R DLs (Video mode), the title is divided when the layer switches.
Press GUIDE.
NICAM system
To record a NICAM programme, be sure to set NICAM Select to NICAM (default) in the Audio In setup. If the sound is not clear when listening to NICAM broadcasts, set NICAM Select to Standard (page 137).
z Hint You can select the audio (main or sub) while recording bilingual programmes using the AUDIO button. This does not affect the recorded sound.
There are two methods to set the timer within the GUIDE Plus+ system: One Button Recording and setting the timer manually. You can set the timer for a total of 32 programmes (8 programmes when using the VPS/PDC function), up to 30 days in advance.
b Notes
When the recorder is connected to a set top box receiver and you want to record using the GUIDE Plus+ system, turn on the set top box receiver and connect the set top box controller. Do not operate your set top box receiver just before or during a timer recording. This may prevent the accurate recording of a programme.
Copy-Once
HDD
-RWVR (CPRM*) -RVR
(CPRM*)
Copy-Never
None
Colour buttons GUIDE </M/m/,
* The recorded disc can be played only on CPRM compatible equipment (page 10).
72
73
1-17
Select the input source using M/m, and select the programme position using the number buttons or M/m.
You can also select the programme position using the yellow button (Channels).
Number buttons
8
Colour buttons GUIDE </M/m/,, ENTER
(normal recording)
9
z REC x REC STOP
b Notes
If a message indicating that the HDD is full appears on the screen, change the recording destination to DVD, or make available space for the recording (page 92). If there is not enough available DVD disc space for the recording, the recorder automatically records the programme to the HDD even if you select DVD (Recovery Recording). The last recording mode you selected manually becomes the default recording mode for timer recordings made from the GUIDE Plus+ system. You cannot adjust the recording quality (HDD or DVD) once the recording starts. The beginning of some recordings may not be made when using the VPS/PDC function. You cannot extend the recording duration time when VPS/PDC is selected (page 78). The Rec. Mode Adjust function only works with a timer recording to DVD, and the VPS/PDC function set to off. The recording mode cannot be set to AUTO when VPS/PDC is set to On.
The time counter decreases minute by minute to 0:00, then the recorder stops recording (the power turns off).
1 2 3
b Note
If you turn off the recorder during recording, recording is stopped.
4 5 6
Set the date using the number buttons and </M/m/,. Then press the green button (Next). Set the start time using the number buttons and </M/m/,. Then press the green button (Next). Set the stop time using the number buttons and </M/m/,. Then press the green button (Next).
74
,continued
75
1 2
Select Memory1, Memory2, or Memory3 in step 3. Select Detailed Settings, and press ENTER. The display for adjusting detailed settings appears. Select an item using M/m, and adjust settings using </,. For details about each setting, see the explanation of the display. Prog. Motion: Adjusts the progressive video signal when Component Video Out is set to Progressive (page 136). Select Motion for a picture, including subjects that move dynamically. Select Still for a picture with little movement. Cinema: Converts the progressive video signal to match the type of DVD software that you are watching when Component Video Out is set to Progressive (page 136). Select Auto to detect the software type (Film-based or Video-based) automatically and select the appropriate conversion mode. Normally select this position. Select Off to fix the conversion mode to the mode for Video-based software. 3-D Y/C: Adjusts the brightness/ colour separation for the video signals. Select Motion for a picture, including subjects that move dynamically. Select Still for a picture with little movement. YNR (luminance noise reduction): Reduces noise contained in the luminance element of the video signal. CNR (chroma noise reduction): Reduces noise contained in the chroma element of the video signal. Detail: Adjusts the sharpness of images outlines. White AGC: Turn on for automatic white level adjustment. White Enhancer: Adjusts the intensity of white. Black Enhancer: Adjusts the intensity of black.
Black Level: Selects the black level (setup level) for the NTSC video signals. Select ON to raise the standard black level. Select this when the picture appears too dark. Select OFF to set the black level of the input signals to the standard level. Normally, select this position. Hue: Adjusts the colour balance. Chroma Level: Makes the colours deeper or lighter.
Press SYSTEM MENU to exit. The setting is automatically stored as the setting you selected in step 1.
You can change or cancel timer settings using the SCHEDULE list.
Number buttons
1 2 3
Select Picture Adjustment, and press ENTER. Select a preset setting, and press ENTER.
Tuner: TV broadcasts VCR: Video cassettes DTV: Digital broadcasts Memory1/Memory2/Memory3: Your own settings. To create your own settings, see To create your own setting on page 76. To check the detailed settings for the selected preset, press DISPLAY.
1 2
76
,continued
77
1-18
Select the timer setting you want to change using M/m, and press the green button (Edit).
b Notes
The new settings become effective when you exit the GUIDE Plus+ system. When you set the recording destination to HDDr, the previous timer recording will be replaced with the new one even if you have not watched it.
Select the desired audio signal when recording a bilingual programme to the HDD or DVD-RWs/DVD-Rs (Video mode).
Set External Audio to Bilingual and Bilingual Recording to A/L or B/R in the Audio In setup (page 138).
4 5 6 7
In the left column, select an item using the red button (Back) or the green button (Next), and adjust using the number buttons or </M/m/ ,.
You can change the date, start time, stop time, programme position, or input source. The cursor moves to the right column.
To use the VPS/PDC function Select VPS / PDC in step 7 above. When you turn on this function, the recorder starts scanning the channels before the timer recording starts.
Insert the source tape into the connected equipment and set to playback pause. Press z REC.
This recorder starts recording.
Timer Recording (For analogue broadcasting only)
HDD
DVD
INPUT
Press the pause (or play) button on the connected equipment to cancel the playback pause status.
The connected equipment starts playback and the playback image is recorded by this recorder. To stop recording, press x REC STOP on this recorder.
1 2 3
Select the timer setting you want to cancel using M/m, and press the red button (Delete).
z REC x REC STOP REC MODE
1 2
6 7
Press , to display Timing. Press the green button (Timing) repeatedly to select the duration time or to set the VPS/PDC function.
See About the VPS/PDC function below. If you want to record to a particular HDD genre, press the yellow button (Genre) repeatedly.
Press INPUT to select an input source according to the connection you made.
The front panel display changes as follows:
programme position
b Notes
When recording a video game image, the screen may not be clear. Any programme that contains a Copy-Never copy guard signal cannot be recorded. When Bilingual Recording is set to A/L or B/R in step 3, you cannot select the sound when playing in the following cases. When recording in PCM mode. When recording to the HDD (HDD Recording Format is set to Video Mode On in the Recording setup (page 144))/DVD+RW/ DVD+R/DVD-RW/DVD-R (Video mode). You cannot select L1 in step 2 if LINE 1 In is set to Decoder in the Video In/Out setup (page 137).
b Note
When VPS / PDC is set for one or more timer recordings, the start times may change in the event of a broadcast delay or early start.
78
79
3
Playback
To resume playback from the point where you stopped (Resume Play)
When you press H again after you stop playback, the recorder resumes playback from the point where you pressed x. To start from the beginning, press x again, and press H. Playback starts from the beginning of the title/track/scene. The point where you stopped playing is cleared when: you open the disc tray (except HDD). you play another title (except HDD). you switch the Title List to Original or Playlist (DVD-RWs/DVD-Rs in VR mode only). you edit the title after stopping playback. you change the settings on the recorder. you make a recording (except HDD/DVDRWs/DVD-Rs in VR mode). you disconnect the mains lead.
DVD
DATA CD *
* DivX video file only
b Note
DVD
b Note
When using the HDMI connection, there may be a delay, before the playback picture appears on the TV screen, and the beginning portion of the playback picture may not be displayed.
>
H/X/x
b Note
Some playback options such as search, repeat play or programme play cannot be played with PBC function. To play with playback options, start playback without PBC functions using the Title List.
b Notes
You cannot resume playback during TV Pause. Resume Play is not available for Super VIDEO CDs.
PLAY MODE
To stop playback
Press x.
80
,continued
81
1-19
Playback options
To check the position of the buttons below, see the illustration on page 80.
Buttons AUDIO
HDD -RWVR DVD DATA CD *
* DivX video file only
-RVR
Operations Plays in slow motion when pressed for more than one second in pause mode. Plays one frame at a time when pressed briefly in pause mode. To resume normal playback, press H.
Operations Selects one of the audio tracks recorded on the disc when pressed repeatedly in normal playback mode. DVD DATA DVD * DATA CD * : Selects the language.
HDD -RWVR
-RVR : Selects the main or sub sound.
DVD
*1*2
VCD
*1*2
DATA DVD DATA CD *1 Playback direction only *2 DivX video file only
X (pause)
SUBTITLE
DVD DATA DVD * DATA CD *
* DivX video file only
b Notes
Each time you press , replays the scene for the following duration. 5 seconds t 15 seconds t 30 seconds t 1 minute t 2 minutes t 3 minutes t 5 minutes t 10 minutes t 20 minutes t advances the time in 10-minute increments t 2 hours Each time you press , briefly fast forwards the current scene for the following duration. 30 seconds t 1 minute t 1 minute 30 seconds t 2 minutes t 3 minutes t 5 minutes t 10 minutes t 20 minutes t advances the time in 10-minute increments t 2 hours
Angles and subtitles cannot be changed with titles recorded on this recorder. JPEG image files made with a DVD camcorder can only be played as a slideshow. For video files containing JPEG image files and movies, the recorder can play movie parts only.
Playback
Goes to the beginning of the previous/next title/chapter/scene/track when pressed during playback. Goes to the beginning of the first title/track when pressed in stop mode. Fast reverses/fast forwards the disc when pressed during playback. Search speed changes as follows: fast reverse fast forward mFR1*1 T t MFF1*2 mFR2 T T t t MFF2 *3 T T T t t t MFF3*3 mFR3 mFR4*3 T T T T t t t t MFF4*3 When you press and hold the button, fast forward/fast reverse continues at the selected speed until you release the button.
When you press m once during playback, you can play Reverse play (not available for VIDEO CDs/Super VIDEO CDs/DivX video files). When you press M once during playback, you can play quickly with sound (not available for VIDEO CDs/Super VIDEO CDs). *3 Not available for VIDEO CDs/Super VIDEO CDs.
*1 *2
82
,continued
83
1 2
1 2 3
You can play the contents of the HDD or a disc in the order you want by arranging the order of the titles/chapters/albums/tracks on the HDD or disc to create your own programme. You can make a programme of up to 24 steps.
1 2 3
3 4
Select Programme, and press ENTER. Select Input/Edit Programme, and press ENTER.
The Input/Edit Programme display differs depending upon the disc type. Example: DVD
While monitoring the sound, press ENTER at the starting point (point A) of the portion to be played repeatedly.
Set point B is selected.
Playback
Continue playing to locate the ending point (point B), and press ENTER.
A-B Repeat starts.
DVD
DivX video file only *2 Available only when playing without PBC functions
DATA CD *
* DivX video file only
Press ENTER.
Repeat play starts.
4 5
You can adjust the picture quality from connected equipment, such as a TV or projector by selecting a preset setting. You can also adjust the picture quality by changing detailed settings, and store up to three settings in the memory.
Select a title or album (example: Title 001) using M/m, and press ENTER. Select a chapter or track (example: Chapter 01) using M/m, and press ENTER.
The chapter or track is programmed. If you make a mistake, select the step number (example: 01.) using </M/m, and press CLEAR.
1 2 3
b Note
When playing an HDD/DVD VIDEO/DVD-RW (Video mode)/DVD-R (Video mode), set the start and stop points within the same title.
b Note
You cannot select Repeat Programme when no programme remains.
Select Picture Adjustment, and press ENTER. Select a preset setting using </,, and press ENTER.
Dynamic: produces a bold dynamic picture by increasing the picture contrast and the colour intensity. Standard: displays a standard picture.
Professional: displays an original picture.
6 7
To programme other chapters or tracks, press </M/m/, to select a step number, and repeat steps 4 and 5. Press H.
Programme play starts.
Memory1/Memory2/Memory3: Your own settings. To create your own settings, see To create your own setting below.
,continued
84
85
1-20
To check the detailed settings for the selected preset, press DISPLAY.
4
1 2
Select an item using M/m, and adjust settings using </,. For details about each setting, see the explanation of the display. Prog. Motion: Adjusts the progressive video signal when Component Video Out is set to Progressive (page 136). Select Motion for a picture, including subjects that move dynamically. Select Still for a picture with little movement. Cinema: Converts the progressive video signal to match the type of DVD software that you are watching when Component Video Out is set to Progressive (page 136). Select Auto1 to automatically detect the software type (Film-based or Videobased) and select the appropriate conversion mode. Normally select this position. If the picture appears unnatural, select Auto2, On, or Off. YNR (luminance noise reduction): Reduces noise contained in the luminance element of the video signal. BNR (block noise reduction): Reduces block noise or mosaic-like patterns in the picture.
MNR (mosquito noise reduction): Reduces the faint noise appearing around the outlines of the images. The noise reduction effects are automatically adjusted within each setting range according to the video bit rate and other factors. Sharpness: Sharpens the outlines of the images. Detail: Adjusts the sharpness of images outlines. White Enhancer: Adjusts the intensity of white. Black Enhancer: Adjusts the intensity of black. Black Level: Selects the black level (setup level) for the video signals. Select ON to raise the standard black level. Select this when the picture appears too dark. Select OFF to set the black level of the input signals to the standard level. Normally, select this position. Gamma Correction: Adjusts how dark areas look. Hue: Adjusts the colour balance. Chroma Level: Makes the colours deeper or lighter.
You can pause a current TV broadcast, and record it on the HDD, then continue watching the programme at a later time. This is useful when you receive an unexpected phone call or visitor while watching TV. When connecting the recorder to your TV using the SCART jack, do the followings. set SMARTLINK to This Recorder Only in the Options setup (page 150). set TV Pause to TVs Tuner in the Options 2 setup (page 150). preset programme positions by downloading from your TV using Download from TV of Auto Channel Setting in the Analog Tuner setup (page 133). If you do not make the SCART connection, set TV Pause to Recorders Tuner in the Options 2 setup (page 150).
b Notes
The picture does not pause and the recorder starts only recording in the following cases. when the programme positions are preset differently between the recorder and the connected TV. when watching the programme from the external equipment connected to your TV. The picture tuned by the recorder pauses when TV Pause is set to Recorders Tuner in the Options 2 setup (page 150). You may not be able to use the TV Pause function depending on some TVs. For details, refer to the operating instructions supplied with your TV. The TV Pause function will not work correctly when watching TV via the connected component such as a VCR or digital tuner. The TV Pause function works only with the channel selected on the TV. You cannot use the TV Pause function as a recording feature from the component (VCR, etc.) connected to the LINE 1/DECODER jack. The TV Pause function will not work if the connected TV does not comply with SMARTLINK. To check whether your TV complies with SMARTLINK, refer to the operating instructions supplied with your TV.
Playback
Press SYSTEM MENU to exit. The setting is automatically stored as the setting you selected in step 1.
b Notes
If the outlines of the images on your screen become blurred, set BNR and/or MNR to Off. Depending on the disc or the scene being played, the above BNR or MNR effects may be hard to discern. Also, these functions may not work with some screen sizes. The following settings are not available for the signals output from the HDMI jack. Sharpness White Enhancer Black Enhancer Black Level Gamma Correction Hue Chroma Level
M H/X/x
86
87
Playing from the Beginning of the Programme You Are Recording (Chase Play)
HDD
Playing a Previous Recording While Making Another (Simultaneous Rec and Play)
HDD
-RVR +RW -RVideo -RWVR -RWVideo +R
1 2 3
While recording, press DVD and insert the DVD into the recorder. Press TITLE LIST to display the DVD Title List. Select the title you want to play, and press ENTER. Playback starts from the selected title.
DVD
VCD
+R DATA DVD *
DATA CD *
* DivX video file only
Chase Play allows you to view the recorded part of a programme on the HDD while the recording is being made. You do not need to wait until the recording finishes.
DVD
DATA CD
b Note
You cannot play a DVD, DivX video or VIDEO CD recorded in the NTSC colour system while recording on the HDD in the PAL/SECAM colour system.
Simultaneous Rec and Play allows you to view a previously recorded programme while recording programmes. Playback continues even if a timer recording starts. Use this function as follows: While recording to the HDD: Play another title on the HDD. Play a previously recorded programme on a DVD by pressing the DVD button. While recording to a DVD: Play a previously recorded programme on the HDD by pressing the HDD button. You can also play a DVD VIDEO, VIDEO CD, Super VIDEO CD, DATA DVD, or DATA CD while recording on the HDD.
You can search a disc by title, chapter, scene or track. As titles and tracks are assigned individual numbers, select the title or track by entering its number. You can also search for a scene using the time code.
Number buttons
Playback
</M/m/,, ENTER
HDD
DVD
PLAY MODE
1
TITLE LIST M/m, ENTER
2 3
Select Search Mode, and press ENTER. Select a search method, and press ENTER.
Time Search (for HDD/DVDs/DATA DVDs*1/DATA CDs*1/VIDEO CDs*2): Searches for a starting point by entering the time code. Title Search (for HDD/DVDs/DATA DVDs*1/DATA CDs*1) Chapter Search (for HDD/DVDs) Track Search (for VIDEO CDs*3)
*1 *2 *3
Example: Play another title on the HDD while recording to the HDD.
1 2
While recording, press TITLE LIST to display the HDD Title List. Select the title you want to play, and press ENTER. Playback starts from the selected title.
DivX video file only Except Super VIDEO CDs Available only when playing without PBC functions
,continued
88
89
1-21
The display for entering the number appears. Example: Chapter Search
Before Editing
This recorder offers various edit options for various disc types.
b Notes
Press the number buttons to select the number of the title, chapter, time code, etc., you want.
For example: Time Search To find a scene at 2 hours, 10 minutes, and 20 seconds, enter 21020. If you make a mistake, select another number.
Press ENTER.
The recorder starts playback from the selected number.
You may lose the edited contents if you remove the disc or a timer recording starts while editing. DVD discs created by DVD camcorders cannot be edited on this recorder. If a message appears and indicates that the discs control information is full, erase or edit unnecessary titles. The remaining disc space displayed on the screen may differ from the actual remaining disc space. When editing a DVD+R or DVD-R, finish all editing before finalising the disc. You cannot edit a finalised disc.
HDD
-RWVR -RVR
Edit features
Original title Yes Yes Yes Yes No No Yes No No No No No Yes Yes Yes No Yes
Playlist title Yes Yes Yes Yes Yes No No Yes Yes No No Yes Yes Yes Yes Yes Yes
Title edit
Erase (page 92) Title Name (page 92) Set Thumbnail (page 92) A-B Erase (page 93) Divide (page 94) Set Genre (page 92) Protect (page 92) Move (page 97) Combine (page 97) Genre Name (page 92) Editing multiple titles (Multi-Mode) (page 93) Creating a Playlist (page 96) Undo (page 92)
Yes Yes Yes Yes Yes Yes Yes No No Yes Yes No No Yes Yes No Yes
Chapter edit
Divide (page 95) Erase (page 96) Move (page 97) Combine (page 96)
90
,continued
91
This section explains the basic edit functions. Note that editing is irreversible. To edit DVD-RWs/DVD-Rs (VR mode) without changing the original recordings, create a Playlist title (page 96). To open up disc space on the HDD or a DVDRW (VR mode), you can erase any title. See Erasing and Editing a Title on page 92. For DVD-Rs and DVD+Rs, the available disc space does not increase even if you erase titles.
A-B Erase: Erases a section of the title (page 93). Divide: Divides a title into two titles (page 94). Chapter Edit: Edits chapters in a title (page 95). Set Genre: Assigns a genre to a title. Protect: Protects the title. appears next to the protected title. Move: Changes the titles playing order (page 97). Combine: Combines two titles into one (page 97). Genre Name: Allows you to enter a genre name (up to 12 characters) (page 42). Multi-Mode: Allows you to select and edit multiple titles at one time (page 93). Create: Creates a Playlist (page 96). Undo: Undoes the last edit you made.
z Hint You can label or re-label DVDs (page 43).
4 5 6 7
Repeat step 4 to select all of the titles you want to edit. When you finish selecting titles, press ,.
The sub-menu appears.
To switch between the Playlist and Original Title List (DVD-RW/DVD-R in VR mode only)
You can display the Playlist titles in the Title List (Playlist), or the Original titles in the Title List (Original).
z Hint You can exit Multi-Mode by pressing , and selecting Single-Mode while selecting titles.
EXIT/ O RETURN . m X
1 2 3
Press < while the Title List is displayed. Select Original using M/m, and press ENTER. Select Original or Play List using M/ m, and press ENTER.
You can select a section (scene) in a title and erase it. Note that erasing scenes in a title cannot be undone.
1 2 3
1 2 3
1 2
After step 2 of Erasing and Editing a Title, select Edit, and press ENTER. Select A-B Erase, and press ENTER.
For the HDD, select a type of editing, and press ENTER. For details, see page 92. The display for setting point A appears. The title starts to play.
92
,continued
93
1-22
3 4 5 6 7
Select point B using m/M, and press X. Select To, and press ENTER.
The position of point B is displayed.
If you want to dub a long title to a disc but do not want to reduce the picture quality, divide the title into two shorter titles. Note that dividing a title cannot be undone.
* Only playlist titles can be divided for DVD-RWs/ DVD-Rs in VR mode.
1 2
You can edit individual chapters within a title. To edit DVD-RWs/DVD-Rs (VR mode) without changing the original recordings, create a Playlist (page 96).
After step 2 of Erasing and Editing a Title, select Edit, and press ENTER. Select Divide, and press ENTER.
For the HDD, select a type of editing, and press ENTER. For details, see page 92. The display for setting the dividing point appears. The title starts to play.
1
TITLE LIST </M/m/,, ENTER
b Notes
Images or sound may be momentarily interrupted at the point where you erase a section of a title. Sections shorter than five seconds may not be erased.
. m X
2 3 4 5
Select the dividing point using m/ M, and press X.
To return to the beginning of the title, press X and then press ..
1 2 3 4
3 4
Press ENTER.
The display asks for confirmation.
Select a title containing the chapter you want to edit, and press ,.
The sub-menu appears.
Press ENTER.
The chapter is divided into two.
Select Edit, and press ENTER. Select Chapter Edit, and press ENTER.
For the HDD, select a type of editing, and press ENTER. For details, see page 92.
94
,continued
95
1 2 3 4
Playlist edit allows you to edit or re-edit without changing the actual recordings. You can create up to 99 Playlist titles.
Select Edit, and press ENTER. Select Move, and press ENTER.
1 2 3 4
b Note
Playlist titles containing titles recorded with the Copy-Once copy protection signal cannot be dubbed or moved (page 99).
Select a Playlist title containing the chapter you want to edit, and press ,.
The sub-menu appears.
2 3 4
Select a chapter using </,, and press ENTER. Select Erase, and press ENTER.
The display asks for confirmation.
Select Edit, and press ENTER. Select Chapter Edit, and press ENTER. Select Erase/Move.
Erasing and Editing
5
</M/m/,, ENTER
Select a new location for the title using M/m, and press ENTER.
The title moves to the new location. To move more titles, repeat from step 2.
1 1 2 3
Press TITLE LIST.
Switch to the Playlist (page 92).
2 3 4
6 7 8
Select a chapter using </,, and press ENTER. Select Move, and press ENTER. Select a new location for the chapter using </,, and press ENTER.
The chapter moves to the new location.
Press ,.
The sub-menu appears.
Select Edit, and press ENTER. Select Combine, and press ENTER.
4 5
Repeat steps 3 and 4 to select all of the titles you want to add to the Playlist.
5 6
Select a title you want to combine. Select Yes, and press ENTER.
The titles are combined.
96
97
1-23
Before Dubbing
HDD
-RVR +RW -RVideo -RWVR -RWVideo +R
HDD
Copy-Once
HDD
, -RW
b Notes
If you want to record from a digital video camera connected to the DV IN jack, see DV Camcorder Dubbing on page 104. To record from equipment connected to the LINE IN jacks, see Recording from Connected Equipment on page 79.
You cannot make a recording while dubbing. Before playing a dubbed disc on other DVD equipment, finalise the disc (page 45, 100). You cannot dub from DVD VIDEOs or finalised DVD-RWs/DVD-Rs (Video mode) to the HDD. Titles containing mixed aspect ratios cannot be dubbed to a DVD+RW/DVD+R/DVD-RW/ DVD-R (Video mode) using the HDD/DVD DUB button. Titles over 8 hours cannot be dubbed to singlelayer DVD+RWs/DVD+Rs. Low resolution (SEP through LP modes) 16:9 size titles cannot be dubbed to a DVD+RW/ DVD+R/DVD-RW/DVD-R (Video mode). When dubbing to a DVD+R DL, DVD-R DL (Video mode) in Real-Time Dubbing mode, the dubbing contents are divided into titles.
* CPRM-compatible DVD-RWs/DVD-Rs (VR mode) only. CPRM (Content Protection for Recordable Media) is a coding technology that protects copyrights for images.
b Notes
Protected titles in the HDD cannot be moved. The Move function is not available for HDD/ DVD DUB dubbing. Even if you erase a scene that contains a copy protection signal, the recording restrictions on that title are retained.
98
D Total size of the selected titles and available space on the disc to be dubbed (approximate) E Selected titles thumbnail picture
You can select the titles you want to dub using Dubbing List. You can also edit titles before dubbing without changing the original titles.
To cancel dubbing
Press and hold HDD/DVD DUB for more than one second. When dubbing (Move) is stopped partway, no part of the title will be moved to the dubbing target. However, note that this will decrease the free space for DVD+Rs/DVDRs.
1 2 3
6 7
Repeat step 5 to select all of the titles in the order you want to dub. Select Next using ,, and press ENTER.
The Title Edit display appears. For details about editing, see To edit titles on the Dubbing List on page 102.
Select Dubbing, and press ENTER. Select a dubbing direction, and press ENTER.
To dub titles from the HDD to a disc, select HDD -> DVD. To dub titles from a disc to the HDD, select DVD/CD -> HDD.
100
1-24
In this section, dubbing refers to copying a recorded title on the internal hard disk drive (HDD) to another disc, or vice versa. You can dub a playing title using the HDD/DVD DUB button (see HDD/DVD Dubbing on page 99) or you can select to dub multiple titles all at once (see Dubbing Using Dubbing List on page 100). You can also dub an entire DVD disc to make a backup copy (see Making a Backup Disc (DVD Backup) on page 103). Before you start, read the following precautions, which are common to all dubbing methods.
The chapter marks in the dubbing source are dubbed. The position of chapter marks may be slightly changed from the original. However, the chapter marks in the dubbing source are not retained in the dubbed title when dubbing to a DVD-RW/DVD-R (Video mode), DVD+RW, or DVD+R at normal speed. The chapter marks are automatically inserted according to the Auto Chapter (Video) and Auto Chapter (DVD+R/+RW) settings in the Recording setup (page 143). The Set Thumbnail setting in the dubbing source is dubbed as a thumbnail picture marker (except when dubbing from a DVD+RW/DVD-RW (Video mode)/ DVD+R/DVD-R (Video mode)). The position of thumbnail picture markers may be slightly changed from the original.
Dubbing restriction
You cannot dub movies and other DVD VIDEOs to the HDD. Also, when dubbing from a DVD to the HDD, scenes that contain a copy protection signal cannot be recorded. Titles containing Copy-Once copy protection signals can be moved only from the HDD to a DVD-RW/DVD-R (VR mode)* (after the title is moved, the original title in the HDD is erased). The Move function is performed using Dubbing List. Titles containing Copy-Once copy protection signals are indicated with .
Copy protection signals Copy-Free (No copy protection signal) Dubbing
HDD/DVD Dubbing
HDD
-RVR +RW -RVideo -RWVR -RWVideo +R
You can dub a single title by pressing the HDD/DVD DUB button during playback.
1 2
+RW , -RW
-RWVR +R -RVideo
Video
-RVR
VR
-RVR
* *
To convert the recording mode (only when dubbing from a disc to the HDD)
After step 1, press REC MODE to select the recording mode.
b Note
You cannot use the HDD/DVD DUB button in the following cases. Dub the title using Dubbing List (page 100). When dubbing the title recorded in MN6 mode or longer duration mode to a DVD+RW/DVD+R. When dubbing the title recorded in HQ+ mode to a DVD.
99
Required times for High-speed Dubbing from HDD to DVD (for 60-minute programme)*1
Speed*2 6x 2.4x 2x DVD-R (Dual Layer) Approx. 30 min. Approx. 20 min. Approx. 15 min. Approx. 12 min. Approx. 10 min. Approx. 7 min. 30 sec. Dubbing (HDD y DVD) Approx. 5 min. Approx. 3 min. 45 sec. Approx. 3 min.*3
Rec. mode
High-speed DVD+RW/ DVD+R DVD-RW/ (Double Layer) DVD+R/ DVD-R Approx. 10 min. Approx. 6 min. 40 sec. Approx. 5 min. Approx. 4 min. Approx. 3 min. 20 sec. Approx. 2 min. 30 sec. Approx. 1 min. 40 sec.*3 Approx. 1 min. 15 sec.*3 Approx. 1 min.*3 Approx. 25 min. Approx. 16 min. 40 sec. Approx. 12 min. 30 sec. Approx. 10 min. Approx. 8 min. 20 sec. Approx. 6 min. 15 sec. Approx. 60 min.*3 Approx. 60 min.*3 Approx. 60 min.*3
HQ HSP
SP
LSP ESP
LP
EP
SLP
SEP
*1
The values in the above table are for reference only. Actual times for dubbing also require time for creating discs control information and other data. *2 This is the maximum recording speed of this recorder. The recording speed cannot exceed the value indicated in the above table even when using discs that support higher recording speeds. In addition, depending on the disc condition, the recorder may be unable to record at the maximum recording speed indicated in the table. *3 High-speed dubbing is not available when dubbing titles recorded in SEP, SLP, or EP mode to DVD+RWs and DVD+Rs.
,continued
101
b Notes
The Dubbing List you created remains after dubbing. To edit the existing Dubbing List, select Use Previous Dubbing List in step 4. The Dubbing List is cleared when: you change Input Line System setting in the Basic setup (page 130). you reset the recorder (page 158). you open the disc tray (except when dubbing from the HDD). you edit the titles on a disc (except when dubbing from the HDD). you switch the Title List to Original or Playlist (when dubbing from DVD-RWs/DVD-Rs in VR mode only). you finalise the disc. The seams that are left over from editing may remain on the disc after dubbing to DVD+RWs/ DVD-RWs (Video mode)/DVD+Rs/DVD-Rs (Video mode). Finalisation is cancelled if a timer recording starts, even if you set Finalise to Yes in step 9.
Follow steps 1 to 7 of Dubbing Using Dubbing List on page 100. The Title Edit display appears.
You can dub all of the contents on a finalised DVD+RW/DVD+R or finalised DVD-RW/ DVD-R (Video mode) to another recordable DVD+RW/DVD-RW or unused DVD+R/ DVD-R via the HDD as a backup copy.
b Note
Backup discs of unfinalised discs cannot be made.
2 3
Select a title you want to edit, and press ENTER. The sub-menu appears. Select an option, and press ENTER. The options differ depending on the dubbing direction or disc type. Erase: Erases the selected title. Title Name: Names or renames a title (page 42). A-B Erase: Erases the section of the title (page 93). Move: Changes the order of titles (page 97). Preview: Allows you to check the content of a title. Divide: Divides a title into two titles (page 94). Combine: Combines two titles (page 97). Chapter Edit: Edits chapters (page 95). Set Thumbnail: Changes the titles thumbnail frame that appears in the Title List (page 39). Recording Mode: Sets the picture quality of the dubbing. Bilingual: Sets how a bilingual audio programme is dubbed. Cancel: Exits the sub-menu. Repeat steps 2 and 3 to edit all of the titles. Go to step 8 of Dubbing Using Dubbing List on page 100 to dub edited titles.
1 2 3 4
Select Dubbing, and press ENTER. Select DVD Backup, and press ENTER. Select Start new DVD Backup, and press ENTER.
If you have previously dubbed backup data to the HDD, select Resume writing data, and go to step 7.
1 2
Select Erase back-up data in step 4, and press ENTER. The display asks for confirmation. Select Yes, and press ENTER.
Dubbing (HDD y DVD)
b Notes
When dubbing to a DVD+R/DVD-R is stopped partway in step 8, you cannot play or record on the disc. You cannot make a backup disc of DVD+R DLs/ DVD-R DLs. You may not use the DVD Backup function depending on the recording quality or physical condition of the disc, or characteristics of the recording device and authoring software.
5 6 7
Insert the DVD you are going to make a backup of. Select Start, and press ENTER.
The recorder starts dubbing all of the contents on a DVD to the HDD.
Press Z (open/close), and replace the DVD with a recordable DVD+RW/DVDRW or an unused DVD+R/DVD-R.
To make a backup disc of DVD+RWs/ DVD+Rs, insert a recordable DVD+RW or unused DVD+R. To make a backup disc of DVD-RWs/ DVD-Rs, insert a recordable DVD-RW or unused DVD-R.
4 5
8 9
102
103
DV Camcorder Dubbing
z Hint If you plan to do additional editing on a disc after the initial dub, use the DV IN jack and record on a DVD-RW/DVD-R (VR mode) or HDD.
1 2
b Notes
You cannot connect more than one piece of digital video equipment to the recorder. You cannot control the recorder using another device or another recorder of the same model. You cannot record date, time, or the contents of the cassette memory onto the disc. If you record from a DV/Digital8 format tape that is recorded in multiple sound tracks, such as a tape with multiple sampling frequencies (48 kHz, 44.1 kHz, or 32 kHz), no sound or an unnatural sound will be output when playing back the sampling frequency switch point on the disc. In order to use this recorders Auto Chapter setting (page 104), be sure to correctly set the clock on your digital video camera before shooting. The recorded picture may be momentarily affected or the start and end points of a title may be different from what you have set if the source DV/Digital8 format tape is in any of the following conditions. In this case, see Recording from Connected Equipment (page 79). There is a blank space in the recorded portion of the tape. The tapes time code is not sequential. If the picture size or the recording mode on the tape being dubbed changes. A blank or black coloured screen will be dubbed when the recorder is set to a different colour system from the DV tape contents system. Set Input Line System in the Basic setup to the same colour system as the DV tape contents system (page 130).
b Notes
You cannot make a recording while DV camcorder dubbing. The DV IN jack is for input only. It will not output signals. You cannot use the DV IN jack when: signal input to the DV IN jack on the front panel or recorder operation cannot be performed correctly when using a digital video camera (see About i.LINK on page 163). Connect the camera to the LINE IN jack and follow the instructions of Recording from Connected Equipment on page 79. the input signal is not in DVC-SD format. Do not connect a MICRO MV format digital video camera even if it has an i.LINK jack. the images on the tape contain copy protection signals, which limit recording. If you want to play DVDs dubbed from a DV camcorder on other DVD equipment, finalise the disc (page 45). Set the recorder and DV camcorder to the same colour system (page 130).
Insert the source DV/Digital8 format tape into your digital video camera.
For the recorder to record or edit, your digital video camera must be set to video playback mode.
Press REC MODE on the remote repeatedly to select the recording mode.
The recording mode changes as follows:
For details about the recording mode, see page 71. Note that you cannot select manual recording mode.
4 5
Set the External Audio setting in the Audio In setup (page 138). Set the DV Input setting in the Audio In setup (page 138).
You are ready to start dubbing. Select one of the dubbing methods on the following pages.
Hookups
DVD recorder
DV Camcorder Dubbing
You can check the contents of DV/Digital8 format tape before dubbing. For details, see Playing from a DV Camcorder on page 107.
z Hint The recorder completes dubbing even after being turned off.
DV output
104
105
1-25
z Hint You can turn off the dubbing menu by pressing the DISPLAY button during dubbing. Press the DISPLAY button again to display the dubbing menu.
b Note
You cannot set a scene to be shorter than one second.
You can record the entire contents of a DV/ Digital8 format tape onto a disc with a single press of the ONE-TOUCH DUB button on the recorder. The recorder controls the digital video camera for the whole process, and completes the recording.
You can select and dub scenes while playing a DV/Digital8 format tape.
Select DV, and press ENTER. Select Playback, and press ENTER. Start playback on the DV camcorder.
Images from the DV camcorder appear on your TV screen.
1 2 3 4 5 6
Follow steps 1 to 5 of Preparing for DV camcorder dubbing on page 104. Press SYSTEM MENU.
The System Menu appears.
Follow steps 1 to 5 of Preparing for DV camcorder dubbing on page 104, and press ONE-TOUCH DUB on the recorder.
The recorder rewinds the tape and then starts recording the tape contents. After the recording is finished, the recorder rewinds the tape in the digital video camera, and finalises the recorded disc (except DVDRW/DVD-R (VR mode)) automatically.
Select DV, and press ENTER. Select Manual Dubbing, and press ENTER. Select the recording destination, Record to Hard Disk Drive or Record to DVD, and press ENTER. Press H.
The scene starts to play.
To cancel playback
Press SYSTEM MENU.
z Hint You can dub the playing tape contents. During playback, press HDD or DVD to select the dubbing destination, and press z REC. To stop dubbing, press x REC STOP.
7 8 9
Find the point on the DV/Digital8 format tape that you want to start dubbing from using m/M or c/ C, and press X. Select Start Rec., and press ENTER.
The recorder starts dubbing.
DV Camcorder Dubbing
b Notes
When a blank space between the recordings on the tape continues for more than two minutes, DV One Touch Dubbing ends automatically. The recorder will pause recording when there is a blank space or an image containing copy protection signals on the tape. The recorder will resume recording automatically when receiving a recordable signal. Finalisation is cancelled if a timer recording starts (except for DVD-RW/DVD-R (VR mode)). DV One Touch Dubbing ends automatically when there are images containing copy protection signals at the beginning of the tape.
106
107
b Note
A-B Repeat is not available for MP3 audio tracks.
You can play repeatedly all the tracks or a single track on an album or disc.
You can play audio tracks on CDs, DATA DVDs (DVD-ROMs/DVD+RWs/DVD+Rs/ DVD-RWs/DVD-Rs/DVD-RAMs), or DATA CDs (CD-ROMs/CD-Rs/CD-RWs).
1 2 3
Playback options
CD
AUDIO
CLEAR
Buttons AUDIO
Operations Selects stereo or monaural audio tracks recorded on the disc when pressed repeatedly in normal playback mode. Goes to the next or previous track when pressed during playback. For MP3 discs, goes to the next or previous album when pressed repeatedly. Fast reverses/fast forwards the disc when pressed during playback. Search speed changes as follows: fast reverse fast forward mFR1 T t MFF1 mFR2 T T t t MFF2 When you press and hold the button, fast forward/fast reverse continues at the selected speed until you release the button. To resume normal playback, press H. Pauses playback. To resume normal playback, press H.
1 2
Press ENTER.
Repeat play starts.
Audio Tracks
1 2
Insert a disc.
See 1. Inserting a Disc on page 36.
Press H.
Playback starts.
3 4
While monitoring the sound, press ENTER at the starting point (point A) of the portion to be played repeatedly.
Set point B is selected.
b Note
You can select Repeat Programme only during Programme play.
To stop playback
Press x (stop).
z Hint You can play audio tracks using the Title List. Press TITLE LIST. Then select a track, and press ENTER.
Continue playing to locate the ending point (point B), and press ENTER.
A-B Repeat starts.
X (pause)
b Note
When any video titles are recorded on a DATA DVD, the MP3 audio tracks on that DATA DVD cannot be played.
108
109
1-26
Press the number buttons to select the number of the album or track you want.
If you make a mistake, select another number.
You can play the contents of an album or disc in the order you want by arranging the order of the albums/tracks on a disc to create your own programme. You can make a programme of up to 24 steps.
Press ENTER.
The recorder starts playback from the selected number.
You can search a disc by album or track. As albums and tracks are assigned individual numbers, select the album or track by entering its number.
1 2 3
Select Programme, and press ENTER. Select Input/Edit Programme, and press ENTER.
The Input/Edit Programme display differs depending upon the disc type. Example: DATA DVD
Number buttons
</M/m/,, ENTER
PLAY MODE
4 5
Select an album (example: 01.BRAHMS) using M/m, and press ,. Select a track (example: 001.SYMPHONY01) using M/m, and press ENTER.
The track is programmed. If you make a mistake, select the step number (example: 01-001) using </M/ m, and press CLEAR.
1 2 3
Audio Tracks
Select Search Mode, and press ENTER. Select a search method, and press ENTER.
Album Search (except for CD) Track Search The display for entering the number appears. Example: Album Search
6 7
To programme other tracks, press </ M/m/, to select a step number, and repeat steps 4 and 5. Press H.
Programme play starts.
110
111
About Jukebox
There are two methods to use Jukebox: connecting the USB device or copying audio tracks to the HDD. When using Jukebox, you can do followings: Store audio tracks on the HDD. Play audio tracks using various play modes. Label tracks or albums. Assign albums a genre. Change the track order. Notes on copying
You cannot copy audio tracks on the HDD to discs or USB devices. Some audio tracks may not be copied depending on the file size. You cannot copy audio tracks if the HDD is full or almost full. An album name and MP3 audio track name are also copied. However, there may be some names that cannot be copied. When copying is stopped partway, tracks finished copying before you stop will remain copied onto the HDD as an album. See the Album List to check which albums have been copied (page 114). When copying audio tracks from a CD, the album name is labelled as F_*** and the audio track names are labelled as T_*** automatically. During copying, other operations cannot be performed. While copying, timer recordings are unavailable. If the timer is set during copying, the recorder starts the timer recording after copying is finished. Copy-protected CDs cannot be copied to the HDD.
7 8
1 2 3
Insert a disc that you are going to copy to the HDD. Press H to start playback. Press HDD/DVD DUB.
For CDs, all the tracks on the disc are copied to the HDD. For DATA CDs/ DATA DVDs, the current album is copied to the HDD.
To cancel copying
Press ENTER.
To cancel copying
SYSTEM MENU </M/m/,, ENTER
Press ENTER.
z Hint You can copy all the contents on the disc by selecting DVD/CD -> HDD in Dubbing in the System Menu.
H HDD/DVD DUB
1 2 3 4 5 6
Connect the USB device to the USB jack on the recorder (page 112). Press SYSTEM MENU.
The System Menu appears.
Audio Tracks
Select Music Jukebox, and press ENTER. Select Listen to Music from USB Device, and press ENTER.
The Album List appears.
to USB jack
Select an album, and press ,. Select Edit using M/m, and press ENTER.
The sub-menu appears.
USB device
112
113
1-27
1 2 3 4
Select a track you want to skip. Press , while the Album List is displayed. Select Edit using M/m, and press ENTER. Select Set Skip using M/m, and press ENTER. appears next to the selected track. To cancel, select Set Skip, and press ENTER again.
To stop playback
Press x (stop).
1 2 3 4
Press , during playback. Select Play Mode, using M/m, and press ENTER.
The Play Mode menu appears.
CLEAR
Playback options
Buttons ./> (previous/ next) m/M (fast reverse/fast forward) Operations Goes to the next or previous track when pressed during playback. Fast reverses/fast forwards the disc when pressed during playback. Search speed changes as follows: fast reverse fast forward mT tM mTT ttM When you press and hold the button, fast forward/fast reverse continues at the selected speed until you release the button. To resume normal playback, press H. Pauses playback. To resume normal playback, press H.
1 2 3
Press < while the Album List is displayed. Select Sort Titles using M/m, and press ENTER. Select the item using M/m, and press ENTER.
Order Sorted In order of album number. In order of playback times. The album that is most often played is listed at the top. In alphabetical order. By number By favourite
Press ENTER.
Repeat play starts.
1 2 3
b Notes
You can select Repeat Programme only during Programme play. A-B Repeat is not available when using Music Jukebox.
Select Music Jukebox, and press ENTER. Select Listen to Music / Edit or Listen to Music from USB Device, and press ENTER.
To listen to the audio tracks on the HDD, select Listen to Music / Edit. To listen to the MP3 audio tracks from the connected USB device, select Listen to Music from USB Device. The Album List appears.
Audio Tracks
By album
X (pause)
1 2 3
Press < while the Album List is displayed. Select Genre using M/m, and press ENTER. Select the genre using M/m, and press ENTER. The albums in the selected genre appear. To display all albums, select All Genres.
114
,continued
115
1 2 3 4
Press , while the Album List is displayed. Select Play Mode, using M/m, and press ENTER.
The Play Mode menu appears.
Select Programme, and press ENTER. Select Input/Edit Programme, and press ENTER.
b Note
You cannot edit audio tracks on the connected USB device.
1 2 3 5 6
Select an album (example: Album 001) using M/m, and press ,. Select a track (example: Track 001) using M/m, and press ENTER.
The track is programmed. If you make a mistake, select the step number (example: 01.) using </M/m, and press CLEAR.
Select Music Jukebox, and press ENTER. Select Listen to Music / Edit, and press ENTER.
Audio Tracks
7 8
To programme other tracks, press </ M/m/, to select a step number, and repeat steps 5 and 6. Press H.
Programme play starts.
116
117
1-28
You can connect a USB device (digital still camera, Memory card reader, and USB memory) to the USB jack on the recorder to view JPEG image files or copy to the HDD. Refer to the operating instructions supplied with the USB device before connecting.
DVD recorder
Copying all JPEG image files from the connected USB device (USB t DVD-RW/DVD-R)
1 2 3
Connect the USB device to the USB jack on the recorder. Insert a blank DVD-RW/DVD-R (Video mode). Press SYSTEM MENU.
The System Menu appears.
to USB jack
4 5
Select an album or JPEG image file using M/m, and press ,.
The sub-menu appears.
5 6
USB output
z Hint See 8. Reformatting a Disc (page 47) to format DVD-RWs/DVD-Rs in Video mode.
b Notes
During copying, other operations cannot be performed. While copying JPEG image files, timer recordings are unavailable. If the timer is set during copying, the recorder starts the timer recording after copying is finished.
1
SYSTEM MENU </M/m/,, ENTER
Insert a disc that you are going to copy to the HDD or connect the USB device to the USB jack on the recorder. Press SYSTEM MENU.
The System Menu appears.
2 3
8 9
Repeat step 7 to select all of the albums or JPEG image files you want to copy. Press ,.
The sub-menu appears.
1 2 3 4
118
119
5 6 7
Press ENTER, and select a JPEG image file using M/m. Press ,.
The sub-menu appears.
4 5 6 7 8
1 2 3 4 5
b Notes
You may not be able to play the slideshow depending on DVD equipment. You cannot copy JPEG image files to a recordable DVD which has been recorded using other recorders/devices. DATA DVDs finalised on this recorder may not be able to play on other equipment (page 45). No more than 99 slideshows can be recorded to a disc. When copying an album containing more than 99 JPEG image files to a disc, slideshows will be created with every 99 JPEG image files and recorded to a disc. For DVD-Rs, the available disc space does not increase even if you erase slideshows.
Repeat step 8 to select all of the albums or JPEG image files you want to copy.
The sub-menu appears.
10 Press ,. 6 11 Select Copy, and press ENTER. 12 Select the destination album using M/
m, and press ENTER.
To cancel, select No.
Repeat step 8 to select all of the JPEG image files you want to copy.
The sub-menu appears.
b Note
Albums or JPEG image files are not copied to the HDD in the following cases. when the HDD disc space is insufficient for copying. when there are already the maximum number of files and/or albums on the HDD.
8 9
Repeat step 7 to select all of the albums you want to copy. Press ,.
The sub-menu appears.
The selected JPEG image files are copied in the PICTURE folder on the disc. The JPEG image file names are automatically labelled as PHOT****. If you want to play the disc on other DVD equipment, finalise the disc (page 45). To cancel, select No.
1 2 3
Switch to the album list in step 8. For instructions, see To switch between the album list and JPEG image file list on page 123. Select an album using M/m, and press <.
,continued
120
121
1-29
Switch to the JPEG image file list. For instructions, see To switch between the album list and JPEG image file list on page 123. Select a JPEG image file using M/m, and press ENTER.
C Sub-menu:
Press , to display the sub-menu. The sub-menu displays options applicable only to the selected item. The displayed options differ depending upon the model, situation, and disc type.
z Hints See 8. Reformatting a Disc (page 47) to format DVD-RWs/DVD-Rs in Video mode. See the Photo Album list to check which albums have been copied (page 122).
b Notes
You may not be able to play the slideshow depending on DVD equipment. You cannot copy JPEG image files to a recordable DVD which has been recorded using other recorders/devices. DATA DVDs finalised on this recorder may not be able to play on other equipment (page 45). No more than 99 slideshows can be recorded to a disc. For DVD-Rs, the available disc space does not increase even if you erase slideshows.
ANGLE SYSTEM MENU EXIT/ O RETURN </M/m/,, ENTER
4-Photo List
m
Sub-menu
D Scroll bar:
Appears when all of the JPEG image files do not fit on the list. To view the hidden JPEG image files, press M/m.
.
H X ZOOM
>
x
1 2 3
1-Photo List
F Disc type and remaining space of current disc To scroll the list display by page (Page mode)
Press ./> while the Photo Album list is displayed. Each time you press ./ >, the entire Photo Album list changes to the next/previous page of albums/JPEG image files.
JPEG Image Files
To switch between the album list and JPEG image file list A Album name B Album size
1 2 3
Press < while the Photo Album list is displayed. Select Display Mode using M/m, and press ENTER. Select File or Album using M/m, and press ENTER.
122
,continued
123
To rotate an image
Press ANGLE repeatedly during a slideshow. Each time you press ANGLE, the image turns clockwise by 90.
z Hint You can start a slideshow by selecting Start Slideshow from the sub-menu.
b Note
The thumbnail for a file that cannot be playable on the recorder is displayed as .
Select View/Edit Photos on the HDD in step 3 of Using the Photo Album List on page 122. The Photo Album list appears. Switch between the album list and JPEG image file list, if necessary. Select an album or JPEG image file using M/m, and press ,. Select Start Audio Slideshow, and press ENTER. Select a genre using </,. For details about assigning a genre, see Managing Audio Tracks on the Music Jukebox on page 117. Select Start, and press ENTER. The slideshow and the playback from the first track of the selected genre start.
2 3 4
1 2
1 2 3 4 5
b Notes
Depending on the aspect ratio, some pictures may be displayed with black bands at top and bottom, or left and right. Large picture files may take a few seconds to display. This is not a malfunction. All albums or tracks in the selected genre will be played during Slideshow even if some albums or tracks are set to skip.
1 2
Select a JPEG image file, and press ,. Select Detailed Information, and press ENTER. The detailed information for the selected JPEG image file appears.
To stop a slideshow
Press x (stop) or O RETURN.
Playing a slideshow
To pause a slideshow
Press X (pause). Note that only slideshow pauses and the sound continues to play.
To zoom an image
Press ZOOM repeatedly during a slideshow. Each time you press ZOOM, the magnification changes as shown below. 2 t 4 t normal magnification You can move the area you want to zoom using </M/m/,.
124
125
1-30
Rename Album: Changes the selected album name (page 42). Protect Album Contents: Protects all JPEG image files in the selected album. Cancel Protection: Cancels protection of all JPEG image files in the selected album. Copy to DVD: Copies the selected album or JPEG image file to a DVD (page 120). Multi-Mode: Selects multiple albums or JPEG image files to edit. Copy all to HDD: Copies all the albums and JPEG image files to the HDD (page 118). Copy to HDD: Copies the selected album or JPEG image file to the HDD (page 118). File Options Erase: Erases the selected JPEG image file. Copy: Copies the selected JPEG image file (page 119). Rename File: Changes the selected JPEG image file name (page 42). Protect: Protects the selected JPEG image file. Select again to cancel the protection. Print: Prints the selected JPEG image file (page 126). Detailed Information: Displays the detailed information for the selected JPEG image file (page 124). Single-Mode: Cancels Multi-Mode.
2 3 4 5
To cancel printing
Press ENTER.
7 8
DVD recorder
to USB jack
PictBridge-compatible printer
11 Press ,.
The sub-menu appears.
126
127
Press </, repeatedly until the programme position of the station that carries a time signal appears. Press m to select Start, and press ENTER. If the recorder does not receive a time signal from any station, press O RETURN and set the clock manually. If the Auto Clock Set function did not set the clock correctly for your local area, try another station for the Auto Clock Set function or set the clock manually.
Optimise HDD
As you record, erase and edit recordings repeatedly, the HDD file system gradually becomes fragmented. To clean up all the fragmented files, optimise the HDD periodically. When the HDD needs optimising, a message recommending optimisation will appear automatically.
1 2 3
Press SYSTEM MENU while the recorder is in stop mode. Select Initial Setup, and press ENTER. Select Basic, and press ENTER.
The Basic setup appears with the following options. The default settings are underlined. To turn off the display, press SYSTEM MENU.
1 2
Press SYSTEM MENU while the recorder is in stop mode. Select Disc Setup, and press ENTER.
The Disc Setup setup appears with the following options. The default settings are underlined.
1 2
Select Optimise HDD in Disc Setup, and press ENTER. Select Start, and press ENTER. A progress bar appears and the optimisation starts. To cancel optimisation, press ENTER. The HDD will be partly optimised.
1 2
Select Clock Setting in Basic, and press ENTER. Select Manual, and press ENTER.
b Notes
It will take about eight hours to optimise the HDD. During optimisation, other operations, such as recording or playback, cannot be performed. You cannot optimise the HDD when the HDD disc space is insufficient for optimising. Erase titles to open up disc space (page 92).
Basic
Input Disc Name You can label a disc. For details, see page 43. Protect Disc You can protect a disc against erasure. For details, see page 44. Format DVD-RW (DVD-RW only) The recorder automatically starts formatting in VR mode or Video mode, whichever is selected below, when a new, unformatted DVD-RW is inserted.
VR Mode Video Mode Automatically formats the disc in VR mode. Automatically formats the disc in Video mode.
Format HDD.
You can format the HDD and resolve the problem when the hard disk error occurred. Format HDD. can be selected only when the hard disk needs formatting. Note that all of the recorded content on the HDD will be erased.
Clock Setting
The recorder will automatically set the clock when any digital channels have been scanned and stored. Auto (Auto Clock Set) Turns on the Auto Clock Set function when a programme position in your local area broadcasts a time signal.
3 4
Press </, to select the time zone for your area, and press m. Select On if you are now on summer time, and press ENTER.
1 2
Select Format HDD. in Disc Setup, and press ENTER. Select Start, and press ENTER.
1 2
Select Clock Setting in Basic, and press ENTER. Select Auto, and press ENTER.
Format
You can manually re-format a DVD+RW, DVD-RW, or DVD-R disc to make a blank disc. For details, see page 47.
128
,continued
129
1-31
Press M/m to set the day, and press ,. Set the month, year, hour, and minutes in sequence. Press </, to select the item to be set, then press M/m to set the numbers. The day of the week is set automatically. To change the numbers, press < to return to the item to be changed, and press M/m.
HELP Setting
On Off Displays Help information for GUI displays. Does not set to HELP setting mode.
1 2
Select Add New Channels in Digital Tuner, and press ENTER. Select Next Screen, and press ENTER. The recorder scans channels and stores them. To cancel the scan, press SYSTEM MENU or EXIT.
1 2 3
Press SYSTEM MENU while the recorder is in stop mode. Select Initial Setup, and press ENTER. Select Digital Tuner, and press ENTER.
The Digital Tuner setup display appears with the following options. The default settings are underlined. To turn off the display, press SYSTEM MENU.
Channel Sort
After the programme positions have been set, you can change the order of each programme position in the displayed list.
1 2
b Notes
When picture noise appears after you change the Input Line System setting, change the Input Colour System setting (page 136). If picture noise still appears, hold down x (stop) on the recorder, and press INPUT on the recorder. When you change the Input Line System setting, the Dubbing List is erased.
Select Channel Sort in Digital Tuner, and press ENTER. Select Next Screen, and press ENTER.
1 2 3
Select Easy Setup in Basic, and press ENTER. Select Start, and press ENTER. Follow the instructions for Easy Setup (page 26) from step 2.
Power Save
Selects whether this recorder is in power save mode when the power is turned off (standby).
Mode 1 Only antenna input signals are output to the connected TV when the recorder is in standby. No input signals are output when the recorder is in standby. Does not set to power save mode. Normally, select this setting.
Replace Channels
Scans available digital channels, and replaces all the channels already stored in the channel list with the scanned results.
Press M/m to select a programme position you want to move, and press ENTER. To display other pages, press M/m repeatedly.
Settings and Adjustments
Mode 2 Off
1 2 3
Select Replace Channels in Digital Tuner, and press ENTER. Select Next Screen, and press ENTER. Select your country/region using </,, and press ENTER. The recorder scans available digital channels and stores them. To cancel the scan, press SYSTEM MENU or EXIT. If any programme positions are unused or contain unwanted channels, you can disable them (page 132).
b Note
Power Save mode does not function in the following cases, even when Power Save is set to Mode 1 or Mode 2. There is a timer setting with VPS / PDC in the SCHEDULE list. The SMARTLINK features are not available when Power Save is set to Mode 1 or Mode 2.
Press M/m to select the programme position number to swap for the one selected in step 3, and press ENTER. The programme position numbers are swapped. To move other programme positions, repeat from step 3.
b Note
The timer settings for the replaced channels are deleted.
,continued
130
131
Channel Options
You can skip or lock certain channels.
Signal Check
You can check the signal strength and quality of the channel.
Download from TV
1 2 3
Select Channel Options in Digital Tuner, and press ENTER. Select Next Screen, and press ENTER. Enter your four-digit password using the number buttons, and press ENTER. To set a password, see page 145.
1 2
Select Signal Check in Digital Tuner, and press ENTER. Select Next Screen, and press ENTER.
If you connect a TV to this recorder with SMARTLINK, you can preset programme positions by downloading from your TV. For details, refer to the operating instructions supplied with your TV.
1 2
Select Download from TV, and press ENTER. Select your country/region using </,, and press ENTER. The tuner preset data will be downloaded from your TV to this recorder. If any programme positions are unused or contain unwanted channels, you can disable them (page 134).
1 2 3
To check the signal strength and quality of other channels, select a channel using </,.
Press SYSTEM MENU while the recorder is in stop mode. Select Initial Setup, and press ENTER. Select Analog Tuner, and press ENTER.
The Analog Tuner setup appears with the following options. The default settings are underlined. To turn off the display, press SYSTEM MENU.
Manual CH Setting
Presets programme positions manually. If some programme positions could not be set using the Easy Setup function, you can set them manually. If there is no sound or if the picture is distorted, the wrong tuner system may have been preset during Easy Setup. Set the correct tuner system manually in the steps below.
4 5
Select the programme position you want to skip or lock using M/m, and press ENTER. Select an option, and press ENTER. To skip the programme position, select . To lock the programme position, select . A check mark appears in the check box next to the selected programme position.
D.TV Language
Selects main and sub audio/subtitle languages or teletext language for bilingual programmes.
1 2
Select D.TV Language in Digital Tuner, and press ENTER. Select Next Screen, and press ENTER.
Select Manual CH Setting in Analog Tuner, and press ENTER. Select Next Screen, and press ENTER. Select your country/region using </,, and press ENTER.
Programme position
Auto Skip
Selects whether to skip radio or data channels.
Off Radio Data Radio & Data No channels are skipped. Radio channels are skipped. Data channels are skipped. Radio and data channels are skipped when selecting channels.
2 3
3 4
1 2 3
Select Auto Channel Setting in Analog Tuner, and press ENTER. Select Auto Scan, and press ENTER. Select your country/region using </,, and press ENTER. The programme position order will be set according to the country/region you set. If any programme positions are unused or contain unwanted channels, you can disable them (page 134).
4 5
Press ./> to select the programme position. Select the item you want to change using M/m, and change the settings using </ ,, then press ENTER. To preset another programme position, repeat from step 4.
,continued
132
133
1-32
Skip
On Select this when the programme position is unused or contains unwanted channels. The selected position will be skipped when you press PROG +/. Does not skip the selected programme position.
Sound System
Select an available TV system (page 135).
B/G Select this when in West European countries, except those listed in Receivable channels on page 135. Select this when in East European countries. Select this when in Great Britain/Ireland. Select this when in France.
Receivable channels
TV system Channel coverage
Channel Swapping
After the programme positions have been set, you can change the order of each programme position in the display list.
BG (West European E2 E12 VHF Countries, except Italia A H VHF those listed below) E21 E69 UHF S1 S20 CATV S21 S41 HYPER S01 S05 CATV DK (East European Countries) R1 R12 VHF R21 R69 UHF S1 S20 CATV
1 2
D/K Off I
Select Channel Swapping in Analog Tuner, and press ENTER. Select Next Screen, and press ENTER.
CH System
Select the region to get the best broadcast reception. FR Western Euro UK & IE Eastern Euro Select this when in France. Select this when in West European countries. Select this when in Great Britain/Ireland. Select this when in East European countries. L
Name
Changes or enters a new station name (up to 5 characters). The recorder must receive programme position information (e.g., SMARTLINK information) for station names to appear automatically. Press ,, then press </, repeatedly to select a character. To change the characters, press M/m to move the cursor, and press </,.
S21 S41 HYPER S01 S05 CATV I (Great Britain/ Ireland) Ireland A J VHF South Africa 4 11, 13 VHF B21 B69 UHF S1 S20 CATV S21 S41 HYPER S01 S05 CATV L* (France) F2 F10 VHF F21 F69 UHF B Q CATV S21 S41 HYPER
* To receive broadcasts in France, select L.
Press M/m to select the programme position number you want to swap, and press ,. To display other pages, press ./ > repeatedly. Press M/m to select the programme position number to swap for the one selected in step 3, and press ENTER. The programme position numbers are swapped. To swap the programme position number of another station, repeat from step 3.
AFT
On Turns on the Auto Fine Tuning function. Normally select this position. Allows you to adjust the picture manually.
Decoder
Sets the external decoder (PAY-TV/Canal Plus analogue decoder) channels. For details, see page 34.
Off
Channel
Press </, repeatedly until the programme position you want is displayed. To select a cable or satellite programme position, press </, until the programme position you want is displayed.
If the Auto Fine Tuning function does not work effectively, select Off and press m. Press </, to obtain a clearer picture, and press ENTER.
134
135
z Hint When Input Line System is set to NTSC, you can select Auto, 3.58NTSC, or PAL-60.
LINE 1 In
Selects a method of inputting video signals for the LINE 1/DECODER jack. The picture will not be clear if this setting does not match the type of video input signal.
Video S-Video RGB Decoder Inputs video signals. Inputs S-video signals. Inputs RGB signals. Select this when connecting to an external decoder (PAY-TV/Canal Plus analogue decoder). If you connect to a cable box/ satellite receiver such as CanalSat, do not select this option.
b Note
Input Colour System cannot be set when viewing digital broadcasts.
1 2 3
1 2 3
Press SYSTEM MENU while the recorder is in stop mode. Select Initial Setup, and press ENTER. Select Audio In, and press ENTER.
The Audio In setup appears with the following options. The default settings are underlined.
Press SYSTEM MENU while the recorder is in stop mode. Select Initial Setup, and press ENTER. Select Video In/Out, and press ENTER.
The Video In/Out setup appears with the following options. The default settings are underlined.
b Notes
When you set LINE 3 Out to RGB, you cannot set Component Video Out. When you connect the recorder to a monitor or projector via only the COMPONENT VIDEO OUT jacks, do not set LINE 3 Out to RGB. If you set LINE 3 Out to RGB, in this case, the picture may not appear. When picture noise appears after you set the recorder to progressive format, hold down x (stop) on the recorder, and press Z (open/close) on the recorder. No video signals are output when using the HDMI connection.
NTSC on PAL TV
Sets the recorder to convert signals of the NTSC colour system to the PAL colour system to play NTSC discs on PAL-only TVs. Refer to the operating instructions supplied with your TV.
On Off Plays NTSC discs on PALonly TVs. Select this if the connected TV is a multi-system (NTSC-compatible) TV.
LINE 3 Out
Selects a method of outputting video signals for the LINE 3 TV jack.
Video S-Video RGB Outputs video signals. Outputs S-video signals. Outputs RGB signals.
PAL
b Notes
If your TV does not accept S-video or RGB signals, the image will not be displayed in the selected method on the TV screen even if you select S-Video or RGB. See the instructions supplied with your TV. SMARTLINK is available only when Video is selected. RGB signals are not output when using the HDMI connection.
SECAM
136
137
1-33
External Audio
Stereo Select this when receiving stereo programmes from connected equipment. Select this when receiving bilingual programmes from connected equipment.
Bilingual
Off
b Note
When receiving audio input signals from the DV input jack, the recorder automatically selects Stereo or Bilingual regardless of the External Audio setting.
b Note
When HDMI output is performed to equipment not compatible with DTS signals, the signals will not be output regardless of the DTS Output setting.
Bilingual Recording
Selects the sound to be recorded.
A/L Records the main sound for the bilingual programme. Records the sub sound for the bilingual programme.
1 2 3
Press SYSTEM MENU while the recorder is in stop mode. Select Initial Setup, and press ENTER. Select Audio Out, and press ENTER.
The Audio Out setup appears with the following options. The default settings are underlined.
b Note
If the HDMI OUT jack is connected to equipment not compatible with MPEG audio signals, the PCM signals will be automatically output even when you select MPEG.
B/R
b Note
When recording a bilingual audio signal to the HDD (when HDD Recording Format is set to Video Mode Off (page 144) (except in PCM mode)) or a DVD-RW/DVD-R in VR mode (except in PCM mode), both audio channels are recorded and you can select the sound when playing.
b Notes
96 kHz PCM Output setting has no effect when audio signals are output from the LINE 2 OUT (R-AUDIO-L) jacks or LINE 3 TV/LINE 1/ DECODER jack. If the sampling frequency is 96 kHz, signals are simply converted to analogue signals and output. If the HDMI OUT jack is connected to equipment not compatible with 96 kHz signals, 48 kHz PCM will be automatically output even when you select 96 kHz.
DV Input
Select the setting for the audio input when DV camcorder dubbing. Select Mix (Stereo 1: 75 %)/Mix (Stereo 1: 50 %)/Mix (Stereo 1: 25 %) or Stereo 2 only if you have added a second audio when recording with your digital video camera.
Stereo 1 Records original sound only. Normally select this when dubbing a DV format tape. Records additional audio only.
Off
b Note
Records both stereo 1 and 2.
If the HDMI OUT jack is connected to equipment not compatible with Dolby Digital signals, the PCM signals will be automatically output even when you select Dolby Digital.
138
139
Auto Language
The Auto Language function is available when Audio Language and Subtitle Language are set to the same language, and Subtitle Display is set to On.
On For DVD VIDEOs whose main audio track is the language you set in Audio Language and Subtitle Language, the recorder plays the main audio track without subtitles. For DVD VIDEOs whose main audio track is not the language you set in Audio Language and Subtitle Language, the recorder plays the main audio track with subtitles in the language you set. Turns off the function.
Manual recording mode The table below shows the approximate recording times for the HDD and the different DVD types in each manual recording mode, as well as the standard recording mode equivalents. The recording time for the HDD
Approx. recording time (hours) Recording RDRRDRRDRRDRmode HXD770 HXD870 HXD970 HXD1070 HQ+*1 17 PCM*2 25 MN32 (HQ) MN31 MN30 MN29 25 27 29 31 33 36 37 39 42 44 46 51 54 59 63 67 72 75 78 82 86 90 93 100 110 23 34 34 36 39 42 45 48 50 53 56 59 62 68 73 79 84 90 96 100 105 110 115 120 125 135 150 36 53 53 57 61 66 70 75 79 84 88 92 97 105 115 120 130 140 150 155 165 175 185 190 200 210 235 73 105 105 115 120 130 140 150 155 165 175 185 195 210 230 245 265 Settings and Adjustments 280 300 315 335 350 370 390 405 420 475
,continued
1 2 3
Press SYSTEM MENU while the recorder is in stop mode. Select Initial Setup, and press ENTER. Select Language, and press ENTER.
The Language setup appears with the following options. The default settings are underlined.
1 2 3
Press SYSTEM MENU while the recorder is in stop mode. Select Initial Setup, and press ENTER. Select Recording, and press ENTER.
The Recording setup appears with the following options. The default settings are underlined.
Off
OSD Language
Switches the display language on the screen.
Subtitle Display
On Displays subtitles. Does not display subtitles.
MN22 MN21 (SP) MN20 MN19 MN18 (LSP) MN17 MN16 MN15 (ESP) MN14 MN13 MN12 MN11 MN10 MN9 (LP) MN8
Off
Off
b Note
If you select a language in DVD Menu Language, Subtitle Language, or Audio Language that is not recorded on the DVD VIDEO, one of the recorded languages will be automatically selected.
140
141
1-34
Approx. recording time (hours) Recording RDRRDRRDRRDRmode HXD770 HXD870 HXD970 HXD1070 MN7 MN6 (EP) MN5 MN4 (SLP) MN3 (SEP) MN2 MN1 120 150 175 200 255 300 340 165 200 235 270 340 405 455 265 315 370 425 530 635 710 530 635
Approx. recording time (hours) Recording mode DVD+RW/ DVD-RW/ DVD+R/ DVD-R DVD+R DL/ DVD-R DL
Resolution The first figure refers to when Input Line System is set to NTSC; the second when set to PAL/SECAM in the Basic setup (page 130). For the HDD (HDD Recording Format is set to Video Mode Off)/DVD-RW (VR mode)/ DVD-R (VR mode) HQ+, PCM, MN32 to MN16: 720 480 / 720 576 MN15 to MN12: 544 480 / 544 576 MN11 to MN9: 480 480 / 544 576 MN8 and MN7: 352 480 / 352 576 MN6 to MN1: 352 240 / 352 288 For the HDD (HDD Recording Format is set to Video Mode On)/DVD+RW/DVD-RW (Video mode)/DVD+R/DVD-R (Video mode) HQ+, PCM, MN32 to MN9: 720 480 / 720 576 MN8 and MN7: 352 480 / 352 576 MN6 to MN1: 352 240 / 352 288
MN12 745 850 1060 1275 1420 MN11 MN10 MN9 (LP) MN8 MN7 MN6*3 (EP) MN5*3 MN4*3 (SLP) MN2*3*4 DVD+R DL/ DVD-R DL 1 hr. 51 min. 1 hr. 51 min. 1 hr. 57 min. MN1*3*4
*1
3 hr. 30 min. 6 hr. 17 min. 3 hr. 40 min. 6 hr. 35 min. 3 hr. 50 min. 6 hr. 53 min. 4 7 hr. 11 min.
Off
4 hr. 30 min. 8 hr. 4 min. 5 6 7 8 8 hr. 58 min. 10 hr. 46 min. 12 hr. 34 min. 14 hr. 21 min. 17 hr. 57 min. 21 hr. 32 min. 24
b Notes
The actual chapter mark interval may vary depending on the amount of information contained in the video to be recorded. Chapter marks are automatically inserted, where the date or time information changes on the tape, when Auto Chapter (HDD/VR) is set to On during DV dubbing to the HDD or a DVD-RW/ DVD-R (VR mode).
PCM*2 MN32 (HQ) MN31 MN30 MN29 MN28 MN27 MN26 (HSP) MN25 MN24 MN23 MN22 MN21 (SP) MN20 MN19 MN18 (LSP) MN17 MN16 MN15 (ESP) MN14 MN13
1 hr. 10 min. 2 hr. 6 min. 1 hr. 15 min. 2 hr. 15 min. 1 hr. 20 min. 2 hr. 24 min. 1 hr. 25 min. 2 hr. 33 min. 1 hr. 30 min. 2 hr. 41 min. 1 hr. 35 min. 2 hr. 50 min. 1 hr. 40 min. 2 hr. 59 min. 1 hr. 45 min. 3 hr. 8 min. 1 hr. 50 min. 3 hr. 17 min. 2 3 hr. 35 min.
Records in higher quality (15 Mbps). HQ+ mode is not available for DVDs. When recording to DVDs, the recording mode automatically switches to HQ mode even if you set to HQ+ mode. *2 Audio signals are recorded in 48kHz PCM format, and video signals are recorded in HQ mode. When recording a bilingual programme, select the sound to be recorded (page 138). *3 Titles recorded in MN6 or lower mode cannot be dubbed to DVD+RWs/DVD+Rs at high speed. *4 SEP, MN1, MN2, or MN3 mode is not available for DVD+RWs/DVD+Rs/DVD+R DLs. When recording to DVD+RWs/DVD+Rs, the recording mode automatically switches to SLP mode even if you set to SEP, MN1, MN2, or MN3 mode. z Hint Audio signals are recorded in Dolby Digital 2 ch format (except for PCM mode).
Off
Subtitle Recording
On Off Records digital broadcast subtitles. No digital broadcast subtitles are recorded.
Set Thumbnail
Selects a scene for the thumbnail picture shown in the Title List.
0 seconds The first frame of the title is set for the thumbnail picture. The frame at 30 seconds from the first frame is set for the thumbnail picture. The frame at 3 minutes from the first frame is set for the thumbnail picture.
Inserts chapter marks at approximately 10-minute intervals. Inserts chapter marks at approximately 15-minute intervals.
2 hr. 10 min. 3 hr. 53 min. 2 hr. 20 min. 4 hr. 11 min. 2 hr. 30 min. 4 hr. 29 min. 2 hr. 40 min. 4 hr. 47 min. 2 hr. 50 min. 5 hr. 5 min. 3 5 hr. 23 min.
15 minutes
30 seconds
3 minutes
142
,continued
143
Video Mode On
1 2 3
Press SYSTEM MENU while the recorder is in stop mode. Select Initial Setup, and press ENTER. Select Playback, and press ENTER.
The Playback setup appears with the following options. The default settings are underlined.
1
16:9
Press SYSTEM MENU while the recorder is in stop mode. Select Initial Setup, and press ENTER. Select Parental Lock, and press ENTER.
The Parental Lock setup display appears with the following options. The default settings are underlined. To turn off the display, press SYSTEM MENU.
2
b Note
Depending on the disc, 4:3 Letter Box may be selected automatically instead of 4:3 Pan Scan or vice-versa.
z Hint The HDD contents recorded in Video mode can be dubbed to a disc at high speed (page 98).
Pause Mode
Selects the picture quality in pause mode.
Field Frame Auto Outputs a stable, generally shake-free image. Outputs a sharp image, but may be prone to shake. Outputs a generally less sharp but more stable still image.
TV Type
Select the playback picture size according to the type of connected TV (wide-screen/wide mode TV or conventional 4:3 screen TV).
4:3 Letter Box Select this when connecting to a 4:3 screen TV. Displays a wide picture with bands on the upper and lower portions of the screen. 4:3 Pan Scan Select this when connecting to a 4:3 screen TV. Automatically displays a wide picture on the entire screen and cuts off the portions that do not fit. Select this when connecting to a wide-screen TV or TV with a wide mode function.
1 2
Off
Select Set Password or Change Password in Parental Lock, and press ENTER. Select Next Screen, and press ENTER. The display for registering a password appears. Example: when you select Set Password in step 1
16:9
Off
144
,continued
145
1-35
Enter your four-digit password using the number buttons, and press ENTER. To change the password, enter your four-digit password in the Current Password row using the number buttons, and press ENTER. Then enter a new password in the New Password row using the number buttons. The password setting/password changing setting is completed.
Select Code (geographic area) as the playback limitation level, and press ENTER. The area is selected. When you select Number, press the number buttons to select and enter a country/area code in the table (page 168), and press ENTER. Select Change Level, and press ENTER.
Sends 720576p video signals. Sends 720480p video signals. Sends 720576i video signals. Sends 720480i video signals.
b Note
If you forgot your password, reset the recorder (page 158).
1 2 3
6 7
Enter your four-digit password using the number buttons, and press ENTER. Select the level. The lower the value, the stricter the limitation. Discs rated higher than the selected level will be restricted. Press ENTER. The DVD Playback setting is completed. To cancel the DVD Playback setting for the disc, select Off in step 7.
Press SYSTEM MENU while the recorder is in stop mode. Select Initial Setup, and press ENTER. Select HDMI Output, and press ENTER.
The HDMI Output setup appears with the following options. The default settings are underlined. After connecting equipment to the HDMI OUT jack, Screen Resolution, 4:3 Video Output, and Colour are automatically set to the appropriate settings.
Can be selected only when Input Line System is set to PAL/SECAM in the Basic setup (page 130). *2 Can be selected only when Input Line System is set to NTSC in the Basic setup (page 130).
b Notes
When picture noise appears after you change the Screen Resolution setting, hold down x (stop) on the recorder, and press Z (open/close) on the recorder. When Colour is set to YCbCr 4:2:2 in the HDMI Output setup, you cannot select 720 x 576i (or 720 x 480i).
Select DVD Playback in Parental Lock, and press ENTER. To register a new password, see Set Password/Change Password on page 145.
Viewing of some digital TV programmes can be limited according to the age limit you set. To watch programmes that exceed the age limit you set, your password is required. (for customers in France/Denmark/Finland, or Sweden only)
Screen Resolution
Selects the type of video signals output from the HDMI OUT jack. If the picture is not clear, natural or to your satisfaction, try another option that suits the disc and your TV/projector, etc. For details, refer also to the instruction manual supplied with the TV/ projector, etc.
1920 x 1080p 1920 x 1080i 1280 x 720p Sends 19201080p video signals. Sends 19201080i video signals. Sends 1280720p video signals.
Normal
1 2 3
Enter your four-digit password using the number buttons, and press ENTER.
Select D.TV Age Limit in Parental Lock, and press ENTER. Select Next Screen, and press ENTER. The D.TV Age Limit display appears. Enter your four-digit password using the number buttons, and press ENTER. Select an age as limitation level, and press ENTER. The setting is completed. To cancel the setting, select Off.
3 4
146
,continued
147
Colour
Selects the method of outputting video signals for the HDMI jack.
RGB (0-255) Outputs RGB (0-255) signals. Select this when connecting to an RGB (0255) device. Outputs RGB (16-235) signals. Select this if colours appear overly rich and the black appears too deep. Outputs 10-bit YCbCr 4:2:2 component signals. Outputs 8-bit YCbCr 4:4:4 component signals.
HDMI Control
On Allows you to use the HDMI control features (page 21). Turns off the function.
Command Mode
Changes the Command Mode of the recorder to avoid interference with your other Sony DVD recorder or player.
1 2
Off
1 2 3
Select Command Mode in Options, and press ENTER. Select a Command Mode (DVD1, DVD2, or DVD3), and press ENTER.
RGB (16-235)
Press SYSTEM MENU while the recorder is in stop mode. Select Initial Setup, and press ENTER. Select Options or Options 2, and press ENTER.
The Options or Options 2 setup appears with the following options. The default settings are underlined. Example: Options setup
b Note
The default command mode setting for this recorder and the supplied remote is DVD3. The remote does not function if different command modes are set for the recorder and remote. Set the same command mode.
b Notes
Some settings may not be available depending on the connected device. When a DVI device is connected, you cannot select YCbCr 4:2:2 or YCbCr 4:4:4. When Screen Resolution is set to 720 x 576i (or 720 x 480i) in the HDMI Output setup, you cannot select YCbCr 4:2:2.
Set the Command Mode for the remote so it matches the Command Mode for the recorder you set above. Follow the steps below to set the Command Mode on the remote. 1 Hold down ENTER. 2 While holding down ENTER, enter the Command Mode code number using the number buttons.
Command Mode Code number DVD1 number button 1 number button 2 number button 3
Audio Output
Selects the type of audio signal output from the HDMI OUT jack.
Auto Outputs Dolby Digital, MPEG and DTS audio signals as a bitstream signal. Normally select this position. Converts all audio signals except for DTS signals to PCM. Select this if the connected device is compatible with bitstream audio.
Options
On Screen Display
On Automatically displays information on the screen when the recorder is turned on, etc. Displays information only when DISPLAY is pressed.
DVD2 DVD3
3 Hold down both the number and ENTER buttons at the same time for more than three seconds.
z Hint You can check the Command Mode for the recorder in the front panel display.
PCM
Off
In the front panel display 1 appears. 2 appears. Either 1 or 2 does not appear.
Bitstream Priority
b Notes
The PCM signals may not be output even when you select Auto depending on the Audio Out settings, number of audio channels, and the HDMI-connected device. The Audio Output function is not available when a DVI device is connected.
148
,continued
149
1-36
SMARTLINK
This Recorder Only Allows you to use the SMARTLINK function with the recorder when the recorder is in standby mode.
Auto Update
On Updates the software automatically. Normally, select this position. Does not update the software automatically.
Troubleshooting
If you experience any of the following difficulties while using the recorder, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer.
Off Pass Through Allows you to use the SMARTLINK function with the connected equipment when the recorder is in standby mode.
Technical Info. You can check the current hardware and software versions of the digital tuner.
b Note
Set Power Save to Off in the Basic setup (page 130) to set SMARTLINK to Pass Through.
Options 2
USB
Restart USB Device Restarts the connected USB device if it does not respond to the recorder. If the connected USB device still does not work properly, try following: Turn the connected USB device off and on again. Disconnect and then connect the USB cable. Confirm Printer Displays the manufacturer and model name of the printer connected to the recorder. Note that this function may not work depending on the printer.
Power
The power does not turn on.
, Check that the mains lead is connected securely.
DivX
Registration Code Displays the registration code of DivX video files for this recorder. For more information, go to http:// www.divx.com/vod on the Internet.
Tuner
The channel is not found or stored or missed.
, Make sure that your aerial is properly connected to the recorder. , Confirm with your dealer that you are in an area that can receive a digital signal. , Check your aerial installation.
TV Pause
Selects the tuner for the TV Pause (page 87).
TVs Tuner Selects this when connecting the recorder to your TV using the SCART jack. Selects this when connecting the recorder to your TV not using the SCART jack.
Picture
There is no picture.
, , , , , , Re-connect all connecting cords securely. The connecting cords are damaged. Check the connection to your TV (page 15). Switch the input selector on your TV (such as to VCR and AV 1) so that the signal from the recorder appears on the TV screen. Check that the Video In/Out setup is set to the appropriate item that conforms to your system (page 136). If you connect the recorder to your TV via only the COMPONENT VIDEO OUT jacks, set Component Video Out in the Video In/Out setup to Progressive (page 136). A scrambled channel is selected. When playing a double-layer DVD, the video and audio may be momentarily interrupted at the point where the layers switch.
Software Update
You can check the current software version of the built-in digital tuner and keep it up to date with the latest software. Manual Update Updates the software manually.
Recorders Tuner
Additional Information
1 2 3 4
Select Software Update in Options, and press ENTER. Press Next Screen and press ENTER. Select Start, and press ENTER.
There is no picture or picture noise appears when connected to the HDMI OUT jack.
, Try the following: 1Turn the recorder off and on again. 2Turn the connected equipment off and on again. 3Disconnect and then connect the HDMI cord again.
Select Yes, and press ENTER. The update starts. To cancel, press SYSTEM MENU. The new software will be available next time the recorder is turned on.
, ,
150
,continued
151
, If the HDMI OUT jack is used for video output, changing the Screen Resolution setting in the HDMI Output setup may solve the problem (page 147). Connect the TV and the recorder using a video jack other than HDMI OUT, and switch the TVs input to the connected video input so that you can see the on-screen displays. Change the Screen Resolution setting in the HDMI Output setup, and switch the TVs input back to HDMI. If the picture still does not appear, repeat the steps and try other options. , The recorder is connected to an input device that is not HDCP compliant (page 19). , When picture noise appears after you change the Screen Resolution setting, hold down x (stop) on the recorder, and press Z (open/close) on the recorder.
The picture from equipment connected to the recorders input jack does not appear on the screen.
, If the equipment is connected to the LINE 1/DECODER jack, select L1 in the front panel display by pressing INPUT. If the equipment is connected to the LINE 2 IN jacks, select L2 in the front panel display by pressing INPUT.
The playback picture or TV programme from the equipment connected through the recorder is distorted.
, If the playback picture output from a DVD player, VCR, or tuner goes through your recorder before reaching your TV, the copyprotection signal applied to some programmes could affect picture quality. Disconnect the playback equipment in question and connect it directly to your TV.
Sound
There is no sound.
, Re-connect all connections securely. , The connecting cord is damaged. , The input source setting on the audio component or the connection to the audio component is incorrect. , The recorder is in reverse play, fastforward, slow motion, or pause mode. , If the audio signal does not come through the DIGITAL OUT (COAXIAL)/HDMI OUT jacks, check the Audio Out setup (page 138). , The recorder supports only MP3 audio, Dolby Digital and MPEG audio for DivX video files. Press AUDIO and select MP3 audio or MPEG audio.
The picture does not fill the screen, even though the picture size is set in TV Type in the Playback setup.
, The picture size of the title is fixed.
The programme position number in the programme listing does not match the broadcast station.
, There may be more than one channel lineup for your area. To change the channel lineup, select Editor in the Menu Bar of the GUIDE Plus+ system (page 69).
Additional Information
152
153
1-37
Playback
The recorder does not play any type of disc (except HDD).
, The disc is upside down. Insert the disc with the labelled side facing up. , The disc is not correctly inserted. , Moisture has condensed inside the recorder. In this case, if the recorder is on, leave it on (if it is off, leave it off) for about an hour until the moisture evaporates. , If the disc was recorded on another recorder and was not finalised (page 45), the recorder cannot play the disc.
Sound is noisy.
, When playing a CD with DTS sound tracks, noise will come from the LINE 2 OUT RAUDIO-L jacks, LINE 3 TV jack, or LINE 1/DECODER jack (page 109).
, Operate the recorder only after LOAD, FORMAT, or INFO WRITE disappears from the front panel display.
Nothing was recorded even though you set the timer setting correctly.
, There was a power failure during recording. , The recorders internal clock stopped due to a power failure that lasted for more than 1 hour. Reset the clock (page 129). , The channel was disabled after the timer recording was set. See Manual CH Setting on page 133. , The programme position was hidden after the timer recording was set. (See Disabling programme positions on page 70.) , Disconnect the mains lead from the mains, and connect it again. , The programme contains copy protection signals that restrict copying. , Another timer setting overlapped the timer setting (page 60, 78). , There is no DVD inside the recorder. , There is not enough disc space for the recording. , The set top box receiver was turned off. , The set top box controller was incorrectly connected (page 15). , The settings in Setup in the Menu bar have been changed (page 68). , The recorder was in the process of dubbing. , A scrambled channel is selected. , The channel activated Parental Lock is selected (page 146).
Additional Information
154
,continued
155
Recording does not stop immediately after you press x REC STOP.
Dubbing
You dubbed a title, but the title did not appear in the HDD Title List.
, The title contained a copy protection signal, so it was moved (page 99).
, It will take a few seconds for the recorder to input disc data before recording can stop. On-screen instructions may appear after pressing x REC STOP. In this case, follow the on-screen instructions.
, The remotes manufacturer code returned to the default setting when you replaced the batteries. Reset the code (page 24). , The remote is not pointed at the remote sensor on the recorder.
The disc tray does not open and TRAYLOCKED appears in the front panel display.
, Contact your Sony dealer or local authorized Sony service facility.
Others
The recorder does not detect a USB device connected to the recorder.
, Make sure that the USB device is securely connected to the recorder (page 126). , Check if the USB device or a cable is damaged. , Check if the USB device is on.
Timer recording is not complete or did not start from the beginning.
, There was a power failure during recording. If the power recovers when there is a timer recording, the recorder resumes recording. Should the power failure continue for more than 1 hour, reset the clock (page 129). , Another timer setting overlapped the timer setting (page 60, 78). , Disc space was not sufficient. , The VPS/PDC function is working.
Display
The clock has stopped.
, Set the clock again (page 129). , The clock stopped due to a power failure that lasted for more than 1 hour. Reset the clock (page 129).
The clock does not appear in the front panel display when the recorder is turned off.
, Front Panel Display is set to Off in the Options setup (page 149).
Remote control
The remote does not function.
, Different command modes are set for the recorder and remote. Set the same command mode (page 149). The default command mode setting for this recorder and the supplied remote is DVD3. You can check the current command mode in the front panel display (page 149). , The batteries are weak. , The remote is too far from the recorder.
The disc tray does not open after you press Z (open/close).
, It may take a few seconds for the disc tray to open after you have recorded or edited a DVD. This is because the recorder is adding disc data to the disc.
The Parental Lock does not work. Any buttons do not function and LOCKED appears in the front panel display.
, The recorder is locked. Cancel the Child Lock (page 81, 108). , Check the D.TV Age Limit setting in the Parental Lock setup (page 146).
156
,continued
157
1-38
To keep the disc clean, handle the disc by its edge. Do not touch the surface. Dust, fingerprints, or scratches on the disc may cause it to malfunction.
1 2
Make sure that the recorder is turned on and remove the disc. Hold down x (stop) on the recorder and press [/1 on the recorder.
All settings are reset and the recorder turns off.
Do not expose the disc to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight as the temperature may rise considerably inside the car. After playing, store the disc in its case. Clean the disc with a cleaning cloth. Wipe the disc from the centre out.
On adjusting volume
Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the speakers may be damaged when a peak level section is played.
On cleaning
Clean the cabinet, panel, and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine.
Do not use solvents such as benzine, thinner, commercially available cleaners, or anti-static spray intended for vinyl LPs. Do not use the following discs. A disc that has a non-standard shape (e.g., card, heart). A disc with a label or sticker on it. A disc that has cellophane tape or sticker adhesive on it.
On replacement of parts
In the event that this unit is repaired, repaired parts may be collected for reuse or recycling purposes.
Additional Information
158
159
Specifications
System Laser: Semiconductor laser Transmission standards (Digital broadcasting): DVB-T Channel coverage (Digital broadcasting): VHF: E5 to E12, F5 to F10, Italian D to H2 UHF: E21 to E69, B21 to B68, F21 to F69 Channel coverage (Analogue broadcasting): PAL (B/G, D/K, I)/SECAM (L) VHF: E2 to E12, R1 to R12, F2 to F10, Italian A to H, Ireland A to J, South Africa 4 to 11, 13 UHF: E21 to E69, R21 to R69, B21 to B69, F21 to F69 CATV: S01 to S05, S1 to S20, France B to Q HYPER: S21 to S41
The above channel coverage merely ensures the channel reception within these ranges. It does not guarantee the ability to receive signals in all circumstances. For details, see Receivable channels (page 135).
Video reception: Frequency synthesizer system Audio reception: Split carrier system Aerial out: 75-ohm asymmetrical aerial socket Timer: Clock: Quartz locked/Timer indication: 24-hour cycle (digital)/ Power back-up duration: 1 hour Video recording format: MPEG-2, MPEG-1 Audio recording format/applicable bit rate: Dolby Digital 2 ch 256 kbps/128 kbps (in EP, SLP, and SEP mode), PCM
Inputs and outputs LINE 2 OUT (AUDIO): Phono jack/2 Vrms/10 kilohms (VIDEO): Phono jack/1.0 Vp-p (S VIDEO): 4-pin mini DIN/Y: 1.0 Vp-p, C: 0.3 Vp-p (PAL) LINE 2 IN (AUDIO): Phono jack/2 Vrms/more than 22 kilohms (VIDEO): Phono jack/1.0 Vp-p (S VIDEO): 4-pin mini DIN/Y: 1.0 Vp-p, C: 0.3 Vp-p (PAL) LINE 3 TV: 21-pin CVBS OUT S-Video/RGB OUT (upstream) LINE 1/DECODER: 21-pin CVBS IN/OUT S-Video/RGB IN Decoder DV IN: 4-pin/i.LINK S100 DIGITAL OUT (COAXIAL): Phono jack/ 0.5 Vp-p/75 ohms COMPONENT VIDEO OUT (Y, PB/CB, PR/CR): Phono jack/Y: 1.0 Vp-p, PB/CB: 0.7 Vp-p, PR/CR: 0.7 Vp-p G-LINK: mini jack HDMI OUT: HDMI 19-pin-Standard Connector USB: USB jack Type A (For connecting digital still camera, Memory card reader and USB memory) USB jack Type B (For connecting PictBridge-compatible printers) General Power requirements: 220-240 V AC, 50/60 Hz Power consumption: 49 W Dimensions (approx.): 430 76.5 286 mm (width/height/ depth) incl. projecting parts Hard disk drive capacity: RDR-HXD770: 120 GB RDR-HXD870: 160 GB RDR-HXD970: 250 GB RDR-HXD1070: 500 GB Mass (approx.): 4.7 kg
Operating temperature: 5C to 35C Operating humidity: 25% to 80% Supplied accessories: Mains lead (1) Aerial cable (1) Remote commander (remote) (1) Set top box controller (1) R6 (size AA) batteries (2)
Specifications and design are subject to change without notice.
Notes on MP3 Audio Tracks, JPEG Image Files, and DivX Video Files
About MP3 audio tracks, JPEG image files, and DivX video files
MP3 is an audio compression technology that satisfies certain ISO/MPEG regulations. JPEG is an image compression technology. You can play MP3 (MPEG1 Audio Layer 3) format audio tracks and JPEG image files on the HDD or DATA CDs (CD-ROMs/CD-Rs/ CD-RWs) or JPEG image files on the HDD or DATA DVDs (DVD-ROMs/DVD+RWs/ DVD+Rs/DVD-RWs/DVD-Rs). DivX is a video file compression technology, developed by DivX, Inc. This product is an official DivX Certified product. You can play DATA CDs (CDROMs/CD-Rs/CD-RWs) and DATA DVDs (DVD-ROMs/DVD+RWs/DVD+Rs/DVDRWs/DVD-Rs) that contain DivX video files. DATA DVDs must be recorded according to ISO9660 Level 1, Level 2, Romeo, Joliet, or UDF (Universal Disk Format) 1.02, 1.50, 2.00*, or 2.01 format for the recorder to recognise the MP3 tracks, JPEG image files, and DivX video files. DATA CDs must be recorded according to ISO9660 Level 1, Level 2, Romeo, or Joliet format for the recorder to recognise the MP3 tracks, JPEG image files, and DivX video files. You can also play discs recorded in MultiSession/Border. See the instructions supplied with the disc drives and the recording software (not supplied) for details on the recording format.
* Not available for MP3 audio tracks.
Additional Information
160
161
1-39
MP3 audio tracks, JPEG image files, or DivX video files that the recorder can play
The recorder can play the following tracks and files: MP3 audio tracks with the extension .mp3. JPEG image files with the extension .jpeg or .jpg. Baseline JPEG image files that conform to the Exif 2.2* image files format, and Y:CB:CR is 4:4:4, 4:2:2, or 4:2:0. DivX video files with the extension .avi or .divx.
* Exchangeable Image File Format: The file format used by digital still cameras. z Hint Since a disc with many trees takes longer to start playback, it is recommended that you create albums with no more than two trees.
The recorder does not conform to audio tracks in mp3PRO format. The recorder cannot play a DivX video file of a size larger than 720 (width) 576 (height)/4 GB. The recorder may not play a DivX video file when the file has been combined from two or more DivX video files.
About i.LINK
The DV IN jack on this recorder is i.LINKcompliant for digital video cameras. This section describes the i.LINK standard and its features.
What is i.LINK?
i.LINK is a digital serial interface for handling digital video, digital audio and other data in two directions between equipment having the i.LINK jack, and for controlling other equipment. i.LINK-compatible equipment can be connected by a single i.LINK cable. Possible applications are operations and data transactions with various digital AV equipment. When two or more i.LINKcompatible equipment are connected to this recorder in a daisy chain, operations and data transactions are possible with not only the equipment that this recorder is connected to but also with other devices via the directly connected equipment. Note, however, that the method of operation sometimes varies according to the characteristics and specifications of the equipment to be connected, and that operations and data transactions are sometimes not possible on some connected equipment.
b Notes
The recorder will play any data with the extension .mp3, .jpeg, .jpg, .avi, or .divx even if they are not in MP3, JPEG, or DivX format. Playing these data may generate a loud noise which could damage your speaker system. Depending on the disc, normal playback may not be possible. For example, the picture may be unclear, playback may not appear smooth, the sound may skip, and so on. Depending on the disc, playback may take some time to start. Some files cannot be played. For MP3 audio tracks and DivX video files, the recorder can play up to 99 albums each on a DATA CD or DATA DVD. Up to 99 tracks and files under an album can be played. For JPEG image files, the recorder can load up to 99 albums and/or up to 999 files under an album on a DATA CD/DATA DVD or the connected USB device at a time. To view unloaded albums, reload them. Proceeding to the next or another album may take some time. The image size that can be displayed is limited. The following image sizes can be displayed: width 1605,120 pixels by height 1203,840 pixels. This recorder supports MP3 audio tracks recorded with a sampling frequency of 32 kHz, 44.1 kHz, and 48 kHz. No more than a 1 GB MP3 audio track can be played.
b Note
Normally, only one piece of equipment can be connected to this recorder by the i.LINK cable (DV connecting cable). When connecting this recorder to i.LINK-compatible equipment having two or more i.LINK jacks (DV jacks), see the instruction manual of the equipment to be connected.
Additional Information
162
163
wl PLAY MODE button (84, 89, 109, 111) ea TV 2 (volume) +/ buttons (24) e; TV t (input select) button (24)
Remote
J TV/DVD button (24) K SUBTITLE button (82) L (text) button (51) M MENU button (80) N Colour buttons (48, 65) O SYSTEM MENU button (76, 85, 100, 106, 112, 118, 128) TITLE LIST button (38, 80, 92) TOP MENU button (80) GUIDE button (48, 63) P TIMER button (53, 60) Q INFO (information) button (48, 63) R </M/m/,/ENTER button (26) S O RETURN button (26) EXIT button (131) T DISPLAY button (40) U / (instant replay/instant advance) buttons (82)
Front panel
A [/1 (on/standby) button (26) B (remote sensor) (24) C Disc tray (36) D Front panel display (166) E Z (open/close) button (36) F N (play) button (80, 108, 124) The N button has a tactile dot*. G x (stop) button (80, 108, 114, 124) H z REC button (36) I x REC STOP button (36) J HDD button/indicator (36) DVD button/indicator (36)
K PROGRAM +/ buttons (36) The + button has a tactile dot*. L INPUT (input select) button (61, 79) M LINE 2 IN (S VIDEO/VIDEO/ L(MONO) AUDIO R) jacks (32) N ONE-TOUCH DUB button (106) O P DV IN jack (104) USB jack (type A) (112, 118)
V ./> (previous/next) buttons (82, 108, 115) PAGE +/ buttons (48, 65) A HDD button (36) DVD button (36) B [/1 (on/standby) button (26) C Z (open/close) button (36) D PROG (programme) +/ buttons (36) The + button has a tactile dot*. E Number buttons (42, 89)
The number 5 button has a tactile dot*.
W mc / CM (search/slow/ freeze frame) buttons (82, 108, 115) DAY +/ buttons (65) X H (play) button (80, 108, 124) X (pause) button (82, 108, 115, 124) x (stop) button (80, 108, 114, 124)
The H button has a tactile dot*.
Additional Information
Y TV PAUSE button (87) Z z REC button (36) x REC STOP button (36) HDD/DVD DUB button (99) REC MODE button (36) wj ZOOM button (124) wk TV [/1 (on/standby) button (24)
,continued
F INPUT (input select) button (61, 79) G AUDIO button (82, 108)
The AUDIO button has a tactile dot*.
H CLEAR button (42, 84, 109, 110) I ANGLE button (80, 125)
164
165
1-40
Rear panel
Additional Information
A ANALOG AERIAL IN/OUT jacks (15) B LINE 2 OUT (R-AUDIO-L/VIDEO) jacks (19, 22) C LINE 1/DECODER jack (31) D G-LINK jack (17) E DIGITAL AERIAL IN/OUT jacks (15)
F HDMI OUT (high-definition multimedia interface out) jack (19, 22) G DIGITAL OUT (COAXIAL) jack (22) H AC IN terminal (23) I LINE 3 TV jack (19) J LINE 2 OUT (S VIDEO) jack (19) K COMPONENT VIDEO OUT (Y, PB/CB, PR/CR) jacks (19)
166
167
Country/Area Code
For details, see page 145.
Number 0118 0121 0120 0205 0218 0301 0312 0314 0411 0609 0618 0405 0811 0914 0904 0920 1016 1118 Area (Code) Argentina (ar) Australia (au) Austria (at) Belgium (be) Brazil (br) Canada (ca) Chile (cl) China (cn) Denmark (dk) Finland (fi) France (fr) Germany (de) Hong Kong (hk) India (in) Indonesia (id) Italy (it) Japan (jp) Korea (kr) Number 1325 1324 1412 1426 1415 1611 1608 1620 1821 1907 0519 1905 0308 2023 2008 0702 2119 Area (Code) Malaysia (my) Mexico (mx) Netherlands (nl) New Zealand (nz) Norway (no) Pakistan (pk) Philippines (ph) Portugal (pt) Russia (ru) Singapore (sg) Spain (es) Sweden (se) Switzerland (ch) Taiwan (tw) Thailand (th) United Kingdom (gb) USA (us)
168
1-41
MEMO
1-42E
Set
2-1
1 Tapping screw
Hole
3 Two claws
2-2
1 Three claws
2 Four claws
9 Flexible flat cable (17core)(CN203) 8 Flexible flat cable (11core)(CN202) q; FR-274 board
2-3
5 Connector (13p) (CN201) 4 Connector (4p) (CN203) ql ws Two screws (+PSW3 6) wd Clamp (L35) wf Connector (13p) (CN4501)
wg DVD drive w; Connector (10p) (CN5201) 3 Connector (6p) (CN101) 2 Connector (10p) (CN102) (except GX350)
qs Screw (+P3 4)
1 The wire pin that holds the harness is set up. qk Rear panel
2-6. DC FAN
1 Two screws (+BV3) 2 DC fan
Air flow
2-4
3 Screw (+BV3) and wire clamp 2 Screw (+BV3) 1 Two screws (+BV3)
8 Hard disk
5 Earth plate
8 AV-114 board
2-5
2-6
FL-178 board
2-7
MEMO
2-8E
RDR-HXD870/HXD970/HXD1070
DT-120 BOARD
MDO0-7 MDI0-7
MA0-14
MD0-7
P-CONT
12
IC203,204
LATCH
IC202
BUFFER
ED8-15
IC205
32Mbit FLASH ROM
EA2-22 ED0-15
IC101
256Mbit DDR SDRAM
27MHz
IC104
27MHz VCXO
U301
AERIAL IN OUT
IF
DTT TUNER
A0-12
D0-15
EA1-15
SDA SCL
X300 20MHz
3 13 TDXA RDXA
RD-065 BOARD
D101-104 RECT
SDA SCL
SDA SCL
IC313 IC311
AGC
IF
XCOFDM_RESET
IC201
CI CONTROLLER
EA16-22
SWITCHING REGULATOR
AC IN
FU101
ED0-15
ED0-15 EA1-22
OFDM DEMODULATOR
TS1_0-7
IC106
EMMA
STREAM_0-7
IC321
BUFFER
STREAM_0-7
IC5701
SPDIF SEL
SPDIF SPDIFO_LL
CI_TPS_0-7
3 VCLK 10
SDA SCL XCOFDM_RESET
IC200
EEPROM
SI, SCLK W2EN+,W2EN-, W3EN+,W3EN-, W1EN+,W1EN-, OSCEN+,OSCEN5 DVD OPTICAL PICK-UP BLOCK
27MHz
IC110
XRESET
IC322
IC4703
BUFFER
SPDIF
X1001 24.576MHz
LD DRIVER
AV-114 BOARD
41
R,G,B R
B, G R/C
IC1002
SDRAM
D0-15
IC4701
BUFFER
STREAM_0-7 VCLK SDA_VDEC SCL_VDEC XRESET STREAM_0-7 VCLK VIOD0-VIOD7 FMO+, FMO-
A0-10
R,G,B
JA501(2/2) LINE 3/DECODER
R,G,B
C B,G R/C Y
7 Y
IC1001
VIDEO DECODER
IC1001
AV ENC/DEC
RF+,RFA, B, C, D, S1, S2, S3, S4 PHOTO DETECTOR
IC4702
BUFFER
SDA_VDEC SCL_VDEC FAN
IC403 IC401
TU_V
XRESET
SELECTOR
Y,C V PY,PB,PR YP,CR,,CB Y,C
IC406
AVLTH SW
20
TU_L TU_R
FAN DRIVE
FAN-
4 XRESET
SDA SCL
YP,CR,,CB Y,C
TDRV R,G,B FDRV F+,FT+,TTRACKING COIL FOCUS COIL
IC402
BUFFER
L,R Y,C V L,R L,R L,R
IC3101
AUDIO ADC
U,V,W
L,R
L,R
L,R
IC3201
AUDIO DAC
AOD0 5 FG
IC501
TRACKING COIL DRIVE FOCUS COIL DRIVE SPINDLE MOTOR DRIVE SLED MOTOR DRIVE LOADING MOTOR DRIVE
HU+,HUHV+,HVHW+,HW-
M
SPINDLE MOTOR
H M M
SLED MOTOR LOADING MOTOR
XRST1
IC104
DDC SW
SDA SCL SDA SCL
IC3203
AUDIO LPF
X101 16.9344MHz LD X1001 24.576MHz XRESET SL1,SL2
ST1+,ST1-, ST2+,ST2-
FUNCTION SW
AEP,UK only
JA751 G LINK
LDO+,LDO-
2
P-CONT FANCTL
MRST
N-LINK
IC3702
OPEN CLOSE
OPEN CLOSE
IC101
IT CONTROLLER
6 Y C V
S VIDEO JA401
4 2
V+1R5_IN
U601
AERIAL IN OUT
X601 18.432MHz
UHF/VHF TUNER
IC103
SDA SCL SIF
IC101 VDD
IC3707
RESET L R
X102 32.768KHz
AUDIO R
IC601
EURO MSP
TU_L TU_R
IC3701
13
DDATA0-31
AT0DAT10-15
AT0DAT10-15
CN3801
IDE I/F
IC102
MSPSTAT
13
V+5V
X1002 27MHz
AGC
PY PB PR
KEY1-3
EV+5.8V
IC5204
5V REG
DADRS0-12
IC1201 IC1221
512Mbit x2 DDR SDRAM
XRESET
X5602 25MHz
IC201 IC5202
5V SW
MD0-15
17
IC5602
AT1DAT10-15
64Mbit SDRAM
X5101 24.576MHz
MA0-11 HDATA0-15
SATA BRIDGE
13
TXP,TXN RXP,RXN
8
HADRS1-22
IC1102
64Mbit FLASH ROM
XRESET
HDD UNIT
CN3802
J201
FL-178 BOARD
Y C V
S201,203,204, S207-213 FUNCTION SWITCH
KEY1-3 KEY1,2
IC5103
S101 POWER S102 ONE TOUCH DUB
3
PHY D0-7 AT1DAT10-15 AT1DAT10-15
2
IDE HDD
DV PHY
IC101
REMOTE COMMANDER RECEIVER
X5201 48MHz XTAL OSC
IR
13
TXD,RXD XRESET
13
L R
D212,214 HDD,DVD SEG1-16 GRD1-12 CN104
IC201
FL DRIVE
USB ATYPE
IC5801 IC5802
15
SDA SCL
JA5801
CN105 ND201 FLUORESCENT DISPLAY F1,F2 VEE Q201,202 T201 DC/AC CONVERTER
USB BTYPE
IC5203
CEC, HPD
V+12V
CN103
FR-274 BOARD
DV IN
TPAP,TPAN TPBP,TPBN
Note1: The HDMI block is highly confidential, and prohibited from releasing to public. Note2: The components identified by mark 9 contain confidential information. Strictly follow the instructions whenever the components are repaired and/or replaced.
3-1
3-2
RDR-HXD870/HXD970/HXD1070
AV-114 BOARD
U601
UHF/VHF TUNER Q601 TU_VIN BUFFER
Q509 BUFFER Q510 BUFFER Q511 BUFFER RTOMAIN Q411 GTOMAIN Q408 BUFFER D420 C/R_IN RCSEL1 8 CN302 Q410 Q604 DVD C OUT TU_LIN 18 BS IN Q605 87 A TUNER IN(L) TU_RIN 86 A TUNER IN(R) Y2 OUT C2 OUT MSPSTAT V2 OUT 32 VIDEO LINE2 OUT 36 34 S VIDEO 26 13 12 8 BUFFER 59 Q413 BUFFER RCSEL2 JA401 Y_IN G_IN C/R_IN 2 BTOMAIN 6 B_IN G_IN 4
TO DT-120 BOARD (CN103(1/2))
B_IN
AERIAL IN
VIDEO OUT
IC401 (3/5)
VIDEO/AUDIO SELECTOR
IC601 (5/5)
EURO MSP Q606 SIF OUT AMP X601 18.432MHz 2 AIN1+ 5 XIN DACMR 6 XOUT 22 RESETQ SDA SCL DC01 XRST1 Q602 AGC OUT SDA SCL BUFFER AGC DACML 27 BUFFER
AERIAL OUT
IC101 (1/5)
IT CONTROLLER
AUDIO L Q406
AEP,UK
Q751,752 AUDIO R JA751 G LINK
2Y 2C
4 1 2
Y2 IN C2 IN
AMUTE1 XAMUTE2
IC103 (1/5)
IC101 VDD DET OUT 1 43 CAPACITOR
BLAIR
45
SW
SDET2
TO/FROM FR-274 BOARD (CN202)
SDET2 2VIN
2V
14 VIDEO L2 IN
Pb(Cb) OUT 38
CB
X101 15MHz
Pr(Cr) OUT 39
CR V+5V
IC102 (1/5)
POWER FAIL DET 2 IN OUT 1
2R 10
L2_RIN
ACDET
51 52 53 55 57 61 4 2 6 1 RCSEL2
2 4 6 8 10 12
YP_OUT CR_OUT CB_OUT Y_OUT C_OUT Y_IN 10 TX2 X102 32.768kHz 9 TX1 CN302(2/2) DTBON ANT5V_SW DET_ANT 85 86 87 CN105 10 11 12 DT_TUON ANT5V_SW DET_ANT
TO DT-120 BOARD (CN103(2/2))
41 36 32 28 40 37 31 29 27 23 24
22
V/Y IN R/C IN G IN B IN/C OUT V/Y OUT BLANKING_IN N-LINK FUNCTION SW IN L IN R IN L OUT R OUT Q507 2 4 1 BLANK FUNC_IN
AUS only
18 16 14 B_IN G_IN C/R_IN
TO/FROM RD-065 BOARD (CN2301(1/2))
SDET2 XAMUTE2 RCSEL1 RCSEL2 P_SAVE CSYNCIN BLANK FUNC_ON SQU FUNC_IN AVLOUT Q102 BUFFER Q108
24 33 34 35 46 67 72 41 42 22 26 48 70 71 20
SDET2 XAMUTE2 RCSEL1 RCSEL2 P_SAVE CSYNCIN BLANK FUNC_ON SQUEEZE FUNC AVLOUT AVLTH AVLIN MSPSTAT AGC
FLON FLDATA FLCLK FLSTB LED_HDD2 LED_A_TV LED_D_TV LED_DIVX LED_PLTV KEY1 KEY2 KEY3 IR
63 49 51 50 97 96 95 94 93 17 18 19 7
FLPON FLDATA FLCLK FLSTB LED_HDD2 LED_A_TV LED_D_TV LED_DIVX LED_PLTV KEY1 KEY2 KEY3 IR
1 6 7 8 10 11 12 13 14 15 16 17 2
TO/FROM FR-274 BOARD (CN203)
90 A L3 IN(L) 89 A L3 IN(R) 72 A AV2/OUT(L) 71 A AV2/OUT(R) F A DVD (L) F A DVD (R) TO DVD (L) 77 76 80
IC403 (3/5)
SELECTOR 20 22 3 2 L_OUT R_OUT
22
IC406 (4/5)
AVLTH SW AVLTH
+ _
26
L_IN
TO DVD (R) AV1_V/Y_IN AV1_V/Y_OUT R/COUT GOUT BOUT RGBOUT Q402 BUFFER AV1_L_IN AV1_R_IN AV1_L_OUT AV1_R_OUT 54 RGB M OUT 16 VIDEO L1 IN 30 Y1 OUT 45 Pr(Cr)/RorC OUT 46 PY(Y)G OUT 44 Pb(Cb)/B OUT SYNC V C&S C3 IN
79
5 6
20
+ _
7 CN101 (1/2)
24
R_IN
IC402 (3/5)
BUFFER Q403 BUFFER Q110-112 EQ TEXTVIN
CN101 (2/2) P_CONT2 MRST XRST DAM_TO_T 57 65 29 99 6 98 79 37 73 28 29 30 31 32 33 34 35 39 40 36 38 37 23 1 P_CONT2 MRST XRST1 DAM_TO_T HSM_TO_T DAT_TO_M ASCK HST_TO_M DDC_SW1 HPD DSDA DSCL CEC AMUTE1 X525P
TO/FROM RD-065 BOARD (CN2301(2/2))
16 BLANKING_OUT 10 N-LINK 8 6 2 3 1
1
FUNCTION_SW_OUT L_IN R_IN L_OUT R_OUT Q506 Q508 SAMUTE SAMUTE 94 A L1 IN(L) 93 A L1 IN(R) 74 A AV1/OUT(L) 73 A AV1/OUT(R) SDA SCL 42 43
81 CVBSIN
HSM_TO_T DAT_TO_M
IC104 (1/5)
DDC SW 14 12 13 11 9 10
59 EPGEQ
27 28 69 38 Q103-105
5 7 6 1 SAMUTE
47 XSCMUTE SAMUTE CONTROL AMUTE1 58 MUTECTL TXD1 RXD1 V+5R8E Q101 RESET 8 RESET DBGP0 DBGP1 DBGP2 AMUTE1 XRST1 TXD1 75 76 92 91 90 RXD1 RESET DBGP0 DBGP1 DBGP2 3 4 6 7 8 9
CN103 FOR CHECK
Q501,502 FUNCTION SW
FUNC_ON SQU
3-3
3-4
RDR-HXD870/HXD970/HXD1070
DT-120 BOARD
AEP1,AEP3,UK,AUS model I2C_SDA_DTBR I2C_SCL_DTBR XCOFDM_RESET 105 PPORT20 SDA SCL 30 31 117 118 SDA0 SCL0
IC106
EMMA
IC201
U301
DTT TUNER IF OUT 4 BALUN IF OUT 3 2 6 1 T300 F319 SAW FILTER 4 5 2 3
X300 20MHz 56 57 2
CI CONTROLLER XCOFDM_RESET
X100 27MHz
(1/5)
1 XTB 8 XT
IC104
27MHz VCXO
CO VC
5 3
(2/5)
40 | 47 MDI0 | MDI7 MDO0 | MDO7 53 | 60
IC321
BUFFER PPORT30 | PPORT35, PPORT38, PPORT39 OE 19 119-124, 127,128 STREAM0-7 9 | 2 11 | 8 18
(1/5)
CN102 STREAM0-7 VDO0-7 21 | 14
(1/5)
CI_TPS_0-7 5-10, 14,15 PPORT4 | PPORT11 8
IC311
AGC
7 6
39 38
IC313
OFDM DEMODULATOR
AERIAL IN
(3/5)
4
25 | 32
TS1_0-7
(3/5)
63 54
BT(+32V)
V+32V VA+5V
Q305
17 21 18
50 49 48
63 62 61
1 4 2
IC322
2 4
(1/5)
1
AERIAL OUT
B1(+5V)
IC110 (1/5)
CLK CI_27MHZ 35
4 2
VCLK
VCLK
12
Q312
TO/FROM RD-065 BOARD (CN4701)
SDA SCL
SDA SCL
33 34
16 15
I2C_SDA_DTBR I2C_SCL_DTBR
ADO
B2(+5V) ADRS
72 70 73 TDXA RDXA
24 25 23
DQ0 | DQ15
DQ0-15
IC312
5V REG
IC101
AEP2 model 47-50, 53-56
5
A0 | A12
RXD1B TXD1B
145 146
6 7 3 4 1 27 9
DADRS0-12
(3/5)
V+5.8E 1 VIN VOUT CONT 3
94,96, MDIA0 99,103, | 107,112, MDIA7 114,116 110 92 105 MDI8 MDI10 MDI9
(1/5)
IC309
5V SW
20 46 19
(3/5)
5 1 FLAG 3 13
TO/FROM AV-114 BOARD (CN302 (2/2))
64-66, 37-41
MDO0-7 MCLKO MOSTRT MOVAL 3 CE1# OE# WE# CE2# IORD# IOWR# RESET REG# CD2# 9
1,3, MDOA0 5,74, | 76,78, MDOA7 80,84 118 127 125 MDO8 MDO9 MDO10 CS MAIT/ACK A22 RESET INT RD/DIR WR/STR 18 15 26 34 14 17 16
BA0, BA1 CK, /CK /WE /CAS /RAS /CS CKE LDM, UDM LDQS, UDQS
13
ATX RSTSWB
71 143
SPDIF XRESET
SPDIF XRESET
12 11
57 63 62
EC9 EC10 LLA22 CI_RESET 4 INT_CI EC8 EC6 2 XRESET 12 RESET INT_CI 4
STREAM0-7 VCLK
Q306,307,309,310
PROTECT DET
SDA_VDEC
72 71 74
SCL_VDEC XRESET
CN201
CI SLOT
7 9 15 42 44 45 58 61 67 16 36 59
MDC1 MDC3 MDC6 MDC2 MDC4 MDC5 MDC8 MDC10 MDC11 MDC7 MDC0 MDC9
IC205
66 67 68 69 A15-21 19-25 32Mbit FLASH ROM
(2/5)
DQ0-15 29,31,33,35, 38,40,42,44, 30,32,34,36, 39,41,43,45
26 28 11
64 62 63
IC1001
VIDEO DECODER
(5/5)
ED0-15
EA16-22
EA2-22
IC202 (2/5)
BUFFER D0-7 30-32, 2-6 MD0-7 2 | 9 8 OE 19 18 | 11 1
SDRDQ0-15
8 DIR
ED8-15
SDRA0-10
21-24, 27-32, 19
A0 | A9 BA
IC1002
SDRAM
OE 1 D0 3,4,7, | 8,13,14, D7 17,18 LE 11 EA1-15 EA1-22 34-41, 45-52, 55-61 RADD0 | RADD21 SDRABP SDRWE SDRCAS SDRRAS SDRCS SDRCLK SDRCKE 4 29 28 22 20 25 21 20 15 16 17 18 35 34 A10/AP XWE XCAS XRAS XCS CLK CKE
(5/5)
IC208 (2/5)
5V SW
6 7 3 1 2
IC203,204 (2/5)
LATCH VCC VS1# Q1004,1008
19 B_IN LPF
CI+5V Q203 Q202 XCI_VCC_5V Q201 CI_VS1 113 104 PPORT26 PPORT19
158 ASCI XO 164 ABI XI 55 54 X1001 24.576MHz
17,51 43
Q1003,1007
FROM AV-114 BOARD (CN302 (1/2))
21
160
AGI
Q1001,1005
LPF 172 ARI
17
Q1002,1006
LPF 148 AVI
3-5
3-6
RDR-HXD870/HXD970/HXD1070
RD-065 BOARD
IC1001 (2/7,4/7 to 7/7 )
AV ENC/DEC DVD OPTICAL PICK-UP BLOCK W2EN+. W2EN2 W3EN+, W3EN2 W1EN+, W1EN2 OSCEN+, OSCENLDDEN W3SET W2SET W1SET APCV FMO+, FMODVD/CD HFGAIN OSCNT RF+, RFA, B, C, D S1, S2, S3, S4 4 SW1 SW2 TEMP LCDS 2 4 2 2 27, 28 29, 30 31, 32 33, 34 35 36 37 38 39 17, 18 20 21 24 9, 7 14, 11, 12, 13 3, 4, 5, 2 1 15 40 44 SEN M3,M4,M1,M2 PHOTO DETECTOR RSET LASER FRONT MONITOR LD DRIVER
CN4701 8 | 15 STREAM0-7 9 | 2
IC4701 (2/7)
8 8 12 | 18 VIOD0-7
AF24,AE24, AE21,AD24, VIOD0 | AF23,AD23, AC24,AC22 VIOD7
AH2, AH1 AJ4, AJ3 AH4, AH3 AH5, AJ5 AE6 AE11 AF11 AE9 AF8 AGP, AG8 AG6 AG1 AF6
AT0DATA0-15
V14,U11,U12,W15, V11,T12,P13,R15, R13,V10,P15,U13, R14,U15,W13,T14 W14 U10 U14 W12 W11 T15 P14 R12 V13 T13 V15 V12 B3, A3, C1, B1, C2, B2, A2, C3, D5, F3, J1, F2, J2, A5, B9, C6, C9
VCLKI 17
1 2
IC4702
4
(2/7)
AB20 VIOCLK
AT0ADR0-2 AT0CS0 AT0CS1 AT0DMARQ AT0DIOW AT0DIOR AT0RESET AT0IORDY AT0DMACK AT0INTRQ 3 3
AT0DA0 | AT0DA2 AT0CS0B AT0CS1B AT0DMARQ AT0DIOWB AT0DIORB AT0RESETB AT0IORDY AT0DMACKB AT0INTRQ DBA0, DBA1, DCLKO, DCLKNO, DWEB, DCASB, DRASB, DCS0B, DCKE, DDQM0, DDQM2, DDQS0, DDQS2, DDQM1, DDQM3, DDQS1, DDQS3
AT1ADR0-2 AT1CS0 AT1CS1 AT1DMARQ AT1DIOW AT1DIOR AT1RESET AT1IORDY AT1DMACK AT1INTRQ 3
DA0-2 CS0# CS1# DMRQ DIOW# DIOR# RESET# IORDY DMACK# INTRQ
IC4703 (2/7)
TO/FROM DT-120 BOARD (CN102)
5 4 6
5 9 2
6 8 3
23 22 26 25 28 2 20
TXI RXI SDA_VDEC SCL_VDEC AT/XDT SPDIF_LL XRESET CN2301 Y_IN Q3301-3302
AUS only
AF21 AF22 L19 M19 T19 C18 D17
PDIAG# DASP#
E24
G24 D23 F23
AYI
ACI ABI ARI VREFIO VAG VAR VAB VAY VAC TDRV FDRV AH20 AH21 4 ACTIN1 5 ACTIN2 TRACKING COIL DRIVE FOCUS COIL DRIVE ACO1+ 54 ACO1- 53 ACO2+ 52 ACO2- 51 PA1 AF10 D101 AJ6 SI SCLK VPPD XRESET V+5L V+3A T+ TF+ FSDIO SCLK VREFPD RESET VA5V VD3V TR TD FR FD CN101 FOCUS COIL TRACKING COIL
(IC1201) (IC1221)
DBA0, DBA1 DCLKO, DCLKNO DWE DCAS DRAS DCS0B DCKE DDM0, DDM2 DDQS0, DDQS2 DDM1, DDM3 DDQS1, DDQS3
IC1201,1221 (4/7)
512Mbit X 2 DDR SDRAM
17
AT1D00 | AT1D015
AT1DATA0-15
DD0 | DD5 DA0 | DA2 CS0n CS1n DMARQ DIOWn DIORn RESETn IORDY DMACKn INTRQ
UAI UAO
HDD UNIT
45 46 10 42 6, 16 41 48 47 50 49
BA0, BA1 DQ0 CK, /CK | /WE DQ15 /CAS /RAS CS CKE A0 LDM, HDM LDQS, UDQS | A12
AT1DA0 | AT1DA2 AT1CS0B AT1CS1B AT1DMARQ AT1DIOWB AT1DIORB AT1RESETB AT1IORDY AT1DMACKB AT1INTRQ
DADRS0-12
DADD00 | DADD12
AT1ADR0-2 3 AT1CS0 AT1CS1 AT1DMARQ AT1DIOW AT1DIOR AT1RESET 6 AT1IORDY AT1DMACK AT1INTRQ 3 TXD2_BRIDGE RXD2_BRIDGE
USB_DN0 USB_DP0 USB_D_CONEECT USB_D_DN0 USB_D_DP0 USB_D_VBUS X5201 USB_CLKI USB_H_PPON0 USB_H_OCI0 48MHz XTAL OSC
IC5602
SATA BRIDGE
(5/7)
XTALI 22 XTALO 23 PORn 17
X5502 25MHz
BUFFER
XRESET
Q2504 BUFFER
IC201
64Mbit SDRAM LDQM UDQM MBA WEZ CASZ RASZ MCLK MCKE
(4/7)
Q2502 BUFFER
IC5203 (6/7)
4 1 2
15
TO/FROM AV-114 BOARD (CN101(1/2))
LCHIN RCHIN
2 1
AINL AINR
17
IC3101
AUDIO ADC
9 10 11 12 13
REF16
AF9
42 VC
IC501 (7/7)
U 11 V 13 W 16 4 3 2 V+5M HU+ 20 SPINDLE MOTOR DRIVE HU- 21 HV+ 22 HV- 23 HW+ 24 12 11 10 9 8 7 6 5
SPINDLE MOTOR
(3/7)
M
10 1 3 4 5 8 9 7 2 PW D5(AG) D1(SL) D0(MA) TX_FE RX_FE XRESET A9(ATA) V+3D
XDMUTE1 XDMUTE2
15 39 20 16 17 18 38 37
DQ0 | DQ15
MD0-15
MD0 | MD15
4 A0 | A11 23-26, 29-34, 22,35 MA0-11 MD2 MD5 MD1 MD0 REMO REMI AE3,AD3,AF3,AE5, AE4,AD2,AD1,AC5, AD4,AC1,AC3 MA0 | MA11
IC5202 (6/7)
5V SW 4 5V REG 5 4 5 FLG 3
USB_H_PPON0 USB_H_OCI0
EV+5.8V
IC3203 (3/7)
AUDIO LPF 21 19 18
1
IC3201
AUDIO DAC 7 VOUTL VOUTR DATA BCKIN LRCKIN MCLK 11 ZEROR MD MC ML 2 1 3 16 13 14 15
(3/7)
AOD0 AOBCK AOLRCK DACCLKO SMDOUT SMCKOUT NSCS AMUTE
E18 C19 D20 E21 L4 K5 L3 F17 P19 L5 N19 AB19 AOD0 AOBCK AOLRCK AIOMCK1 SMDOUT SMCKOUT GPIO62 GPIO54 GPIO04 SMDIN
FG
IC5204 (6/7)
AF7 AG5 V24 W22 AA24 PB7 PB6 FCSB0 FOEB FWEB
AMUTE1
D3201
10 9 8 7 6
TO/FROM AV-114 BOARD (CN101(2/2))
DAM_TO_T HSM_TO_T DAT_TO_M ASCK HST_TO_M X525P DSDA DSCL DDC_SW1 HDP CEC P_CONT2 MRST XRST1 TU_DSDA TU_DSCL DDC_SW1 TU_HPD TU_CEC 3 5 1 7
40 5 3 2 1 4 13 12 11
IC3702
1 2
Q5701 JA5701
DIGITAL OUT
BUFFER
IC3707
RESET
(3/7)
+ _
R_OUT
+ _
L_OUT
2 3 6 5
IC1102
64Mbit FLASH ROM HCS0 HDOE HWS0
(4/7)
SDRV1 SDRV2
AJ21 AJ20
SL1 SL2
SLO1+ 40 29 SL1IN 30 SL2IN SLED MOTOR DRIVE SLO1- 39 SLO2+ 38 SLO2- 37 LOADING MOTOR DRIVE
PHY_D0 | PHY_D7
E13,D13,E12, D12,E11,D11, E10,D10 CTL0 CTL1 E14 D14 D15 E15 D16 E16 F20
8,9,11, D0 12,14,15, | 17,18 D7 5 6 2 63 59 58 55 CTL0 CTL1 SCLK LREQ LPS LKON RESETB
1 2 5 6 CN5101
M M
SLED MOTOR
IC5103
DV PHY
26 28 11
DAOUT
AJ19
LD
46 LDIN
LDO+ LDO-
2 1
CE OE WE
DQ0 | DQ15
HDATA0-15
(6/7)
X1
22 23 X5101 24.576MHz
AH6 AJ7
XRESET
12
RESET
A0 | A21
HADRS1-22
XRESET
L5001
IC3701
(3/7)
X101 16.9344MHz AE1 AF1 X1001 24.576MHz M24 CLK24IN CLK24OUT RSTSWB CLK27AIN CLK27AOUT ATX XA1 XA2
SI SCLK CSOZ
5 2 6 1
SI SO SCK CE
IC200
EEPROM
HADRS13 JTSEL DINTEN EJSNGEN 3 TDI TCK TDO TMS TRST DINT RST
V+3D
HADRS5-7,13
(4/7)
TXD
3 9 13
1 2 5 7
CN1402 FOR CHECK CN1401 FOR CHECK
IC5801
F21 J19 G19 G20 H20 H19 Q102 SW AJ2 OFPULSE
V+5VHD Q5810 LEVEL SHIFT
L5002
2 Q1811
6
V+5D
RXD XRESET
D3712
12 6 10 8 14 2 4 1
(6/7)
L5003
(3/7)
4 XRESET X1002 27MHz
K23 J24
FSC BPF
IC3701 (3/7)
Q1801
K20 H21
HCL BPF
IC5701
SPDIF SELECT
5 13
AJ14 FCEFM1
(3/7)
5
IC5802 (6/7)
Note1: The HDMI block is highly confidential, and prohibited from releasing to public. Note2: The components identified by mark 9 contain confidential information. Strictly follow the instructions whenever the components are repaired and/or replaced.
3-7
3-8
RDR-HXD870/HXD970/HXD1070
FR-274 BOARD
Q206 LED2 2 LED DRIVE Q205 LED3 3 LED DRIVE D212 HDD D214 DVD
IC201
FL DRIVER
SG1 | SG16
12 11 10
14 | 29 42 | 31 30
FLUORESCENT DISPLAY
10 1 7 F2
4 5 8 F1 6 9
FL-178 BOARD
3 2 1
KEY1
4 5 2 1
S101
POWER
KEY2
S102
16
IR CN106
IC101
REMOTE CONTROL RECEIVER
1
7
2 3 4
CN104
S203,204,207 REC STOP, INPUT SELECT, REC S208-211 CH+, CH-, PLAY, STOP
TO/FROM RD-065 BOARD (CN5201)
9 3 1 6 5
USB ATYPE
CN105
2 3
1 4
USB BTYPE
FL102 2
TO/FROM RD-065 BOARD (CN5101)
4 3 2 1
CN103
1 5 6
DV IN
J201
S VIDEO
3 4
2Y 2C
4 1 2
TO/FROM AV-114 BOARD (CN106)
5 LINE2 IN VIDEO 7
SDET2 2V
AUDIO R
11
2R 10 CN202
3-9
3-10
RDR-HXD870/HXD970/HXD1070
SW+12V(H) SW+5V(H)
T101 SWITCHING TRANSFORMER
SW+1.5V(T)
D401 Q401,402 SW+12V D402 P401 EV+12V P201
FU101 T3.15A/250V
D101-104
HDD UNIT
SPINDLE MOTOR
VD3V
D109
L201
RD-065 BOARD
P204
5V REG
8 5
Q101 SWITCHING
TRACKING COIL DRIVE FOCUS COIL DRIVE SPINDLE MOTOR DRIVE SLED MOTOR DRIVE LOADING MOTOR DRIVE
+ 2 _
IC3703
RESET
IC101
SWITCHING REGULATOR
2 4
(7/7)
IC202
SHUNT REG
(3/7)
3 8 2
IC1302
VREF_D
(2/7)
1 3,4 6,7 9 11 13
1 3,4 6,7 9 11 13
+ _
VREF_D
6 D105
D501
L501
P501
Q501
3.3V REG
D502
SW+3.3V
14 1
DT-120 BOARD
IC302 (5/5)
3.3V REG 7 VIN CONT 5 P_CONT2 VO 1 V+3.3D
IC501
SHUNT REG
D601
L601 Q601 SW+1.5V
IC4511 (1/7)
3V REG EV5.8V
1.5V REG
4 VIN
VOUT 5
V+3V
V+3V
IC1002
SDRAM
D603
PC101 PHOTO COUPLER VR201 5.8V ADJ
V+3D
V+2R5 V+1R0 V+3A
IC1001
AV ENC/DEC
(2/7,4/7 to 7/7)
USB_H_PPON0 N2 M3 USB_H_OCI0
IC1201 IC1221
512Mbit X 2 DDR SDRAM
(5/5)
V+3.3D V+1.5VDEC V+3.3A
D604
IC601
SHUNT REG
V+3D
IC4521 (1/7)
2.5V REG 4 VIN VOUT 5 V+2R5 ON/OFF 1 P_CONT2
(5/5)
IC320
1.5V REG 7 VIN CONT 5 P_CONT2 VO 1
IC1001
VIDEO DECODER
IC201
SHUNT REG
(4/7)
R223
V+3D
10
(5/5)
11,12 SW+1.5V EV+12.1V V+5.8E SW+3.3V P-CONT
CN103 V+1R5_IN
IC4531 (1/7)
1V REG 8 VIN VOUT 1 CONT 5 P_CONT2 V+1R0
IC201
64Mbit SDRAM
IC200
EEPROM
IC1102
64Mbit FLASH ROM
(5/5) IC319
5V REG 1 VIN VOUT 5 +5V D+2.5V ON/OFF 3 P_CONT2 V+5.8E V+3.3SW
IC300 (4/5)
2.5V REG SW+3.3V 5 VOUT VIN 4
(4/7)
V+3D
(4/7)
(4/7)
1 28
CN101
Q1002-1008 LPF
F300
ON/OFF 1
AV-114 BOARD
16
CN302 EV+12.1V
D103
V+5V
13
CN2301
P_CONT2
IC4541 (1/7)
3V REG EV5.8V 7 VIN CONT 5 VO 1 V+3A
IC4701-4703
BUFFER
IC3701
BUFFER
IC3702
AND GATE
CN103 EV+12.1V
V+5.8E
V+3.3SW
3,5 2 10
20,18 21 13
(2/7)
IC3201
AUDIO DAC
(3/7)
IC3202
AUDIO LPF
(3/7)
IC3101
AUDIO ADC
P-CONT P-CONT2
DT+3.3V V+3.3A
C118 BACK-UP
IC101
IT CONTROLLER
P_CONT2
IC4552 (1/7)
5V REG EV5.8V 4 VIN VOUT 5 V+5L ON/OFF 1 P_CONT2
F302
FAN15 23
IC104
27MHz VCXO
V+3.3D
D+2.5V
F301
FANCTL
TUON SWVION9V
(1/5)
(3/7)
V+3D
L4551 V+5AO V+5A IN V+5D
(3/7)
(3/7)
IC106
EMMA
(1/5)
IC110
INVERTER
A+3.3V D+3.3V
(1/5)
IC101
256Mbit DDR SDRAM
(3/5) IC307
F314
REG V+3.3SW 4 VIN1 VO1 5 VO2 6 3 VIN2 PS1 PS2 3 3
V+5BB
IC403
RCSEL
IC313
OFDM DEMODULATOR
RFTHRU
Q305,306
(3/5)
R307 R308 V+5VD V+5VI
IC4561 (1/7)
5V REG EV5.8V 1 VIN VOUT 5 CONT 3 V+5HD
5
V+12VA
(3/5)
IC311
AGC
SWVION5V
Q303,304
IC401
VIDEO/AUDIO SELECTOR
63
18
JA5801
(1/5)
IC321
BUFFER
VREF
D+2.5V
V+5TU
VA+5V
(1/5)
D+3.3V
DT+3.3V
TUON V+9V
(3/5)
Q307,308 9V REG
IC102
POWER FAIL DET
V+3D
IC4562 (1/7)
3V REG EV5.8V 1 VIN VOUT 5 CONT 3 V+3HD
(1/5)
IC322
SW
IC318
VREF 8
(1/5)
+ 3 _ 2
D+2.5V
IC304 (4/5)
5V REG V+5.8E 1 VIN VOUT 5 CONT 3 VA+5V B1(+5V)
(3/5)
IC317
U601
UHF/VHF TUNER
V+32V
(1/5)
IC103
IC101 VDD DET
SWVION9V
Q309-311 DC/DC CONV. TU_DDCON
VREF
(5/5)
IC601
EURO MSP
P-CONT2
(1/5)
V+3D
IC4571 (1/7)
1.8V REG 5 VIN VOUT 1 V+1R8 ON/OFF 4
L5601 EMI
SPDIF SELECT
V+3DS
IC5602
SATA BRIDGE
(7/7)
IC5203
AND GATE
(1/5)
DT+3.3V
IC201
CI CONTROLLER D+5V
DT+3.3V
IC312 (3/5)
5V REG V+5.8E B2(+5V) 1 VIN VOUT 5 CONT 3 DT_TUON
BT(+32V)
V+32V
14
IC205
32Mbit FLASH ROM
(2/5)
IC306 (4/5)
5V REG V+5.8E 5 VOUT VIN 4 ON/OFF 1
U301
DTT TUNER
(5/5)
IC402
BUFFER
IC104
DDC SW
(5/7)
L5101 V+12VA L5122 EMI V+3V_D V+3V_A
(1/5) (4/5)
IC150
Q4581
V+12V
IC5103
DV PHY
(2/5)
IC202
BUFFER
(3/5) (3/5)
ADRS
RIPPLE FILTER
(6/7)
IC5202 (6/7)
5V SW
IC309
5V SW 5 4 1
IC406
AVLTH SW
IC5204 (6/7)
5V REG EV5.8V 4 VIN VOUT 5 NC 3 V+3D 5V
(6/7)
4
P-CONT2
(4/5)
DT_TUON AN5V_SW
V+5USB
5 FLG 3 1
6
USB_H_OCI0
(2/5)
CI_5V
CN5201
IC208 (2/5)
5V SW
1 2 6 7
13 12
10 11
USB_H_PPON0
IC203,204
LATCH
1
V+5USB
(2/5)
Q202,203
EV+12.1V
VCC
2 1 CN203
FAN
14
V+5F D208-211 RECT Q201,202 T201 DC/AC CONVERTER ND201 F1,F2 FLUORESCENT DISPLAY VEE CN201
IC101
CN106
17,51
CN201
CI SLOT
Q203,204
15 17
IC201
FL DRIVE
AEP2 model
FR-274 BOARD
V+5F
FL-178 BOARD
CN102 CN104
USB ATYPE
Note1: The HDMI block is highly confidential, and prohibited from releasing to public. Note2: The components identified by mark 9 contain confidential information. Strictly follow the instructions whenever the components are repaired and/or replaced.
3-11
3-12E
RDR-HXD870/HXD970/HXD1070
10
A
CN201 13P
EV+5.8V(M ) GND SW+1.5V(M ) SW+1.5V(M ) GND D SW+3.3V(M ) SW+3.3V(M ) GND SW+12V GND(J) SW+5V(W ) GND(W) SW+12V(W) 1 2 3 4 5 6 7 8 9 10 11 12 13 1 2 3 4 5 6 7 7P GND HT+ FR HTFD GND TR HATD HA+ SCLK GND 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 SCLK SDI O SEN VPP RESET VD3V TEM P RSET W1SET W2SET W3SET LDDEN OSCENOSCEN+ W1ENW1EN+ W3ENW3EN+ W2ENW2EN+ VO5V VO5V OSCNT GNDO GNDO HFGAIN DVD/CD GNDA FMOFMO+ VA5V SW2 M3 M2 M1 M4 VREFPD RF+ GNDA RFVA5V S3 S2 S1 S4 SW1 47 47 TD 48 48 TR 49 49 FD 50 50 FR 4 3 2 1 4P 5V GND GND 12V
PH-080
HARNESS
B
POWER BLOCK
SWITCHING REGULATOR
CN202 12P
P_ON/OF F SW+3.3V(T ) GND SW+3.3V(T ) GND 1 2 3 4 5 6 7
RH-059
HARNESS
TUNER
1 2 3 4 5 6 7 GN D TX N GN D RX N GN D RXP TXP
8 9 10 11 12
LDDEN OSCEN-
CN2301 40P
X 525P YP_OUT 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 40 39 HPD
C N101 40P
DDC_SW 1
OSCEN+ W1ENW1EN+
CN5604 7P
FRA-006
FLEXIBLE FLAT CABLE
W3EN38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 DSCL W3EN+ CEC W2ENDSD A W2EN+ HST_TO_M VO5V ASCK VO5V DAT_TO_M OSCNT HSM_TO_T GNDO DAM_TO_T GNDO XRST1 HFGAIN MRST DVD/CD P_CONT2 GNDA GN D FMOL_IN FMO+ GN D VA5V R_IN SW2 AMUTE1 M3 R_OUT M2 GNDA M1 L_OUT M4 GN D B_IN GN D GNDA G_I N RFGN D VA5V C/R_I N S3 GN D S2 Y_I N S1 GN D S4 C_OUT SW1 GN D Y_OUT GN D CB_OUT GN D CR_OUT ST2+
C
CN4501 13P
1 2 3 EV+5.8 V GND D SW+1.53V SW+1.53V GND D SW+3.33V SW+3.33V GND D V +12V GND V+5M
CB_OUT GND Y_OUT GND C_OUT GND Y_I N GND C/R_IN GND G_I N
CN203 4P
SW+5V(H) GND GND SW+12.1V(H) 4 3 2 1
4 5 6 7 8 9 10 11
RD-065 BOARD
GND B_IN GND L_OUT GNDA R_OUT AMUTE R_IN GND L_IN
12 GND M
PR-076
HARNESS
13
V12M
AV-114 BOARD
VREFPD RF+
CN5201 10P
10 9 8 7 6 5 4 3 2 1 USBDM2 GND USBDP2 GND V+5USB USBVFB GND USBDM1 GND USBDP1
GND P_CONT2 MRST XRST1 DAM_TO_T HSM_TO_T DAT_TO_M ASCK HST_TO_M DSDA CEC
CN502 4P
4 3 2 1 4 3 2 1 ST2+ ST2ST1ST1+ ST2-
4P
CN5101 6P
CN4701 28P
DSCL DDC_SW 1 HD P
GND(RFE/XLL)
A_GN D
A_GN D
TPB P
TPB N
TPAP
TPAN
STREAM_7
STREAM_6
STREAM_5
STREAM_4
STREAM_3
STREAM_2
STREAM_1
STREAM_0
SDA_VDEC
SCL_VDEC
AT/XD T
XRESET
ALRCKI
ADATA
SPDIF 2
VCLKI
ABCKI
GN D
GN D
GN D
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
GN D
RX 1
TX 1
GND
GND
GND
GND
FVR-001
FLEXIBLE FLAT CABLE
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 1 2 3 4 5 6 7 8 9
CN601 5P
LPS2 GNDD LPS1 BLACK RED 5 4 3 2 1 5 4 3 2 1 LPS2 GNDD LPS1 BLACK RED
5P
VD07
VD04
VD06
VD02
VD01
VD05
VD03
VD00
AT/XDT
ALRCK
ADATA
SPDIF
GN D
GN D
GN D
GN D
GN D
GN D
GN D
RDXA
TDXA
GND(REF/LL)
SCL_VDE C
SDA_VDEC
XRESET
VCLK
ABCK
GN D
CN103 24P
GND C/R_I N 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1
C N302 24P
GN D
CN501 12P
VCC 12 11 10 9 8 7 6 5 4 3 2 1 12 11 10 9 8 7 6 5 4 3 2 1 VCC HU+ HU HV+ HV HW + HW HB U V W GNDD HU+
12P
CN202 12P
1 2 3 P_CONT SW+3.3V GN D SW+3.3V GN D V+5.8E V+5.8E GN D EV+12.1V GN D SW+1.5V SW+1.5V
CN104 28P
FVA-002
FLEXIBLE FLAT CABLE
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
C/R_I N GN D HU G_I N HV+ GN D HV B_IN HW + GN D HW Y_I N HB GN D U DT_TUO N V ANT5V_SW W DET_ANT GNDD P_CONT2 V +32V GN D EV+12.1V GN D EV+5.8V GN D EV+5.8V P_CONT GN D FAN-
F
PV-145
HARNESS
CN103
4 5 6 7 8 9 10 11 12
DT-120 BOARD
GND DT_TUON ANT5V_SW DET_ANT P_CONT2 V+32V GND EV+12.1V GND V+5.8E GND
DV IN
CN106 11P
CN105 17P
CN203 2P
CN105
V+12R1E
G
CN04
FAN+
FAN-
10
11
17
16
15
14
13
12
11
10
2 16 IR
RU-001
HARNESS
10 9 8 7 6 5 4 3 2 1
RV-003
HARNESS
6 5 4 3 2 1
DIGITAL TUNER
TPBP TPAP GND GND TPBN TPAN
FAR-006
FAN FLEXIBLE FLAT CABLE
10 11 1 2 3 4 5 6 1 2 3 4 5 6 7 8 9
FAR-007
FLEXIBLE FLAT CABLE
10 11 12 13 14 15 17 7 8 9
USB A TYPE
GN D USBDM 2 SDET 2
GN D
GN D
GND
2R
USBVF B
USBDP1
USBDP2
USBDM1
GND
2C
2Y
2V
2L
V+5USB
FLST B
PLT V
V +5F
GND
GND
GND
GND
CN201 5P
KEY2 KEY1 IR 1 2 3 4 5 5 KEY2 KEY1 IR GND V +5F
FLR-010
FLEXIBLE FLAT CABLE
FLDATA
CN106 5P
4 3 2 1
V+12RIE
FLCLK
FLPO N
DITV
GND
HDD2
D_TV
KEY3
KEY2
KEY1
A_TV
GND
FLPO N
FLDATA
GN D
LED_HDD2
LED_D_TV
LED_PLTV
LED_A_TV
LED_DIVX
SDET2
FLSTB
FLCLK
V +5F
KEY3
KEY2
KEY1
GND
GND
GND
GND
GND
GND
GND
2R
2C
2V
2V
2L
IR
J201
CN102 10P
CN101 6P
GND V +5F
LINE 2 IN
CN202 11P CN203 17P
FL-178 BOARD
FR-274 BOARD
4-1
4-2
RDR-HXD870/HXD970/HXD1070
WAVEFORMS
AV-114 BOARD
1 X101 7 JA402
COMPONENT PR
DT-120 BOARD
1 X100
66.6 ns
5.1 Vp-p
1.0 Vp-p
37 ns
2.2 Vp-p
2 X102
8 JA402
COMPONENT Y
2 X300
3 JA401
S-VIDEO C
9 JA501 ql
3 X1001
When indicating parts by reference number, please include the board name.
4 JA401
S-VIDEO Y
0 X601
5 JA402
VIDEO
2.0 Vp-p H
6 JA402
COMPONENT PB
1.1 Vp-p H
WAVEFORMS
AV-114/DT-120
4-3
4-4
RDR-HXD870/HXD970/HXD1070
For Schematic Diagram Refer to page 4-47 for printed wiring board.
6
Q103 UMD2N-TR SA MUTE CONTROL
JL20 8
7
Q104 UMD2N-TR SA MUTE CONTROL
JL213 R147 JL216 1k JL21 7
9
Note :
10
11
AV-114 BOARD(1/5)
IT CONTROLLER, IR
-REF.NO.: 10,000 SERIES-
B+ B+
R169 10k
D106 1SS355TE-17
The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.
5.4
2.4 0
5 2
0 4.9
2
JL209
5
C135 0.1
5.3
0 2.5
4 1
D108 DAP202uT106
BLANK
0
JL21 0 JL27 4
0.7
SAMUTE
TU_DCCON
HOTPLUG
RXD1
MSPSTAT
TXD1
CSYNCIN
AVLIN
CEC0
P_CONT2
FLPON
P_CONT
TUON
SWVION5V
SWVION9V
+5V L2_RIN L2_LIN 2VIN Y2IN C2IN R_IN L_IN R_OUT L_OUT Y_IN C_OUT Y_OUT CB_OUT CR_OUT YP_OUT TEXTVIN P_SAVE CSYNCIN SCL SDA RCSEL1 RCSEL2 BLANK XAMUTE2 AMUTE1
1
TO (3/5)
L2_RIN L2_LIN 2VIN Y2IN C2IN R_IN L_IN R_OUT L_OUT Y_IN C_OUT Y_OUT CB_OUT CR_OUT YP_OUT TEXTVIN P_SAVE CSYNCIN SCL SDA RCSEL1 RCSEL2 BLANK XAMUTE2 AMUTE1
B+
CN105 17P
FANCTL
EPGEQ
B+
HST_TO_M
RFTHRU
AMUTE1
RESE T
B+
R174 100k
KEY3 KEY2 0.1 R155 100 R154 100 R153 100 R125 100 R172 100 R171 100 R168 180 R199 100 R167 100 R160 100 0.1 0 0 KEY1 R150 0 R149 0 C 134 0.1 JL15 3 R161 0 LED_PLT V LED_DIVX LED_D_TV LED_A_TV JL177 JL179 JL181 JL183 R103 100 FLCLK LED_HDD2 R156 100 0.1
JL22 2 17 JL22 3 16 JL22 4 15 JL22 5 14 JL22 6 13 JL22 7 12 JL22 8 11 JL22 9 10 9 LED_HDD2 GND FLSTB FLCL K FLDATA GND V+5 F V+12R1E IR FLPO N LED_A_TV TO FR-274 BOARD CN203 THROUGH THE FAR-007 FFC LED_D_TV LED_DIVX LED_PLTV KEY1 KEY2 KEY3
R175 330
R165
R159
R173 100k
JL11 2
JL14 0
JL14 1
JL14 4
JL14 6
JL15 1
JL15 7
JL15 9
JL16 1
JL16 4
JL16 5
JL111
JL132
JL135
JL138
C132 C131
B+
4.9
4.9
3.1
5.0
4.9
3.6
4.8
4.9
4.9
4.9
4.8
4.9
4.9
4.9
4.8
4.9
2.7
4.9
4.9
FLSTB FLCLK
80 VDDDDA
79 HST_TO_M
78 RXD2
77 TXD2
76 RXD1
75 TXD1
74 TU_DCCON
73 HOTPLUG
72 BLANK
71 MSPSTAT
70 AVLIN
69 CEC
68 XCHECKER
67 CSYNCIN
66 NC(IN)
65 MRST
64 SWVION5V
63 FLON
62 P_CONT
61 SWVION9V
60 TUON
59 EPGEQ
58 MUTECTL
57 P_CONT2
56 GND
55 VDD2
54 FANCTL
53 NC
52 RFTHRU
51 FLCLK FLDATA
2.0
JL113
4.9
FLSTB FLDATA AVLTH XSCMUTE P_SAVE BLAIR 50
JL185 R102 100 JL186 R101 100 JL187 R148 100 JL188 R146 100 JL189 R152 JL190 0
B+
SWVION9V P_CONT P_CONT2 DET_ANT ANT5V_SW DTBON FANCTL RFTHRU TUON SWVION5V TU_DCCON
81 82
CVBSIN GND FILTSLC VDDVCO DTBON ANT5V_SW DET_ANT GND VDD3 DBGP2 DBGP1 DBGP0 LED_PLTV LED_DIVX LED_D_TV LED_A_TV LED_HDD2 DAT_TO_M DAM_TO_T
0
R176 1k C139 0.1 JL115 JL116 JL117 JL114 49
B+ B+
2.9
83 48
0 4.9
84 47
2
TO (2/5)
SWVION9V P_CONT P_CONT2 DET_ANT ANT5V_SW DTBON FANCTL RFTHRU TUON SWVION5V TU_DCCON GND
4.9 0
85 46
FLPON P_SAVE
JL23 5 1
0 0
86 45 87
0 0
88
11P
IC101
IT CONTROLLER
NC CAPACITOR SQUEEZE
44
4.9
43
L2.RIN
JL23 6 10 9
C140
0.1 JL118 JL119 JL120 JL121 JL122 JL123 JL124 JL125 JL126 JL127 JL128
0
42
IC103 BU4220G-TR
4.9
5 1
D
3
TO (4/5)
R180 100 R181 100 R182 100 R183 100 R184 100 R185 100 R186 100 R187 100 R188 330 R189 470 R200 330
DBGP 1 SAMUTE FUNC_IN FUNC_ON BLANK AVLTH AVLIN AVLOUT SQU DBGP 0 LED_PLTV LED_DIVX LED_D_TV LED_A_TV
IC101 LC87F06J2A-F58W3-E
0
FUNC_ON VDD4 GND DDCSW2 DDCSW1 NC RCSEL2 RCSEL1 XAMUTE2 NC AFT 41
2.6 JL214
OUT IN 4 GND NC CT 2
L2.LIN
JL23 7 8 7
4.9
40 39 38 37 JL197 36
B+
R205 100 R204 100 C126 R202 R203 R144 0.1 0 0 0 RCSEL2 RCSEL1 XAMUTE2 DDC_SW 2 DDC_SW 1
4.9
JL21 5
2VIN
JL23 8 6 5
C156 0.1
0 0 0 0 0 3.3
95 96 97 98 99
C157 0.1 B
Y2IN
JL23 9 4 3 JL24 0 2
0
35
4
TO (5/5)
AFT AGC SCL SDA XRST1 MSPSTAT +5V CN103 9P 9 JL10 2 DBGP1 DBGP0 RESET 8 JL10 3 7 JL10 4 6 JL10 5 5 JL10 6 RXD1 TXD1 GND V+5V 4 JL10 7 3 2 1 JL10 1
4.9
34
4.9
33 32
IC103
IC101 VDD DET
C2IN
JL24 1 1
0
100 ASCK HSM_TO_T BATTDET MODEL1 MODEL2 AVLOUT RESET SDET3 SDET2 SDET1 ACDET VDD1 XRST FUNC KEY1 KEY2 KEY3 31
JL202
R222
CN101 AFT HOTPLUG DDC_SW 1 JL24 2 40 JL24 3 39 DDC_SCL JL24 4 38 JL24 5 37 DDC_SDA JL24 6 36 HST_TO_ M JL24 7 35 ASCK JL24 8 34 ASCK JL24 9 33 HSM_TO_ T JL25 0 32 DAM_TO_ T XRST 1 GTOMAIN P_CONT2 JL25 1 31 JL25 2 30 JL25 3 29 JL25 4 28 C/R IN L_IN JL25 5 26 25 R_IN JL25 6 24 AMUTE1 R_OU T JL25 7 23 JL25 8 22 21 L_OU T JL25 9 20 19 RTOMAIN R197 JL218 L102 47uH C/R IN GTOMAIN JL26 1 16 JL22 0 15 JL26 2 14 13 Y_IN R209 3.3k C_OU T R216 750 0.5% JL26 4 10 9 TEXTVI N Y_OUT JL26 5 8 R215 680 C15 0 1 10V F R214 3.3k 7 CB_OUT JL26 6 6 5 CR_OUT JL26 7 4 CR_OU T GND YP_OUT X525P KN101 3 YP_OUT JL26 8 2 JL26 9 1 CB_OU T GND Y_OUT GND C_OUT GND JL26 3 12 11 Y_IN GND C/R_IN GND G_IN GND 0 JL26 0 18 17 B_IN GND L_OUT GND R_OUT GNDA AMUTE1 R_IN L_IN GND 27 MRST XRST1 DSDA DSCL CEC HPD
40P
DDC_SW 1
WDT
E
FOR CHECK
6 JL147 4.9
IR
DBGP2
JL150 4.9
JL152 1.7
JL155 2.5
JL160 2.4
JL162 2.4
JL170 4.9
JL172 4.9
JL174 4.9
JL175 4.5
JL176 5.0
JL180 4.9
JL182 4.9
JL184 4.9
JL206 5.0
JL205 5.0
JL204 4.9
JL133
JL136
JL139
JL166
JL168
JL178
JL207
JL203
GND
DBGP2 R193 100k DBGP1 R194 100k DBGP0 R195 100k RESET R196 100 RXD1 TXD1
GND
AGC
SDA
SCL
CF1
CF2
TX1
TX2
NC
NC
NC
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
4.9
NC
HST_TO_ M
B+
R117 1M R105 100 R109 330 R110 100 R111 100 C107 330p C113
B+
AUS only
DAT_TO_ M
R139 6.8k
R141 6.8k
IC102
B+
ACDET C106 0.1
R225 15k R123 330 R124 330 R129 330 R126 100 R127 10k
B+
B+
R143 100
C125 0.1
RTOMAIN
B+
R138 470 R137 100 R140 100 R116 0 R118 0 R107 10k R106 0 JL272 R142 100
10
TO (2/5)
JL163
4.9
5.0
JL14 8
JL143 1
5.0 0 0
JL211
P_CONT2 GND
JL21 2
1
C105 0.1
X101 15MHz
GND
IN
IC102 BD4846G-TR
OUT
NC
NC
HSM_TO_ T
FUNC_IN
AVLOUT
XRST1
RESET
SCL0
SDA0
KEY1
KEY2
KEY3
JL131
JL134 JL137
AGC
SDA0
CEC0
DDC_SW 2
DDC_SDA
DDC_SC L
SCL0
SDA
SCL
R224 100
R223 100
C110 1 B
5.0
5.0
4.4
4.9
5.0
4.4
4.9
D101 1SS355TE-17
JL129
R113 0
JL130
IC104 TC7MB3257FK(EL)
D103 1SS355TE-17
B+
R201 0
B+
D104 1SR154-400TE-25
4.9
3.6
3.6
B+
JL109
R751 1k
3.6
JL705
C120 0.1
C122 1 10V F
0
JL710 R756 1k
JA751
DDC SW
JL22 1
JL708
AEP,UK only
4-5
3 4
AEP,UK only
B+
R207 470 C149 10p 50V
2
4.9
EPGEQ
R112 10k
JL273
4.9 2.6
C152 1 10V F
4.9
R208 0
4.9
C109 0.1 R228 0
C141 1 10V F
3.2
JL28 0
D102 1SS355TE-17
15
14
13
12
11
10
3.2
1.8
JL27 8 R217 1k
JL27 1
B+
R701 220k
SIGNAL PATH
VIDEO SIGNAL CHROMA Y Y/CHROMA AUDI O SIGNAL
R221 100
5.0
C751 0.1
5.0
5.0
0
R754 150
JL71 1
L751 0uH
JL712
KN102
REC PB
G-LINK
C 121 1
IC104
4-6
IT CONTROLLER, IR
AV-114 (1/5)
RDR-HXD870/HXD970/HXD1070
For Schematic Diagram Refer to page 4-47 for printed wiring board.
AV-114 BOARD(2/5)
POWER/FAN CONT.
-REF.NO.: 10,000 SERIESAUS only
Note :
GTOMAIN BTOMAIN C/R_IN
10
TO (1/5)
A
5
TO (4/5)
The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.
BTOMAIN GTOMAIN V +5V I GND JL30 5 V +12R1 C302 0.1 25V F R302 0
B+
CN302 JL322 24 23 JL329 22 21 20 JL31 9 R303 0 JL306 19 18 17 16 JL330 GN D FANGN D P_CONT EV+5.8V GN D EV+5.8V GN D EV+12.1V GN D V +32V P_CONT2 THROUGH THE DET_ANT ANT5V_SW DT_TUON GN D Y_IN GN D B_IN GN D G_IN GN D C/R_I N GN D C/R_I N Y_IN FVA-002 FFC TO DT-120 BOARD CN103 24P
B+
P_CONT V +5R8E
R301 0
JL323
B+
B+
D301 UDZS-TE17-15B
B+
V+12R1E
B+
15 14
P_CONT2 JL331 DET_ANT JL332 ANT5V_SW JL333 DTBON JL31 4 R218 0 C205 22 25V L201 1mH JL325
D201 1SS355TE-17
C204 100 16V C202 0.1 25V F
5.4 0.3
2 1
B+
JL34 5
GND V+5V I
6
TO (3/5)
B+
Q302 2SC4154TP-1EF
JL34 4
V +5V I
B+ B+
5.7 5.0
V+5V O V+9V
R308 0
B+
JL31 2
JL34 3
R307 0
2
TO (1/5)
V+5BB
JL315
5
5.6 5.6
JL336
B+
JL34 1
5.6
4 1
JL30 8
JL339 R306 33 C306 0.1 25V F C307 100 16V C308 100 16V JL334
0
6
5.6
Q306 2SC2411K-T-146-CQ
+5V REG
Q301 UMD2N-TR
+5V REG
5.7
4 1
5.6
3 6
4.9
JL301 RFTHRU
0 4.8
2
Q305 UMD2N-TR
+5V REG
B+
SWVION5 V R318 0
Q304 2SD2153T100V
+5V REG
JL338
JL313
5.6
JL316
5.0
B+
12.0
JL34 6 V+5TU
R305 33
5.6 5.6
4 1 3
JL337 JL34 0
9.0
B+
JL34 7
5.6 0
6
JL309
0
C311 220 16V C312 100 16V C329 0.1 25V F JL320 R309 1.5k
9.6
5
Q308 2SC2411K-T-146-CQ
+9V REG
7
TO (5/5)
4.9
9.7
4
9.6
3 6
D304 1SS355TE-17
JL335
1
TUON
2
B+
4.8
SWVION9 V
B+
L305 0uH C326 10 50V C328 0.1 50V F
L304 330uH
B+
R310 4.7k JL304
D303 1SS355TE-17
C323 1 50V F R314 22k R313 180k JL32 1
B+
V +32V
JL303
6.2
6.2
5
JL324
5.7 0.6
6 3
SIGNAL PATH
R316 22k 0.5% GND
0.3
JL310
JL32 8
AUDI O SIGNAL
Q310 2SC4154TP-1EF
+32V SWITCHING REG
0.6
R312 10k
Q309 2SC5876T106QR
+32V SWITCHING REG
Q311 HN1A01FU-TE85R
+32V SWITCHING REG
POWER/FAN CONT.
AV-114 (2/5)
4-7
4-8
RDR-HXD870/HXD970/HXD1070
For Schematic Diagram Refer to page 4-4 for waveforms. Refer to page 4-47 for printed wiring board.
10
TEXTVI N
AV-114 BOARD(3/5)
VIDEO/AUDIO
-REF.NO.: 10,000 SERIESJL488
R458 470
2.2
1.6
R455 47
SIGNAL PATH
C461 1 B
Q403 ISA1602AM1TP-1EF
4.9 0.5
3 6
IC403 MM1503XNRE
JL485 IN 1 GND IN 2 SW OUT Vcc
VIDEO SIGNAL
4.9 JL48 7
1
0
2
CHROMA
Y_I N
Y/CHROMA
AUDI O SIGNAL
2.0
5
1.6
2
REC PB
4.9 4.9
4 1
JL486
4.9
3
C462 1
Q411 UMD2N-TR
B+
R459 75 0.5%
C460 1 B
2.3
IC402
BUFFER
B
R_IN L_IN
RCSEL1 RCSEL2 C472 10 50V
D420 DAP202uT106
R465 470
Q410 2SC4154TP-1EF
JL49 1
4.9 0
4.9
2.3 2.3
IC403
RCSEL
Y_I N C/R_IN
1.6
IC402 BA4558F-E2
4.6
8 1
RTOMAI N
9.0 4.6
+ 7 2
C475 10 50V
B+
Q413 DTC124EUA-T106
Q408 2SC4154TP-1EF
1.6
B+
4.6 4.6
+ 6 3 4
V+9V
4.6 4.6
5
AV1_ROUT
AV2_ROUT
AV1_LOUT
AV2_LOUT
CR_OUT
CB_OUT
YP_OUT
BLANK
RGBOUT
C_OU T
Y_OU T
JL4416
6
TO (2/5)
R_IN L_IN
R_IN L_IN
D401 UDZSTE-1711B
JL4423
JL4424
RCSEL1
RCSEL1
C471 10 50V
C474 10 50V
B+
C453 100 10V C404 1 10V F R401 0 R461 680
B+ B+
V+5VI V+5V O
GND
R402 560
R403 560
C401 1 10V F
JL456
JL45 5
R404 0
C407 1 10V B
C 408 1 10V B
4.9
D410 UMZ6.8N-T106
R407 0 C438 1 10V F
JL454
4.6 JL453
4.5 JL452
JL451
JL450
JL449
JL448
2.3 JL447
4.9 JL446
JL445
JL444
2.3 JL443
JL442
2.3 JL441
JL440
2.3 JL439
JL438
2.3 JL437
Y_IN TEXTVIN
2.3 JL436
Q402 2SD2114KT146
2.3
D801 UMZ6.8N-T106
C486 470 6.3V R468 68 0.5% JL441 8 R469 3.9 JL4422
4.6
4.5
4.5
9.0
4.5
4.5
4.5
2.2
2.3
TEXTVIN
A HorHDD/OUT(R)
A HorHDD/OUT(L)
A AV1/OUT(R)
A AV2/OUT(R)
A AV1/OUT(L)
A AV2/OUT(L)
A AV1/OUT2(L)
A AV1/OUT2(R)
A DVD M C
To DVD(R)
To DVD(L)
VCC
PAL SCART IN
F A DVD(R)
SLICER OUT
VIDEO AGC
MAIN C D
VCC
PAL SCART D2
PAL SCART D1
RGB M OUT
F DVD Pb(B)
F dvd Pr(R)
TO (1/5)
Y2IN C2IN XAMUTE2 AMUTE1 R_OUT L_OUT CSYNCIN SDA R408 470 R413 TU_LI N 470 TU_RIN C415 0.1 25V F R422 10k C468 0.1 C469 C411 1 0 . 1 JL483 10V B JL484 C412 1 10V B
81 A HIFI IN(R) 82 A HIFI IN(L) 83 V DVD M C 84 A L4 IN(R) 85 A L4 IN(L) 86 A TUNER IN(R) 87 A TUNER IN(L)
SCART B IN 50
R/CI N GI N
JL4420
R470 75 0.5%
JL441 9
R471 0
JL4421
D409 UMZ6.8N-T106
3
LINE 2 OUT
JL4401
IC401
VIDEO/AUDIO SELECTOR
0.3 0.3 4.4 JL432 4.4 JL431 4.8 JL430 C487 2.2 470 6.3V C 489 2.5 470 6.3V C 488 2.5 470 6.3V
R436 100 R437 100 SCL SDA CSYNCI N R472 68 0.5% R476 0.5% 68 R474 68 0.5%
D413 UMZ6.8N-T106
D414 UMZ6.8N-T106
4.5
R414 470 R415 470 R416 470 R417 470 R418 470 R419 470 JL480 C419 10V JL479 C420 10V JL478 C421 10V C422 JL477 10V C423 JL476 10V C424 JL475 10V 1 B 1 B 1 B 1 B 1 B 1 B 88 VREF(9V/2) JL464 4.5 JL465 4.5 JL466 4.5 JL467 4.5 JL468 4.5 JL469 4.5 89 A L3 IN(R) 90 A L3 IN(L) 91 A L2 IN(R) 92 A L2 IN(L) 93 A L5 IN(R) 94 A L5 IN(L) 95 GND JL470 96 A AV1 R OUT(R) C455 4.7 50V C418 1 10V F C497 0.1 25V F JL471 97 A AV1 R OUT(L) JL472 98 RF-C A OUT JL473 JL474 1.9 99 A AGC D 100 VTR VorV&S V3 IN
D415 UMZ6.8N-T106
D416 UMZ6.8N-T106
SDA
F DVD PY(G)
DVD C OUT
F A DVD(L)
MAIN C IN
F DVD C
F DVD Y
2VIN
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
JA401
4
BI N C476 0.01 25V B
S VIDEO
JL457 4.5
1.8 JL435
B+
V+5V P_SAVE L2_RIN L2_LIN AV1_RIN AV1_LIN AV2_RIN AV2_LIN JL4426 JL4427
R801 0 V
JA402
IC401 HA118326APFR-E
SYNC 41 PY(Y)OUT 40 Pr(Cr)/OUT 39 Pb(Cb)/OUT 38 GND V2 OUT FBCD C2 OUT S1/S2 B OUT V2 OUT 37
L2_LIN AV1_RIN AV1_LIN AV2_RIN AV2_LIN AV2_V/YIN AV1_V/YIN AV2_V/YOUT AV1_V/YOUT BOUT
VIDEO
CR
8 7
L
2.2
36
2.7 JL429
35
6
C439 0.1 16V B JL441 0 C490 470 6.3V R478 68 0.5% L_OUT R439 1.8M R480 3.9 C491 47 35V R479 470 JL49 4 JL49 6 JL4414
AUDIO L
L801 0uH JL440 3 C478 0 R
2.5 JL428
34 JL427 33
CB
2.1
32 31
S1/S2 B OUT
RS IN D OUT
VIDEO L3 IN
VIDEO L2 IN
VIDEO L1 IN
GND
SEP C2 IN
V C&S C3 IN
SEP Y1 IN
SEP Y2 IN
SEO C1 IN
DL3 DRIVE
59/61PIN
SYNC DET
TUNER IN
SYNC DET
Q406 2SD2114KT146
R482 100 JL497 JL4405 C482 470p 50V C485 0
VTR OUT
AV2 OUT
C1 OUT
V1 OUT
Y1 OUT
L802 0uH
BS IN
FBCD
FBCD
GND
GND
JL49 5
VCC
FBC
9
TO (4/5)
BG
R/COUT
VCC
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
R485 22k
R484 1k
0 0.7
2.3
JL40 5 1.8
4.8
JL40 6 2.3
JL40 8 1.8
JL40 9 0.6
JL41 0 2.3
JL41 3 1.8
JL41 4 1.8
JL41 5 2.7
JL41 6 1.8
2.9
JL41 7 2.2
JL41 9 1.7
JL42 0 2.7
2.2
JL42 2 2.7
JL42 4 4.9
4.9
JL42 5
GIN
JL40 4
JL40 7
JL41 1
JL41 2
JL41 8
JL42 1
R/CIN BIN RGBOUT RGBOUT AV2_ROUT AV2_LOUT AV1_ROUT AV1_LOUT RTOMAIN AV2_ROUT AV2_LOUT P_SAVE JL40 1
2.3 0
JL40 2
R421 1.8M
R420 1.8M
R448 0
R438 0
BIN
JL42 3
R/CIN
2.2
B+
C493 47 35V
R432 1M
R430 1M
AV1_LOUT RTOMAIN
Q401 DTC124EUA-T106
R431 1M R428 0
AV1_ROUT
Q407 2SD2114KT146
0
R490 100
JL49 8
C443 1 10V B
C440 0.1 16V B C445 C496 C434 0.1 0.1 1 25V 16V 10V F B B
C441 1 10V F
D402 DTZ-TT11-6.8B
R444 75 0.5%
TU_RIN
D422 NNCD3.9F-T1B
8
TO (5/5)
D421 NNCD3.9F-T1B
TU_LIN TU_VIN
R445 75 0.5%
C444 1 10V B
R447 75
0.5%
D419 1SS355TE-17
AMUTE1
0 2.7
2
4.2 0
5
JL493
AV1_V/YI N
AV2_V/YOUT
AV1_V/YOUT
AV2_V/YIN
G
Y2I N C2IN
V+5V
D418 1SS355TE-17
C463 0.1 25V F C481 0.1 25V F
4.3
Q404 UMD2N-TR
TU_VIN
2VI N
4-9
4-10
VIDEO/AUDIO
AV-114 (3/5)
RDR-HXD870/HXD970/HXD1070
For Schematic Diagram Refer to page 4-47 for printed wiring board.
1
EURO
7
B+
R515 560 R516 1.2k
10
AV-114 BOARD(4/5)
-REF.NO.: 10,000 SERIES-
JL533
A
0
R569 1k
R566 22k SQU C551 22 25V R568 12k FUNC_ON AVLTH +5V JL527 R506 R507 4.7k R509 27k 0
R517 1.5k
R518 JL53 1 10
12.0
JL532
12.0
-1.9
1.7
D501 UDZS-TE17-5.1B
B+
JL514 R510 2.2M R508 47k JL515
JL529
5.0
JL528
JL53 4
R562 10k
AVLIN
4 CONT
IC406 TC7S66FU(TE85R)
4.9 4.9
C550 22 25V R564 15k
VCC
D523 DAN217UT106
R574 0 JL53 0
D502 U DZS-TE17-5.1B
D526 1SS355TE-17
3
TO (1/5)
IN/OUT
R565 680
4.5
B
5
TO (2/5)
V+5VI
B+
4.9
2.9
C547 22 25V
AVLOUT FUNC_IN
2.3
BLANK SAMUTE
IC406
D514 UMZ6.8N-T106 D516 UMZ6.8N-T106 D517 UMZ6.8N-T106 Q506 HN1C03FU-TE85R MUTE SW
JL505 0.7 JL512 JL508 JL513 AV LTH SW
1.1
GND
0
JL517 C511 220p R512 100k
OUT/IN
2.9
0 4.5
4.5
6.3 4 1 9.5 0
5
0 2
6 3
D524 DAN217UT106
R519 56k
R560 15k
D530 UDZSTE-1713B
D513 UMZ6.8N-T106
D515 UMZ6.8N-T106
B+
V+12R1 RTOMAIN AV1_ROUT AV1_RIN AV1_LOUT AV1_LIN
0 6 3 0 0.7
5 1 4 2
D531 UMZ6.8N-T106
C516 470p C518 1000p JA501 42P L851 L853 L852 0uH 0uH 0uH JL54 9 JL55 0 JL55 1 JL55 2 JL55 3 JL55 4 JL55 5 JL55 6 JL55 7 JL55 8 JL55 9 R529 100k R563 0 L501 L855 0uH 0uH L856 L858 L857 0uH 0uH 0uH JL56 0 JL56 1 JL56 2 1.ROUT 2.RIN 3.LOUT 4.GNDA 5.GNDV 6.LIN 7.BOUT 8.FUNCTION 9.GNDV 10.N-LINK 11.GOUT 12.NC 13.GNDV 14.GNDV 15.R/COUT 16.BLANK 17.GNDV 18.GNDV 19.V/YOUT 20.V/YIN 21.GNDV
D528 1SS355TE-17
R542 100
R534 3.9k
R537 100
1 3 5 7 9 10 8 6 4 2
R539 100
JL51 9
R522 3.9
C520 1000p
L854
0uH
D518 UMZ6.8N-T106
D519 UMZ6.8N-T106
D520 UMZ6.8N-T106
D521 UMZ6.8N-T106
D522 UMZ6.8N-T106
TO (3/5) JL501
0 11.2
3 6
0 0.7 2
R532 75 0.5%
32
R573
0uH
D529 UDZSTE-1713B
30
31
29
JL503
R545 100
R552 470
28
27
L859 0uH
26
25
R553 100
D505 UMZ6.8N-T106
24
R551 100
23
21
11.3
20
R530 75 0.5%
19
18
15
17
16
14
R548 100k
R549 100k
C530 R523 68 C 531 470 470 6.3V 0.5% 6.3V R525 68 0.5% R527 0
R524 3.9
13
12
C519 470p
11
LINE 1 / TV
D509 UMZ6.8N-T106
D510 NNCD3.9F-T1B
D511 UMZ6.8N-T106
D508 NNCD3.9F-T1B
D512 NNCD3.9F-T1B
R554 100k
R555 100k
R571 75 0.5%
R514 75 0.5%
R503 75 0.5%
R502 75 0.5%
R501 75 0.5%
L861 0uH
E
R504 68 0.5% 0 R505 3.9 75 0.5% AEP,UK AUS
EURO
AV-114 (4/5)
4-11
4-12
42
R559 0
41
AV2_V/YOUT AV2_V/YIN
40
39
36
L803 0
L862 0uH
22.ROUT 23.RIN 24.LOUT 25.GNDA 26.GNDV 27.LIN 28.BIN 29.FUNCTION 30.GNDV 31.N-LINK 32.GIN 33.NC 34.GNDV 35.GNDV 36.R/CIN 37.BLANK 38.GNDV 39.GNDV 40.V/YOUT 41.V/YIN 42.GNDV
22
34
38
37
35
33
LINE 3 / DECORDER
RDR-HXD870/HXD970/HXD1070
For Schematic Diagram Refer to page 4-4 for waveforms. Refer to page 4-47 for printed wiring board.
3
AERIAL
AV-114 BOARD(5/5)
TUNER
-REF.NO.: 10,000 SERIESIN
OUT
U601 (TUNER TMFE2-4707A)
AUDIO OUT VIDEO OUT JL617
SIF OUT
AGC OUT
JL603
JL605
JL608
JL609
JL610
JL611
JL612
JL616
AFT OUT
A
NC BB
GND
GND
SDA
SCL
MB
TU
R635 0uH
R636 0uH R637 0uH
V+5B B V +32V
B+ B+ B+
JL60 1 JL602
R638 100
L601 0uH
SIGNAL PATH
VIDEO SIGNAL
B+
CHROMA REC
Y/CHROMA
AUDI O SIGNAL
7
TO (2/5)
V+5TU
L602 0uH C602 2200p 50V B R609 0 R603 0 C609 C603 C604 100 2200p 100p 10V 50V 50V B C606 10p 50V C605 10p 50V AFT L604 0uH R607 1k C611 47 16V C608 0.47 10V B
PB
JL61 8
4.5 3.9
R605 10k
1.6
2.2
JL620
B+
+5V
B+
L607 100uH C613 0.1 25V F C614 0.1 25V F C640 100 10V
44
L606 0uH
C638 10 50V
JL635 JL637
C641 10 50V
L608 0uH
B+
C 642 100 10V C619 0.1 25V F R623 1k
2.6
2.5
VREFTOP
MONOIN
NC/ASG
SC1R
AVSS
NC
NC
NC
CAPLM
AGNDC
AHVSS
C620 C643 C622 C621 1 100 56p 56p 10V 50V 50V 10V F
3.5
34
43
42
41
40
39
38
37
36
35
4.9
1
AHVSUP NC
5.0
JL64 6 JL64 7 JL64 8 JL64 9 JL650 C 629 3900p 50V B JL65 6
JL62 1 1.5
2
TU_VIN
33 32
JL65 9 TU_LIN
4
TO (1/5) R632 22
R631 4.7k
JL62 2 1.5
4.9 1.5
JL614
C623 3p 50V CJ
IC601
EURO MSP
2.3
5
R624 3.3k
31
3 4 6
2.2
8
TO (3/5 )
30 29
JL62 3 2.1 X601 18.432MHz C624 3p 50V CJ R616 JL62 4 0 JL62 5 JL62 6
0.9
JL615
IC601 MSP3417G-QG-B8V3
28
1.4 1.4
JL65 1 JL65 2 R626 1k C627 0.1 25V F C626 0.1 25V F
27
MSPSTAT
0
8 9
26
R634 2.2k
R633 100
25
10 11
24
JL660
23
DVSS
SDA
SCL
10
TU_RIN
TP
TP
TP
TP
TP
TP
R627 3.3k
JL63 8
JL64 0
JL64 2
JL634
JL636
4.9
4.8
JL644
B+
JL645
4.3
4.3
12 JL631 JL633
R620 0
13
14
15
16
17
C625 1 10V F
18
19
20
21
22
R628 3.3k
JL655
XRST1
Note :
The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.
4-13
4-14
TUNER
AV-114 (5/5)
RDR-HXD870/HXD970/HXD1070
For Schematic Diagram Refer to page 4-4 for waveform. Refer to page 4-51 for printed wiring board.
4
C148 2p 50V CK
5
X100 27MHz F101 0uH
6
IC110 TC7SH04FU(T5RSONYJF)
C149 2p 50V CK
1.6 3.3
10
11
12
13
14
DT-120 BOARD(1/5)
EMMA2LL
IC110
INV
C154 0.1 16V F R105 33 JL1139 CI_27MHz XRESET
1.3
1
1.6
IC104 KA5SDKAS01TSN
XTB NC VC VSS XT STB VDD O0
NC INA GND
VCC
1
1.4
1.6
3.3
R182 0
1 2 3 4
8
3.3
R107 0
OUTY
7 6
1.3
IC104
27MHz DSC
DQ15 DQ14 DQ13 DQ12 DQ11 DQ10
B+
R726 10k
I2C_SCL_DTBR
I2C_SDA_DTBR
XCI_VCC_5V
R155 47k
IC322 TC7SB66FU(TE85R)
1.2 3.3
R154 47k
R534 0 R532 0
R531 0
1.1
R194 56
R159 100
R642 0
R651 0
R160 100
R643 0
B+
C120 0.1 C116 0.1
IC322
SW
C117 1 R149 47k
R641 0
IC321 TC74VCX245FK
3.3 3.2 1.9 0.4 0.4 0.8 0.4 0.5 0.5 0.7
20
JL1112
C128 0.1
R172 10k
C194 1
R644 0
R725 10k
1.6
1 2
0
5 TO (5/5)
19 18
3
0
17
IC318 NJM12904V(TE2)
4
1.6
16
B+
R110 56 R111 56 5 4
1.2
5
0
15
R173 0
JL1154
B+
JL580
B+
14
1.2
R114 33
+ -
+ -
7
0
JL116
13
JL1123
JL1124
JL1122
R101 10k
R170 33
JL1118
JL1119
JL1120
JL1121
JL1101
JL1102
JL1103
JL1104
JL1105
JL1106
JL1107
JL1108
JL1109
JL599
JL598
JL597
JL596
JL595
B+
2.5 0.2 0.2 0.4 0.2 0.2 1.0 2.5 3.1 3.1 3.1 0.8
JL1110
3.3
1.2
R724 150
8
0
12
R662 0
3.1
10
11
JTDO
DQ10
JTCK
JTMS
PPORT41 1.2 PPORT40 1.5 PPORT39 0 PPORT38 3.3 PPORT37 0.6 PPORT36 0 PPORT35 1.5 PPORT34 0 PPORT33 0 PPORT32 0 PPORT31 0 PPORT30 3.3 SCL0 3.3 SDA0 0 PPORT29
GND_14
GND_13
GND_12
GND_11
PPORT44
PPORT43
PPORT42
PPORT28
VDD2_2
VDD2_1
JTRST
DQ11
DQ12
DQ13
DQ14
DQ15
IC101
256M DDR IC101 K4H561638H-UCB3T
2.5
B+
R666 0
JL579
F102 0uH
162 161 160 159 158 157 156 155 154 153 152 151 150 149 148 147 146 145 144 143 142 141 140 139 138 137 136 135 134 133 132 131 130 129 128 127 126 125 124 123 122 121 120 119 118 117 116 115 114 113 112 111 110 109
C
DQ0
C144 100 16V C101 1 6.3V X6S C102 0.1 16V F R696 33
IC318
V REF
DQ9
0.8
C618 10 10V C
JL1155
C193 1
1.1
163 164
GND_15 GND_16 DQ9 DQ8 DQS1 DVREFDVREF DQM1 DCLKBDCLKB DCLK DCKE DADD12 DADD11 VDD2_3 GND_17 VDD1_5 DADD9 DADD8 DADD7 DADD6 DADD5 DADD4 GND_18 GND_19 VDD2_4 DADD3 DADD2 DADD1 DADD0 DADD10 DBA1 DBA0 GND_20 VDD2_5 DCSB DRASB DCASB DWEB DQM0 DQS0 DQ7 DQ6 DQ5 VDD2 GND_21 VDD1_6 DQ4 DQ3 DQ2 DQ1 DQ0 VDD2_6 GND_22 GND_23 VDD3_
VDD1 DQ0 VDDQ1 DQ1 DQ2 VSSQ1 DQ3 DQ4 VDDQ2 DQ5 DQ6 VSSQ2 DQ7 NC1 VDDQ3 LDQS NC2 VDD2 NC LDM /WE /CAS /RAS /CS NC3 BA0 BA1 A10/AP A0 A1 A2 A3 VDD3
VSS3 DQ15 VSSQ5 DQ14 DQ13 VDDQ5 DQ12 DQ11 VSSQ4 DQ10 DQ9 VDDQ4 DQ8 NC6 VSSQ3 UDQS NCS VREF VSS2 UDM /CK CK CKE NC4 A12 A11 A9 A8 A7 A6 A5 A4 VSS1
165
1.0
DQ15
166
1.1
2.5
167
1.2
DQ1 DQ2
DQ14 DQ13
DQM1
168
0
DQ3 DQ4
SDCLKB SDCLK DQ12 DCKE DQ11 R695 33 DADD12 DADD11 R192 100 JL1156
R598 68 R597 68
169
1.2
170
1.3
171
2.4
0.3
172
0
2.5
DQ5
R705 33
173
0
0 0
0 0 2.5 0
DQ10 DQ9
0.8
175 176
1.5
0 PPORT23 0 PPORT22 0 PPORT21 3.3 PPORT20 0 PPORT19 0 PPORT18 0 PPORT17 0 PPORT16 3.3 PPORT15 0 PPORT14 0 PPORT13 0 PPORT12 1.5 DVDD_2
JL104 108 JL105 107 JL114 106 JL106 105 JL107 104 JL108 103 JL109 102 JL110 101 JL111 100 JL153 99 JL154 98 JL155 97 96 95 94 93 92 91 90 89 88 87 86 85 84
1.3
IC321
BUFFER
R729 0 SCL_VDEC SDA_VDEC
66
1 2 3 4 5 6 7 8 9 10 11 12 13 14
XCOFDM_RESET R575 10k R142 10k R143 10k R144 10k R589 0 CI_VS1 1 2
R728 0 AT/XDT GND SDA_VDEC SCL_VDEC GND TDXA RDXA GND XRESET GND(RFE/LL) GND VCLK GND VDO7 VDO6 VDO5 VDO4 VDO3 VDO2 VDO1 VDO0 GND ALRCK ADATA ABCK GND SPDIF GND
65 64 63 62 61 60 59 58 57 56 55 54 53
CN102 28P
B+
R145 10k INT_CI R605 0 R622 22k C591 R621 10p 22k 50V JL1136
3 4 5 6 JL1135 C592 10p 50V JL1134 7 8 9 C590 10p 50V JL1133 10 11 12 13 JL1132 14 JL1131 15 JL1130
R606 0
R699 33
DGND_3 DGND_2 1.3 REF1 1.3 RSET1 3.3 AVDD_4 AGND_4 0.5 VAPB 3.3 AVDD_3 AGND_3 0.7 VAPR 1.5 DVDD_1 DGND_1 REF0 RSET0 AVDD_2 AGND_2 VACVBS AVDD_1 AGND_1 VAY TEST GRDYB ALRCK ADO ATX ABCK VDD1_3 GND_8 GND_7 AMCK GCCB0 FCSB0 FWEB FOEB RADD22 RADD21 RADD20 RADD19 RADD18 RADD17
177
0
B+
R167 910 B+ R168 220 F104 0uH
DQS0
178
0.4
2.5 0.6
52
15 16 17
0.6
DQS1
R169 150
51 50
180
2.1
181
0.3
2.5
1.2
182
1.9
R121 100
R122 100
R721 100
49
18 19 20 21 22
C138 0.1 R123 100 C137 1 F105 0uH R166 910 C136 1 R125 100 C135 0.1 R128 100 R104 10k EC10 EC6 R580 10k SPDIF EC9 C134 0.1 EC10 EA1 EA2 R579 10k EC9 EC7 EC6 EC8 R100 0 LLA22 EA22 EA21 EA20 EA19 EA18 EA17 EA3 EA4 EA5 EA6 EA7 EA8 EA9 EA10 EA11 EA12 EA13 EA14 EA15 EA16 EA17 EC7 EC8 R127 100 R126 100 R616 47 R610 47 R608 47 R609 47 R124 100 R722 100
48 47 46 45
R702 33
DRASB DCSB
R197 0 R199 0
IC106
EMMA2LL IC106 UPD61111GM-100-UEV-A
44
23 24 25
187
0.4
43
0 0 0 1.1 1.1 1.2 1.3 1.2
83
1.3
42
189
0.1
82
3.3
41
26 27 28 29 30 31 32 33
190
2.1
81 80
0.4
40 39 38 37 36 35 34
191
1.9
R188 100
192
0.5
79
3.3
78 77
0.4
195
2.2
76
0
196
2.4
75
3.3
197
2.3
74
1.6
198
2.4
73
0
EC6 EC7 EC8 EC9 EC10 EA1 EA2 EA3 EA4 EA5 EA6 EA7 EA8 EA9 EA10 EA11 EA12 EA13 EA14 EA15 EA16 EA17 EA18 EA19 EA20 EA21 EA22 LLA22 ED0 ED1 ED2 ED3 ED4 ED5 ED6 ED7 ED8 ED9 ED10 ED11 ED12 ED13 ED14 ED15 6 TO (2/5)
R595 56
199
0
72
1.6
200
0.7
71
1.6
201
0.2
70
1.5
202
0
69 68 67 66
3.2
1 TO (3/5)
XCD FDM_RESET
R186 56 C111 1
203
0
204
2.4
205 206
1.5
JL581
65
3.2
R594 56
C110 0.1
207
0.2
64
3.2
208
0
63
3.2
209
0
62
0
210
0
61
0
XRESET_FLASH CI_27MHz
211
0
60
0
212
2.4
59
0
58
0
CI_TPS_0 CI_TPS_1 CI_TPS_2 CI_TPS_3 CI_TPS_4 CI_TPS_5 C108 0.1 C127 0.1
57
0
56
0
PPORT10
PPORT11
216
RDATA10
RDATA11
RDATA12
RDATA13
RDATA14
RDATA15
RADD16
55
RADD10
RADD11
RADD12
RADD13
RADD14
RADD15
PPORT0
PPORT1
PPORT2
PPORT3
PPORT4
PPORT5
PPORT6
PPORT7
PPORT8
PPORT9
VDD1_1
VDD3_1
VDD1_2
VDD3_2
53
3.3
RDATA0
RDATA1
RDATA2
RDATA3
RDATA4
RDATA5
RDATA6
RDATA7
RDATA8
RDATA9
RADD0
RADD1
RADD2
RADD3
RADD4
RADD5
RADD6
RADD7
RADD8
RADD9
GND_1
GND_2
GND_3
GND_4
GND_5
1
3.3 0
2
3.2
3
0
4
0
5
0
6
0
7
0
8
0
10
0
11
12
13
1.5
14
0
15
0
16
3.2
17
0
18
0
19
0
20
0
21
0
22
3.2
23
0
24
3.2
25
0
26
0
27
3.3
28
29
0
30
0
31
3.2
32
0
33
0
34
0
35
0
36
0
37
0
38
0
39
0
40
0
41
0
42
43
44
1.5
45
0
46
0
47
0
48
0
49
0
50
0
51
0
52
0
GND_6
54
EA18
B+
C115 47 16V
B+
C118 0.1
CI_TPS_10
B+
C107 1 C124 0.1 C125 0.1 C126 1
ED0 ED1
CI_TPS_10
CI_TPS_8
CI_TPS_9
CI_TPS_0
CI_TPS_1
CI_TPS_2
CI_TPS_3
CI_TPS_4
CI_TPS_5
CI_TPS_6
EA10
EA11
EA12
EA13
EA14
EA15
EA16
EA1
EA2
EA3
EA4
EA5
EA6
EA7
EA8
EA9
ED10
ED11
ED12
ED13
ED14
ED15
F108 0uH
F106 0uH
F103 0uH
CI_TPS_7
ED2
ED0
ED1
ED2
ED3
ED4
ED5
ED6
ED7
ED8
ED9
ED3 ED4
ED0
ED1
ED2
ED3
ED4
ED5
ED6
ED7
ED9
ED10
ED11
ED12
ED14
ED15
R116 10k
R535 22k
B+
D+3.3V A+3.3V
R547 22k
D+2.5V
B+
SPDIF
ED5 ED6
B+ B+
B+
R538 22k R540 22k R542 22k R544 22k R550 22k R554 22k R556 22k R558 22k R560 22k R564 22k R546 22k R566 22k
TO (4/5)
B+
R568 22k
V+1.5V
EMMA2LL
DT-120 (1/5)
4-15
4-16
RDR-HXD870/HXD970/HXD1070
For Schematic Diagram Refer to page 4-4 for waveform. Refer to page 4-51 for printed wiring board.
10
(AEP2 MODEL ONLY)
11
12
13
14
15
DT-120 BOARD(2/5)
CI CONTROL
CN201
MDO9
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
R222 10k
MDC1 MA10
R281 10k
MDC3 MA11
R208 47
R207 47
EA 2 EA 3
EA2
R206 47
EA 1
EA1
EA4 EA5
C205 0.1
EA3
F206 0uH
MDC7
IC202 IC205
32M FLASH
EA 1 R254 47 EA1A EA2A
IC203
IC204
0.6 0.6 0.6 0.6 0.6 0.6 5.0 0 0 0 0 0
B+
TP216 18 MDI9 MDI8 MA12 R277 47 1/16W CHIP 5% MA7 MDC7 R219 10k MA6 MA5 MA4 MA3 C209 0.1 C210 47 R231 820 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 MDC0 R203 47 MDO3 MDC2 MDO7 MDC1 MDO6 MDO4 MDO5 MDO6 MDO7 36 37 38 39 40 41 42 43
0.6
0.6
EA10 EA11 EA12 EA13 EA14 EA15 EA16 EA17 EA18 EA19 EA20 EA21 EA22 LLA22 EC6 EA21 EA20 EA19 LLA2 2 EA22 R241 47 EA21A EA20A EA19A R242 47 R240 47 LLA22A EA22A ED0A ED8A ED1A ED9A ED2A ED10A ED3A EA10A EA9A EA8A EA7A ED11A C213 0.1 ED4A EA 6 EA 5 EA 4 EA 3 R243 47 ED12A EA6A EA5A EA4A EA3A ED5A ED13A ED6A ED14A EA17A EA16A EA15A R245 47 ED7A ED15A EA14 EA13 EA12 EA11 EA14A EA13A EA12A EA11A EA 2 EC7 EC8 EA18 R239 47
0
VCC_DVB1
MOSTRTA
MOSTRTB
MOVALA
MOVALB
MOCLKA
MOCLKB
WAITA#
WAITB#
MDOB0
MDIA7
MDIB7
MDIA6
MDIB6
MDIA5
MDIB5
MDIA4
MDIB4
0.6
109
108
107
106
105
104
103
MICLKA
MICLKB
MIVALA
IC205 S29GL032A90TFIR30H
24 25 11
0 0 0 0 0 0 0 0 0
IC202 TC74LCX245FK(EL)
10
EA3A EA4A EA5A EA6A EA7A EA8A EA9A EA19A EA20A C206 0.1
3.2
R209 47 JL21 4
MIVALB
MDIA3
RSTA
RSTB
REG#
128
127
126
125
124
123
122
121
120
119
118
117
116
115
114
113
112
111
110
1 2
0
MDOA0 MDOB1 MDOA1 MDOB2 MDOA2 CD2B# CD2A# GND_DVB1 GND_PROC MOCLK_IN NC EXTINT EXTCS INT MAIT/ACK WR/STR RD/DIR CS A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 SDA SCL SA0 SA1 RESET CLK VCC_CORE GND_CORE VCCPROC
MDIB3 RDY/IROA# RDY/IROB# MDIA2 MDIB2 WE# VCC ADLE ADOE# DATDIR DATOE# VCCEN CD1B# CD1A# MDOB3 MDOA3
0 0 0.5
EA2A EA18A
12
13
27
22
EA16
26
23
CE# VSS2 OE# DQ0 DQ8 DQ1 DQ9 DQ2 DQ1RY DQNP# DQ11 VCC DQ4 DQ12 DQ5 DQ13 DQ6 DQ14 DQ7 DQ15 VSS1 BYTE# A16
A2 A3 A4 A5 A6 A7 A17 A18 BY# ACC A21 RESET WE# A20 A19 A8 A9 A10 A11 AA12 A13 A14 A15
B7 B6 B5 B4 B3 B2 B1 OE VCC
A8 A7 A6 A5 A4 A3 A2 A1 DIR
R253 47
A0
A1
B8
GND
JL21 5
MD 7
0
98
MD 6 JL21 3 MD 5
5.0
0.5 0.5
MA2 MA1 R205 47 MDI2 MD06 MDI1 MDI0 MA0 MD0 MD1
97
28
21
14
96
29
20
15
MD 4 R223 47 MD 3 MD 2 MD 1 MD 0 R213 47 CHIP 1/16W 5% EC10 R234 47 CHIP 1/16W 5% R257 47 CHIP 1/16W 5% R256 47 CHIP 1/16W 5% R233 47 CHIP 1/16W 5% EA16A EA17A R211 10k
3.3
30
19
16
R210 0
95
8 9
0.5
94
31
18
17
93
10
0.5
R204 47
32
17
18
92
11
33
16
19
B+
91
12
34
15
20
3.3
90
13
35
14
INT_CI
14
89
37
12
6
TO (1/5) ED 0 ED 1 ED 2 ED 3 ED 4 ED 5 ED 6 ED 7 ED 8 ED 9 ED10 ED11 ED12 ED 0 ED 1 ED 2 ED 3 ED 4 ED 5 ED 6 ED 7 ED 8 ED 9 ED10 ED11 ED12 ED13 ED14 ED15
EA10 EA 9 EA 8 EA 7
36
13
15
88
3.2 3.3 0 0 0 0 0 0 0 0 0 0
16
87
38
11
17
86
39
10
IC201
CI CONTROL IC201 CIMAX-SP2L
MDOB4 MDOA4 MDOB5 MDOA5 MDOB6 MDOA6 CE1B# CE1A# MDOB7 MDOA7 CE2B# GND_DVB2 DE2A# OE# IORD# IOWR# MISTRTB M ISTRTA MDIB0 MDIA0 MDIB1 MDIA1
18
85
40
41
IC203 TSB
11
R227 47 EA5A EA6A MA 5 MA 6 EA7A EA8A LE Q4 D4 D5 Q5 Q6 D6 D7 Q7 VCC GND Q3 D3 D2 Q2 Q1 D1 D0 Q0 OE
19 20
84 83
42
10
43
12
EA18A EA19A EA4A EA20A EA3A R225 47 EA21A MA3 MA2 MA1 MA0 EA2A EA1A EA22A R236 0
0.4
MDC2
21 22
82 81 80
44
13
MDC4 MDC5
44 45 46 47 48 49 50 51
23
45
14
79
24
R202 47
46
15
78
25
R251 10k
47
16
3.2 0
77
26
48
17
76
27
18
75
28
19
EA18A
MA 7 C207 0.1
MDI3
74
29
B+
ED 0 ED 8 ED 1 ED 9 R246 47 ED0A ED8A ED1A ED9A C212 0.1 C211 47 16V F20 2 0uH
20
3.3
I2C_SDA_DTBR I2C_SCL_DTBR
R214 100
3.3 3.3
73
30 31
5.0
72
R215 100
0
JL21 2
71
32 33
70
R247 47
CI_RESET CI_27MHZ
R216 0
0 1.3
R201 47
34 35
69 68
IC204 TSB
11
R228 47 MA 9 EA10A
R252 0
3.3
36 37
67 66
10
GND_TSD
GND_TSO
MOVAL
MOCLK
MIVAL
MICLK
MDI0
MDI1
MDI2
MDI3
MDI4
MDI5
MDI6
13
D4 D5 Q5 Q6 D6 Q7 D7 VCC
D3 D2 Q2 Q1 D1 D0 A1 OE
14
F
2
TO (1/5,3/5) I2C_SDA_DTBR I2C_SCL_DTBR I2C_SDA_DTBR I2C_SCL_DTBR
16
ED 6 ED14 ED 7 ED15
R249 47
0 0 0.6 0.6
MDI7
C201 0.1
VCC_T
MDO0
MDO1
MDO2
MDO3
MDO4
MDO5
MDO6
MDO7
Q4
Q3
MOSTRT
VCC_TSI
MISTRT
ED 2 ED10 ED 3 ED11
R248 47
5.0 0.6
3.3 0.6
38
65
LE
GND
12
R217 0
15
3.3
3.3
3.3
MA10 EA11A
17
0 3.3
3.3
MA11
EA12A
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
F201 0uH
18
C203 0.1
F204 0uH
19
B+ B+
B+
MDO2 MDC11
C208 0.1
20
3.3
JL21 7
3.3
F203 0uH
C202 0.1
R278 100
R279 100
R280 100
R626 0
R625 0
R624 0
CI_TPS_1 R230 10k CI_TPS_2 CI_TPS_3 CI_TPS_4 CI_TPS_5 CI_TPS_6 CI_TPS_7 CI_TPS_8 CI_TPS_9 CI_TPS_10
CI_TPS_0 CI_TPS_1 CI_TPS_2 CI_TPS_3 CI_TPS_4 CI_TPS_5 CI_TPS_6 CI_TPS_7 CI_TPS_8 CI_TPS_9 CI_TPS_10
5.0 0
JL20 9 JL21 0
JL21 1
G
TS1_0 TS1_1 TS1_2 TS1_3 TS1_4 TS1_0 TS1_1 TS1_2 TS1_3 TS1_4 TS1_5 TS1_6 TS1_7 TS1_8 TS1_9 TS1_10 R627 0 R628 0 R629 0
3
TO (1/5)
7
TO (3/5)
IC208 ST890BDR
5.0
5.0
C I_TPS_9 C I_TPS_10
C I_TPS_8
TS1_10
C222 1
R272 10k
IC208
CI5V SW
7
0 0
5.0
C221 47
R270 10k
R269 5.6k
B+
D+5V
B+ B+ B+
B+
CI+5V
T O ( 4 / 5 ) DT+3.3V GNDD
B+
4-17
4-18
CI CONTROL
DT-120 (2/5)
RDR-HXD870/HXD970/HXD1070
For Schematic Diagram Refer to page 4-4 for waveform. Refer to page 4-51 for printed wiring board.
6
IC307 MM1689FHBE
3.2
8
C393 2.2 10V B C391 0.01 25V B
10
11
DT-120 BOARD(3/5)
DIGITAL TUNER
1
IC307
SWITCH
8
C 341 1 10V B
1.8
R304 10k
3.2
3.3
L314 0uH
2 3
7 6
B+ R305 0
3.3
1.8
4
C431 2.2 10V B 2012 C319 100 16V
5
C 340 1 10V B C392 2.2 10V B
B+
DIGITAL AWRAL
IN U301 C378 10 16V OUT F 311 0uH
R323 0
F316 0uH
5.0
C395 47 16V VCC INPUT INPUT VAGC GND1 OUTPUT1 OUTPUT2 GND2
1.2
1 2
1.2
2.3
B+
JL333
1.8 1.8 1.7 1.7 3.3 1.8 3.3 3.3
7
2.3
RF MODULATOR
2.1
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
IC311 UPC3221GV
JL308
0
AGC Mon.
BT(+32V)
B2(+5V)
B1(+5V)
IF OUT
IF OUT
ADRS
SDA
SCL
NC
B
F 309 0uH
JL332 TS1_7 JL331 TS1_6 JL330 R678 * TS1_5 JL329 TS1_4 JL328 TS1_3 JL327 TS1_2 JL326 R679 * C421 0.1 25V F R686 10k R685 10k R681 * C422 0.1 25V F TS1_1 JL325 TS1_0 7 TO (2/5)
IC311
AGC
4 6
R688 0 C375 0.01 25V B
49 JL309 50
1.8
32
0
31
0
51 52
0
30
0
B+
R668 0 R316 4.7k R683 0
29
0
T300
Q305 2SC2412K-T-146-QR
C367 10 F310 50V 0uH C 368 47 16V F 312 C364 JL306 0uH 0.1 25V JL30 7 F C384 C369 0.1 R322 1000p 16V 33k 50V B B
53
0.7
28
B+
R308 6.8k
54 55
1.7
IC313
OFDM DEM
27
0
D304 1SS355TE-17
0.7
R671 1M
26
0
56
1.7
25
57
3.3
IC313 DRX3975D
3.3
24 23
0
X300 20MHz
22
0
JL324 R680 *
JL323 TS1_10
60
3.3
21
0
C
R331 1.5k
61
3.3
20 19
2.1 0
18
0
17 R682 *
1
3.3
2
1.8
10
11
12
13
14
3.3
15
3.3
16
3.3
JL31 4
TO (1/5,2/5)
I2C_SDA_DTBR
B+
R341 3.9 k R342 3.9 k
B+
C416 0.1 25V F R333 100 C417 0.1 25V F 1 XCOFDM_RESET TO (1/5) C418 0.1 25V F
DT+3.3V
B+ B+
F317 0uH JL30 5
B+
B+
V+3.3SW
F318 0uH
JL304
B+ B+ B+ B+
IC312 MM1685ANRE
R310 2.2k R309 2.2k
R337 0 F397 0uH F398 0uH C361 22p 50V C356 22p 50V F305 0uH
E
V+5.8E
IC312
5.0
D303 1SS355TE-17
R312 100
B+
JL33 4
5.7
5V SW
JL335 C404 2.2 10V B R321 4.7k C382 47 16V C381 47 16V C380 0.1 25V F
5.0 5.0
B+
VOU T
JL303
9 TO (4/5)
4.9
NOISE
1.3
VIN
VOUT GND
IC312
5V SW
4.5
ON
FLAGB
5.0
B+
F306 0uH C372 0.1 25V F R311 680 C370 100p 50V C414 0.1 25V F
IC309 FPF2007
IC309
5.0
Q306 2SA1576A-T106-QR
5.0
5V SW
R314 4.7k
C354 1 10V B
C353 10 16V
D302 SM15T6V8A
F
Q308 2SC4081T106R
4.5 0
5.0
R359 10k
R315 10k
Q307 2SC4081T106R
1.9
C320 4.7 6.3V B R352 10k R689 R690 0 0 R692 0 R343 0 R345 0 R347 0
Q310 DTC143EUA-T106
Q309 DTC143EUA-T106
R691 0 R350 0 R348 0 R693 0 R344 0 R346 0
R349 0
E KN301
DIGITAL TUNER
DT-120 (3/5)
4-19
4-20
JL31 3
JL32 0
JL315
JL316
JL317
JL318
JL319
I2C_SCL_DTBR
*R678, 679 : 100x4 (AEP1, AEP3, UK,AUS MODEL) R678, 679 : 33x4 (AEP2 MODEL) R680, 681, 682 : 100 (AEP1, AEP3, UK,AUS MODEL) R680, 681, 682 : 33 (AEP2 MODEL)
1 2 3
2 3
RDR-HXD870/HXD970/HXD1070
For Schematic Diagram Refer to page 4-4 for waveform. Refer to page 4-51 for printed wiring board.
8
CN103 24P R623 0 1 JL430 GND P_CONT V+5.8E GND V+5.8E GND EV+12.1V GND V+32V P_CONT2 DET_ANT ANT5V_SW DT_TUON GND FANGND Y_IN GND B_IN GND G_IN GND C/R_IN GND
DT-120 BOARD(4/5)
POWER
B+
C524 0.1
2 JL431 3 4 5
B+
CN202
IC304
JL401 JL402 2 JL403 3
B+
C621 0.022 50V B
5.0
6 JL432 7 8 9 JL433
B+ B+
B+
R306 0
1 2
VOUT
JL408
B+
B+
C598 0.1 C601 100 16V C593 0.1 C597 220 4V C596 0.1
C309 1 B
JL409
4.6
NOISE
1.3
C326 470p
C332 2.2 B
C339 47 16V
IC306 S-1170B50UC-OUJT
4.6 5.0
JL419
1 2 3
ON/OFF VSS
VOUT
NC
VIN
B+
R650 0 C318 100 C314 4.7
JL410
IC306
5V REG
C329 47
C334 4.7
C423 0.1
C335 47
C338 1
C/R_I N
FAN
CN203
2P FAN+ FAN1 2
JL348
C600 0.1
10
TO (5/5)
B+ B+ B+ B+
IC300
2.5V REG IC300 S-1170B25UC-OTKTFG
3.3 2.5
R356 0
B+ B+ B+
8
TO (2/5)
ON/OFF VSS
VOUT
GNDD
1 2
JL411
D
C433 4.7 B C302 100 16V
NC
VIN
C315 4.7 B
C324 22 6.3V
B+ B+ B+ B+
4
TO (1/5)
R300 0 JL407
JL413
B+
DT+3.3V DET_ANT
B+ B+
F30 1 0uH
B+
JL422 JL423
B+ B+ B+
9
TO (3/5)
C342 47 16V
GNDT
GNDD
4-21
4-22
POWER
DT-120 (4/5)
RDR-HXD870/HXD970/HXD1070
For Schematic Diagram Refer to page 4-4 for waveform. Refer to page 4-51 for printed wiring board.
10
11
12
13
DT-120 BOARD(5/5)
VIDEO DECODER
B+ C1004 1 R1018 330
2.5
C1010 7p 50V
C1018 7p 50V
5.0 2.0
R1001 47
1.8
R1034 680
C1026 1
STREAM_0
STREAM_1
STREAM_2
STREAM_3
STREAM_4
STREAM_5
STREAM_6
R1049 0
C1001 1
R1017 330
C/R_IN
5.0 1.8
C1066 1
C1068 1
C1070 1
C1072 1
C1074 1 C1076 1
R1033 680
C1025 1
B+ B+
3.3 1.5 3.3 1.5 3.3 1.5 1.1 0 0
JL1216
3.3 0.7 0.4 0.4 0.4 1.5 0.8 0.4
STREAM_7
C1009 7p 50V
C1017 7p 50V
DFBI
ROY6
DVDD1L
DVDD3G
DGND9
ROY7
DVDD3J
DGND10
DVDD3I
DVDD1N
DVDD1M
C1002 1
R1019 330
DVDD3H
DGND12
DGND11
DVDD1K
DGND8
BCLK8
FILD
ROY0
ROY1
ROY2
ROY3
ROY4
BCKM
RDEO
FDIO9
FDIO8
FDIO7
FDIO6
FDIO5
FDIO4
FDIO3
FDIO2
FDIO1
FDIO0
ROCK
ROY5
VBLK
FOCP
FCKQ
DYSI
FCSI
C1011 7p 50V
C1019 7p 50V
5.0 2.3
HD
VD
132 131 130 129 128 127 126 125 124 123 122 121 120 119 118 117 116 115 114 113 112 111 110 109 108 107 106 105 104 103 102 101 100 99
98
97
96
95
94
93
92
91
90
G_IN R1003 47
C1105 0.1
1.5 0
133 DVDD10 134 DYMI 135 DCGI 136 DCBI 137 DCRI 138 AVDD1 139 ATS1 140 ATS2 141 AVDD3A 142 ATS3 143 AGND1
DVDD3F ROY8 ROY9 ROY10 ROY11 ROY12 ROY13 DVDD1J DGND7 ROFDIE FCLK8 FCKM DVDD1I RGRED RSTB SLA0 SDA SCL
88
0.3
7 5 3 1
8 6 4 2
R1040 10k
R1035 680
C1027 1
F1003 EMI G
87
2.0
0 0 0
86 85 84 83
B+
C
C1003 1 R1020 330 C1012 7p 50V C1020 7p 50V
5.0 2.3
F1002
B_IN R1004 47
JL1011 O
B+
VCLK 82
1.5
81 80
3.3
C1086 1
5 TO (1/5)
EMI G
R1039 47k
JL1003
0.1
79 78 77
1.5
R1054 10k
R1036 680
C1028 1
C1042 220 4V
C1059 10 16V
1.4 1.5 0.8 1.1 0.8 1.9 0.9 2.4 0.8 3.3 3.3 0
144 AGND2 145 AGND3 146 VCLY 147 VCOM1 148 AVI 149 VLPF1 150 ASYI 151 VRB1 152 ACYI 153 VRT1 154 ACSI 155 AVDD3B 156 AVDD3C 157 VRT2 158 ASCI 159 VRB2 160 AGI 161 161 162 ACBI 163 VRT3 164 ABI 165 VRB3 166 VCOM3 167 AVDD3D 168 AVDD3E 169 VCOM4 170 ACRI 171 VLPF2 172 ARI 173 VRB4 174 VRT4 175 AGND4
76
3.3
C1043 0.1 C1044 16V 0.1 16V C1045 0.1 C1035 16V 0.1 16V C1046 0.1 C1036 16V 0.1 16V C1047 0.1 C1037 16V 0.1 16V C1061 1
75
3.2
74 73
3.2
B+
72
3.2
D
10 TO (4/5)
71
1.5
R1061 4.7k R1060 4.7k C1087 1 C1114 1 6.3V C1088 X6S 0.1 16V C1115 1000p 50V C1089 B 1 6.3V X6S F1006 O EMI G I
SDA_VDEC SCL_VDEC
IC1002
SDRAM IC1002 HY57V161610FTP-6DR-C
C1096 1
3.3 0.7 0.5
IC302
3.3V REG IC302 MM1563DFBE
JL639 R715 0
5.7 4.7 1.9
JL623
B+
JL636 JL621
IC1001
VIDEO DECODER IC1001 UPD64015AGM-UEU-A
DVDD1H AGNDA4 IOCR AVDDA3 AGNDA3 IOCB AVDDA2 AGNDA2 OYG AVDDA1 RSET REF AGNDA1 DVDD1G DGND6 XI XO DVDD3E SDRDQ15 SDRDQ0 SDRDQ14 SDRDQ1 DVDD1F SDRDQ13 SDRDQ2
70 69 68
3.3
50
IC319 S-1112B50MC-L7JTFG
JL638
5.7
VDD1 DQ0 DQ1 VSSQ1 DQ2 DQ3 VDDQ1 DQ4 DQ5 VSSQ2 DQ6 DQ7 VDDQ2 LDQM XWE XCAS XRAS XCS BA A10/AP A0 A1 A2 A3 VDD2
VSS2 DQ15 DQ14 VSSQ4 DQ13 DQ12 VDDQ4 DQ11 DQ10 VSSQ3 DQ9 DQ8 VDDQ3 NC/RFU UDQM CLK CKE NC A9 A8 A7 A6 A5 A4 VSS1
67 66 65
3.3
0.8 1.1
SDRDQ15 SDRDQ14
49
CN GND NC VO
VOUT
5.0
48
R719 33k
3.3
JL634 NC
JL704
4.7
47
2 3
C1048 0.1 16V C1049 0.1 16V C1050 0.1 C1038 16V 0.1 16V C1051 0.1 16V C1052 0.1 C1053 16V 0.1 16V
64 63 62
3.3
JL1004
0 0
SDRDQ2 SDRDQ3
0.7 1.2
R714 0
JL637
JL1005
0 0 0 0
61 60 59 58
1.5
46
45
44
7 8
43
C634 1 6.3V
E
V+1.5SW V+3.3SW
C623 1
B+
JL706
IC319
5V REG
42
C626 1
41
10
1.1 1.1
JL1006
0 0 0 3.3 3.3 0 0 0 0 0 0
SDRDQ6 C1103 0.1 16V X1001 24.576MHz R1053 1k C1092 1 C1095 7p 50V SDRWE C1117 SDRCAS 1000p 50V B SDRRAS SDRCS SDRA10 C1093 1 SDRABP SDRA0 SDRA1 SDRA2 SDRA3 C1099 1 C1094 7p 50V
40
11
B+
IC320
1.5V REG IC320 MM1561FFBE
R709 10k JL703
57 56
1.6
JL622
SDRDQ7 C1098 1
39
12 13
3.3
38
B+
I
0.2
F1001 EMI G O
JL1167
B+
55
1.6
37
14
54
3.3
3.2 3.1 3.1 2.9 0.2 0.2 0.2 0.2 0.2 0.4 3.3
36
15
P_CONT2
2.3
JL702
3.3
C1034 220 4V
1.5
C1062 1 C1063 0.1 16V C1040 C1041 C1039 1 1000p 0.1 16V C1054 0.1 16V C1055 0.1 C1056 16V 0.1 16V
53
0.9
1.6 3.3
SDRCLK SDRCKE
35
16
52
0.8
51
1.3
34
17
33
18
50
0.6
32
19
49
1.5
31
20
48
1.3
30
21
R720 10k
47
0.8
29
22
46 45
28
23
SDRDQ10
SDRDQ11
SDRDQ12
176 AGND5
DGND5
27
24
SDRDQ7
SDRDQ6
SDRDQ9
SDRDQ5
SDRRAS
SDRDQ8
DVDD1D
SDRDQ4
SDRCAS
DVDD1B
DVDD3C
SDRCLK
SDRA5
SDRDQ3
DVDD1C
DVDD1E
SDRWE
DGND3
DGND4
SDRA9
DVDD3D
SDRABP
DVDD3A
DVDD3B
DVDD1A
SDRCKE
SDRA10
SCKSET
DGND1
DGND2
SDRCS
SDRA8
SDRA7
SDRA6
SDRA4
SDRA3
SDRA2
SDRA1
SDRA0
TEST1
TEST2
26
25
1
3.3
3
0.2
5
0.1
6
0
7
0.1
8
0.3
10
0.3
11
3.3
12
0.3
13
0.3
14
0.3
15
0.2
16
1.5
17
18
0.2
19
0.2
20
2.9
21
3.3
22
3.1
23
1.5
24
25
1.7
26
3.3
27
1.5
28
3.1
29
3.2
30
1.0
31
1.2
32
1.5
33
34
1.1
35
1.2
36
1.1
37
1.2
38
39
1.5
40
1.1
41
1.2
42
1.2
43
1.2
44
3.3
B+
I F1005 I F1004 I GNDD EMI G C1082 220 4V C1080 C1079 1 1000p C1091 220 4V C1083 C1081 1 1000p C1065 1 C1067 1 C1069 1 C1071 1 C1073 1 C1075 1 C1077 1 C1078 1 O JL1008 EMI G O JL1009
B+
B+ B+
B+ B+
B+
V+3.3A
B+
C1119 220 4V
R1047 100
R1048 100
R1050 100
R1042 100 1 3 5 7
R1043 100 1 3 5 7
R1044 100 1 3 5 7
R1045 100 1 3 5 7
R1051 100
2 4 6 8
2 4 6 8
2 4 6 8
2 4 6 8 R1046 100
2 4 6 8
2 4 6 8
2 4 6 8
2 4 6 8
2 4 6 8 R1052 100
1 3 5 7
1 3 5 7
1 3 5 7
1 3 5 7
JL1223 JL1224 JL1230 JL1231 SDRDQ5 SDRDQ10 SDRDQ4 SDRDQ11 SDRDQ3 SDRDQ12 SDRDQ2 SDRDQ13 SDRDQ7 SDRDQ8 SDRDQ6 SDRDQ9
SDRA10
SDRA9
SDRA7
SDRA6
SDRA5
SDRA3
SDRA2
SDRA8
SDRA4
SDRA1
VIDEO DECODER
DT-120 (5/5)
4-23
SDRA0
4-24
RDR-HXD870/HXD970/HXD1070
For Schematic Diagram Refer to page 4-45 for printed wiring board.
7
ND201 FLUORESCENT TUBE DISPLAY
10
11
FR-274 BOARD
FL DRIVER, LINE 2 IN FUNCTION SW
P16 P15 P14 P13 P12 P11 P10 10G 11G 12G P9 P8 P7 P6 P5 P4 P3 P2 P1
JL269
JL275
JL284
JL250
JL260
JL272
JL274
JL276
JL280
JL238
JL234
JL235
JL241
JL242
JL245
JL251
JL265
JL270
JL236
JL237
JL239
JL252
JL253
JL271
JL273
JL278
JL244
JL258
JL263
JL243
JL246
JL248
JL262
JL268
JL277
JL279
JL240
JL261
JL249
JL264
JL259
JL247
SEG1 6
SEG1 5
SEG1 4
SEG1 3
SEG1 2
SEG1 1
SEG1 0
JL266
SEG9
JL267
SEG8
SEG7
SEG6
SEG5
SEG4
SEG3
SEG2
JL281
GRD1 0
GRD1 1
L201 100uH
B+
Q201 2SD1898T100R
DSC
JL223
GRD1 GRD2 GRD3 GRD4 GRD5 GRD6 GRD7 GRD8 GRD9
B
R209 10k C201 100 25V
D216 MM3Z6V2ST1
C216 22 50V
Q203 2SB1197K-T-146-R
11.8
12V SWITCH 11.8
GRD1 2
GRD1
GRD2
GRD3
GRD4
GRD5
GRD6
GRD7
GRD8
GRD9
B+
R217 10k C211 0.1 B
B+
-22.5 -22.5 -22.5 -22.5 -22.5 -22.5 -22.5 -22.5 -22.5
C222 0.01 16V B
JL224
11.1
4.9
VD D
GR3
VSS
GR8
GR4
GR5
GR6
GR7
GR1
JL254
1
GR2
GR9
SEG1
JL282
JL283
GRD10
R10.2/P0
6 9 R227 27k R215 5.6k
HDD
R231 2.2K
LED1 LED2 LED3 LED4 OSC DOU T DI N CLK STB K1 K2 VSS SG3 SG4 SG5 SG6 SG7 SG8 SG1 SG2 SG9
GR10 GR11
JL255 JL256
R4.9/P0
-22.5 -22.5 -22.5 -24.8 -22.3 -24.2 -17.8 -24.2 -24.2 -24.2 -17.8
GRD11 GRD12
R0/P5
R232 0
JL257
R233 100k R235 0
R0/P5
4 5
IC201
FL DRIVE
Q205 DTC124EUA-T106
LED DRIVE
R0/P3.9 R3.5/P0
2.8
6
0 4.9
Q206 DTC143TUA-T106
LED DRIVE
0
7
IC201 PT6315
0
8
4.9 4.9 0 0
Q204 MUN2213T1
SWITCH
C213 0.1
D214 SLI-343YC3F
DVD
VDD
-22.2
-22.3
-22.3
-22.3
SEG6 -16.3
SEG7 -22.3
SEG8 -10.2
SEG9 -10.3
SEG1
SEG2
SEG3
SEG4
C221 0.01 16V B CN201 TO FL-178 BOARD CN106 THROUGH THE FLR-010 FFC 5P JL201 KEY2 KEY1 IR GN D V +5F 5 JL202 4 JL203 3 JL205 2 JL204 1 R201 0 R222 0 R225 270
SEG5
-18.3
4.9
JL285
JL286
CN203
44
43
42
41
40
39
38
37
36
35
34 33 32
2 3 9 10 11
31 30 29 28 27 26 25 24 23
16
17
18
19
20
21
22
12
13
14
15
17P
JL20 6 17 JL20 7 16 IR V+12RI E V +5F GND FLDATA FLCLK FLSTB GND HDD2 A_TV D_TV DITV PLTV KEY1 KEY2 KEY3 TO AV-114 BOARD(1/5) CN105 THROUGH THE FAR-007 FFC FLPO N
B+ B+ B+ B+
JL20 8 15 JL20 9 14 JL21 0 13 FLD T FLCK JL21 1 12 JL21 2 11 JL21 3 10 JL21 4 9 JL21 5 8 JL21 6 7 JL21 7
E
R206 0 R207 0
D202 STZ6.8N-T146
FLSTB
D203 STZ6.8N-T146
R228 10k
R238 10k
R243 10k
S201
PROGRAM
S203 S208
JL22 2 1
CH+ OPEN/CLOSE
R229 2.2k S204
REC_STOP
R239 2.2k S209 R244 2.2k
F
VIDEO 7 8 L(MONO) AUDIO R 9 10 11 13 12 FB201 0uH R213 0 FB202 0uH
D205 STZ6.8N-T146
2Y
JL228 JL229
INPUT_SELECT
R230 2.2k S213 R240 2.2k
2V
JL230
HDD
R241 3.3k
PLAY
S211 R246 3.3k
JL231 JL232
7 8 9 10 11
FAR-006 FF C
SIGNAL PATH
VIDEO SIGNAL CHROMA REC Y Y/CHROMA AUDI O SIGNAL
D206 STZ6.8N-T146
2R
JL233
R248 3.3k
S207
R242 5.6k
STOP
DVD
REC
G
C204 220p C206 220p
D207 STZ6.8N-T146
PB
R218 220k
R220 220k
4-25
4-26
RDR-HXD870/HXD970/HXD1070
For Schematic Diagram Refer to page 4-59 for printed wiring board.
FL-178 BOARD
DV,USB,REMOCON,RECEIVER,POWER,SW
CN101 6P JL101 TPB N TO RD-065 BOARD(6/7) CN5101 THROUGH THE RV-003 HARNESS TPBP GND GND TPAP TPAN 6 JL102 5 FL101 0uH
JL103 4 3 JL104 2
JL105
TPBTPB+ TPATPA+
4 3 2 1
CN103 4P
DV IN
B
3 4
FL102 0uH
IC101
REMOTO CONTROL RECEIVER
C102 1
L104 0uH
IC101 GP1UM27XK0SF
R109 33
4.9
D2
VFB
1
4.9
GND
OUT
VCC
CN102 10P USBDP 1 GND USBDM 1 TO RD-065 BOARD(6/7) CN5201 THROUGH THE RV-001 HARNESS GND GND V+5USB USBVFB USBDM 2 1 2 3 4
3 JL108 JL107 JL106 VDR102 VDR104 L105 0uH JL110 5 JL109 6 JL112 7 8 JL111 9 10 C101 1 R104 33 L103 0uH R108 33 R105 33
USB B type
CN106 5P 1 2 KEY2 KEY1 IR GND V +5F TO FR-274 BOARD CN201 THROUGH THE FLR-010 FFC
D+
GND
R113 0
JL119 3 JL121 4
B+
R112 0 CN104 4P
JL120 5
DD+ GND
B+
L102 0uH
V+5
USBDP 2 GND
4-27
4-28
RDR-HXD870/HXD970/HXD1070
For Schematic Diagram Refer to page 4-55 for printed wiring board.
10
RD-065 BOARD(1/7)
POWER BLOCK
-REF.NO.: 20,000 SERIESB+
C 4507 100 16V C 4501 1 6.3V X6S C 4535 1000p 50V B TP4504 C 4508 220 4V C 4502 1 6.3V X6S C 4536 1000p 50V B TP4506 SW+1.53V SW+1.53V TO SWITCHING REGURATOR CN201 THROUGH THE PR-076 HARNESS GND D SW+3.33V SW+3.33V GND D V +12V GND V+5M GND M V12M 3 4 5 6 7 8 9 10 11 TP4514 12 TP4512 13 TP4513 I C4501 2.5A 32V C 4516 10 16V TP4571 R4501 0 TP4501 C 4539 1000p 50V B C 4509 220 4V C 4537 1000p 50V B C 4503 1 6.3V X6S TP4508 C 4504 0.1 16V F TP4509 TP4507 TP4505 TP4502 TP4503 C 4511 4.7 6.3V B V +1R0
B+ B+ B+ B+ B+ B+ B+
A
CN4501 13P 1 2 EV+5.8 V GND D
B+
IC4561 S-1112B50MC-L7JTFG
TP4565
VI N GND CONT
VOUT
B+
IC4511 S-1170B33UC-OTSTFG
3 4
NC VSS ON/OFF VOUT VI N
IC4511
3.3V REG
C 4562 1 6.3V X6 S
B+
V+5HD
1
TO (2/7)
NB
R4511 0
IC4561
5V REG V+3HD V+1R5_IN V +12A V+3D
B+
B+
C 4524 4.7 6.3V B C 4513 4.7 6.3V B TP4608
IC4562 S-1112B33MC-L6STFG
TP6096
P_CONT2
V+3D
B+
VI N GND CONT
VOUT
B+ B+ B+ B+ B+ B+ B+
D4521 RB501V-40TE-17
NB
B+
TP4510
TP4511
IC4521 S-1170B25UC-OTKTFG
3 4
IC4521
2.5V REG
B+
IC4562
3.3V REG
2
TO (3/7)
C 4526 15k
B+
C 4540 1000p 50V B
V +2R5 R4504 2.7k R4505 2.7k R4507 2.7k C 4522 1 6.3V X6S C 4525 4.7 6.3V B
IC4571
B+
R4574 0 R4573 0 1.8V REG
D4571 RB501V-40TE-17
TP4569
R4575 0
GNDA V+1R8
B+
TP4572 TP4609
V+1R5_IN V +1R0
B+
V+3D V +2R5
B+
B+ B+
IC4531 MM1701WHBE
CONT NC2 NC3 VI N CN GND NC1 VOUT C 4532 0.01 16V B C 4534 10 10V C C 4533 1 6.3V X6S
3
TO (4/7)
IC4571 S-1132B18-U5T1G
R4531 0
C
C 4531 1 6.3V X6S
1.0V REG
ON/OFF
VI N
IC4531
C 4571 4.7 6.3V B
5 C4572 220 4V
B+ B+
VOUT
VSS
NC
V+3D
4
TO (5/7)
B+ B+
TP4610
B+ B+ B+ B+
B+
TP4567 R5445 0
B+
R4581 100
TP4570
B+
V +12A
V+3HD V+5HD
IC4541 MM1563DFBE
R4541 0
5
TO (6/7)
CONT SUB VI N
B+ B+ B+ B+ B+ B+
V+5D
Q4581 2SC4081T106R
RIPPLE FILTER
EV+5.8V
B+
7
R4559 0 C 4541 1 6.3V X6S
GND NC VO
L 4551 10uH
V+5_AO
R4552 0
V+5_AIN
B+ B+ B+ B+ B+
R4554 0
IC4541
3V REG
V+5_VI
V+5L V+5M
R4553 0
6
TO (7/7)
V+5_VO
V+12M
B+
D4552 RB501V-40TE-17
R4556 0
V+5L GND M
IC4552
5V REG
IC4552 S-1170B50UC-OUJTFG
ON/OFF VSS NC VIN C 4556 4.7 6.3V B VOUT C 4558 100 16V TP4568 C 4559 100 16V C 4553 1000p 50V B
R4558 22k
Note :
The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.
4-29
4-30
POWER BLOCK
RD-065 (1/7)
RDR-HXD870/HXD970/HXD1070
For Schematic Diagram Refer to page 4-55 for printed wiring board.
10
11
12
13
14
RD-065 BOARD(2/7)
EMMA BLOCK
A
-REF.NO.: 20,000 SERIESL 1831 L 1821 R1802 220 I C 1802 2.2 10V B L 1801 39uH C 1804 330p 50V C 1801 1 6.3V X6S R1804 33 R1803 330 C 1814 150p 50V O EM I G I C 1812 2.2 10V B C 1811 1 6.3V X6S L 1811 15uH C 1813 100p 50V R1814 33 R1813 330 R1812 220 C1044 2p C1045 2p 1p AEP,UK AUS
B+ B+ B+
B+
1p C1045 C1044
IC1301 NJM12904V(TE2)
IC1302 NJM12904V(TE2)
IC1301
VREF V OUT C 1315 2.2 10V B C1312 0.1 16V F R1312 1k 0.5%
B+
B+
O EM I G
* 50V
CK
* 50V
CK
IC1302
VREF D OUT
+ -
+ -
SIGNAL PATH
VIDEO SIGNAL CHROMA REC Y Y/CHROMA AUDI O SIGNAL
Q1811 ISA1602AM1TP-1EF
FSC BPF X 1001 24.576MHz X 1002 27MHz R193 0 R114 33k X101 16.9344MHz
R1302 1k 0.5%
VREF_D VREF_D
VREF_D
A T/XDT AT/XDT
TP1202 R1303 1k 0.5% C 1303 0.1 16V F C 1316 10 10V C R1313 1k 0.5% R1314 0 C 1313 0.1 16V F
PB
7
TO (4/7)
1080P
TXD0_LL
RXD0_LL
XDVI
SPDIFSEL
10
TO (3/7,4/7)
XRESET
AOD0
AOBCK
DACCLKO
JTC L
EDIN T
JTMRS T
JTMS
JTDO
JTDI
R1013 10k
R5856 10k
SMCKOUT
ADCCLKO
AOLRCK
NSCS
AILRCK0
SMDOUT
SPDIFO
RXD1
AIBCK0
SMDIN
AIBD0
TO (3/7,4/7,5/7,7/7)
1080P R1030 100 R1031 220 150 AEP,UK AUS 1080P XDVI XDVI TXD0_LL SCL_VDEC RXD0_LL SDA_VDEC
11
TO (6/7)
VIOCLK
VIOD7
VIOD6
VIOD5
VIOD4
VIOD3
VIOD2
VIOD1
VIOD0
* *
AIOBCK
R1029 82
R1030
R1068 47k
R1031
B+
R1001 10k
R1181 10k
AIOLRCK
AIOBD
47
K2
AG23
AG22
K20
K23
AF1
G2
AC20
AB21
AF21
L20
L21
H19
H20
G19
H21
L24
M24
L1
AE1
D18
SP1ERRB/GPIO20 AD20
AF22
J19
F21
CN470 1 28P
J21
J22
J24
AD23
AD24
AB22
AC22
AC24
AE20
AE24
AA20
AF24
AB20
AE21
AF23
Y19
L3
K5
L4
L5
AOBCK C19
AIOMCK0 C20
AOD0 E18
E20
AIBCK0 E19
AIOMCK1 E21
ATX D19
D20
AILRCK0 F19
K4
K3
28 R4732 4.7k R4707 10k 27 26 25 24 TP6045 23 TP6048 22 21 TP6103 20 19 C 4701 1 6.3V X6S C 4704 1000p 50V B
AT/XDT GND SDA_VDEC SCL_VDEC GND TX1 RX1 GND XRESET GND(RFE/XLL) GND VCLKI GND STREAM_7 STREAM_6 STREAM_5 STREAM_4 STREAM_3 STREAM_2 STREAM_1 STREAM_0 GND ALRCKI ADATA ABCKI GND SPDIF GND TO DT-120 BOARD CN104 THROUGH THE FVR-001 FFC
HCBP
HLCO
JTMS
JTDO
FCBP
FSCO
XA2
TXD0B
CLK24OUT
CLK27AOUT
RXD0B
JTCL
HLCI
CLKPWM1/VIFLD/GPIO61
AIOLRCKSP0ERRB/GPIO30
AIOBCK/SP0CLK/GPIO31
SMCKOUT/SS0CKIN
SP0REQB/GPIO33
SMDOUT/SS0DOUT
CLK24IN
RXD1B/GPIO38
AOLRCK
JTRST
AIOBD/SP0STRT/GPIO32
VIOD7/SP0DAT7/GPIO29
VIOD6/SP0DAT6/GPIO28
SP1CLK/SS1CLK/GPIO08
VIOD5/SP0DAT5/GPIO27
VIOD4/SP0DAT4/GPIO26
VIOD3/SP0DAT3/GPIO25
VIOD2/SP0DAT2/GPIO24
VIOD1/SP0DAT1/GPIO23
VIOD0/SP0DAT0/GPIO22
VIOCLK/SP0EN/GPIO21
SP1EN/SS1EN/GPIO09
RSTSWB
DCD0B/SS0SB/GPIO47
CLKPWM0/GPIO60
CLK27BIN/GPIO6
CLK27AIN
TXD1B/GPIO39
CN1401
SMDIN/SS0DIN
AIBD0
NMI
EDINT
JTDI
FSCI
XA1
IC4702
BUFFER V19 U19 F17 D24 C23 C24 F24 G21 F22 G23 H22 G22 E22 D21 C101 7 0.1 10V B C 1016 0.1 10V C101 5 B 0.1 10V B C 1035 0.1 10V C103 3 B 0.1 10V B C 1032 0.1 10V C102 9 B 0.1 10V C 1030 B 0.1 10V C103 1 B 0.1 10V B C 1047 0.1 10V C103 4 B 0.1 10V B C 1018 0.1 10V C101 9 B 0.1 10V B C 1020 10 16V ADPOW AMUTE VIOCLK R4723 47 C 4705 1000p 50V B
IC4702 TC7SZ08FU(TE85R)
VCC INB IN A OUTY GND
R4713 10k
DINTEN
(FOR CHECK)
SP1STRT/SS1STRT/GPIO10 SP1REQB/SS1ERRB/GPIO11 SP1DAT0/SS1DAT/GPIO12 SP1DAT1/SS0CLK/GPIO13 SP1DAT2/SS0EN/GPIO14 SP1DAT3/SSOSTRT/GPIO15 SP1DAT4/SS0ERRB/GPIO16 SP1DAT5/SS0DAT/GPIO17 SP1DAT6/GPIO18 SP1DAT7GPIO19
VIVSB/RTS0B/GPIO36 VIHSB/CTS0B/GPIO37 CSYNC/GPIO54 VRBB VCOMB VRTB VRBR VCOMR VRTR VRBC VCOMC
1 2
3
R4729 0
R1405 TP1405 22
JTCL
AE22 AE23
IC4701 TC74VCX245FK
20
VCC OE B1 B2 B3 B4 B5 B6 B7 B8 DIR A1 A2 A3 A4 A5 A6 A7 A8 GD
R4721 100 VIOD7 VIOD6 VIOD5 VIOD4 VIOD3 VIOD2 VIOD1 VIOD0 X525P GI BI C/RI YI R4722 100
19 18 17
2 3 4
B+
R1412 10k R1411 10k R1413 47k C 1401 0.01 16V B
16
B+
E
CN1402 7P TP1410 TXD RXD DTR 1 TP1412 2 3 TP1425 4 TP1426 V+5D GNDD XRESET 5 TP1427 6 TP1428 7 TP1413 TP1411
R1421 10k
R1422 10k
RXD
(FOR CHECK)
CTS
B+
232RST
C122 2200p 50V C125 1 6.3V C127 X6S 0.047 10V B C128 0.1 10V C129 1 6.3V X6S R109 6.2k C130 4.7 6.3V 2012 C131 0.068 10V C133 B 0.1 10V B C134 0.1 10V B R110 1k
AF15 AG15 AF18 R116 3.3k R119 0 AH19 AG19 AJ17 AJ18 AF16 AF17 AG14 R124 0 C135 0.01 16V B T P131 AF14 AH18 AG18 AE17 AE16 AE18 AF13 AG11 AE15 AE14 AE12 AE13 AF12 AG12
15
CBPD CBBD CEQDC CDEF2 CDEF CEQ REQ C CAG CAGC2 CMIRR CAMIRR AGCIN RFO CRC CTEC CBHLPP/CRAPC CBHWBL/CID CREG CBC CAD CWAGC CWHP CADO CBCO
14 13
7 8
VRTY D22 VCLY CTS1B/TTXRQ/GPIO41 ABI ARI ACI AYI COMP1 COMP0 E23 AB19 D23 F23 G24 E24 B20 B24 B22 A21 A23 A24 B23 A22 B21
12 11
9
R4704 0 R4705 0 R4706 0 R4702 100
10
IC4701
BUFFER
IC4703 TC74VHC125FK
14
VCC 4G 4A 4Y 3G 3A 3Y 1G 1A 1Y 2G 2A 2Y GND
R4714 0
C136 0.1 10V C137 B 6800p 16V C144 0.01 16V C145 B 0.01 16V B C146 10 10V C147 C 0.33 6.3V B C148 0.33 6.3V C155 B 0.47 6.3V B C156 1800p 50V C157 0.01 16V B C158 0.01 16V B
IC1001
AV ENC/DEC
VREF
(1/5)
C 1001 0.1 10V B C1002 0.1 10V C1006 B 1 6.3V R1003 X6S 680 0.5% R1004 470 0.5% PB/BOUT Y/GOUT PR/ROUT COUT YOUT
13
IC4703
BUFFER AIOBCK R4726 22
12 11 10 9 8
3 4 5 6 7
IC1001 MC10050F1-105-LU1-A
AIOBD AIOLRCK
R4725 22
VAY A20
R4712 10k
R4711 10k
R4710 10k
B+
SPDIFO_LL
AGND Y14 AG13 AJ16 AH15 AJ15 AH14 AJ14 C120 0.1 10V B C100 1000p 50V B C101 1000p 50V B AH13 R105 0 AJ13 AH17 AH16 T P117 T P118 AG16 AG17 WALPF EXTR PCEFM2 PCEFM1 FCEFM2 FCEFM1 ASY EFM RFI_P RFI_M RFEQOM RFEQOP AGND Y13 AGND Y12 AD16 AVDD33 AD15 AVDD33 AD14 AVDD33 AD13 AVDD33 AD12 AVDD15 DLL_GND DLL_VDD DA2_GND DA1_GND DA2_VDD3 DA1_VDD3 T P119 AF20 T P122 AF19 T P123 AE19 TEO/LE/SWRF1/SWRF3/RFP6 FEO/LE/SWRF2/SWRF4/RFP5 ADIN/LE/RFP4 AD2_GND AD1_GND AD2_VDD3 AD1_VDD3 PH_GND PH_VDD1 HC_VDD3 PF_GND PF_VDD1 M6 L6 A19 C22 B19 C21 H24 L 1024 M23 H23 L23 L22 J20 K21 J23 K24 K22 C 1041 C 1040 C 1039 1000p 1 100 50V 6.3V 4V X6S TP1001 C102 5 C1024 C1026 1 100 1000p 6.3V 4V 50V X6S C 1005 C 1004 C 1003 1000p 1 100 50V 6.3V 4V X6S O EMI G I L1023 O EMI G I R271 0 R274 0 C103 220 4V C104 1 6.3V X6S C106 0.1 16V F C105 1000p 50V B C152 1000p 50V B C159 0.1 16V F C154 1 6.3V X6S C153 10 16V L 1004 O EMI G I R273 0 Y/GOUT YOUT YOUT COUT
G
IC1001-AJ2
C107 680p 50V R104 B 12k C113 4700p 50V C114 4700p 50V C115 0.01 16V B C116 0.1 10V B C117 1000p 50V B
B+ B+ B+
COUT PR/ROUT PR/ROUT Y/GOU T PB/BOUT PB/BOUT YI YI C/RI C/R I BI BI GI GI X525P X525P AMUTE AMUTE ADPOW ADPOW ADCCLKO ADCCLKO DACCLKO DACCLKO AILRCK0 AILRCK0 AIBCK0 AIBCK0 AIBD0 AIBD0 AOLRCK AOLRCK L1025 O EMI G I AOBCK AOBCK AOD0 AOD0 SPDIFO SPDIFO SMDIN SMDIN SMDOUT
9
TO (7/7) GNDS
Q102 RT1N141U-TP-1
SWITCH
B+
C1051 10 10V C
C1052 1 6.3V X6 S
C163 220 4V
B+
12
TO (3/7)
B+
TP6119 AD19 MONI2/RFPM2 TP6120 AC19 MONI3/SWRF4/RFPM3 M10 TEST_MODE M11 FPIND M12 AD17 LVSPOWD
B+
DVDD10(1.0V)
DVDD10(1.0V)
DVDD10(1.0V)
DVDD10(1.0V)
DVDD10(1.0V)
DVDD10(1.0V)
DVDD10(1.0V)
DVDD10(1.0V)
DVDD10(1.0V)
DVDD10(1.0V)
DVDD10(1.0V)
DVDD15(1.5V)
DVDD15(1.5V)
DVDD15(1.5V)
DVDD15(1.5V)
DVDD25(2.5V)
DVDD25(2.5V)
DVDD25(2.5V)
DVDD25(2.5V)
DVDD25(2.5V)
DVDD25(2.5V)
DVDD25(2.5V)
DVDD25(2.5V)
DVDD25(2.5V)
DVDD25(2.5V)
DVDD33(3.3V)
DVDD33(3.3V)
DVDD33(3.3V)
DVDD33(3.3V)
DVDD33(3.3V)
DVDD33(3.3V)
DVDD33(3.3V)
DVDD33(3.3V)
DVDD33(3.3V)
DVDD33(3.3V)
DVDD33(3.3V)
DVDD33(3.3V)
DVDD33(3.3V)
TEST1
FC_VDD3
B+
L1005 15uH TP1002
B+
SMDOUT SMCKOUT SMCKOUT NSCS NSCS RXD1 RXD1 JTRS T JTRST RXD RXD
W10
M13
M14
M15
P10
P11
P12
R10
R11
N24
N10
N11
N12
N13
B+ B+ B+ B+ B+ B+ B+ B+ B+ B+
L 1001 O EM I G I L 1002 O EM I G I
N14
L10
T10
T11
L11
L12
L13
L14
L15
K10
K11
Y10
Y11
K12
K13
K14
K15
F12
F13
F14
F15
F16
F10
F11
AA6
AB6
W6
P6
R6
N6
U6
G6
G7
H6
J6
A1
V6
Y6
K6
K1
T6
L2
F7
F8
F9
PLL_GND
PLL_VDD
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
DGND
B+ B+
B+ B+
L 1021 O EMI G I
232RST 232RST
1
TO (1/7)
C1009 220 4V
C1010 1 6.3V X6 S
C1007 220 4V
C1008 1 6.3V X6 S
C1012 100 4V
C1013 1 6.3V X6 S
C1049 C104 8 C 1050 C 1038 C 1037 C 1036 C 1023 C 1022 C 1021 100 1000p 1000p 1 1 1 10 100 1000p 4V 4V 50V 6.3V 50V 6.3V 50V 6.3V 10V X6S X6S X6S C
EMMA BLOCK
RD-065 (2/7)
4-31
4-32
RDR-HXD870/HXD970/HXD1070
For Schematic Diagram Refer to page 4-55 for printed wiring board.
10
11
R2501 680
RD-065 BOARD(3/7)
A
VIDEO/AUDIO BLOCK
-REF.NO.: 20,000 SERIESYOUT R2502 150 0.5% C250 2 1 6.3V X6S R2504 680
Y_OUT
Q2501 ISA1602AM1TP-1EF
VIDEO BUFFER
IC3201
AUDIO DAC
C_OUT
R2304 0 YP_OUT
CN2301 TP2304 40 X525P YP_OUT GND CR_OUT GND CB_OUT GND Y_OUT GND TP2301 39 38
40P
B+
R3201 47
1
IC3201 PCM1742KE
16
Q2502 ISA1602AM1TP-1EF
VIDEO BUFFER R2505 150 0.5% R2506 0 R2507 680 YP_OUT Y_OUT R3310 TP2305 CR_OUT TP2302 C250 3 1 6.3V X6S
* MARKED:MOUNTED TEBLE
C3303 C3304 C3305 C3311 C3312 C3313
AEP,UK
AUS 5p/50V 68p/50V 15p/50V 7p/50V 7p/50V 10u/10V 7p/50V 7p/50V 5p/50V 68p/50V 15p/50V 10u/10V 7p/50V 7p/50V 5p/50V 68p/50V 15p/50V 10u/10V 5p/50V 68p/50V 15p/50V 1u/50V 1u/50V 1u/50V 1u/50V 1u/50V 1u/50V 18uH 10uH 18uH 10uH 18uH 10uH ISA1602AM1TP-1EF 2SC4154TP-1EF ISA1602AM1TP-1EF 2SC4154TP-1EF ISA1602AM1TP-1EF 2SC4154TP-1EF 47 5.6k 0.5% XX 470 0.5% 5.6k 0.5% 10 330 470 0.5% 10 330 470 0.5% 5.6k 0.5% 5.6k 0.5% 10 47 XX 47 XX 330
R3228 10k
37 36 CB_OUT TP2303 35 34
15p/50V 82p/50V 22p/50V XX XX 0.01u/50V XX XX XX XX XX 0.01u/50V XX XX XX XX XX 0.01u/50V XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX 0 1.8k 0.5% 10k XX XX XX XX XX XX XX XX XX XX XX 0 10k 0 10k XX
R3202 47
2
R3203 47
14 3
B
V+3D V+5_AO
R3208 47
13 4
*
TP2306
33 32 31
B+ B+
R3230 0
5 6 7 8
Q2503 ISA1602AM1TP-1EF
R2508 150 0.5% VIDEO BUFFER C250 4 1 6.3V X6S R2510 680
D3201 DAN202uT106
C 3206 0.1 16V F
R3204 0 SMDOUT
*
TP2307
C_OUT GND Y_IN GND C/R_IN GND G_I N GND B_IN GND L_OUT GNDA R_OUT AMUTE R_IN GND L_IN GND P_CONT2 MRST XRST1 DAM_TO_T HSM_TO_T DAT_TO_M ASCK HST_TO_M TO AV-114 BOARD (1/5) CN101 THROUGH THE F RA-006 FFC
12 11 10 9
C3314 C3315 C3316 C3317 C3318 C3319 C3320 C3321 C3322 C3323 C3324 C3325 C3329 C3330 C3331 C3333 C3334 C3335 C3339 C3340 C3341 L3303 L3304
AMUTE
R3209 100k
SMDOUT AMUTE1
*
R3336
C 3219 220 4V
C 3207 47 6.3V
*
R3232 0 R3341 R3342
Q2504 ISA1602AM1TP-1EF
VIDEO BUFFER B_IN C250 5 1 6.3V X6S R2513 680 CR_OUT RCHOUT AMUTE1
GNDA
* *
TP3201
TP3202
LCHOUT
C
2
TO (1/7)
B+ B+
PR/ROU T
B+
Q2505 ISA1602AM1TP-1EF
R2514 150 0.5% C 2506 10 10V C VIDEO BUFFER
RCHIN
B+ B+
R3224 100 LCHOUT
LCHI N
TP2317 15 R2301 3.3k 14 TP2319 13 TP2320 12 TP2321 11 TP2322 10 R3004 0 0 0 0 0 0 0 0 0 TP2323 9 TP2324 8 TP2325 7 TP2326 6 TP6105 5 DSDA CEC DSCL DDC_SW1 HDP TP6106 4 TP6107 3 TP6100 2 TP6108 1
B+
R3218 22k 0.5% R3210 1.2k 0.5% R3211 10k 0.5% C 3216 82p 50V
7 2
B+
RCHOUT
IC3202 UPC4558G2-E1
Q3302 2SC4154TP-1EF
Y EQ C 3307 10 10V C C 3332 1 6.3V X6S R3309 680 R3308 10 R3307
C 3302 7p 50V
C3301 7p 50V
R3305 330
R3720 0 R3002 0
R3222 6.8k
5
D
V +12A
R3221 100
IC3202
AUDIO LPF
YI
R3006 R3003 R3007 R3008 R3009 R3010 R3011 R3012 C2305 1 6.3V X6S
*
Q3301 ISA1602AM1TP-1EF
Y EQ
B+
R3220 100 C3312 C3311
Q3304
R3213 680 R3214 6.8k R3215 22k C 3211 100 16V C 3212 0.1 16V F C 3218 C 3217 0.1 100 16V 16V F C/RI GNDD C3313 R3315 680
*
C3333
*
L3303
*
L3304 R3312
R3344
* *
Q3303
C3339
* *
R3314
*
R3313
*
C3329 C3330
*
C3331
*
C3314
*
C3315
*
R3317
TP2327
TP2329
TP233 1
TP2328
TP2330
IC3101 A K5358AET-E2
RCHIN LCHI N
R3101 0
16
IC3101
AUDIO ADC GI
15
Q3306
*
C3334
* *
L3305
*
L3306 R3318
* *
Q3305
TU_HPD C3340 TU_HPD DDC_SW 1 DDC_SW 1 G_IN TU_DSCL R2316 10k TU_DSCL TU_CEC TU_CEC TU_DSD A TU_DSDA
Q3307
R3102 0
2
*
C3319
R3319 R3324
*
C3316 C3317
*
C3318
13
TO (6/7)
B+
C 3105 0.1 16V F
R3113 10k
14 3 4 5 6
*
R3103 0 R3107 47 ADPOW AIBCK0 R3111 0 C3335 ADCCLKO BI AILRCK0 C3325 AIBD0 R 3106 10k
R3320 680
*
C3320
*
C3321
*
R3322
Q3308
14
TO (4/7)
13 12 11
* * *
R3327 680 R3326
* *
L3307
*
L3308 R3323
* *
Q3307
R3104 0 R3108 47
*
B_IN X525P SPDIFO BI GI C/RI YI PR/ROUT PB/BOUT Y/GOU T COUT YOUT AMUTE SMDOUT SMCKOUT NSCS DACCLKO AOBCK AOD0 AOLRCK AIBD0 AILRCK0 ADCCLKO AIBCK0 ADPOW SPDIFO_LL SMDIN RXD1 RXD JTRST 232RST SPDIFO BI GI C/RI YI PR/ROUT PB/BOUT Y/GOUT COUT YOUT AMUTE SMDOUT SMCKOUT NSCS DACCLKO AOBCK AOD0 AOLRCK AIBD0 AILRCK0 ADCCLKO AIBCK0 ADPOW SPDIFO_LL S MDIN RXD1 RXD JTRST 232RST
XRST1
R3325
*
C3322 C3323
*
C3324
R3109 47
9 8
10
R3105 1M
B+
IC3707 PST3813UL
4 C 3108 220 4V SPDIFSEL C 3107 1 6.3V X6S C 3106 1000p 50V C3738 1 6.3V R3715 0 3 GND NC OUT VDD 1 R3716 33 2
10
TO (2/7,4/7)
IC5701
SELECT 232RST
IC3707
MRST
12
TO (2/7)
IC5701 TC74VHC00FT(EKJ)
JTRST
1
B+
14
R5705 0
1A 1B 1Y 2A 2B 2Y GND
VCC 4B 4A 4Y 3B 3A 3Y
TO (2/7,4/7,5/7,7/7)
IC3701 TC7WH34FU(TE12R)
DAT_TO_M
1 8
SPDIF O
13
2 3
1A 3Y 2A GND
VCC 1Y 3A 2Y
R5702 470
12
SMDI N
4
11
HST_TO_M
3 6
SPDIFO_LL
5
Q5701 2SC4154TP-1EF
DIGITAL OPUT L5701 0uH R5701 470 R5703 680 R5704 150 R5706 75 0.5% C 5704 1 50V R5707 100k TP609 4 TP609 5 JA5701
10
IC3702 TC7SH08FU(T5RSOYJF)
1 2 3 5
SIGNAL PATH
VIDEO SIGNAL CHROMA REC Y Y/CHROMA AUDI O SIGNAL
RXD1
IC3701
BUFFER
B+
C 5708 220 4V
PB
IC3702
AND GATE
4-33
4-34
VIDEO/AUDIO BLOCK
RD-065 (3/7)
RDR-HXD870/HXD970/HXD1070
For Schematic Diagram Refer to page 4-55 for printed wiring board.
10
11
12
13
RD-065 BOARD(4/7)
MEMORY BLOCK
A
-REF.NO.: 20,000 SERIESB+
IC1001 (2/5)
AV ENC/DEC
IC1001 MC10050F1-105-LU1-A
IC201
MD 0 MD 1 MD 2 MD 5 MD 0 C280 1 6.3V X6S C287 1 6.3V X6S R319 33 FLASH ROM
MD0 MD1 MD2 MD3 MD15 MD4 MD5 MD14 R318 33 C285 1 6.3V X6S MD13 MD6 MD7 MD8 MD12 MD11 MD9 MD10 MD11 MD10 R317 33 C290 0.1 16V F MD 9 MD12 MD13 MD14 MD 8 MD15 MA0 C284 1 6.3V X6S R281 0 CAS Z UDQ M MCLK MCKE C291 1000p 50V B MA11 RAS Z MA2 MA5 MA11 MA 9 MA 8 MA 7 MA 6 MA 5 MA 4 MA6 MA3 MA4 MA7 MA10 MA9 MB A MA8 MA1 R204 33 R205 33 R206 33
R253 10k
R252 10k
R248 10k
R256 10k Y3 AA4 AB1 AA5 AB3 AA3 W4 Y4 W5 W3 TP160 Y5 Y2 AC2 AB5 AA1 Y1 AE3 AD3 AF3 AE5 AE4 MD0 MD1 MD2 MD3 MD4 MD5 MD6 MD7 MD8 MD9 MD10 MD11 MD12 MD13 MD14 MD15 MA0 MA1 MA2 MA3 MA4 MA5 MA6 MA7 MA8 MA9 MA10 (PB2) MBA UDQM LDQM MCLKOUT MCKE WEB RASB CASB DADD00 DADD01 DADD02 DADD03 DADD04 DADD05 DADD06 DADD07 DADD08 DADD09 DADD10 DADD11 DADD12 DQ00 DQ01 DQ02 DQ03 DQ04 DQ05 DQ06 DQ07 DQ08 DQ09 DQ10 DQ11 DQ12 DQ13 DQ14 DQ15 DQ16 DQ17 DQ18 DQ19 DQ20 DQ21 DQ22 DQ23 P20 Y20 Y24 AA22 W23 V23 Y23 V21 AA23 Y22 P22 U22 P23 U21 U20 AB24 R24 M21 N21 T23 R22 W20 RADD21 DBA0 DBA1 DCKE DCLK DCLKB DVREF DIHM DILM P24 M20 N19 R1199 10k P19 W21 Y21 AA21 U23 V22 T24 U24 N23 R23 M22 RDATA09 T22 T21 P21 N22 N20 R21 R1018 0 R1019 0 W22 FOEB/GOEB AA24 FWEB/GWED RDATA10 RDATA11 RDATA12 RDATA13 RDATA14 RDATA15 RADD22 RADD23/GPIO02 RADD24/GPIO03 RADD25/GPIO04 RDATA00 RDATA01 RDATA02 RDATA03 RDATA04 RDATA05 RDATA06 RDATA07 RDATA08 IR_OUT/GPIO53 FB/TTX/RTS1B/GPIO40 GCSB0 GCSB1 GCSB2/GPIO5 GCSB3/GPIO6 GRDYB/GPIO7 FCSB1 FCSB0 F18 AA19 V20 JL999 T20 JL997 R19 T19 R20 W24 JL998 V24 SFSCK SFSI SFSO SFCS0B AD9 AD10 AD8 AD11 RADD00/GPIO01 RADD01 RADD02 RADD03 RADD04 RADD05 RADD06 RADD07 RADD08 RADD09 RADD10 RADD11 RADD12 RADD13 RADD14 RADD15 RADD16 RADD17 RADD18 RADD19 RADD20 DQ24 DQ25 DQ26 DQ27 DQ28 DQ29 DQ30 DQ31 DCS0B DCS1B DRASB DCASB DWEB DDQM0 DDQM1 DDQM2 DDQM3 DDQS0 DDQS1 DDQS2 DDQS3 B4 A4 C5 B5 E1 E2 D1 D2 D3 E4 C4 D4 E5 F5 F4 G5 G4 J4 J5 H4 H5 A8 B8 C8 A7 B6 A6 C7 B7 G1 G2 G3 F1 H3 H2 H1 J3 D9 E9 D8 E8 D7 E7 D6 E6 C3 E3 A2 B2 C2 F3 A5 J1 B9 F2 C6 J2 C9 B3 A3 D5 C1 B1 F6 A9 C10
DADRS0 DADRS1 DADRS2 DADRS3 DADRS4 DADRS5 DADRS6 DADRS7 DADRS8 DADRS9 DADRS10 DADRS11 DADRS12 DDATA0 DDATA1 DDATA2 DADRS4 DDATA3 DADRS6 DDATA4 DADRS10 DDATA5 DADRS3 DDATA6 DDATA7 DDATA8 DDATA9 DDATA1 0 DDATA1 1 DDATA1 2 DDATA1 3 DDATA1 4 DDATA1 5 DDATA1 6 DDATA1 7 DDATA1 8 DDATA1 9 DDATA2 0 DDATA2 1 DDATA2 2 DW E DDATA2 3 DCS0B DDATA2 4 DRAS DDATA2 5 DCAS DDATA2 6 DDATA2 7 DDATA2 8 DDATA2 9 DDATA3 0 DDATA3 1 DCS0B DCLKNO R1289 22 DCLK O R1288 22 R1277 0 R1279 390 R1278 0 TCAS TRAS C 1217 1 6.3V X6S C 1209 1000p 50V B C 1231 10 10V C C 1221 1 6.3V X6S C 1222 0.1 16V F C 1219 1 6.3V X6S TCS TADRS3 R1287 47 TW E TADRS2 DADRS12 DBA0 DBA1 R1284 47 R1285 47 R1286 47 TADRS12 TBA0 TBA1 TBA0 TBA1 TADRS10 TADRS0 TADRS1 DADRS11 DADRS2 DADRS7 DADRS8 R1283 47 DDQS0 TADRS11 TADRS2 TADRS7 TADRS8 DDM 0 TW E TCAS TRAS TCS C 1208 1 6.3V X6S R1244 33 R1240 22 C 1207 1000p 50V B R1243 0 R1247 22 C 1206 0.01 16V B TADRS3 TADRS10 TADRS6 DDATA7 R1282 47 TADRS4 DDATA6 DDATA4 DDATA5 DADRS5 DADRS9 DADRS0 DADRS1 R1281 47 TADRS5 TADRS9 TADRS0 TADRS1 DQ3 DQ4 VDDQ2 DQ5 DQ6 VSSQ2 DQ7 NC1 VDDQ3 LDQS NC2 VDD2 NC LDM /WE /CAS /RAS /CS NC3 BA0 BA1 A10/AP A0 A1 A2 A3 VDD3 DQ12 DQ11 VSSQ4 DQ10 DQ9 VDDQ4 DQ8 NC6 VSSQ3 UDQS NC5 VREF VSS2 UDM /CK CK CKE NC4 A12 A11 A9 A8 A7 A6 A5 A4 VSS1 DDATA0 DDATA1 DDATA2 DQ2 VSSQ1 DQ13 VDDQ5 R1241 0 R1245 22 C 1202 1 6.3V X6S C 1203 0.1 16V F C1235 10 10V C
IC201 K4S641632K-UC60T
54
VDD1 DQ0 VDDQ1 DQ1 DQ2 VSSQ1 DQ3 DQ4 VDDQ2 DQ5 DQ6 VSSQ2 DQ7 VDD2 LDQM WE CAS RAS CS BA0 BA1 A10/AP A0 A1 A2 A3 VDD3 VSS3 DQ15 VSSQ4 DQ14 DQ13 VDDQ4 DQ12 DQ11 VSSQ3 DQ10 DQ9 VDDQ3 DQ8 VSS2 N.C/RFU UDQM CLK CKE N.C A11 A9 A8 A7 A6 A5 A4 VSS1
IC1201
DDR SDRAM
B+ B+
1
C1215 100 4V C 1204 1 6.3V X6S R1255 22 R1248 0 DDATA2 3 DDATA2 2 DDATA2 1 C 1205 0.01 16V B R1256 22 R1249 0 DDATA1 9 DDATA1 8 DDATA1 7 C 1210 1000p 50V B DDATA1 6 DDATA2 0
1 2 3
53 52
IC1201 K4H511638C-UCB3T
66
VDD1 DQ0 VDDQ1 DQ1 VSS3 DQ15 VSSQ5 DQ14
MD 1
51
MD 2
65
50
5 6
64
49
MD 3 MD 4 C281 1 6.3V X6S R320 33 C288 0.1 16V F C282 1 6.3V X6S
63
48
7 8 9
62
47 46
DDATA3
61
MD 5 MD 6
10 11 12
60
45 44 43
R1242 0
59
8 9
58
MD 7
13 14
10
57
42 41
11
56
LDQM WE Z CAS Z
15 16 17
12
55
40 39 38
13 14
54 53
RAS Z
18 19
37 36
15
52
R210 33
R1250 0
DDQS2
16
51
MB A
20 21
35 34
17 18
50 49
22 23 24 25 26 27
C289 1000p 50V B
33 32 31 30 29 28
19
48
R202 33
AC1 AC3
R1251 33
20 21
47 46
R203 33
22 23 24 25
45 44
C 1218 1 6.3V X6S R1252 33
43 42
B+
26
41
27 28
40 39
HADRS13
AF4 AE2
29
38
MCLK
30 31 32 33
37 36 35 34
IC1102
FLASH ROM
HADRS3 R1034 10k C 1101 1000p 50V B R1035 10k HADRS4 HADRS5 HADRS6 HADRS17 HADRS7 HADRS8 HADRS9 HDATA1 5 HDATA7 HDATA1 4 HDATA6 HDATA1 3 HDATA5 HDATA1 2 HDATA4 C 1113 1 6.3V X6S HADRS10 HADRS11 HADRS12 HADRS13 HADRS14 HADRS15 HADRS16 HADRS17 HADRS18 HDATA1 1 HDATA3 HDATA1 0 HDATA2 HDATA9 HDATA1 HDATA8 HDATA0 R1132 47 HDOE R1028 10k R1027 10k HADRS19 HADRS20 HADRS21 HADRS22
TCLKO TCLKNO
B+
HADRS5 HADRS5 HADRS6 HADRS16 HADRS6
IC1102 S29GL064A90TFIR90H
48
A15 A14 A13 A12 A11 A10 A9 A8 A19 A20 WE RESET A21 WP/ACC RY/BY A18 A17 A7 A6 A5 A4 A3 A2 A1
IC1221
DDR SDRAM
A16 BYTE VSS2 DQ15/A-1 DQ7 DQ14 DQ6 DQ13 DQ5 DQ12 DQ4 VCC DQ11 DQ3 DQ10 DQ2 DQ9 DQ1 DQ8 DQ0 OE VSS1 CE A0
7
TO (2/7)
HADRS15
IC1221 K4H511638C-UCB3T
66 1
VDD1 DQ0 VDDQ1 DQ1 DQ2 VSSQ1 DQ3 DQ4 VDDQ2 DQ5 DQ6 VSSQ2 DQ7 NC1 VDDQ3 LDQS NC2 VDD2 NC LDM /WE C / AS R / AS /CS NC3 BA0 BA1 A10/AP A0 A1 A2 A3 VDD3 VSS3 DQ15 VSSQ5 DQ14 DQ13 VDDQ5 DQ12 DQ11 VSSQ4 DQ10 DQ9 VDDQ4 DQ8 NC6 VSSQ3 UDQS NC5 VREF VSS2 UDM /CK CK CKE NC4 A12 A11 A9 A8 A7 A6 A5 A4 VSS1
47
HADRS14
46
HADRS13
R1261 0
R1265 22
R1273 22
65
45
HADRS12
64
44
HADRS11
63
43
HADRS10
62
42
HADRS9
DDATA1 1
R1107 0
DDATA2 8
61
41
8 9 10 11 12
60
40 39 38 37
DDM 3 DDQS 0 DDQS 1 DDQS 2 DDQS 3 DBA0 DBA1 DCKE DCLKO DCLKNO C 1057 0.1 16V F SO SCLK DDATA1 2 DDATA1 3 DDATA1 4 DDATA1 5
R1262 0
R1266 22
59
58
9 10
57
XRESET HADRS22 R1191 4.7k HADRS19 HADRS18 HADRS8 HADRS7 HADRS6 HADRS5 R1164 4.7k R1163 4.7k
TO (2/7,3/7,5/7,7/7)
R1110 0
56
36
13 14
11
55
35
12
R1103 0
B+
IC200
EEP ROM DDQS1 R1263 0 R1267 22 C 1226 1000p 50V B
54
34
15 16 17 18 19 20 21
13
53
33 32 31 30 29 28
14
(NOT USE)
HADRS23 HSTTOM HSMTOT HDATA0 HDATA1 HDATA2 HDATA3 HDATA4 HDATA5 HDATA6
52
15 16 17
R1270 0
DDQS3
51 50
SCLK SI CSO Z
IC200 SST25VF016B-50-4C-S2AF-T
CE SO WP VSS VDD HOLD SCK SI
C201 0.1 10V B C202 1 6.3V X6S DDM 1 TW E TCAS R1264 33 R1260 22
49
18 19
48
10
TO (2/7,2/7)
SPDIFSEL
R1021 10k
HCS0 HADRS1
SI
R1271 33
47
27
22 23 24
20
R201 10k
46
26 25
21
3 4
6 5
45
22
TRAS
44
23
B+
V+3D
B+
TCS
R1272 33
3
TO (1/7) GND D V +2R5
R1033 10k
R1032 10k
HDATA7 HDATA8
R1219 0
43
24 25
42
TBA0 LLRST R219 4.7k MD 0 MD 1 MD 2 SCL_G P R1111 100k MD 5 R220 4.7k TBA1 CN201 T P201 1 T P202 2 T P203 3 T P204 4 T P205 5 SDA_GP HADRS13 T P206 6 T P210 7 REM O R1040 100 0.5% R1039 43 0.5% REMI R221 47k R222 47k T P207 8 T P208 9 T P209 R223 22 10 V+3D RX_FE TX_FE XRESET C 1228 1000p 50V B TP614 C 1212 0.1 16V F GN D D0(MA) D1(SL) TADRS3 C 1220 1 6.3V X6S D5(AG) TADRS2 A9(ATA) TADRS1 PW TADRS0 10P TADRS10
41
26
B+
40
27
(NOT USE)
R1182 10k R1016 10k
39
28 29 30 31
38 37 36
HSTTOM
35
32
14
TO (3/7)
(FOR CHECK)
34
33
R1205 10k
H
HCS0 R1017 0
B+
A T/XDT
15
TO (6/7)
B+
VREF_D
16
TO (7/7)
MEMORY BLOCK
RD-065 (4/7)
4-35
4-36
RDR-HXD870/HXD970/HXD1070
For Schematic Diagram Refer to page 4-55 for printed wiring board.
10
RD-065 BOARD(5/7)
SATA/IDE IF
A
-REF.NO.: 20,000 SERIESCN3801 40P TP3801 R3808 100 AT0RESET
IC1001 (3/5)
AV ENC/DEC
IC1001 MC10050F1-105-LU1-A
HRESET 40 GND 39 TP3802 HDB7 38 TP3803 HDB8 37 TP3804 HDB6 36 TP3805 HDB9 35 TP3806 HDB5 34 TP3807 HDB10 33 TP3808 HDB4 32 TP3809 HDB11 31 TP3810 HDB3 30 TP3811 HDB12 29 TP3812 HDB2 28 TP3813 HDB13 27 TP3814 HDB1 26 TP3815 HDB14 25 TP3816 HDB0 24 TP3817 HDB15 23
AT0DATA7 R3810 33 AT0DATA8 AT0DATA6 AT0DATA9 AT0DATA5 R3811 33 AT0DATA10 AT0DATA4 AT0DATA11 AT0DATA3 R3812 33 AT0DATA12 AT0DATA2 AT0DATA13 AT0DATA1 R3813 33 AT0DATA14 AT0DATA0 AT0DATA15 AT1DATA0 AT1DATA1 AT1DATA2 AT1DATA3 AT1DATA4 AT1DATA5 AT1DATA6 AT1DATA7 AT1DATA8 AT1DATA9 AT1DATA10 AT1DATA11 AT1DATA12 AT1DATA13 AT1DATA14 AT1DATA15 M4 R1 R4 R2 N5 R3 P4 T1 T2 P5 T3 R5 U1 N4 U2 W1 U3 W2 T5 U5 V1 M5 V2 V5 T4 V3 U4 V4 AT1D00 AT1D01 AT1D02 AT1D03 AT1D04 AT1D05 AT1D06 AT1D07 AT1D08 AT1D09 AT1D10 AT1D11 AT1D12 AT1D13 AT1D14 AT1D15 AT1DA0 AT1DA1 AT1DA2 AT1DIOWB AT1DIORB AT1INTRQ AT1DMACKB AT1DMARQ AT1CS0B AT1CS1B AT1IORDY AT1RESETB AT0D00/HDD0 AT0D01/HDD AT0D02/HDD2 AT0D03/HDD3 AT0D04/HDD4 AT0D05/HDD5 AT0D06/HDD6 AT0D07/HDD7 AT0D08/HDD8 AT0D09/HDD9 AT0D10/HDD10 AT0D11/HDD11 AT0D12/HDD12 AT0D13/HDD13 AT0D14/HDD14 AT0D15/HDD15 AT0DA0/HDA0 AT0DA1/HDA1 AT0DA2/HDA2 AT0DIOWB/DIOW AT0DIORB/DIORB AT0INTRQ/HINTRQ AT0DMACKB/HDMACKB AT0DMARQ/HDMARQ AT0CS0B/HCS0B AT0CS1B/HCS1B AT0IORDY/IORDY AT0RESETB/HRSTB HIOCS16B AT0ADR1 RXD2_BRIDGE TXD2_BRIDGE AT0ADR0 R3824 82 AT0ADR2 AT0CS0 AT0CS1 AH23 AJ24 RXD2B/GPIO42 TXD2B/GPIO43 PDIAGB DASPB W11 T13 V13 AD7 AC6 AD6 TP1005 TP1003 TP1004 AT0CS1 AT0IORDY AT0RESET V14 U11 U12 W15 V11 T12 P13 R15 R13 V10 P15 U13 R14 U15 W13 T14 W14 U10 U14 P14 R12 V12 V15 T15 W12 AT0DATA0 AT0DATA1 AT0DATA2 AT0DATA3 AT0DATA4 AT0DATA5 AT0DATA6 AT0DATA7 AT0DATA8 AT0DATA9 AT0DATA10 AT0DATA11 AT0DATA12 AT0DATA13 AT0DATA14 AT0DATA15 AT0ADR0 AT0ADR1 AT0ADR2 AT0DIOW AT0DIOR AT0INTRQ AT0DMACK AT0DMARQ AT0CS0
GND 22 AT1ADR0
DVD UNIT
GND 21 TP3818 DMARQ 20 GND 19 TP3819 XDIOW 18 GND 17 TP3820 XDIOR 16 GND 15 TP3821 IORDY 14 TP3822 HCSEL 13 TP3823 XDMACK 12 GND 11 TP3824 INTRQ XIOCS16 HA1 10 TP3825 9 TP3826 8 TP3827 XPDIAG HA0 HA2 XCS1FX XCS3FX XDASP GND 7 TP3828 6 TP3829 5 TP3830 4 TP3831 3 TP3832 2 TP3834 1 TP3835 R3871 22k R3862 0
R3814 22
AT0DMARQ
AT1ADR1 AT1ADR2
R3816 82
AT0DIOW
AT1DIOW A T1DIOR
R3817 82
AT0DIOR
A T1INTRQ AT1DMACK
R3818 22
AT0IORDY
AT1DMARQ AT1CS0
R3820 82
AT0DMACK
AT1CS1 AT1IORDY
R3821 22
AT0INTRQ
AT1RESET
SIGNAL PATH
VIDEO SIGNAL CHROMA REC PB Y Y/CHROMA AUDI O SIGNAL
R3823 82
RXD2_BRIDGE
TXD2_BRIDGE
AT1CS0
AT1CS1
PDIAG
R5692 0 R5693 0
TP3836 1 2 TP3837
AT1RESET
Reset# GND
CN3802
40P
R3835 33
R5606 82 R5607 82
R3828 22K
DAS P
DD7 DD8 DD6 DD9 DD5 DD10 DD4 DD11 DD3 DD12 DD2 DD13 DD1
3 TP3838 4 TP3839 5 TP3840 6 TP3841 7 TP3842 8 TP3843 9 TP3844 10 TP3845 11 TP3846 12 TP3847 13 TP3848 14 TP3849 15 TP3850 16 TP3851 17 TP3852
B+ B+
R5610 1k R5609 10k R5608 10k
R5617 1k
R5619 1k
R5615 1k R5618 10k R5672 0 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 C5615 0.1 10V B
PHYRDY
DGND2
VCCO2
VCCK2
CLKSEL1
CLKSEL0
PDIAGn
R3839 33
FXDMA
MSSEL
PMEN
UAO
SSCEN
DASPn
CS0n
CS1n
UAI
AT1DATA3 AT1DATA12 AT1DATA2 AT1DATA13 AT1DATA1 R3840 33 AT1DATA14 AT1DATA0 AT1DATA15 A T1INTRQ AT1DMACK AT1IORDY R5626 22 R5627 82 R5628 22 R5664 0 52 SP 53 INTRQ 54 DMACKn 55 IORDY 56 VCCK3 AT1DMARQ A T1DIOR AT1DIOW AT1DIOW AT1DMARQ R5629 82 R5630 82 R5631 22 57 DGND3 58 DIORn 59 DIOWn 60 DMARQ 61 DD15 AT1ADR2 AT1ADR0 AT1ADR1 R5622 82 R5623 82 R5624 82 49 DA2 50 DA0 51 DA1
C5614 0.01 16V B TXP TXN AGND2 AVDDL 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 C5611 0.01 16V B C5612 0.1 10V B R5659 1k R5651 12k C5624 0.01 16V B R5652 100
CN5604 C5623 0.01 16V B 1 2 3 4 C5625 0.01 16V B 5 6 7 C5616 0.1 10V B R5688 1M R5661 1k X5502 25MH z R5689 1k GND TXP TXN GND RXN RXP GND
7P
IC5602
SATA BRIDGE
HDD UNIT
18 19 TP3853 20 TP3854 21 22 TP3855 23 24 TP3856 25 26 TP3857 27 TP3858 AT1DATA1 R3847 22 28 TP3859 29 30 TP3860 31 TP3861 32 TP3862 33 TP3863 PDIAG AT1ADR0 R3851 33 AT1ADR2 AT1CS0 AT1CS1 DASP I 34 TP3864 35 TP3865 36 TP3866 37 TP3867 38 39 TP3869 40 R3846 1k R3832 22k C3802 1 6.3V X6S C 3803 1 6.3V X6S R3833 22k C 3804 1 6.3V X6S TP3868 R3850 33 R3849 10k AT1ADR1 L 5601 EMI G O R3848 82 AT1INTRQ AT1DMACK R3857 0 AT1DATA0 R3845 82 AT1IORDY AT1DATA14 R3844 22 AT1DIOR AT1DATA15 R3843 22 R3841 82 R3829 22k R3830 22k R3831 22k R3842 5.6k
B+
IC5602 88SA8040-TBC1C000
R5657 1k
GND INTRQ RESERVED DA1 PDIAG# DA0 DA2 CS0# CS1# DASP# GND
(V+3DS) TP999
10
11
12
13
14
15
16
RESETn
DGND1
CSEL DMACK#
VCCO1
VCCK1
DD13
DD12
DD11
DD10
R5632 33
DD2
DD3
DD4
DD5
DD9
DD6
DD8
DD7
R5658 1k
C5640 15p
C5641 15p
R5690 0 XRESET
B+
8
TO (2/7,3/7,4/7,7/7)
B+
C 5613 100 4V C5603 0.1 16V F C5602 1 6.3V X6S C5608 0.01 16V B C5607 0.01 16V B C5609 0.01 16V B C5610 0.01 16V B
R5638 33
R5642 33
R5646 33
H
V+3D
4
TO (1/7) GNDD TP3870 V +1R8
B+
B+
AT1DATA13 AT1DATA12 AT1DATA11 AT1DATA10
B+ B+
AT1RESET
AT1DATA2
AT1DATA3
AT1DATA4
AT1DATA5
AT1DATA9
AT1DATA6
AT1DATA8
AT1DATA7
R5650 82
4-37
4-38
SATA/IDE IF
RD-065 (5/7)
RDR-HXD870/HXD970/HXD1070
For Schematic Diagram Refer to page 4-55 for printed wiring board.
10
11
12
13
14
RD-065 BOARD(6/7)
HDMI/DV/USB BLOCK
A
-REF.NO.: 20,000 SERIESR5825 22
IC1001 (4/5)
AV ENC/DEC
IC1001 MC10050F1-105-LU1-A
IC5801
IC5801
R5846 4.7k C5801 1 6.3V X6S C5802 1000p 50V B R5842 330
Note1: The HDMI block is highly confidential, and prohibited from releasing to public. Note2: The components identified by mark 9 contain confidential information. Strictly follow the instructions whenever the components are repaired and/or replaced.
LINKON
E16
PHYLINKON PHYLPS PHYLREQ PHYSCLK PHYCTL0 PHYCTL1 PHY_D0 CLK PHY_D1 PHY_D2 PHY_D3 PHY_D4 PHY_D5 PHY_D6 PHY_D7 D7 D6 D5 D4 R5827 22 D11 D10 D9 D8 R5829 56 R5826 22 C 5821 1000p 50V B
LPS D16 LREQ/AILRCK1 SCLK/VICLK CTL0/AIBCK1 CTL1/AIBD1 PHY_D0/VID0 PHY_D1/VID1 PHY_D2/VID2 PHY_D3/VID3 PHY_D4/VID4 PHY_D5/VID5 PHY_D6/VID6 E15 D15 E14 D14 E13 D13 E12 D12 E11 D11 E10 D10 F20
R5857 10k
JA5801
19P
IC5203
AND GATE C5211 1000p 50V B C5213 1 6.3V X6S R1006 15K R1005 15K CN5201 TP5202 10 USBDM2 GND USBDP2 GND V+5USB USBVF B GND USBDM1 GND USBDP1 TO FL-178 BOARD CN102 THROUGH THE RU-001 HARNESS USB_D_DN0 R5216 0 C5216 1000p 50V B USB_D_DP 0 USB_H_OCI0 USB_H_PPON0 R5217 0 R5213 0 R5212 0 4 TP5206 3 TP5208 10P
Not open to public Not open to public Not open to public Not open to public Not open to public Not open to public Not open to public Not open to public Not open to public USB_D_VBUS
L 5801 90uH
R5843 330
2 3 4
2 3
1 4
B+
USB_DN 0
L5201 0uH
R5844 330
5 6
R5201 0
IC5203 TC7SH08FU(T5RSOYJF)
5 1 1 2
VCC INB INA R5202 0 R5222 10
9 TP5203 8 TP5204 7
2 L5802 90uH
1
8 9
D3 D2 D1 D0 R5828 22
R5845 330
USB_DP0
B+
TP5201 6 TP5205 5
PHY_D7/VID7 IR_IN/GPIO52
10 11 12 TP5802 13 14 TP5803 15 TP5804 C560 1 1 6.3V X6S 16 17 18 TP5805 19 R5824 0.1 B R5803 0 R5832 0.1 B
Not open to public Not open to public Not open to public Not open to public Not open to public Not open to public USB_D_CONEECT Not open to public Not open to public Not open to public Not open to public GNDHS R5205 68
OUTY
GND
R5221 47k
L520 2 0uH
M2 M1 N1 M3 N2 P2 P1 N3 P3
VDD OUT
X5201 C5223 1000p 50V B C5222 0.1 16V F C5205 1 6.3V X6S
STANDBY GN D
DE R5838 33 R5839 470 R5861 10k R5833 22 R5834 22 R5831 0 R5837 0 L 5805 I EM I O G C5822 1000 p 50V B R5854 10k C 5806 1 6.3V X6S 2 1 4 5 R5863 680 R5862 4.7k
2 TP5207 1
VSYNC CTL3
L 5803 90uH
HSYNC
Q5809 UMD2N-TR
SWITCH
B+
L 5804 90uH
R5207 0
R5220 1.5k
IC5204
5V REG TP5209 C5219 1000p 50V B
3 2 3
1 4
R5214 47k
3 C580 9 220 4V
B+
C 5813 0.1 16V F C 5812 0.1 16V F C 5814 0.1 16V F C 5117 12p 50V X 5101 24.576MHz C5118 12p 50V
B+
B+
TP5801
B+
B+
IC5204 R1173H001B
ON/OFF
B+
Q5802 RN2903(T5RSONY,D,F)
SWITCH
VSS
IC5202 R5523N001B-TR-F
EN GND FLG VIN VOUT
VI N
VOUT
NC
1 2
1 2
15
TO (4/7)
SDA_GP SCL_GP
1 R5204 820
SCL_VDEC
SWITCH R5813 2.7k R5812 4.7k C5116 1 6.3V X6S R5101 100k R5102 100k
C5121 100 4V
L5101 0uH
Q5804 DTC124EUA-T106
R5814 4.7k
B+
R5215 47k
IC5202
USB 5V SW
11
R5110 10k
R5111 1k
TO (2/7)
B+
R5113 10k R5114 10k R5115 10k R5116 10k
R5117 100k
D6 17
D7 18
SUS/RES 19
DVDD 20
DGND 21
X0 22
X1 23
AGND 24
AVDD 25
PC0 26
PC1 27
PC2 28
IC(AL) 29
CMC 30
AVDD 31
R5105 68
PHY_D7 PHY_D6 PHY_D5 PHY_D4 DGND D5 D4 DGND D3 D2 DVDD D1 D0 DGND CTL1 CTL0 DVDD IC(DL) SCLK DGND
CPS 32
16
33
34
14
B+
R5817 4.7k R5818 4.7k PHY_D3 PHY_D2 PHY_D1 TU_DSDA PHY_D0 R5106 68
35
R5120 56 0.5%
R5119 56 0.5% R5135 0 R5134 0 R5132 0 R5133 0 TP5103 6 TP5104 5 4 3 TP5102 2 TP5101 1
15
36
13
1 2
6P
37
DDC_SW1
12
15 14
IC5103
DV PHY
38
TU_HPD TU_HPD
39
10
R5867 560
R5870 27k
40
41
TO (3/7)
13
TU_CEC TU_CEC
IC5802
DDC SW
11
3 4 5 6
13 12 11
IC5103 UPD72852AGB-8EU-A
R5121 56 0.5%
R5122 56 0.5%
10
R5822 4. 7 k
V+3HD
45
B+
DDC_SW 1
TU_CEC
48
47
44
R5107 68 R5108 68
42
43
46
APD/BDB
RESETB
IC(AL)
DIRECT
FNSEL
DGND
DVDD
AGND
DVDD
AGND
AGND
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
V+5HD
B+ B+
R5864 1k
Q5805 ISA1602AM1TP-1EF
HOT PLUG DET
B+
C5122 100 4V C 5123 1 6.3V X6S C 5107 1 6.3V X6S
V+3D
R5125 1k
B+
3 4 5 2
Q5801 UMX1N-TN
R5809 2.7k HOT PLUG DET
EM I O G
R5123 10k R5124 10k C 5108 1 6.3V X6S C 5110 1 6.3V X6S R5140 10k C5109 0.1 16V F
49
AGND
AVDD
LKON
LREQ
LPS
7 8
B+
5
TO (1/7)
R5129 82
TP996
R5807 5.6k
R5806 1k
R5804 47k
EV+5.8 V
B+
HDMI/DV/USB BLOCK
RD-065 (6/7)
4-39
PHYLINKON
PHYLREQ
PHYLPS
R5130 0 R5141 0
Q5810 UMF21NTR
R5127 10k
4-40
RDR-HXD870/HXD970/HXD1070
For Schematic Diagram Refer to page 4-55 for printed wiring board.
8
CN101 F+ FTP171 50 TP173 49 FD TR TD SCLK SDIO SEN VPP RESET VD3V TEM P RSET W1SET W2SET W3SET LDDEN OSCEN OSCEN+ W1ENW1EN+ W3ENW3EN+ W2ENW2EN+ VO5V VO5V OSCNT GNDO GNDO HFGAIN DVD/CD GNDA FMOFMO+ VA5V SW2 M3 M2 M1 M4 VREFPD RF+ GNDA RFVA5V S3 S2 S1 S4 SW1 TP175 48 TSCLK SI LCDS R313 47k TP177 47 TP187 46 TP183 45 TP184 44 TP182 R115 0 43 TP181 42 FR
9
50P
RD-065 BOARD(7/7)
DVD DRIVE
-REF.NO.: 20,000 SERIES-
T+
TO (2/7,3/7,4/7,5/7)
XRESET
L105 10uH
B+
C194 4.7 6.3V B C171 0.1 10V B APCV W1SET W2SET R168 0 R167 820 R166 820 R165 820 C197 0.1
V+3A
B+ B+ B+ B+
R174 4.7k 0.5%
V+3D
V+5M
V+12M
DVD UNIT
26 TP136 25 OSCNT C189 1000p 50V HFGAIN DVD/CD TP144 FMOFMO+ V+5L TP145 TP102 24 TP6110 23 22 TP103 21 TP143 20 TP146 19 TP151 18 TP154 17
TO (1/7)
B+
C182 10 10V C C187 0.01 16V B C180 10 10V C SW2 A D C173 47p C172 47p C170 47p C174 47p R306 2.2k
B+
GNDD
C GNDM B
RF+
RF-
TP170 7
B+
S3 TP161 C176 22p C166 22p C165 22p C177 22p R307 2.2k R137 220 R131 220 R130 220 R139 220 S2 S1 S4 SW1 TP195
IC1001 (5/5)
B+
AV ENC/DEC
IC501
DVD DRIVER
AJ5 AH5 AH3 AH4 AJ3 AJ4 AH1 AH2 AJ11 AJ8 AJ9 AJ10 C140 6.3V 0.47 B C141 6.3V 0.47 B AH12 AJ12 AH10 AH8 AH9 AH11 AF8 AE9 AE11 AF11 AG9
HFONM HFONP WRPULSEM WRPULSEP PKPULSE2/NRZIM PKPULSE2/NRZIP PKPULSE1M PKPULSE1P A1 D1 C1 B1 RFP RFN F1 H1/FOM G1/FOP E1 RLD WLD PLED P2LD
CN502 4P TP503 ST2+ ST2ST1ST1+ 4 TP504 3 TP505 2 TP506 1 FDRV ST1+ ST1TDRV TP523 TP521 ST2ST2+
IC501 BD7956FS-E2
T+ TF+ F-
W1EN W1EN + W3EN W3EN + W2EN W2EN + C505 0.1 25V B C516 0.1 10V B R505 12k C504 0.1 10V B C532 0.1 10V B ST1+ ST1ST2+ ST2A D C LO B RF+ RF FG S3 S2 S1 S4 APCV W1SET W3SET W2SET R504 1k R503 1k R511 1.8 XDMUTE2 XDMUTE1 FMO+ FMO-
R1066 47k R1069 47k R1067 47k BECS BECS (NOT USE)
54
LDOLDO+ VCC ACTIN1 ACTIN2 TJMON BTHC SPVM_SA PGND1 PGND2 U SPVM1 V FIN1 PGND3 W SPVM2 SPRNF HB HU+ HUHV+ HVHW+ HWSPIN DGND
ACO1+ ACO1ACO2+ ACO2ACO3+ ACO3AVM CTIN3 LDIN AGND SPCNF FG VC FIN2 SLO1+ SLO1SLO2+ SLO2SLGND CTL2 CTL1 SLRNF2 SLRNF1 SLVDD SLIN2 SLIN1 DVCC
1 2
AG2 AJ6 AH7 AG6 AG3 AG7 AJ7 AH6 AG4 AE7 AG1 AE6 AF6 AG5 AF7 R234 0 R233 0 R230 0 R129 0 R128 0
BECS R192 100 R312 LCD S 1k R314 1k DVD/CD R134 47k R138 47k TP120 TP121 TP139 OPEN
REMI
53
B+
TP522 TP520 R515 33k R516 12k C515 T P519 0.1 25V T P501 B
D101 SML-310YTT86
52
16
TO (4/7)
3 4 5
51 50
F
C503 470p 50V CN601 5P LPS2 GNDD LPS1 BLACK RED 5 TP611 4 TP610 3 TP607 2 TP605 1 W R502 0.33 1/2W V R604 1k CLOS E U R501 0.47 1/2W R601 10k TP612 R602 10k R603 1k OPEN C501 0.1 16V F
49
6 7 8 9 10 11 12 13 14 15
48 47 46 45 44 43 42 41 40
GNDS CLOSE IC1001-AJ2 SW1 SW2 HFGAIN LDDEN OSCNT REMI REM O TP6001 R6001 0 TP6002
9
TO (2/7)
IC1001 MC10050F1-105-LU1-A
DVD UNIT
39
16 17
38
G
VCC HU+ HUHV+ HVHW + HW HB U V W
CN501 12P TP518 12 TP517 11 TP516 10 TP515 9 TP514 8 TP513 7 TP512 6 TP511 5 TP510 4 TP509 3 TP508 2 TP507 1 GNDD W V U
B+
C511 1 16V B
WRFM/SWRF3/RFP3 AJ23 RFT1/SWRF1/RFP1 RFT2/SWRF2/RFP2 AG21 AH22 XDMUTE1 XDMUTE2 R311 1k R301 47k FG LO SL2 SL1 TDRV FDRV MDRV R108 6.8k C124 0.1 10V B R245 10k R244 22 R243 10k R242 22 R241 10k R240 22 R238 22 R237 10k
37
18 19 20 21 22 23 24 25 26 27
14P
36 35 34 33 32 31 30 29
C512 0.1 16V F
FPDVI AG8 PDIN AJ2 OFPULSE/WRCKM C149 0.01 16V B R111 470k TP127 AJ1 OFPULSE/WRCKP AF10 VREFIO AF9 REF16 AE8 RLDM AE10 WLDM R112 470k AG10 FPDVO
B+
R239 10k
SL2 SL1
(FOR CHECK )
GNDD DCK GNDD NC NC NC V+3D
28
B+
B+
B+
14
4-41
4-42
DVD DRIVE
RD-065 (7/7)
RDR-HXD870/HXD970/HXD1070
3
C134 220p 250V D401 SF5LC20U T101 SWITCHING TRANSFORMER C407 1000p 1kV
L105
CN202 P401 1.6A/32V Q401 MPA2733GR 12V REG C402 470u 35V C405 0.1u R401 100k R406 100k Q402 DTC114EKA SWITCH C404 47u 35V R405 12k P201 2A/32V 1 2 3 4 5 6 7 P-CONT SW +3.3V GND SW +3.3V GND EV +5.8V EV +5.8V GND EV +12V GND SW +1.5V SW +1.5V CN203 1 D201 FCH20A06 L201 10uH Q201 STP22NF03L 5V REG 5.8V ADJ VR201 5k R204 18k R208 470 R206 620 C205 4700p R209 10k P204 2A/32V 1 Q501 STP22NF03L 3.3V REG R503 4.7 R210 10k R501 1.2k C503 0.01u IC501 TL431REF D604 ISS133 P501 2.5A/32V R505 150 R504 47 2 3 4 C504 47u 35V 5 R509 270 P402 0.63A/32V 6 7 8 9 C220 0.1u 10 11 12 C507 470u 35V C501 470u 35V L601 10uH 13 D603 ISS133 Q601 STP22NF03L 1.5V REG R603 3.3k R601 1.8k VR601 5k 1.5V ADJ C603 470P R604 1.5k C604 47u 35V 2 3 4 C206 47u 35V SW +12V GND GND SW +5V CN201 EV +5.8V GND SW +1.5V SW +1.5V GND SW +3.3V SW +3.3V GND SW +12V GND SW +5V GND SW +12V
12P
R115 100k 2W
B+
8 9 10 11
R111 15K
B+
L205 0uH
12
4P
B
AR101 DSP-501N
HDD UNIT
IC101 FA5518N
1 2 3 8 7 6 5
R110 220
D106 ISS133
C207 1500p
C208 1500p
13P
C106 6800P R116 220 1/2W L101 L.P.F C132 100p 250V
TH101
R203 1k
C203 0.1u
IC202 TL431CLP
IC101
OSC
D501 SB360
Z101 S10K300
FU101 T3.15A/250V
D601 SB360
B-
IC201,IC202
SHUNT REGULATOR
CN101 AC-INLET
IC601
SHUNT REGULATOR
Note :
The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.
SWITCHING REGULATOR
SRV-2057EK
4-43
4-44
RDR-HXD870/HXD970/HXD1070
4-3. PRINTED WIRING BOARDS
A
C235 C236 C237
C223
C216
C230 C232
A201 T201
ND201 Q202
Q201
(OPEN/CLOSE)
C225 C226 C227 C228 C229
S201 C239 C238 S210 J201 S211 R251 R250
C234 C233
INPUT SELECT
S207 S204
L201
D212
R219 Q205
C207
CH +
S212 S208
CN201
(PLAY)
(STOP)
(REC)
R249 CN202
(REC STOP)
CN203
HDD
C213 C211
DVD
S VIDEO
16
VIDEO O
AUDIO O
1-873-466-
11
1
FR-274 BOARD (SIDE B)
C202 R205
R253 R214
C208
A
JL205
R216
JL227 D205 C209 FB202 R204 R211 FB201 C206 C204 D206 R218 R255 D207 R220 R254 R256 JL233
JL230
JL226 JL228
JL218 JL216
JL212
R246
R201
R242 R240
R247
R222
C222 JL257
R230
D201
R245 R232
R212 R213
R231
JL209
R239
R224
C231 R248
R243
R226
R234 R235
D213
C220
JL203 JL213
JL204
R228
IC201
JL249 JL248 JL270 JL259 JL253 JL251 JL247 JL267 JL265 JL263 JL286 JL285 JL283 JL281 JL279 JL277 JL275 JL273 JL271 JL269 JL268 JL266 JL264 JL262 JL261 JL260 JL258 JL252 JL250 JL284 JL282 JL280 JL278 JL276 JL274 JL272
C219
JL246 JL245 JL243 JL241 JL239 JL237 JL235 JL238 JL236 JL234 JL244 JL242 JL240 C218
C221
R227
D215
R241
JL224 JL223
1-873-466-
11
16
5
CN201 CN202 CN203 D208 D209 D210 D211 B-1 B-4 B-6 A-7 A-7 A-7 A-7
6
FR-274 BOARD (SIDE A)
D212 D214 Q201 Q202 Q205 Q206 B-6 B-7 A-5 A-5 B-6 B-7 D202 D203 D204 D205 D206 D207
7
FR-274 BOARD (SIDE B)
A-1 A-2 A-1 A-2 A-2 A-2 D216 IC201 Q203 Q204 B-7 B-4 A-7 A-6
4-45
4-46
RDR-HXD870/HXD970/HXD1070
F
1-872-46811
16
1
AV-114
5
4-48
RDR-HXD870/HXD970/HXD1070
D
1-872-46811
16
2
4-49
7
AV-114
16
RDR-HXD870/HXD970/HXD1070
DT-120
3 4
R1058 R1049 R1059 C1076 C1112 CN103 L1006 C1018 R1001 C1010 C1026 C1014 R1034 R1030 Q1006 TP1007 Q1002 C1072 C1064 C1074 C1070 C1105 C1110 C1109 C1066 C1068 R1040 C1108 C1033 F1003 C1058 C1084 C1111 C1085 R1014 R1015 R1016 R1013 R1017 R1019 R1020 R1018 R1009 C1001 C1004 R1012 C1003 R1011 C1002 R1010 R1005 R1006 R1007 R1008
CN202
F1004
C634
TP639 C635R715 R718 C1082 TP1006 IC302 C633 C1107 TP1010 TP705Q1009 C306 TP706
5
R1022 L1002 C1022 C1020 R1032 R1028 Q1008 C1012 C1006 R1026 R1004 Q1004 L1004 C1011 C1024 C1019 L1008 C1016 C1015 C1008 R1024 C1028 R1036 R1003 Q1003 R1023 L1003 C1007 Q1001 R1002 L1007 R1027 C1017 C1023 Q1005 C1025 R1029 C1013 C1009 L1005 L1001 C1005 R1025 C1021 C624 TP704 F202 R1033 R1021
TP1008
C1106
C1030
TP623
TP1005 C1027 Q1007 R1035 R1031 C1032 TP1004 C1031 C1029 C623 C1034 D314 IC319 C636 R719
C1062 C1061
IC1001
C324 X1001
C433 R710
F1006 C631 IC320 TP1013 C1065 C211 TP825 R239 C627 C626 C212 C213 R251 TP858 TP634 C632 C1069C1071 C1073 C1067 C1075 C1077 C1078 R709 R720 TP703 R1062 TP1009 C1091 C602 F314 C628 R303 TP627 D315
C1080 C1094 C1095 C1114 C1092 C1087 C1089 C1090 C1093 C1088 C1103 C1115 C1116 C1104 C1079
6
TP826 TP859 TP842 TP839
C1122
F1005 C603 TP602 R185 R248 R594 R186 R595 R187 R188 R189 R190 R191 R192 IC205 F108 R247 C156 C111 R562 C146 R249 L193 R116 R561 R243 R110 C110 C107 TP676 R242 R250 TP853 TP854 R111 TP666 C116 C131 R101 C117 TP855 TP857 TP856 TP843 IC104 TP850 TP849 TP851 TP852 C108 C109 C112 C114 C155 C113 C193 R641 L194 F103 R598 R597 C115 R193
7 8
R345 F310 TP847
C120 R194
TP833 TP832 TP831 TP838 TP837 TP836 TP835 TP830 TP691 TP829 TP828 TP827
TP102 R569 R570 C148 C149 X100 TP103 R733 TP896 C128 C124 IC106 TP880 TP892 R723 TP665 C130 R170 C127 TP101 TP141 TP844 TP845 TP846 R244 TP139 R172 C125 TP140 R725 C638 TP878 C637 TP876 IC321 TP882 TP883 TP881 TP879 TP877 R240 R241 R245
R724
TP137 TP136 TP118 R146 TP134TP135 TP121 TP133 R578 C194 C126 R100 R690 TP660 TP580 C147 F301 R568 F302 R648 TP116
R721 R722
R728
C134 C135C136 C138 TP695TP694 C142 R579 R166 TP581 R169 R168 F104 R567 TP697
R605
R729
9
C368
TP672
CN102
C389 R678 C415 C412 C386 F316 R679 TP653 TP652 R682 TP650 TP651 TP342 C409 C413 R673 F319 C406 IC313 C417 C418 TP604 TP607
4-52
10
F398 C361 F397 U301 C356
TP614
TP613
C378 F311
R316 R649
R674
TP606 R333 C416 C408 R343 X300 TP167 R177 R647 R643 R691 R689 TP166 TP612 TP611 R683 C399 C397 C402 C398 R671 TP610 C163 R532 R646 R533 R531 R534 R644 R645 TP618 TP608 TP609
IC104 IC106 IC205 IC300 IC302 IC313 IC319 B-8 C-8 E-7 B-5 B-5 B-10 E-6
CN102 CN103 CN201 CN202 CN203 A-9 F-5 C-2 A-4 A-10 Q1001 Q1002 Q1003 Q1004 Q1005 Q1006 Q1007 Q1008 E-6 E-5 E-5 E-5 E-6 E-5 E-5 E-5 IC320 IC321 IC1001 B-6 B-8 C-6
11
1-872-46711
12
RDR-HXD870/HXD970/HXD1070
A
TP554 TP555 TP565 TP563 TP561 TP559 TP547 TP544 TP870 TP869 TP871
TP584
C640 R726
TP577
TP532
TP576 TP574
TP573
TP575
TP326
C639
IC322
TP582
TP626
TP553
TP564
TP562
TP560
TP558
TP557
TP543
TP545
TP126
TP668
R182
R183
TP667
Q312
R173
R1064
C302
C594
C598
C593
C596
C599
C595
C601
R356
R731
R730
TP895
R1063
TP894
TP535
TP323
TP669
TP318
C597
C335
TP521
C314
C338
R684
TP536
B
TP165 TP157 TP164 TP161 TP160 TP162 TP168 TP159 TP158 TP163 R149 R106 R153 R151 R152 R154 R155 R693 R687
D102
R114
R361
C395
R681
D317
C340
TP628
TP664 IC110
TP622 F101
R107 C154
TP520
TP146
R672
IC307
R686
F321
C392
TP630
R685 R680 R354 TP629
TP658
TP659
F106 R109
C329
R305
IC306
D313
R642
C341
R355
R105 TP661
R1060
R669 R668
F313
C383
TP328
TP327 L315
TP537
TP670
R147
TP769 TP771
TP124
R162
C1123 C1124 TP761 TP762 TP760 TP758 TP754 TP756 TP752 TP750
TP897
TP787
F203
TP302 R300 TP303 F318 TP663 R160 C521 C319 TP657 TP104 R577 R138 C137 TP114 R589 R576
R163 TP122
C1113
R1055 R1054
TP765
TP770 TP768
R230 TP147
TP822
F204
R629 R628
IC311
C394
C379
C1119
R692
R324
R201
Q305 TP775
R312
C1118 C1101
C396 R325
IC1002
R271
TP748
R260
R274 R267
Q202
C104 C119
TP324
C191
C225
R317
C520
C301
F105
R124 R126
C1059
C105
TP322
R696
T300
R688
L304
R205 R204
C360 L302
TP568
TP799 R210
TP821
TP797
TP696
C343
R695
TP325
TP740
TP800
TP801
C1052 C1051 C1038 C1050 C1049 C1048 C1037 C1047 C1036 C1046 C1035 C1045 C1044
TP674
C1099
C307
TP570
C144
R323
L305
F1002
C377
C1042
C381
C382
R326 R313
C374 R314
Q306
TP673 R667
TP600
R559 TP688
TP729
C616
TP692 R565
R666
TP621
TP1016
TP1015
TP1018
TP675
Q204
C366
R224
IC202
F306
C353
R228
IC204
TP531
TP538
C221
C223 C222
C359
F305
C365
C358
C208
TP700 TP693
TP701 TP699
C388
R227
C401
IC312 C403 C390
C207
D302
TP514
TP848
D309
TP340
TP513
TP337
C621
TP861
TP334 C364
TP335 C363
TP336
IC203
R225
TP867
TP868
TP633
R270 R269
Q203
TP865 TP818
TP216
IC208
C206
TP643
C209 R231
R311
R226 TP862R223
C369
TP300
R363
TP599
C372
TP642
R566
R272
C619
R276
C210
C370
TP525
C414
R321 C317
IC207
C380
R319 R315
Q310
TP1017
C618
TP721
TP722 TP720
R275
R359
TP866
IC309
Q308
TP644
C322
R662
R563 TP689 R564 R560 TP690 R558 TP687 R556 R554 R552 TP686 R550 TP685 R548 TP684 R546 TP683 R544 TP682 TP681 R542 TP680 R540 TP679 R538 TP678 R536 TP677
TP723
TP724
R222 R263
R281
IC318
TP707
R221 R262
TP214
TP819
TP873
C326
TP632
TP875
TP874
C367
R254
TP502
IC304
TP506
C528
C339
C524 TP522
R306
TP315
R623
TP512
TP631
C522
C332
D310
TP523
C309
TP505
L301
TP872
TP503
TP504
TP524
TP572
TP815 R209
R580
TP601
C617
C614
R665 R651
R258
R353
TP709
TP710TP730
TP731
C205 TP820
R206 R207
R208 TP817
TP215
TP814
TP648
Q307
L191
C1040
TP712TP732
TP733
TP812
TP213
R219 R277
TP569
R352
C1041
TP1011
F1001
C1060 C1057
TP1002
TP734
TP735
TP813
TP809
TP810
TP647 TP646
TP662
C371
R346
C102
TP1003
TP718
TP737
TP794
TP808
L303
C312
R694
R259
TP807
TP795
TP719 TP715
TP811
TP796 TP798
R127
C1043 R1043
R203
D304
TP571
IC201
R104
R698 R707
TP744 TP742
TP804 TP802
TP805
R1046
TP217
TP803 R236
TP806 C226
R320
C192
TP656
TP212
R159
R701
IC101
R202
TP1014
TP746
TP790 TP791
R216
R214
TP655 TP654
TP749
TP824
TP823 C204
TP789
C214
TP533
C400
F317
TP751
C373
C1121 C1100
TP113
R229
R575 TP123 TP109 R142 TP132 TP108 R143 TP142 R144 TP106 TP111 TP110 TP566 R145 TP107 TP154 TP153 R141TP567 R199 R148 TP698 TP155 R179 R197 TP508 R167 R121 R702 R122 C140 TP105
L314
C385
R327
C393
R1052 R1051
TP757 TP755
TP763
Q201 F205
C391
R161
C203
TP753
R261 C216
R217
C318
R331
TP579
TP759
R732
R215
TP792 TP793
R235
R233
TP864 R256 R257 R234 TP863 R213 R211 R266 TP338 R264 R265
1-872-46716
11
10
11
12
4-53
RDR-HXD870/HXD970/HXD1070
LF ICT
R3716 C103 R3717 R3715 IC3707 C3738
FC
C163
IC5202
C
R3850 R3848 R3847 R3844 R3843 R3841 CN3802
C4515
C4505
IC4502 R1018 R4511 X1001 C4514 R1811 IC4511 C1043 C1813 R1814 R1813 C1811 R1812 R1009 R1011 C1814 C1815 R1008 C1028 C1030 R1010 R1250 R1251 D4511 C1281 R1210 R1211 C1204 C1035 C1047 C4508 C4501 IC1001 C1042 R5205 R5208 C5213 C5211 IC5203 R5221 C1045 X1002 C1007 C4502
R5206
IC4551
D4551 R3836 R3859 C3804 C3703 C3705 R3738 R5859 R3011 C4581 IC3701 R3112 R3113 R2507
R3704R3705 R3703
R3736
Q3701
D
R3732
R3735 D3712
C1205
D101
D3711
C1210 R2509 R5872 R5871 R5837 R5831 R5834 R5833 C5122 R1066 R5110 C5123 C5116 R5113 R5116 C1314 C1313 IC1302 R1247 R1240 R1279 R1278 R1277 C1214 C1230
C4507
C3211
C2503 R2512 R2510 C2504 R2513 R3229 R3206R3207 R3208 R3225 C3204 C3208C3209C3210R3204R3228 C3205 R3233 R3209 R3205 C2505 R2515
R1286 R1296
R1285 R1295
C3701
R3720 R3721
C3219 D3202
IC3201
R2504 C2502
R3232
CN2301 R2314
R3224 C3216
C3206
R2501 C2501
C2301 R3310 R3302 C2302 R3346 R3301 R2315 R3304R3345 R3305 R3303 R3311 R3344 C3342 C3305 C3304 C3339 C3331 C3330
C3207 C3333 R3313 R3314 C3329 R3315 C3332 R3309 R3308 IC5602 C4558
C5119 C5112 C5113 R5140 C5106 R5123 C5111 R5125 C5109 R5127 R5126 R5128 C5120 R5840 C5121 R5864 C5605 R5865 C1221 C1222 C1219 C1225 C1226 C1227 C1228 C1220
R5631 R5629 R5627 R5624 R5622 R5630 R5628 R5626 R5623 R5606 R5607 C5604
C5807 C5822
C4522
R5848 R5853 R5863 R5838 R5861 R5839 Q5809 R5845 C5819C5820 C4568 R5814R5812 C5601 R5849 R5850 R5818 R5817 IC4562 C4567 JA5801 R5844 R5843 R5842 R4521 C4526 R6001 IC5801 C5708 C5809 IC4521
C3303R3307
C4559
R5688 C5625
C5615
Q5810 R5612 R5866 R5613 C5632 R5801 R5614 R5616 R5617 C4570 IC5802 C5622 R5619 C5630
C5623 D4562
CN5604
1 1
JA5701
CN1402
1-872-466-
31
DIGITAL OUT
16
3
4-56
POWER BLOCK, EMMA BLOCK, VIDEO/AUDIO BLOCK, MEMORY BLOCK, SATA/IDE IF, HDMI/DV/USB BLOCK, DVD DRIVE
RD-065
RDR-HXD870/HXD970/HXD1070
R604 CN103 R322 R242 R238 C199 C203 R244 R240 R236 R243 R239 R201 R245 R241 R237 IC200 C201 C202 R123 R101 R102 R122 R307 R139 R130 R131 R137 C4531 R4531 R4506 C4543 C177 C165 C166 C176 C188 C187 R159 R156 CN501 CN101
R602 CN601
R603 R601
R115 C171
C185
D4531
IC4531
IC4541
D4541 R133 R132 R136 R135 R306 R113 R103 R121 R120 C173 R305 R304 R303 R165 R166 R167 R168 R170 R171 R172 R169
C197
C4532 C4533
C4544 R4541
R3808 R3870 R3809 C537 C536 R507 R506 R504 R503 C532 C516 C504 R505 C510 C507 C506
CN101 CN103 CN501 CN502 CN601 CN3801 CN5101 CN5201 D4571 IC200 IC201 IC501 IC1102 IC1201 IC1301 IC3101 IC3702 IC4531 IC4541 IC4561 IC4571 IC4701 IC4702 IC4703 IC5103 IC5701 Q102 Q1801 Q4581 Q5701 Q5801 Q5802 Q5804 Q5808
A-3 A-2 A-4 B-5 A-5 B-4 E-2 C-2 F-4 A-2 B-2 A-5 B-4 D-2 D-4 D-5 D-5 A-2 A-1 F-3 F-4 D-1 D-1 E-1 E-3 E-2 C-3 D-4 D-5 E-2 E-3 F-3 E-3 E-3
C283 C289 CN3801 R3814 R3816 R3817 R3818 R3820 R3821 R3823 R247 R258 R257 R256 C287 C280 C1105 C1101 C1104 C1113 R106 C178 R230 R231 R126 R312 R233 R127 R232 R129 Q5201 R138 R211 R202 R5207 C5215 C5221 C4539 C5214 C5220 R4503 C4537 C4538 IC4591 C4591 C5209 C5219 CN5201 R5222 C5216 C5204 C5202 C5203 C4536 C4594 C1215 R1012 R1013 C5201 R5225 R5224 R5226 R5217 R5216 R193 R114 R203 R210 C304 R124 C100 C101 C135 C131 C125 R110 C144 R128 R314 IC1102 C3802 C3801 R3815 R3819 R3862 R3822 R3866 R3867 CN502 R3825 D3801 R1132 R3827 R3826 R1153 R1154 R1175 R1161 R1194 R1109 R1195 R1110 R1103 R1106 R1107 R1197 R1163 R1164 R1191
R281
IC201 R248 R249 R250 R251 R252 R253 R254 R255 C284 C291
C282
C134 C137 C121 C147 C136 C109 R301 C153 C1009 C1012 R3708 R3856 R3849 R3855 R3846 R3857 R3845 C3805 C3803 D3802 R3852 R3853 R3854
C4516
C1036
C149 C151 R178 R177 C152 R111 R112 C159 R125 C104 C105 R117 R199 C154 R107 C106 C167 R1181 R1063 C162 R1060 C164 R1182 C1010 C1062 R1111
C1065 C1053 C1052 R1070 C1058 C1064 C1048 R1001 C1040 C1013 R1027 C1063 C1066 R1199 C1025 C1026 C1049 C1068 C1067 C1011 C1008 R1068 C1038 C1027 C1037 C1059 C1014 C1061 C1056 C1060 C1057 R1067 R1016 R1069 C1031
R1801
C1302 C1003 IC1301 C3108 C3103 R3835 R3871 R3711 C3707 R3731 C3702 C3706 C3104 C3102 C3105 R3102 D3101 D3103 R3101 C3101 D3102 D3104 R3012 R3010 R3009 R3008 R3007 R3003 R3006 R3004 R3002 R2301 C2305 R3737 IC3702
R4723
C1216 C1206
C1282 R1212 R1243 R1202 R1244 C1283 R1298 R1288 R1299 R1289
R5829
C1029 C1041 C1033 C1032 R3202 R1030 C1020 R3203 R3201 R1062 C1019 C1018 R1031 R1029 C1016 C1034 C1004 C1006 C1005 C1002 C1015 C1017 C1001
IC3101
R1270 R1231 R1230 C1291 R5115 C5118 C5133R5114 R5117 C5115 C5114 C5117 R5112 R5111
C3110 C3109 R3213 IC3102 R3105 R3214 R3111 R3215 R3212 R3110
R4581 C4585 C3212 C3222 C3221 R3235 R3234 R2302 R3226 R5107 R5108 R5109 R3327 C3322 R3326 R3325 C3335 C3323 C3324 R3322 R3321 C3341 R3342
C5131 R5135 R5134 C5130 C5127 C5126 R5132 C5128 C5124 C5125 R1276
C1212 C1201
IC3203
IC5103
R5133 C5129
R3341
R1401 R1414 R1402 R1403 R1415 R1404 R1405 R1406 R1416 R1407
C1401 R1413
R1260 R1267 C5705 C5707 C5703 R5708 C5701 R5703 C5702 R5701 R5702 C5706 R5846 R5856 C5802 C5804 C5801 C5803 C5805 C5806 R5857 R5858 R5704 C5704 C5813
C5132 R5141 C5110 C5108 C5107 R5636 C5606 R5637 C5607 R5608 R5609 R5692 R5652 C5608 C5609 R5610 R5693 C5631 R5615 R5618 C5616 C5617 C5614 C5628 R5659 C5627 R5658 C5629 C5612 R5661 C5611 C5626 R5657 R5660 R5129
R3320
C3317
C3318
IC5701
R5809 R5805 Q5801 R5854 R5852 R5841 R5835 R5808 R5816 R5851 R5836 Q5802 R5815 R5813 C4563
R5807 R5694 R5611 R5869 R5823 R5821 R5870 R5868 R5822 R5867 C4564
R1412
R4732
R4731
R5707
C5812
D4561 IC4561
C4562 C5603
D4571
1-872-466-
31
16
2
4-57
5
POWER BLOCK, EMMA BLOCK, VIDEO/AUDIO BLOCK, MEMORY BLOCK, SATA/IDE IF, HDMI/DV/USB BLOCK, DVD DRIVE
RD-065
RDR-HXD870/HXD970/HXD1070
A
C111
IC101
LP101
(POWER)
1-873-465C102
11
CN102
CN101
CN106
B
CN105 CN104
VDR103 VDR105
FL102
S102
FL101
CN103
USB B TYPE
16
USB A TYPE
DV IN
1
FL-178 BOARD (SIDE B)
L103
VDR106 VDR101
L105
C104
C103
C105
C106 C112
L104
R107 R103
R104 R108
B
R112 L101
C107
R102 R106
1-873-46516
11
3
4-60E
4-59
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
NC NC NC WDT ACDET HMS_TO_T IR RESET XT1 XT2 VSS1 CF1 CF2 VDD1 MODE1 MODE2 KEY1 KEY2 KEY3 AGC BATTDET FUNC SDET3 SDET2 SDET1 AVLOUT SDA SCL XRESET PA3/SO8 AFT NC XAMUTE RCSEL2 RCSEL1 NC DDCSW1 DDCSW2 VSS4 VDD4 FUNC4 SQUEEZE CAPACTIOR NC BLAIR P_SAVE XSCMUTE AVLTH FLDATA FLSTB
I I I I O I O I I I I I I O I/O O O I I O O O O O O I O O O O O O
Not used Not used Not used Fixed at H Input of ICs VDD detect signal Fixed at H Input of remote control receive signal Input of system reset signal Input of sub-clock (32.768KHz) Output of sub-clock (32.768KHz) Analog GND Input of main-clock (15MHz) Output of main-clock (15MHz) Power supply input Fixed at L Fixed at L Input of function key signal [1] Input of function key signal [2] Input of function key signal [3] Input of auto gain control signal Fixed at H Input of detection signal for euro-scart Fixed at H Input of line 2 S-video detection signal Fixed at H Output of n-link switch signal Input/output of IIC data signal Output of IIC clock signal Output of system reset signal for EURO MSP Not used Input of tuner AFT control signal Not used Input of audio muting signal Output of R/C select signal [2] Output of R/C select signal [1] Not used Output of DDC IC switching signal [1] Output of DDC IC switching signal [2] Analog GND Power supply input Output of detection signal for euro-scart Input of ICs VDD detect signal Not used Output of transmission pulse for G-Link Output of power save signal for AV select ICs Output of SA mute control signal Output of N-link switch drive signal Output of data signal for FLD drive Output of strove signal for FLD driver
5-1
Pin No.
Pin Name
I/O
Function
51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
FLCLK RFTHRU NC FANCTL VDD2 VSS2 P_CONT2 MUTECTL EPGEQ TUON SWVION9V P_CONT FLON SWVION5V MRST NC(IN) CSYNCIN XCHECKER CEC AVLIN MSPSTAT BLANK HOTPLUG TU_DCCON TXD1 RXD1 TXD2 RXD2 HST_TO_M VDDODA CVBSIN GND FILTSLC VDDVCO DTBON ANT5V_SW DET_ANT VSS3 VDD3 DBGP2 DBGP1 DGBP0 LED_PLTB LED_DIVX LED_D_TV LED_A_TV LED_HDD2 DAT_TO_M DAM_TO_T ASCK
O O O O O O O O O O O I I I I I I I O O O I O I I I O I I
Output of clock signal for FLD driver Output of tuner power supply control signal Not used Output of fan direction speed switching signal Power supply input Analog GND Output of system power supply control signal Output of SA mute control signal Output of equalizer switching signal Output of tuner block power supply control signal Output of system power supply control signal Output of switching regulator control signal Output of FLD grid power supply on signal Output of system power supply control signal Input of system reset signal Fixed at L Input of C-synchronization/composite video signal Not used
Input of blanking signal for euro scart Output of tuner power supply control signal Output of serial TXD signal [1] (Not used) Output of serial RXD signal [1] (Not used) Not used Fixed at L Not used Not used Input of composite video signal Analog GND Fixed at L Power supply input Not used Output of system power supply control signal (Not used) Fixed at L Analog GND Power supply input Checking terminal Checking terminal Checking terminal Not used Not used Not used Not used Not used Output of serial data signal to ENC/DEC ICs Input of serial data signal from ENC/DEC ICs Input of serial clock signal from ENC/DEC ICs
5-2
A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 AA1 AA2 AA3 AA4 AA5 AA6 AA19 AA20 AA21 AA22 AA23 AA24 AB1 AB2 AB3 AB4 AB5 AB6 AB19 AB20 AB21 AB22 AB23 AB24 AC1 AC2 AC3 AC4 AC5
DGND DRASB DBA1 DADD01 DDQM1 DQ13 DQ11 DQ08 DIHM Not open to public Not open to public Not open to public Not open to public Not open to public Not open to public Not open to public Not open to public GPIO46 DA2_GND VAY RSET1 VAR RSET0 VAB MD14 LDQM MD5 MD1 MD3 DVDD15(1.5V) GPIO40 AIOBCK RDATA02 RADD03 RADD08 FWEB/GWEB MD2 UDQM MD4 MCLKOUT MD13 DVDD15(1.5V) CTS1B VIOCLK SP1CLK AIOBD SP1STRT RADD15 MA9 MD12 MA10 MCKE MA7
O O O O I/O I/O I/O O O O O O O O I/O O O O I/O O I/O I/O I/O I/O I/O O O O I/O O I/O O I/O I O I/O O O I/O O O O
Digital GND Output of RAS signal Output of bank address [1] Output of DDRSDRAM address [1] Output of data mask [1] Input/output of DDRSDRAM data [13] Input/output of DDRSDRAM data [11] Input/output of DDRSDRAM data [8] Fixed at L Output of power down Output of data [10] Output of data [7] Output of l clock Output of data [3] Output of data [0] Output of vertical synchronization Input/output of DDC data Not used GND (for DAC) Output of DA converter for analog video signal Y Fixed at L Output of DA converter for analog video signal red Fixed at L Output of DA converter for analog video signal blue Input/output of buffer memory interface data bus [14] Output of lower byte data I/O mask control Input/output of buffer memory interface data bus [5] Input/output of buffer memory interface data bus [1] Input/output of buffer memory interface data bus [3] Power supply input Fixed at L Input/output of audio data clock Input/output of ROM/GIO data [2] Output of ROM/GIO address [3] Output of ROM/GIO address [8] Output of ROM/GIO write enable Input/output of buffer memory interface data bus [2] Output of upper byte data I/O mask control Input/output of buffer memory interface data bus [4] Output of clock for SDRAM Input/output of buffer memory interface data bus [13] Power supply input Input of clear to send Output of video pixel clock Fixed at GND Input/output of audio bitstream data Fixed at GND Output of ROM/GIO address [15] Output of buffer memory interface address bus [9] Input/output of buffer memory interface data bus [12] Output of buffer memory interface address bus [10] Output of SDRAM clock enable control Output of buffer memory interface address bus [7]
5-3
Pin No.
Pin Name
I/O
Function
AC6 AC19 AC20 AC21 AC22 AC23 AC24 AD1 AD2 AD3 AD4 AD5 AD6 AD7 AD8 AD9 AD10 AD11 AD12 AD13 AD14 AD15 AD16 AD17 AD18 AD19 AD20 AD21 AD22 AD23 AD24 AE1 AE2 AE3 AE4 AE5 AE6 AE7 AE8 AE9 AE10 AE11 AE12 AE13 AE14 AE15 AE16 AE17 AE18 AE19 AE20 AE21 AE22
PDIAGB MONI3 SP1EN SP1DAT2 VIOD7 SP1DAT7 VIOD6 MA6 MA5 MA1 MA8 MBA DASPB HIOCS16B SFSO SFSCK SFSI SFCS0B AVDD15 AVDD33 AVDD33 AVDD33 AVDD33 TEST1 MONI1 MONI2 SP1ERRB SP1DAT6 SP1DAT5 VIOD5 VIOD3 XA1 CASB MA0 MA4 MA3 PB4 PB1 RLDM WLD WLDM PLED CWAGC CWHP CAD CBC CTEC CRC CBHLPP/CRAPC ADIN AIOLRCK VIOD2 SP1DAT3
Not used Not used Fixed at GND Fixed at GND Input/output of digital video data [7] Fixed at GND Input/output of digital video data [6] Output of buffer memory interface address bus [6] Output of buffer memory interface address bus [5] Output of buffer memory interface address bus [1] Output of buffer memory interface address bus [8] Output of buffer memory interface bank address Not used Not used Output of serial flash interface data Output of serial flash interface clock Input of serial flash interface data Output of serial flash command (address) Power supply input (Analog 1.5V) Power supply input (Analog 3.3V) Power supply input (Analog 3.3V) Power supply input (Analog 3.3V) Power supply input (Analog 3.3V) Not used Not used Not used Fixed at GND Fixed at GND Fixed at GND Input/output of digital video data [5] Input/output of digital video data [3] Input of clock 16.9344MHz Output of buffer memory interface column address strove control Output of buffer memory interface address bus [0] Output of buffer memory interface address bus [4] Output of buffer memory interface address bus [3] Not used Not used Not used Not used Not used Not used Fixed at L Fixed at L Fixed at L Fixed at L Fixed at L Fixed at L Fixed at L Not used Input/output of audio L/R clock Input/output of digital video data [2] Fixed at GND
5-4
Pin No.
Pin Name
I/O
Function
AE23 AE24 AF1 AF2 AF3 AF4 AF5 AF6 AF7 AF8 AF9 AF10 AF11 AF12 AF13 AF14 AF15 AF16 AF17 AF18 AF19 AF20 AF21 AF22 AF23 AF24 AG1 AG2 AG3 AG4 AG5 AG6 AG7 AG8 AG9 AG10 AG11 AG12 AG13 AG14 AG15 AG16 AG17 AG18 AG19 AG20 AG21 AG22 AG23 AG24 AH1 AH2 AH3
SP1DAT4 VIOD1 XA2I WEB MA2 RSAB (PB2) PB5 PB7 RLD REF16 VREFIO P2LD CADO CBHWBL/CID CAMIRR CBPD CAGC CAGC2 CEQDC FE0 TE0 TXD0B RXD0B VIOD4 VIOD0 PB3 PA0 PA4 PB0 PB6 PA3 PA5 PDIN FPDVI FPDVO CREG CBCO WALPF CMIRR CBBD REFQOM REFQOP RFO CDEF FG RFT1/SWRF1/RFP1 RXD1B TXD1B SP1DAT1 PKPULSE1M PKPULSE1P WRPULSEM
Fixed at GND Input/output of digital video data [1] Input/output of clock 16.9344MHz Output of buffer memory interface write enable Output of buffer memory interface address bus [2] Output of buffer memory interface row address strove control Output of buffer memory interface bank address [MA11] Not used Not used Not used Not used Not used Not used Fixed at L Fixed at L Fixed at L Fixed at L Fixed at L Fixed at L Fixed at L Not used Not used Output of transfer data [0] Input of receive data [0] Input/output of digital video data [4] Input/output of digital video data [0] Not used Not used Not used Not used Not used Not used Not used Not used Not used Not used Fixed at L Fixed at L Fixed at L Fixed at L Fixed at L Output of differential RF signal (-) to EFM comparator Output of differential RF signal (+) to EFM comparator Fixed at L Fixed at L Not used Not used Input of receive data [1] Output of transfer data [1] Fixed at GND Not used Not used Not used
5-5
Pin No.
Pin Name
I/O
Function
AH4 AH5 AH6 AH7 AH8 AH9 AH10 AH11 AH12 AH13 AH14 AH15 AH16 AH17 AH18 AH19 AH20 AH21 AH22 AH23 AH24 AJ1 AJ2 AJ3 AJ4 AJ5 AJ6 AJ7 AJ8 AJ9 AJ10 AJ11 AJ12 AJ13 AJ14 AJ15 AJ16 AJ17 AJ18 AJ19 AJ20 AJ21 AJ22 AJ23 AJ24 B1 B2 B3 B4 B5 B6 B7 B8
WRPULSEP HFONP PA7 PA2 H1/FOM G1/FOP F1 E1 REP ASY FCEFM2 PCEFM2 RFI_M RFI_P AGCIN CDEF2 TDRV FDRV RFT2/SWRF2/RFP2 RXD2B SP1DAT0 OFPULSE/WRCKP OFPULSE/WRCKM PKPULSE2/NRZIM PKPULSE2/NRZIP HFONM PA1 PA6 D1 C1 B1 A1 RFN EFM FCEFM1 FCEFM1 EXTR CEQ REQ DAOUT SDRV2 SDRV1 MDRV WRFM/SWRF3/RPF3 TXD2B/GPIO43 DCLKB DCASB DBA0 DADD00 DADD03 DQ12 DQ15 DQ09
Not used Not used Not used Not used Not used Not used Not used Not used Not used Fixed at L Fixed at L Fixed at L Input of differential RF signal (-) to EFM comparator Input of differential RF signal (+) to EFM comparator Fixed at L Fixed at L Not used Not used Not used Input of receive data Fixed at GND Not used Not used Not used Not used Not used Not used Not used Not used Not used Not used Not used Not used Fixed at L Read channel frequency comparator Fixed at L Fixed at L Fixed at L Fixed at L Not used Not used Not used Not used Not used Fixed at GND Output of negative clock for DDRSDRAM Output of CAS signal Output of bank address [0] Output of DDRSDRAM address [0] Output of DDRSDRAM address [3] Input/output of DDRSDRAM data [12] Input/output of DDRSDRAM data [15] Input/output of DDRSDRAM data [9]
5-6
Pin No.
Pin Name
I/O
Function
B9 B10 B11 B12 B13 B14 B15 B16 B17 B18 B19 B20 B21 B22 B23 B24 C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 C14 C15 C16 C17 C18 C19 C20 C21 C22 C23 C24 D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13
DDQM3 Not open to public Not open to public Not open to public Not open to public Not open to public Not open to public Not open to public Not open to public SS0CKIN/GPIO44 DA2_VDD3 COMP1 VAC VREF VAG COMP0 DCLK DWEB DCS0B DADD10 DADD02 DDQS1 DQ14 DQ10 DDQS3 DILM Not open to public Not open to public Not open to public Not open to public Not open to public Not open to public Not open to public SDA1 AOBCK AIOMCK0 DA1_VDD3 DA1_GND VCOMB VRTB DADD06 DADD07 DADD08 DADD11 DCKE DQ30 DQ28 DQ26 DQ24 PHY_D7 PHY_D5 PHY_D3 PHY_D1
O I O O O O O O I/O O I O O O O O O I/O I/O I/O I/O O O O O O O I I/O O I/O O O O O O I/O I/O I/O I/O I/O I/O I/O I/O
Output of data mask [3] Input of monitor sense Output of data [11] Output of data [8] Output of data [5] Output of data [2] Output of data enable Output of HDMI TDMS control Input/output of DDC clock Not used Power supply input (3.3V for DAC) Fixed at L Output of DA converter for video signal chrominance Input of reference voltage Output of DA converter for analog video signal green Fixed at L Output of positive clock for DDRSDRAM Output of command write enable Output of DDRSDRAM chip select [0] Output of DDRSDRAM address [10] Output of DDRSDRAM address [2] Input/output of data strobe [1] Input/output of DDRSDRAM data [14] Input/output of DDRSDRAM data [10] Input/output of data strobe [3] Fixed at H Output of HDMI TDMS control Output of data [9] Output of data [6] Output of data [4] Output of data [1] Output of horizontal synchronization Input of hot plug detect Input/output of serial data Output of audio data clock Input/output of audio master clock [0] Power supply input (3.3V for DAC) GND (for DAC) Fixed at L Fixed at L Output of DDRSDRAM address [6] Output of DDRSDRAM address [7] Output of DDRSDRAM address [8] Output of DDRSDRAM address [11] Output of clock enable Input/output of DDRSDRAM data [30] Input/output of DDRSDRAM data [28] Input/output of DDRSDRAM data [26] Input/output of DDRSDRAM data [24] Input/output of PHY-link data [7] for PHY Input/output of PHY-link data [5] for PHY Input/output of PHY-link data [3] for PHY Input/output of PHY-link data [1] for PHY
5-7
Pin No.
Pin Name
I/O
Function
D14 D15 D16 D17 D18 D19 D20 D21 D22 D23 D24 E1 E2 E3 E4 E5 E6 E7 E8 E9 E10 E11 E12 E13 E14 E15 E16 E17 E18 E19 E20 E21 E22 E23 E24 F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15 F16 F17 F18
CTL1 SCLK LPS SCL1 DCD0B ATX AOLRCK VCOMY VRTY ABI VRBB DADD04 DADD05 DCS1B DADD09 DADD12 DQ31 DQ29 DQ27 DQ25 PHY_D6 PHY_D4 PHY_D2 PHY_D0 CTL0 LREQ LINKON SS0DIN/GPIO45 AOD0 AIBCK0 AIBD0 AIOMCK1 VRBY VCLY AYI DQ19 DDQS0 DDQM0 DQ01 DQ00 DVREF DVDD25(2.5V) DVDD25(2.5V) DVDD25(2.5V) DVDD25(2.5V) DVDD25(2.5V) DGND DGND DGND DGND DGND GPIO54 IR_OUT
I/O I O I/O O O I O O O O I/O I/O I/O I/O I/O I/O I/O I/O I/O O I I O I I/O I I/O I/O O I/O I/O O O
Input/output of PHY/link control [1] for PHY Input of link control clock for PHY Output of link power status Input/output of serial clock Fixed at H Output of digital audio Output of audio L/R clock Fixed at L Fixed at L Input of AD converter for analog video signal green Fixed at L Output of DDRSDRAM address [4] Output of DDRSDRAM address [5] Not used Output of DDRSDRAM address [9] Output of DDRSDRAM address [12] Input/output of DDRSDRAM data [31] Input/output of DDRSDRAM data [29] Input/output of DDRSDRAM data [27] Input/output of DDRSDRAM data [25] Input/output of PHY-link data [6] for PHY Input/output of PHY-link data [4] for PHY Input/output of PHY-link data [2] for PHY Input/output of PHY-link data [0] for PHY Input/output of PHY/link control [0] for PHY Output of link request for PHY Input of LINK on Input of serial data Output of audio bitstream data L/R Not used Input of audio bitstream data [0] Input/output of audio master clock [1] Fixed at L Fixed at L Input of AD converter for analog video signal Y Input/output of DDRSDRAM data [19] Input/output of data strobe [0] Output of data mask [0] Input/output of DDRSDRAM data [1] Input/output of DDRSDRAM data [0] Fixed at L Power supply input Power supply input Power supply input Power supply input Power supply input Digital GND Digital GND Digital GND Digital GND Digital GND Output of audio mute Output of IR transmitter
5-8
Pin No.
Pin Name
I/O
Function
F19 F20 F21 F22 F23 F24 G1 G2 G3 G4 G5 G6 G7 G19 G20 G21 G22 G23 G24 H1 H2 H3 H4 H5 H6 H19 H20 H21 H22 H23 H24 J1 J2 J3 J4 J5 J6 J19 J20 J21 J22 J23 J24 K1 K2 K3 K4 K5 K6 K10 K11 K12 K13
AILRCK0 IR_IN JTDI VRTR ARI VRBR DQ16 DQ17 DQ18 DQ03 DQ02 DVDD25(2.5V) DVDD25(2.5V) JTDO JTMS VCOMR VRTC VRBC ACI DQ22 DQ21 DQ20 DQ06 DQ07 DVDD25(2.5V) EDINT JTRST HLCI VCOMC AD2_VDD3 AD2_GND DDQM2 DDQS2 DQ23 DQ04 DQ05 DVDD25(2.5V) JTCL PH_VDD1 HCBP FCBP PF_GND FSCI PLL_VDD CLK27AOUT CLKPWM0 CLKPWM1 SMCKOUT DVDD25(2.5V) DGND DGND DVDD33(3.3V) DVDD33(3.3V)
I I I I I/O I/O I/O I/O I/O O I I I/O I/O I/O I/O I/O I I I O I/O I/O I/O I/O I I O O O O
Input of audio L/R clock [0] Input of IR receiver Input of EJTAG data Fixed at L Input of AD converter for analog video signal blue Fixed at L Input/output of DDRSDRAM data [16] Input/output of DDRSDRAM data [17] Input/output of DDRSDRAM data [18] Input/output of DDRSDRAM data [3] Input/output of DDRSDRAM data [2] Power supply input Power supply input Output of EJTAG data Input of EJTAG mode set Fixed at L Fixed at L Fixed at L Input of AD converter for video signal chrominance or red Input/output of DDRSDRAM data [22] Input/output of DDRSDRAM data [21] Input/output of DDRSDRAM data [20] Input/output of DDRSDRAM data [6] Input/output of DDRSDRAM data [7] Power supply input Input of EJTAG DINT Input of EJTAG reset Input of H lock clock for video decoder Fixed at L Power supply input (3.3V for ADC) GND (for ADC) Output of data mask [2] Input/output of data strobe [2] Input/output of DDRSDRAM data [23] Input/output of DDRSDRAM data [4] Input/output of DDRSDRAM data [5] Power supply input Input of EJTAG clock Power supply input (1.0V for V DEC) Fixed at L Fixed at L GND (for V DEC) Input of FSC for video decoder Power supply input (1.0V for PLL) Output of 27MHz clock A Output of PWM for 27MHz VCXO [0] Output of PWM for 27MHz VCXO [1] Output of serial clock Power supply input Digital GND Digital GND Power supply input Power supply input
5-9
Pin No.
Pin Name
I/O
Function
K14 K15 K19 K20 K21 K22 K23 K24 L1 L2 L3 L4 L5 L6 L10 L11 L12 L13 L14 L15 L19 L20 L21 L22 L23 L24 M1 M2 M3 M4 M5 M6 M10 M11 M12 M13 M14 M15 M19 M20 M21 M22 M23 M24 N1 N2 N3 N4 N5 N6 N10 N11 N12
DVDD33(3.3V) DVDD33(3.3V) DGNDR HLCO HC_VDD3 FC_VDD3 FSCO PF_VDD1 CLK27AIN PLL_GND CLK27BIN SMDOUT SMDIN DLL_VDD DGND DVDD33(3.3V) DVDD33(3.3V) DVDD33(3.3V) DVDD33(3.3V) DVDD33(3.3V) HXT_CSDA NMI RSTSWB PH_GND AD1_VDD3 CLK24OUT USB_DN0 USB_DP0 USB_H_OCI0 AT1D00 AT1INTRQ DLL_GND TEST_MODE FPIND LVSPOWD DVDD33(3.3V) DVDD33(3.3V) DVDD33(3.3V) SCL0 GPIO02 RADD17 RDATA09 AD1_GND CLK24IN USB_CLKI USB_H_PPON0 USB_D_VBUS AT1D13 AT1D04 DGND DVDD10(1.0V) DVDD10(1.0V) DVDD10(1.0V)
Power supply input Power supply input GND (for RF) Output of H lock clock for video decoder Power supply input (3.3V for V DEC) Power supply input (3.3V for V DEC) Output of FSC for video decoder Power supply input (1.0V for V DEC) Input of 27MHz clock A GND (for PLL) Input of 27MHz clock B Output of serial data Input of serial data Power supply input (1.0V for DLL) Digital GND Power supply input Power supply input Power supply input Power supply input Power supply input Input/output of serial data for HDMI debug Fixed at H Input of system reset GND (for V DEC) Power supply input (3.3V for ADC) Output of 24MHz clock Input/output of USB DInput/output of USB D+ Input of USB over-current status Input/output of IDE I/F data [0] Input of IRQ signal GND (for DLL) Fixed at GND Fixed at GND Fixed at GND Power supply input Power supply input Power supply input Input of serial clock Fixed at L Output of ROM/GIO address [17] Input/output of ROM/GIO data [9] GND (for ADC) Input of 24MHz clock Input of USB clock Output of USB power control Input of USB VBUS Input/output of IDE I/F data [13] Input/output of IDE I/F data [4] Digital GND Power supply input Power supply input Power supply input
5-10
Pin No.
Pin Name
I/O
Function
N13 N14 N15 N19 N20 N21 N22 N23 N24 P1 P2 P3 P4 P5 P6 P10 P11 P12 P13 P14 P15 P19 P20 P21 P22 P23 P24 R1 R2 R3 R4 R5 R6 R10 R11 R12 R13 R14 R15 R19 R20 R21 R22 R23 R24 T1 T2 T3 T4 T5 T6 T10 T11
DVDD10(1.0V) DVDD33(3.3V) AVDD33R RADD24/GPIO03 RDATA14 RADD18 RDATA13 RDATA07 GND USB_D_DN0 USB_D_DP0 USB_D_CONNECT AT1D06 AT1D09 DGND DVDD10(1.0V) DVDD10(1.0V) DVDD10(1.0V) AT0D06 AT0DIOWB AT0D10 RADD25/GPIO04 RADD00/GPIO01 RDATA12 RADD10 RADD12 RADD22 AT1D01 AT1D03 AT1D05 AT1D02 AT1D11 DGND DVDD10(1.0V) DVDD10(1.0V) AT0DIORB AT0D08 AT0D12 AT0D07 GCSB2 GRDYB RDATA15 RADD20 RDATA08 RADD16 AT1D07 AT1D08 AT1D10 AT1CS0B AT1DA2 DGND DVDD10(1.0V) DVDD10(1.0V)
I/O O I/O I/O I/O I/O O I/O I/O O O O I/O O O O I/O I/O I/O I/O I/O O O O O O I I/O O I/O O I/O I/O I/O O O
Power supply input Power supply input Power supply input (3.3V for RF) Fixed at H Input/output of ROM/GIO data [14] Output of ROM/GIO address [18] Input/output of ROM/GIO data [13] Input/output of ROM/GIO data [7] Digital GND Input/output of USB DInput/output of USB D+ Connection control of the pull-up resistance of D+ Input/output of IDE I/F data [6] Input/output of IDE I/F data [9] Digital GND Power supply input Power supply input Power supply input Output of data [06] for IDE I/F Output of DIOW signal for IDE I/F Output of data [10] for IDE I/F Fixed at H Fixed at H Input/output of ROM/GIO data [12] Output of ROM/GIO address [10] Output of ROM/GIO address [12] Output of ROM/GIO address [22] Input/output of IDE I/F data [1] Input/output of IDE I/F data [3] Input/output of IDE I/F data [5] Input/output of IDE I/F data [2] Input/output of IDE I/F data [11] Digital GND Power supply input Power supply input Output of DIOR signal for IDE I/F Output of data [08] for IDE I/F Output of data [12] for IDE I/F Output of data [07] for IDE I/F Output of GIO chip select [2] Input of GIO READY Input/output of ROM/GIO data [15] Output of ROM/GIO address [20] Input/output of ROM/GIO data [8] Output of ROM/GIO address [16] Input/output of IDE I/F data [7] Input/output of IDE I/F data [8] Input/output of IDE I/F data [10] Output of chip select [0] for HDD Output of IDE I/F address [2] Digital GND Power supply input Power supply input
5-11
Pin No.
Pin Name
I/O
Function
T12 T13 T14 T15 T19 T20 T21 T22 T23 T24 U1 U2 U3 U4 U5 U6 U10 U11 U12 U13 U14 U15 U19 U20 U21 U22 U23 U24 V1 V2 V3 V4 V5 V6 V10 V11 V12 V13 V14 V15 V19 V20 V21 V22 V23 V24 W1 W2 W3 W4 W5 W6 W10
AT0D05 AT0IORDY AT0D15 AT0DMARQ GCSB3 GCSB1 RDATA11 RDATA10 RADD19 RDATA05 AT1D12 AT1D14 AT1DA0 AT1IORDY AT1DIOWB DGND AT0DA1 AT0D01 AT0D02 AT0D11 AT0DA2 AT0D13 CTS0B RADD14 RADD13 RADD11 RDATA03 RDATA06 AT1DIORB AT1DMACKB AT1CS1B AT1RESETB AT1DMARQ DGND AT0D09 AT0D04 AT0INTRQ AT0RESETB AT0D00 AT0DMACKB RTS0B/GPIO36 GCSB0 RADD07 RDATA04 RADD05 FCSB0 AT1D15 AT1DA1 MD9 MD6 MD8 DVDD15(1.5V) DGND
O O O O O I/O I/O O I/O I/O I/O O I O O O O O O O I O O O I/O I/O O O O O I O O O O O O O I/O O O I/O O I/O I/O I/O
Output of data [05] for IDE I/F Output of IORDY signal for IDE I/F Output of data [15] for IDE I/F Output of DMARQ signal for IDE I/F Output of GIO chip select [3] Not used Input/output of ROM/GIO data [11] Input/output of ROM/GIO data [10] Output of ROM/GIO address [19] Input/output of ROM/GIO data [5] Input/output of IDE I/F data [12] Input/output of IDE I/F data [14] Output of IDE I/F address [0] Input of I/O ready Output of IDE I/F I/O write for HDD Digital GND Output of address [1] for IDE I/F Output of data [01] for IDE I/F Output of data [02] for IDE I/F Output of data [11] for IDE I/F Output of address [2] for IDE I/F Output of data [13] for IDE I/F Input of clear to send Output of ROM/GIO address [14] Output of ROM/GIO address [13] Output of ROM/GIO address [11] Input/output of ROM/GIO data [3] Input/output of ROM/GIO data [6] Output of IDE I/F I/O read for HDD Output of ACK signal Output of chip select [1] for HDD Output of HDD I/F reset Input of IRQ signal Digital GND Output of data [09] for IDE I/F Output of data [04] for IDE I/F Output of INTRQ signal for IDE I/F Output of reset signal for IDE I/F Output of data [00] for IDE I/F Output of DMC ACK signal for IDE I/F Not used Not used Output of ROM/GIO address [7] Input/output of ROM/GIO data [4] Output of ROM/GIO address [5] Output of ROM chip select Input/output of IDE I/F data [15] Output of IDE I/F address [1] Input/output of buffer memory interface data bus [9] Input/output of buffer memory interface data bus [6] Input/output of buffer memory interface data bus [8] Power supply input Digital GND
5-12
Pin No.
Pin Name
I/O
Function
W11 W12 W13 W14 W15 W19 W20 W21 W22 W23 W24 Y1 Y2 Y3 Y4 Y5 Y6 Y10 Y11 Y12 Y13 Y14 Y15 Y19 Y20 Y21 Y22 Y23 Y24
AT0CS1B AT0CS0B AT0D14 AT0DA0 AT0D03 SP1REQB RADD21 RDATA00 FOEB/GOEB RADD04 FCSB1 MD15 MD11 MD0 MD7 MD10 DVDD15(1.5V) DGND DGND AGND AGND AGND AGND SP0REQB/GPIO33 RADD01 RDATA01 RADD09 RADD06 RADD02
Output of chip select signal [1] for IDE I/F Output of chip select signal [0] for IDE I/F Output of data [14] for IDE I/F Output of address [0] for IDE I/F Output of data [03] for IDE I/F Fixed at GND Output of ROM/GIO address [21] Input/output of ROM/GIO data [0] Output of ROM/GIO enable Output of ROM/GIO address [4] Not used Input/output of buffer memory interface data bus [15] Input/output of buffer memory interface data bus [11] Input/output of buffer memory interface data bus [0] Input/output of buffer memory interface data bus [7] Input/output of buffer memory interface data bus [10] Power supply input Digital GND Digital GND GND (Analog) GND (Analog) GND (Analog) GND (Analog) Fixed at H Output of ROM/GIO address [1] Input/output of ROM/GIO data [1] Output of ROM/GIO address [9] Output of ROM/GIO address [6] Output of ROM/GIO address [2]
5-13
MEMO
5-14E
RDR-HXD870/HXD970/HXD1070
OPEN/CLOSE button
SPEED
2 5 8 0
SPEED button Number button +10 button FRM/TIM button CHAP button ESC button DISP button CX button
4 7
+10
6
TV/LDP
9
CLEAR STEREO
TV/LDP button STEREO button CLEAR button SEARCH button CHP/TIM button DIG/ANA button TEST button
ESC CX
DISP
SIDE B button
SCAN PLAY SCAN
CHAPTER SKIP button SCAN button PAUSE button X3 button REP.A button REP.B button
X3
PAUSE
X3
CHAPTER SKIP button SCAN button PLAY button X3 button P.RUN button A.MON button
SERVICE
DVD
J-6090-203-A
6-1
[Mode / Name]
DISP
DIG/ANA
DISP
2 DIG/ANA 2 times SEARCH DIG/ANA SEARCH < Second screen subscreen 4 > LD degration judgement of ATA/ATAPI DEBUG OSD < Second screen subscreen 3 > writer maintenance information of ATA/ATAPI DEBUG OSD
DISP DISP
3 4 DIG/ANA 3 times
DV Service Mode
DISP
7 DIG/ANA
CHP/TIM DIG/ANA
1 2
Video Adjustment For Specific Area 1 General Setting mode 2 Specific-channel Setting mode
CX
DVD ESC REP.B PLAY Aging mode (DVD) Aging mode (HDD)*3 REP.B PLAY 1 2 Firmware Download 1 Holding user setting V data 2 Shipping mode
6-2
* When the MAIN Assy and/or TUJB Assy that are(is) commonly used with another model are(is) replaced, they(it) must recognize the model of this unit. * Items to be set: The model number, destination, and region No. must be set.
Note: Once the setting has been made, it can never be changed. Be sure to make the setting correctly. As this setting resets the Assy(s) in question to the factory-preset status, it is recommended that you obtain the customers consent beforehand.
5) 6)
Press four digits properly (Refer to page 5 service remote controller.) by using the according to the screen information. Press the following buttons ESC k CHAP k 1 on the service remote controller.
[Recorder's Model Setting] Input the number using the remote for Service. >--Input No. [ 0101 [ 0201 [ 0102 [ 0202 [ 0103 [ 0203 Manufacturer : : : : : : ] ] ] ] ] ]
7)
Disconnect then reconnect the AC power cord of the unit. Be careful not to impart vibration to the unit immediately after the AC power cord is disconnected. 8) Reset the recorder to all its factory settings. (Make sure that the recorder is on. Press and hold x (STOP) key and press 1 (STANDBY/ON) key on the front panel.) The recorder turns off with all settings reset. 9) Turn of the main power ON. 10) Press ESC then DISP keys by using the service remote controller and then confirm each Model Name.
VERSION : - - - : RELEASE_100 Rev :1.****** TUNERCON : 198.000 DRIVE : DVD-RW DVR-L11X 1.00 PIC SERIAL : - - - - HDD INT : - - - - DEVICE : - - - - REGION : 2 FLASH : 64M C : ********* HDCP : - - - - ---SYSCON
OK OK OK
6-3
5)
OK OK OK 160
7 9
Model name/destination Version of the recorder software Revision No. of the system-control computer software Version No. of the tuner microcomputer Result of the combination check with system microcomputer Information on the built-in drive (Model name, version No., model type) Data of the built-in HDD, capacity of the HDD DEVICE information (EMMA type, ES No.) FLASH ROM information Region No. CPRM information (CPRM key No.)
6-4
* The RF signal status can be obtained from the input frequency deviation information and the AGC voltage.
OK OK OK 160
DEVICE : E2R-FE REGION : 2 Input CH : ** ch Freq Diff : Low 1 AGC Volt : **** mV
FLASH : 64M C : ************ Input channel Input frequency difference *1) AGC voltage *2)
*1) Frequency Difference (Freg Diff) How much tuning is off is monitored, as shown below: Input Frequency Faraway High (within 200kHz) Just Tune within 200kHz over 200kHz Display High 7 High 1-5 Center Low 1-5 Low 7
Low
*2) AGC voltage (AGC Volt) The gain controlled by the tuner is monitored to infer the input electric field intensity. (The accuracy of inference differs depending on the product.) Field Intensity Intense field area (Clear image) Less intense field area (Noise may be generated.) Weak field area (Much noise. EPG/VPS/PDC sometimes cannot be obtained.) Very weak field area (Image damaged. EPG/VPS/PDC cannot be obtained.) 70 dB or more 50 dB or more 70 dB or less 30 dB or more 50 dB of less 30 dB or less AGC Volt 3100 mV or less 3100 4400mV 4400 mV or more (It is unable to discriminate under the weak field area.) 4400 mV or more (It is unable to discriminate.)
[Tips] For good reception, the field intensity must be 50 dB or more (AGC Volt 4400 mV or less). For accurate measurement, use a field intensity meter. 5) Press ESC. (Returns to the original screen)
6-5
6-2-5. HDD Information for the HDD return sheet (Simplified measurement mode)
HDD Information How to start/terminate the diagnostic program Use the remote control unit for servicing. How to start: Press ESC, CX, 0, and 1 keys simultaneously. How to terminate: Press ESC key. Do not perform other operations on the unit while HDD diagnosis is in progress. Although the diagnostic program is designed to function independently from the units functions, operations on the unit during a diagnosis may cause a malfunction. The following status is recommended during diagnosis: All stop, no timer recording (including auto-recording) A) Display the menu on the screen. The menu shown below is displayed when the diagnostic program is started. To enter each mode, press the corresponding key 1 4 on the remote control unit for servicing. Tests to be executed 1 HDD Information: Checks the HDD information. 2 S.M.A.R.T. DST: Executes a simplified test or a reading test for all data. 3 HDD R/W Check: Executes a writing/reading test for all data. All data on the HDD will be erased if this test is executed.
Note: 2. S.M.A.R.T. Attribute.... is not used.
[1-4]
HDD Information S.M.A.R.T Attribute Information S.M.A.R.T DST HDD R/W Check
B) Check the HDD information. Press 1 key on the remote control unit for servicing. Check the following data: Model: Is the correct model name of the HDD displayed ? Recog. No: Is a positive value displayed ? SMART threshold: Is not exceeded displayed ?
HDD Information Cylinders : 0x3FFF Heads: 0x0010 Sec/Track : 0x003F Model : Maxtor 4R080L0 Firmware : RAMC1TU0 SN : R22RRL2SE Major No : ATA/ATAPI-7 Life Time : 33h 10m 30s Recog. No : -1 SMART threshold : not exceeded
A D E B C
Detailed description 1 Model: For the correct model name, refer to the display of the unit. 2 Recog No: Positive value : The HDD has been recognized. Negative value : The HDD has not been recognized. 3 SMART threshold: exceeded : The has come near the end of its service life. not exceeded : The HDD has not reached the end of its service life. 4 Check HDD SN.
To return to the menu screen, press Clear key. C) How to check the HDD return sheet. Symptom ************************************* k Enter a symptom. 1 MODEL :***************** not recognize or recognize k Enter a model name. Refer to A of the above screen. When the model name is recognized, circle recognize. 2 RECOG NO:Positive or Negative k Check whether Recog No is positive or negative. Refer to B of the above screen. 3 SMART threshold: exceeded or not exceeded k Check whether SMART threshold is exceeded or not exceeded. Refer to C of the above screen.
Note: If the HDD model name and serial number cannot be read, check the HDD label.
4 Check HDD SN:*********** not recognize or recognize k Enter the HDD SN. Refer to D of the above screen. Check whether the HDD SN is recognized. 5 HDD Life Time: ****h** m ** s k Enter the Life Time. Refer to E of the above screen.
Note: If the HDD life time is not found, check it on page 6-7 of Chapter 6, SERVICE MODE.
6 7 8 9
HDD Status: # / ! / Blank / No Model Name FL Display E01 / E02 / No Problem Recording Error history :************************ ATA/ATAPI History ERR :*********************
k k k k
Check HDD Status. Refer to SERVICE NOTE, page 7. Check FL Display. Refer to SERVICE MODE, page 6-9. Refer to SERVICE MODE, page 6-10.
6-6
HDD Information (Simplified measurement mode) 1) Turn on the main power. 2) Press DISP. 3) Press DIG/ANA three times.
HDD Info
[Tips] How the cumulative HDD-on time data is processed in memory Storage place: FLASH ROM Timing for referring to the cumulative HDD-on time data: If the power attempts to turn on but fails, the unit refers to the FLASH ROM. Timing for updating the cumulative HDD-on time data: While the HDD is on, the cumulative HDD-on time data in the RAM is updated every 3 seconds, and the data is stored in the Backup SRAM every update. When the power is turned off, the data is stored in the FLASH ROM. How to clear the cumulative HDD-on time data FLASH ROM: When the HDD Identification Setting is configured, the cumulative HDD-on time data is automatically cleared. The HDD Identification Setting is automatically configured when the CPRM setting is configured on the CPRM setting screen. (To display the CPRM setting screen, press the ESC key, then the STEREO key.)
Note: The cumulative HDD-on time data is not cleared when resetting to default values. The cumulative HDD-on time data is not cleared when the system-control computer software is downloaded.
4)
Reference: Main specifications for damage to the HDD During operation Shock G (acceleration) Temperature change Moisture change Approx. 20 G or more 15 C/hour or more 20%/hour or more During nonoperation Approx. 200 G or more
Reference: Estimated value of falling distance vs. shock (G) when the HDD is dropped without protection Falling distance 0.5 inch / 12.7 mm 1.0 inch / 25.4 mm 2.0 inch / 50.8 mm 4.0 inch / 101.6 mm Landing surface Granite surface 387 595 1133 1795 Concrete floor 217 457 600 1040 Synthetic-resincoated table 200 310 680 1050 Antistatic sponge 26 37 70 267
6-7
(2) Cautions for handling and examples of dangerous handling for the product that the HDD is mounted on or the HDD repair part [Cautions for handling the product that the HDD is mounted on] The HDD is always in operation while the unit is turned on. Do NOT to apply shock to the unit. Examples of dangerous handling: while the power is on Bumping the case Dropping an object, such as a small screwdriver or remote control unit, onto the case or bumping an object against the cabinet Physically dragging the unit Stacking another product on the unit
Note: Do NOT to apply shock, such as bumping or hitting a screwdriver against the HDD, during diagnosis with the case open.
Examples of dangerous handling: while the power is off Applying strong shock, although the HDD is more resistant to shock when the power is off Dropping the unit from a height of several centimeters, or lifting one side of the unit and letting it drop Do NOT move the unit immediately after the power is turned off. Wait at least 30 seconds after the indication on the FL display changes from POWER OFF to the clock indication before moving the unit. If the AC power cable is accidentally disconnected before turning the unit off, wait at least for one minute before moving the unit. In this case, damage to the HDD caused by sudden shutoff may be small because the emergency relief mechanism is activated. However, if sudden shutoff occurrs during recording or playback, recorded data may be damaged. Be sure to check the operations. [Caution for handling the HDD repair part] 1. Handle the HDD in a safe environment: Handle the HDD over an antistatic pad that can also absorb shock. Wear wrist bands to prevent electrostatic charges generated in your body from affecting the HDD. 2. Observe the following rules when handling the HDD: Handle one HDD at a time. Do NOT hold several HDDs at the same time. Grip the HDD on both sides so that you do not touch its terminals or circuit boards. Do NOT stack one HDD onto another HDD (even if the HDDs are protected by antistatic bags). Do NOT bump the HDDs against one another. Do NOT bump any tool, such as a screwdriver, or other hard object against the HDD. When a repair part (HDD) is transported and there is a large temperature difference between the outside and inside temperature, leave the HDD in its package for about half a day after it is moved inside to gradually cool or warm it to room temperature before unpacking.
6-8
Recording Error History Display Error related to HDD Error Message Description Buf over flow Overflow of the Stream Buffer ESFSYS CORUPT easyfsys error ESFSYS INIT easyfsys initializing HDD Aging NG HDD Aging Command failed HDD DEF DONE HDD defrag finished HDD DEF ERR HDD defrag error HDD DEL OC TT Title imported to the HDD deleted HDD DEL PL Dubbing list deleted by HDD recovery HDD DEL TT Title deleted by HDD recovery HDD Destroy HDD is not recognized on the bus HDD INFO BAD Incorrect HDD Management Data HDD Initialize HDD initialized HDD IRRG POFF Abnormal power off HDD MBR NG Incorrect MBR data HDD SIG NG Incorrect HDD Management Data Magic HDD SMART NG Incorrect HDD SMART HDD unauthor Incorrect HDD serial No. HDD Zero WR Incorrect MBR data HDD Reset Done HDD Reset executed irr astion Incorrect action Mech No Res No response from the mechanical-control computer STATUS NG Abnormal status change Task No Activ Task has not been activated TT Rec Over Title recording time full
Note: Not only the HDD error history, but also the error recovery history are logged in Recording Error History.
6-9
2B 00 00 00 00 00
3C 00 00 00 00 00
01 00 00 00 00 00
EXECUTE DEVICE DIAGNOSTIC FLUSH CACHE IDENTIFY DEVICE IDLE READ DMA READ DMA EXT SET FEATURES SMART STANDBY STANDBY IMMEDIATE WRITE DMA WRITE DMA EXT IDLE IMMEDIATE
OK
NG
Command
EXECUTE DEVICE DIAGNOSTIC FLUSH CACHE IDENTIFY DEVICE IDLE READ DMA READ DMA EXT SET FEATURES SMART STANDBY STANDBY IMMEDIATE WRITE DMA WRITE DMA EXT IDLE IMMEDIATE 90 E7 EC E3 C8 25 EF B0 E2 E0 CA 35 E1
No problem
2B 3540C6E16F6000
Command
6-10
6-2-10. ATA/ATAPI Debugging Screen (Second Screen) and LD Deterioration Judgment (for writer)
1. Writer maintenance information of ATA/ATAPI DEBUG OSD (Subscreen3) 1) Turn of the main power ON. 2) On the screen after exiting all menu screens, press ESC on the service remote controller. 3) Press DISP. 4) Press 2. * Simplified judgment method of optical pickup quality ATA/ATAPI History-ALL 1. Stains on pickup lens 2. Deterioration of CD-R/DVD-RW laser diode
1E --------------------------------1E --------------------------------> 60 --------------------------------1E --------------------------------60 --------------------------------1E --------------------------------1E --------------------------------1E --------------------------------1E --------------------------------Writer is selected.
* Screens are switched when DIG/ANA is pressed two times or three times to select the desired menu. Press SEARCH to start measurement.
Update the display by pressing the SEARCH key while subscreen 3 is displayed.
1 ATA / ATAPI Power ON 0102 : 56 DVD R0053 : 48 W0022 : 16 CD R0034 : 04 W0000 : 00 Writer MaintenanceInfo 00 00 00 0000 00000000 01 00 00 0000 00000000 02 00 00 0000 00000000 03 00 00 0000 00000000 04 00 00 0000 00000000 05 00 00 0000 00000000 06 00 00 0000 00000000 07 00 00 0000 00000000 00-00 Error log for the Writer (Not for Service) 1 Power-on time/cumulative power-on time 2 Duration of emission of the laser diode (LD) for DVD-R/DVD while reading 3 Duration of emission of the LD for DVD-W/DVD while writing 4 Duration of emission of the LD for CD-R/CD while reading 5 Duration of emission of the LD for CD-W/CD while writing (This function is not used for this model.)
2 3 4 5
2 If the total hours of duration of emission of the laser diode (LD) for DVDs while reading 2 and that of emission of the LD for DVDs while writing 3 exceed 4,700 hours, the LDs may be degraded. Perform an LD degradation judgment, using subscreen 4. [Tips] MTTF hours for each LD DVD : 4,700 hours CD : 11,000 hours The ATA/ATAPI Writer Maintenance Info is obtained each time the power is turned on. Thereafter, the data on the subscreen is updated each time the SEARCH key is pressed (the updating command is sent) while this subscreen is displayed. Care must be taken when updating this subscreen, because an undesired command is inserted if it is executed while recording, etc. [Note on lighting time data for each LD] Since data on lighting time of each laser diode (LD) are stored in the flash ROM on the MAIN Assy, after the MAIN Assy is replaced, the data will be cleared. However, after the LOADER Assy is replaced, data on lighting time of each LD will be retained in the MAIN Assy. Therefore, before either the MAIN Assy or LOADER Assy is to be replaced, it is recommended that you write down the lighting time data. 5) Press ESC. (Returns to the original screen)
6-11
2. LD degration judgment of ATA/ATAPI DEBUG OSD (Subscreen 4) 1) While the User Operation screen is being displayed, press ESC on the service remote controller. 2) Press DISP on the service remote controller. 3) Press 2 on the service remote controller. 4) Press DIG/ANA three times.
Note: For correct measurement of items 1 to 4 indicated in the display below, leave the unit at room temperature (25C) for a while before turning it on, and do not load a disc.
To update the value for each item, press the SEARCH key while subscreen 4 is displayed. For details on each item and the conditions of updating the values, see table below.
ATA / ATAPI - LD Degrade 1 2 3 4 5 CD DVD TMP ADJ TLT : : : : 0070 0068 00A3 0067 104% 96% o 41 C o 26 C OK OK
: FFD5
If the results of degradation of the LDs for CDs and DVDs are both NG, replace the drive. 5) Press ESC. (Returns to the original screen)
6-12
* Used for broadly dividing the poorly-reproducible trouble phenomena. * Press DIG/ANA three times to browse the error log.
5)
Error Message Check Method 1) Turn of the main power ON. 2) On the screen after exiting all menu screens, press ESC on the service remote controller. 3) Press DISP. 4) Press 4. 5) Press DIG/ANA. (Select the desired screen.)
RunFnc : ---- Ecl : STDBY Rate : 21 -----------------------------------------------------------------------------------------------------------------------------------------------------------VID : 1000
* Used for localizing the cause of trouble to an approximate area from the error message information.
Recording-related errors are displayed.
Press DIG/ANA three times on the above screen to select the desired screen.
Recording Error History Display 01-06-01 01-06-02 20:05 00:22 30 10 No SysHdr IN Write Error Error message display screen
1 There are two error-log screens, and up to 9 logs are displayed per screen. (generation time [year-month-day, hour: minute: second], error data in simplified description.) [Tips] The two error-log screens can be switched by pressing the SPEED+ or SPEED key. For details on error messages, see table Description of VR-recording-related errors (page 6-14 to 6-16). 6) 7) Subscreen 5 to 11 (These subscreens are not for service use.) Press ESC. (Returns to the original screen)
6-13
Note: Any error message with * is displayed RecErr: on the Subscreen1 of the forth screen.
6-14
Dubbing-Related Errors
ERROR MESSAGE H2D CP SomeNG Mem get NG Strm TransfNG Tracon Tm NG VC Cell Max VC CopyCancel VC FlushC NG VC HDD C Err VC HDD Inf NG VC HDD Info NG VC Idling NG VC Pck Anl NG VC Transf Stp VC TSO BLK NG VC VOBU SizeE V Rsv RzoneNG V2H APP FL NG V2H Aud Ch NG V2H Aud Md NG V2H Aud Stm N V2H SRC Prot V2H Unknown V2H VOBU TMNG V2H V Reso NG H2D CP NoSpec H2D TO HDDRD H2D TO SPRP H2D TO DVDWR DESCRIPTION Other NG HDD DVD copy Video Mode Copy Memory has noe ensured Video Mode Copy Stream Transefer NG Video Mode Copy Tracon tranfer has not been completed Maximum number for Video Mode Copy Cells exceeded Video Mode Copy Copy Cancel Video Mode Copy Flush Cache NG Obtaining Video Mode Copy HDD Cell information failed No information on Video Mode Copy HDD Format failed Video Mode Copy idling NG Analizing Video Mode Copy Pack failed Video Mode Copy Transfer Stop Video Mode Copy TSOBlock transfer has not benn completed Video Mode Copy VOBU Size NG Video Mode Copy Reserve Rzone failed VRHDD APP FLG is OFF VRHDD Audio Channel NG VRHDD Audio mode NG VRHDD Audio Stream Number NG VRHDD Copy prohibitted material VRHDD Other NG VRHDD Play back time of each VOBU is different VRHDD Video resolution NG HDDDVD insufficient free space for copy HDDDVD(VR) Timeout at HDD playing side HDDDVD(VR) Timeout at internal processing HDDDVD(VR) Timeout at HDD recording side
HDD-Related Errors
ERROR MESSAGE Do nothing ESFSYS CORUPT ESFSYS INIT HDD Buff High HDD DEF DONE HDD DEF ERR HDD Destroy HDD INFO BAD HDD Initialize HDD IRRG POFF HDD MBR NG HDDReset Done HDD ROMSUM NG HDD SIG NG HDD SMART NG HDD Trans Err HDD unauthor HDD Zero WR Task No Activ TT Rec Over HDD WRONG TGT extHDD lgnore HDD PFile NG HDD DEL TT HDD DEL PT HDD Del OC TT DESCRIPTION Do nothing for demand easyfsys error easyfsys initializing High-level process executed for the HDD Buffer HDD deflag finished HDD deflag error HDD is not recognized on bus Inconsintent HDD Management Data HDD initialized Abnormal Power off Inconsistent MBR data HDD Reset executed Rom-code check sum NG Inconsistent HDD Management Data magic Inappropriate HDD SMART DMA error in HDD copy transfer Inconsistent HDD serial No MBR was written Task has not been activated Title recording time full Invalid HDD target No is directed External HDD is dismounted Program file installed in HDD is NG Delete the title by HDD recovery Delete the dubbing list by HDD recovery Delete the title moving on the way inside HDD
6-15
Other Errors
ERROR MESSAGE Abort Already open BK BATT Down BK FSYS Dirty BUG BusReset Done Cell Close NG CPRM IC NG Dir Depth Err Disc Fll* DRAM CLR Err DRAM NG Drive Destroy EncModul Hang F Alrdy Exst File cansel FileNot Exist Format Excec Invalid Disc* Invalid Param* Invalid TMVMG Invalid UDF* Invalid VMG* Invalid VTSI Irr Action* MKB REVOKED limit Over* No More Info* No Permission* No Video Now busy* NV Pck DMA Er NV Pck MK Err Ourob Strm NG Over Heat PARAM NO ACCP Process Over Protect Scr* Rec Pause* Relocation Do Repair Excec Something* SRAM NG Status NG* DESCRIPTION Cancellation Extension file is already opened Backup RAM Data has been erased Backup RAM Data has not been written on the File Sys some Bugs Bus Reset has been excecuted Cell Close NG Inappropriate CPRM IC Tree of Directory is too deep No further data can be written because the disc is full Video Mode DRAM (Stream Buffer) Clear failure Abnormality in access to the Work DRAM The Drive has crashed Encorder routine is hung up Extension file is already exist Extension file is canseled Extension file is not exist Formatting has been executed The disc cannot be recognized Invalid parameter Invalid TMP VMGI content Invalid UDF content Invalid VMG content VTSI information of +VR is unusual Incorrect action Error is gaining data Standard maximum limit exceeded No more space in the internal workmanagement area No permossopn to write to the disc No Video input (not locked) In the process of the emergency processing Inappropriate NaviPack DMA Error in creating NaviPack Inappropriate Stream data to the Ouroboros input Abnormal temperature Recording parameter is not matched Process is overfull Source to be recorded is copyprotected No operation permitted during recording pause VR-recording data was relocated Repairing has been executed Undetermined error Abnormality in access to the backup Work SRAM Abnormality in change of statuses ERROR MESSAGE SW PVR SW Vpb mode* SW Vrec mode* Unmatch Stamp* VBR-SRAM NG V Categ ID NG V Cate Inf NG V Ext MAX Ovr V ExtToo Big V Ext TY NG Virgin Disc VOBU Info NG WaterMark Det WM Cracked Param Short Invalid VRMI DESCRIPTION Switch to +VR playback process Switching to video playback routine is required Switching to video recording routine is required Impossible to modify because of nonmatching time stamp Abnormality in VBR SRAM Inappropriate category ID Inappropriate category information Count Max exceeded The extension file is too large Type NG Virgin Disc Inapporopriate VOBU information Watermark detected WM Cracked Editting Error (Clear A-B) Information of +VR is NG (VRMI)
No Error
ERROR MESSAGE Non Err* DESCRIPTION Normal
6-16
No. 1
Description Whether the initialization of UPD72893B (1394 LINK and DV codec IC) has been completed (OK) or not (NG). Whether the initialization of ADV7172 (Video Encoder for DV specific) has been completed (OK) or not (NG). Number of AV devices recognizing connection Number of DV devices recognizing connection GUID set in ConfigROM of the unit. iPCR value of the unit oPCR value of the unit GUID set in ConfigROM of the connected DV device.
2 3 4
Remarks If NG is displayed, it is considered the communication failure to UPD72893B. If NG is displayed, it is considered the communication failure to ADV7172. Identification number of AV devices including D-VHS, Digital Tuner, etc other than DV devices. If the number does not become 01 even if a DV device is connected, identification of that device fails. GUlD : Global Unique ID (Specific ID for DV devices) If the unit is ROOT (IRM), IRM is displayed at the side position of GUID display.
VN MN
Vendor name set in ConfigROM of the connected DV device. Model name set in ConfigROM of the connected DV device. Transport Mode data obtained from the DV device. Transport State data obtained from the DV device. Cassette Type data obtained from the DV device. Write-protection data obtained from the DV device. Power-state data obtained from the DV device. Output signal mode data obtained from the DV device. Connect AV data obtained from the DV device. Camera/Vtr mode data obtained from the DV device. DV device mode Whether Yes (in the process of requesting DV input) or No is indicated in XXX. Input Line System setting Time-code data of the DVdecode Stream, or response data of the Time Code command Rec Date of DVdecode Stream Rec Time of DVdecode Stream Aspect Ratio of DVdecode Stream CGMS of DVdecode Stream (from left to right, CGMS data of bits 5-4: Audio ch 2, bits 3-2: Audio ch 1, and bits 1-0: Video)
Data are displayed only if one DV device is identified. If the connected DV device is ROOT (IRM), IRM is displayed at the side position of GUlD display. Data are displayed only if one DV device is identified. (Depending on the device, the vendor name may not be set in ConfigROM.) Data are displayed only if one DV device is identified. (Depending on the device, the model name may not be set in ConfigROM.) Data are displayed only if one DV device is identified.
Data are displayed only if one DV device is identified. Camera or VTR is displayed only if one DV device is identified. Normally, Yes is indicated only when CH is set to DV.
Stream time-code data are obtained when the tape is played in forward direction. Otherwise, time-code data are obtained through an AV/C command.
RD RT ASPECT CGMS
*CGMS (Copy Generation Management System): The two-digit codes added to broadcast programs represent the following: 00: Copy freely, 10: Once copy, 11 : Never copy With input: Signal type (525-60, 625-50, 1125-60, 1250-50, or Invalid) is indicated, Without input: No is indicated. If SF is 44 kHz, it is considered that 44.1-kHz audio is input, and sound is muted on the unit.
APS trigger bit of DV decode stream With/without DVdecode stream input Sampling Frequency of DVdecode Stream QUANTIZATION of DVdecode Stream AUDIO MODE of DVdecode Stream
5)
6-17
Possible causes Defective IC102 (1394Link & DVcodec)/ IC108 (1394PHY), improper connection between IC102 / IC108, defective soldering, defective power supply, etc.
Defective DV terminals, improper connection of the DVterminal board, defective IC108 (1394PHY), defective cables, an IEEE 1394 device other than the DV device connected. Defective IC102 (1394Link & DVcodec), defective soldering, defective power supply, etc. Defective DV terminals, improper connection of the DVterminal board, defective source device defective IC102 (1394Link & DVcodec), IC108 (1394PHY)
Note: As to a model having the Input Line System setting, if the setting and the actual input signal system do not match, no picture appears.
2. Simple Diagnosis of DV Location in the Items to be Checked, and Conditions Symptoms Debug Screen Check the initDV indication: No operation for 1 DV1 OK: Initialization of DV related LSI (IC102, IC108) appropriately completed. DV input NG: Initialization of DV related LSI (IC102, IC108) has not been completed properly. Defective communication with DV related LSI (IC102, IC108) and Host u-com. (IC1001) 2 DV1 Check the number of DV devices when one DV device is connected to the recorder: 01 : The connected DV device is correctly identified. Other than 01 : The connected DV device is not correctly identified. 1 DV8 Check of DV decoding when the recorder channel is set to DV: No picture nor sound for DV Yes : The recorder is in the process of a DV input operation. input No : The recorder is not executing a DV input operation. Check DEC: 2 DV0 525-60 : An NTSC DV signal is input from the DV device. 625-50 : A PAL DV signal is input from the DV device. No : No DV signal is input from the DV device.
6-18
DV0
Check CGMS:
Recording cannot be performed for a copy-protected source. An audio signal with 44.1-kHz sampling frequency is muted.
DVqa
DV1
Check SF: 32 kHz: An audio signal with 32-kHz sampling frequency is being input. 48 kHz: An audio signal with 48-kHz sampling frequency is being input. 44 kHz: An audio signal with 44.1-kHz sampling frequency is being input. Check the initVE indication: OK: Initialization of DV specific VideoEncoder (IC101) appropriately completed. NG: Defective communication with DV specific VideoEncoder (IC101) and HOST u-com (IC1001). Initialization of DV specific VideoEncoder (IC101) has not been completed properly.
Defective IC101 (DV specific VideoEncoder), defective soldering, defective power supply, etc.
* Used when the EPG data cannot be acquired. * The detailed screen appears every time when DIG/ANA is pressed.
EPG Data Receive Err Summary Data Start End MD CH RcvPkt 03/31 13:00 13:30 DL 03 001853 03/31 09:00 11:00 DL 03 001192 03/31 08:00 08:05 HS -- 000654 03/31 00:00 00:00 000000 03/31 00:00 00:00 000000 03/31 00:00 00:00 000000
Lines 01-02
The next download starting time for the EPG data is displayed. Next Data Download Time: Starting time Duration: Duration required for acquiring the EPG data The Gemster EPG data cannot be found. Number times of Host Scan and Schedule Download, DT models only (Always 00 except DT model) The 6 latest error logs when EPG data were received are displayed, with the latest one at the top. Data Start End MD CH RcvPkt Total Err : Month/day when reception started : Time when reception started : Time when reception ended : Method for acquiring the EPG data (HS: Host scanning process, DL:Downloading process of the EPG data) : Data-receiving channel : Total number of received packages. A number 999,999 or greater is displayed as 999999. : Total errors during reception. The sum of Hamming Err, Trans Err InvLine Err numbers indicated on the Detail screen. A number 999,999 or greater is displayed as 999999.
[Tips] In a case where only HS is displayed in the MD column of the logs, the host channel has not been found. It is necessary to check the country and postal-code settings in the user settings. 5) Press ESC. (Returns to the original screen)
6-19
2. Detail screens 1) Press the DIG/ANA key while the Summary screen is being displayed. (Refer to page 6-19) 2) Each time the DIG/ANA key is pressed, the Detail screen scrolls maximum six-Detail screens (1 to 6). Each Detail screen of 1 to 6 corresponds to the EPG reception error logs from the top of the Summary screen.
0 1 2 3 4 012345678901234567890123456789012345678901234567 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 (EPG EURO) EPG Data Receive Err Details - 1 Data : 03/31 Start Time : 13:00 Host CH : 03
Data Receive Part Total Err : 000000 Pkt Rcv Num : 001853 Pkt Snd Num : 001853 Inv Line Err : 000000 Slice Cont : Auto EQ : OFF LV : -h Temporary Buffer Information Pool Num : 000000 Max Store : 000000 Discard Pkt : 000000 Use Num : 000000
Line Line 01
Data Start Time END Time Host CH P-ON Kind Total Err
Description The rightmost figure represents the number of the current detail screen. This number corresponds to the order of the EPG reception error log from the top. : Month/day when reception started : Time when reception started : Time when reception ended : Data-receiving channel : Methods for acquiring the EPG data (host scanning and downloaing) : Total numbers of errors during reception. The total number of Hamming Err, Trans Err and InvLine Err indicated on the Detail screen. A number 999,999 or greater is displayed as 999999. : Total number of received packages. A number 999,999 or greater is displayed as 999999. : Total number of packages that were sent to the application program among all the received packages. A number 999,999 or greater is displayed as 999999. : Total number of errors that were generated by receiving data from invalid lines. A number 999,999 or greater is displayed as 999999. : Slice level control Auto-Tu Con, Manual - Syscon. : Equalizer setting (ON, OFF) : Slice level (10-30 hex) (Only when the slice Cont is Manual.)
Remarks
Only during initialization, host scanning is automatically executed to find the host broadcast.
Total Errors: If the total number of errors reaches two digits or greater, it is likely that EPG data acquisition failed. Display subscreen 1 of the first screen and check the electric field intensity from the AGC level. If the total numbr of received packages is 0, it is likely that the country and postal-code settings are wrong.
InvLine Err
Slice Cont EQ LV
Note: The data on lines 12-14 are for software development, not for service use.
5)
6-20
Aging for the DVD-RW/+RW/-RAM During Aging mode, the following operations are repeated in the order shown below. 1 The tray opens. 2 The tray closes. 3 Initialization 4 Recording for 60 minutes 5 Playback for 45 minutes <DVD-RW> The initialization process in step 3 follows the setting specified in Setting of the main unit--Recording-Auto initialization of a DVD-RW. <DVD+RW> The initialization process in step 3 is the same as that described in Disc setting--Initialization-Initialization of a DVD+RW. <DVD-RAM> In the initialization process in step 3, physical formatting is performed, if required. During Aging, the number of loops is indicated on the FL display, as shown below. [AGING 0001] If an error is generated, the aging operation stops.
Note: Indications on the FL display are retained, and this information is also retained as an OSD.
Aging for the DVD-R/+R During Aging mode, the following operations are repeated in the order shown below. 1 The tray opens. 2 The tray closes. 3 Recording for 1 minute 4 Recording pause for 6 minutes 5 Recording stops. 6 Playback for 1 minute 7 Playback pause for 6 minutes 8 Playback stops.
Note: A continuous test of the above operations is possible for approximately 23 hours.
After 2 the tray closes, disc detection is performed, <DVD-R> In step 2, if the disc is judged to have recorded up to 99 titles, the operation stops at that point. <DVD+R> If the disc is judged to have recorded up to 49 titles, the operation stops at that point. On the FL display, the number of loops is retained. On the OSD display, the error indication is retained. During Aging, the number of loops is indicated on the FL display, as shown below. [AGING 0001] If an error is generated, the aging operation stops.
Note: Indications on the FL display are retained, and this information is also retained as an OSD. Note: Recording time depends on the recording rate set. For example, if the recording rate is MN32, only up to 60 titles can be registered. Check the setting for recording rate before performing aging.
9)
Press the ESC key on the service remote controller to quit Aging mode and return to Normal mode.
Note: If during recording: Recording is stopped. (aging for RW/-RAM only) If during playback: Playback is paused. If during initialization: The unit stops after initialization is finished. If the tray is being opened/closed: The unit stops after the tray is opened/closed.
6-21
2. Aging for the HDD Caution: Take caution as the all recorded data of HDD is deleted. 1) 2) 3) 4) 5) Turn of the main power ON. Press the HDD key to switch to HDD. Press ESC on the service remote controller. Press REP.B on the service remote controller. Press PLAY to the Aging mode.
During Aging mode, the following operations are repeated in the order shown below. 1 Erasure of all the memory data from the HDD 2 Recording for 60 minutes 3 Playback for 60 minutes [Tips] During Aging, the number of loops is indicated on the FL display, as shown below. [AGING 0001] If an error is generated, the aging operation stops.
Note: Indications on the FL display are retained, and this information is also retained as an OSD.
6)
Press the ESC key on the service remote controller to quit Aging mode and return to Normal mode.
Note: If during recording: Recording is stopped. If during playback: Playback is paused. If during erasure of all memory data from the HDD, the unit stops after all memory data have been erased.
###HDD[INT] is selected
6)
6-22
4)
[Entry from the individual setting mode] 1) Upon completion of the above operation, press DIG/ANA. Setting screen
VDEC Specific Area Mode Ver 2.00 Input - [LINE] Sync ACC : -H Threshold Level : -V Threshold Level : -Individual setting state Input Channell - [0V] Sync ACC : -H Threshold Level : -V Threshold Level : --
2)
6-23
5)
[Tips] As the setting value becomes greater, jitter is reduced on a CRT display. However, as lines for characters appear thick, complex characters may become difficult to read. On the contrary, as the setting value becomes smaller, jitter increases on a CRT display. However, as lines for characters become sharper, complex characters become more legible.
Note1: A new setting becomes active as soon as it is made. As a new setting is stored in nonvolatile memory, it will be retrieved when the unit it turned on the next time. Note2: After the factory-preset values are downloaded, the setting value for the OSD Filter will be the default Value (4).
[Key operation of OSD Filter setting] Key Operation Satting value 0 4 (Default value: 4) Remarks Rev x 3, SPEED+ : The setting value increases by1. x 3 Fwd, SPEED : The setting value decreases by1.
Rev x 3, SPEED+ Changing the setting value for the OSD x 3 Fwd, SPEED Filter CLEAR ESC The setting value is reset to default. To exit the OSD Filter Setting and clear the screen (Appears the tuner screen.)
6-24E
SECTION 7 ADJUSTMENTS
7-1. Video System Adjustment
RDR-HXD870/HXD970/HXD1070
Preparing for Adjustment 1. Equipments Oscilloscope Reference Disk HLX-507 (PAL single layer disc) J-6090-077-A HLX-506 (PAL dual layer disc) J-6090-078-A 1. Video Output Level Check <Purpose> This check is made to satisfy the PAL signal standard, If it is adjusted incorrectly, brightness will be too bright or too dark. Mode PLAY Signal 100% Color bars Test point Output (VIDEO) connector (terminated in 75) Instrument Oscilloscope Specification 1.0 V 0.07 Vp-p Check method: 1) Insert the PAL reference disc and play back the 100% color bars. 2) Confirm that the video level is 1.0 V0.07 Vp-p.
2. S-Video Output S-Y Check <Purpose> This check confirms that the S-video Y-signal output has the rated amplitude. If it adjusted incorrectly, the playback video signal will not be displayed corrected even when the S-video cable is connected. Mode PLAY Signal 100% Color bars Test point S-VIDEO OUTPUT (S-Y) connector (terminated in 75) Instrument Specification Oscilloscope 1.0 V0.07 Vp-p
Check method: 1) Insert the PAL reference disc and play back the 100% color bars. 2) Confirm that the video level is 1.0 V0.07 Vp-p.
1.0 0.07Vp-p
Fig. 7-2
Fig. 7-1
7-1
3. S-Video Output S-C Check <Purpose> This check confirms that the S-video output S-C conforms to the PAL standard. If it adjusted incorrectly, the playback color will not be too dark or too thin. Mode PLAY Signal 100% Color bars Test point S-VIDEO OUTPUT (S-C) connector (terminated in 75) Instrument Specification Oscilloscope 300 mV30 mVp-p
Check method: 1) Insert the PAL reference disc and play back the 100% color bars. 2) Confirm that the burst signal level is 300 mV30 mVp-p.
5. Component Video Output B-Y (Pb) Check <Purpose> This check confirms that the B-Y signal of the component video conforms to the PAL standard. If this signal level is not correct, color of the video signal will have different color when the COMPONENT connector output signal is connected to a projector having COMPONENT input. Mode PLAY Signal 100% Color bars Test point COMPONENT VIDEO OUT (Pb) connector (terminated in 75) Instrument Oscilloscope Specification 700 mV50 mVp-p Check method:
Note 1: Do not set RGB OUT to ON. Note 2: Do not connect the HDMI OUT.
1)
300 30 mVp-p
2)
Insert the PAL reference disc and play back the 100% color bars. Confirm that the burst signal level is 700 mV50 mVp-p.
Fig. 7-3
4. Component Video Output Y Check <Purpose> This check confirms that the component Y signal output has the rated amplitude. If this signal level is not correct, brightness of the video signal will not be too dark or too thin when the COMPONENT connector output signal is connected to a projector having COMPONENT input. Mode PLAY Signal 100% Color bars Test point COMPONENT VIDEO OUT (Y) connector (terminated in 75) Instrument Oscilloscope Specification 1.0 V0.07Vp-p Check method:
Note 1: Do not set RGB OUT to ON. Note 2: Do not connect the HDMI OUT.
700 50 mVp-p
Fig. 7-5
6. Component Video Output R-Y (Pr) Check <Purpose> This check confirms that the R-Y signal of the component video conforms to the PAL standard. If this signal level is not correct, color of the video signal will have different color when the COMPONENT connector output signal is connected to a projector having COMPONENT input. Mode PLAY Signal 100% Color bars Test point COMPONENT VIDEO OUT (Pr) connector (terminated in 75) Instrument Oscilloscope Specification 700 mV50 mVp-p Check method:
Note 1: Do not set RGB OUT to ON. Note 2: Do not connect the HDMI OUT.
1) 2)
Insert the PAL reference disc and play back the 100% color bars. Confirm that the Y signal level is 1.0 V0.07 Vp-p.
1)
1.0 0.07Vp-p
2)
Insert the PAL reference disc and play back the 100% color bars. Confirm that the burst signal level is 700 mV50 mVp-p.
Fig. 7-4
700 50 mVp-p
Fig. 7-6
7-2
7. Scart Video Output Level Check <Purpose> This check is made to satisfy the PAL signal standard, If it is adjusted incorrectly, brightness will be too bright or too dark. Mode PLAY Signal 100% Color bars Test point Scart Video output connector pin-ql (terminated in 75) Instrument Oscilloscope Specification 1.0 V 0.07 Vp-p Check method:
Note: SCART OUT should be set to Video.
9. Scart Video Output S-C Check <Purpose> This check confirms that the Scart output S-C conforms to the PAL standard. If it adjusted incorrectly, the playback color will not be too dark or too thin. Mode PLAY Signal 100% Color bars Test point Scart Video output connector pin-qg (terminated in 75) Instrument Specification Check method:
Note: SCART OUT should be set to S-Video.
1) 2)
Insert the PAL reference disc and play back the 100% color bars. Confirm that the video level is 1.0 V0.07 Vp-p.
1) 2)
Insert the PAL reference disc and play back the 100% color bars. Confirm that the burst signal level is 300 mV30 mVp-p.
300 30 mVp-p
Fig. 7-7
8. Scart Video Output S-Y Check <Purpose> This check confirms that the Scart Y-signal output has the rated amplitude. If it adjusted incorrectly, the playback video signal will not be displayed corrected even when the Scart cable is connected. Mode PLAY Signal 100% Color bars Test point Scart Video output connector pin-ql (terminated in 75) Instrument Oscilloscope Specification 1.0 V0.07 Vp-p Check method:
Note: SCART OUT should be set to S-Video.
Fig. 7-9
10. Scart Video RGB Output R Check <Purpose> This check confirms that the RGB R signal output has the rated amplitude. If this signal level is not correct, brightness of the video signal will not be too dark or too thin when the Scart connector output signal is connected to a projector having Scart input. Mode PLAY Signal 100% Color bars Test point Scart Video output R connector pin-qg (terminated in 75) Instrument Oscilloscope Specification 700 mV50 mVp-p Check method:
Note 1: RGB OUT should be set to ON. Note 2: Do not connect the HDMI OUT.
1) 2)
Insert the PAL reference disc and play back the 100% color bars. Confirm that the video level is 1.0 V0.07 Vp-p.
1) 2)
Insert the PAL reference disc and play back the 100% color bars. Confirm that the R signal level is 700 mV50 mVp-p.
700 50 mVp-p
7-3
11. Scart Video RGB Output G Check <Purpose> This check confirms that G signal of the RGB video conforms to the PAL standard. If this signal level is not correct, color of the video signal will have different color when the Scart connector output signal is connected to a projector having Scart input. Mode PLAY Signal 100% Color bars Test point Scart Video output G connector pin-qa (terminated in 75) Instrument Oscilloscope Specification 700 mV50 mVp-p Check method:
Note 1: RGB OUT should be set to ON. Note 2: Do not connect the HDMI OUT.
1) 2)
Insert the PAL reference disc and play back the 100% color bars. Confirm that the G signal level is 700 mV50 mVp-p.
700 50 mVp-p
Fig. 7-11
12. Scart Video RGB Output B Check <Purpose> This check confirms that the B signal of the RGB video conforms to the PAL standard. If this signal level is not correct, color of the video signal will have different color when the Scart connector output signal is connected to a projector having Scart input. Mode PLAY Signal 100% Color bars Test point Scart Video output B connector pin-7 (terminated in 75) Instrument Oscilloscope Specification 700 mV50 mVp-p Check method:
Note 1: RGB OUT should be set to ON. Note 2: Do not connect the HDMI OUT.
1) 2)
Insert the PAL reference disc and play back the 100% color bars. Confirm that the B signal level is 700 mV50 mVp-p.
700 50 mVp-p
Fig. 7-12
7-4E
RDR-HXD870/HXD970/HXD1070
The mechanical parts with no reference number in the exploded views are not supplied. Color Indication of Appearance Parts Example: KNOB, BALANCE (WHITE) . . . (RED) Parts Color Cabinets Color
The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.
7 8
not supplied
5
not supplied
4 2 1
Chassis section
4
not supplied
Ref. No. 1 1 2 2 2
Part No.
Description
Remarks
Ref. No. 2 * 3 4 5 5 6 6 6
Part No.
Description
Remarks
X-2176-442-1 COVER ASSY, TRAY (AEP, UK) X-2177-245-1 COVER ASSY, TRAY (AUS) A-1259-528-A PANEL BLOCK ASSY, FRONT (BLACK) (HXD870(BLACK):AEP1, AEP3, UK) A-1267-797-A PANEL BLOCK ASSY, FRONT (SILVER) (HXD870(SILVER):AEP1, AEP3, UK) A-1267-983-A PANEL BLOCK ASSY, FRONT (HXD870(BLACK):AEP2) A-1268-004-A PANEL BLOCK ASSY, FRONT (HXD870(SILVER):AEP2) A-1268-009-A PANEL BLOCK ASSY, FRONT (HXD970:AEP1, AEP3, UK) A-1268-031-A PANEL BLOCK ASSY, FRONT (HXD1070:AEP1, UK) A-1268-074-A PANEL BLOCK ASSY, FRONT (HXD970:AEP2) A-1268-084-A PANEL BLOCK ASSY, FRONT (HXD1070:AEP2) A-1367-716-A PANEL BLOCK ASSY, FRONT (BLACK) (HXD870(BLACK):AUS) A-1367-717-A PANEL BLOCK ASSY, FRONT (SILVER) (HXD870(SILVER):AUS)
A-1367-718-A PANEL BLOCK ASSY, FRONT (HXD970:AUS) 1-834-077-11 CABLE, FLEXIBLE FLAT (FLR-012) 3-077-331-01 +BV3 (3-CR) 3-070-883-41 SCREW, TAPPING (SILVER) (HXD870(SILVER)) 3-070-883-71 SCREW, TAPPING, CASE (BLACK) (HXD870(BLACK):AEP, UK/HXD970(BLACK):AEP, UK/HXD1070) 2-899-646-01 CASE (DT), UPPER (BLACK) (EXCEPT HXD870(SILVER)) 2-899-646-21 CASE (DT), UPPER (SILVER) (HXD870(SILVER)) A-1382-868-A CASE (DT), BLOCK ASSY (SERVICE) (BLACK) (HXD870:AUS/HXD970:AUS) A-1382-874-A CASE (DT), BLOCK ASSY (SERVICE) (SILVER) (HXD870:AUS) 3-076-563-11 SCREW, SPECIAL FRONT POINT 1-480-167-11 REMOTE COMMANDER (RMT-D248P) (AEP, UK) 1-480-526-11 REMOTE COMMANDER (RMT-D2480) (AUS)
2 2 2 2 2 2 2
6 7 8 8
8-1
51
not supplied
not supplied
55
not supplied
51 53 68 51
57 56
not supplied
51 63 54
U301
66 67
51
51
58
51
51 52
not supplied not supplied not supplied
not supplied
64 60
61 62
51 54 51
not supplied
not supplied
not supplied
51
Ref. No. 51 9 52 9 52 53 54 0 55 * 56 57 58 59 60 60 60 60
Part No. 3-077-331-01 A-1271-316-A A-1382-914-A 7-682-947-01 4-237-065-01 1-474-047-11 1-834-073-11 1-787-624-11 1-834-075-11 3-077-331-31
Description
Remarks
Ref. No. 60
Part No.
Description
Remarks
+BV3 (3-CR) DRW-U12SO S COMPL DRW-U12EM (HDD)ASSY S COMPL (AUS) SCREW +PSW 3X6 CLAMP (L35) REGULATOR SWITCHING (SRV2057EK) CABLE, FLEXIBLE FLAT (FAD-008) FAN, DC CABLE, FLEXIBLE FLAT (FRA-006) +BV3 (3-CR)
A-1318-134-A HDD(S-TONKA2-S(160GB)-E)ASSY (HXD870:AEP, UK) 1-834-072-11 1-834-074-11 1-834-168-11 1-965-191-11 7-621-255-55 2-684-970-01 3-087-220-01 3-268-333-02 1-693-743-11 1-693-741-11 Note : CABLE, FLEXIBLE FLAT (FAR-006) CABLE, FLEXIBLE FLAT (FAR-007) CABLE, FLEXIBLE FLAT (FVR-001) HARNESS (RH-059) SCREW +P 2X8 (AEP2) SHIELD TAPE 1 (A) TAPE, NON-HOLOGENE SHIELD, GASKET TUNER (TUPADTC-D101HB) TUNER (TMFE2-407A)
61 62 * 63 64 65 66 * 67 68 0 U301 0 U601
A-1314-555-A HDD(S-GALAXY-S (250GB)-E)ASSY (HXD970:AEP, UK) A-1314-556-A HDD(S-GALAXY-S (500GB)-E)ASSY (HXD1070) A-1314-557-A HDD(W-XL160-S (160GB)-GA)ASSY (HXD870:AUS) A-1317-949-A HDD(S-GALAXY-S (250GB)-GA)ASSY (HXD970:AUS)
The components identified by mark 9 contain confidential information. Strictly follow the instructions whenever the components are repaired and/or replaced. The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.
Note :
8-2
AV-114
8-2. ELECTRICAL PARTS LIST
NOTE: Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set. -XX, -X mean standardized parts, so they may have some difference from the original one. Items marked * are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. CAPACITORS: uF: F Ref. No. Part No. Description RESISTORS All resistors are in ohms. METAL: metal-film resistor METAL OXIDE: Metal Oxide-film resistor F: nonflammable COILS uH: H SEMICONDUCTORS In each case, u: , for example: uA...: A... , uPA... , PA... , uPB... , PB... , uPC... , PC... , uPD..., PD... Remarks Ref. No. C301 C302 C303 C305 C306 C307 C308 C309 C310 C311 C312 C314 C315 C316 C318 C319 C320 C322 C323 C324 C326 C328 C329 C401 C402 C403 C404 C406 C407 C408 C409 C410 C411 C412 C413 C414 C415 C418 C419 C420 C421 C422 C423 C424 C428 Part No. 1-164-156-11 1-164-156-11 1-126-933-11 1-164-156-11 1-164-156-11 1-126-933-11 1-126-933-11 1-164-156-11 1-164-156-11 1-126-934-11 1-126-933-11 1-164-156-11 1-126-933-11 1-126-933-11 1-164-156-11 1-126-933-11 1-126-933-11 1-162-927-11 1-100-162-91 1-164-156-11 1-126-964-11 1-165-621-91 1-164-156-11 1-115-156-11 1-162-927-11 1-162-927-11 1-115-156-11 1-107-826-11 1-165-908-11 1-165-908-11 1-165-908-11 1-165-908-11 1-165-908-11 1-165-908-11 1-107-826-11 1-164-156-11 1-164-156-11 1-115-156-11 1-165-908-11 1-165-908-11 1-165-908-11 1-165-908-11 1-165-908-11 1-165-908-11 1-107-826-11
When indicating parts by reference number, please include the board name. The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.
Description CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP ELECT ELECT CERAMIC CHIP CERAMIC CHIP ELECT ELECT CERAMIC CHIP ELECT ELECT CERAMIC CHIP ELECT ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.1uF 100uF 0.1uF 0.1uF 100uF 100uF 0.1uF 0.1uF 220uF 100uF 0.1uF 100uF 100uF 0.1uF 100uF 100uF 100PF 1uF 0.1uF 10uF 0.1uF 0.1uF 1uF 100PF 100PF 1uF 0.1uF 1uF 1uF 1uF 1uF 1uF 1uF 0.1uF 0.1uF 0.1uF 1uF 1uF 1uF 1uF 1uF 1uF 1uF 0.1uF
Remarks 25V 25V 16V 25V 25V 16V 16V 25V 25V 16V 16V 25V 16V 16V 25V 16V 16V 50V 50V 25V 50V 50V 25V 10V 50V 50V 10V 16V 10V 10V 10V 10V 10V 10V 16V 25V 25V 10V 10V 10V 10V 10V 10V 10V 16V
AV-114 (CG) BOARD (not supplied) (AEP, UK) AV-114 (AS) BOARD (not supplied) (AUS) (Ref.No.;10000 series) ************************************** < CAPACITOR > C104 C105 C106 C107 C109 C110 C111 C112 C113 C114 C115 C118 C120 C121 C122 C123 C124 C125 C126 C127 C131 C132 C133 C134 C135 C138 C139 C140 C141 C142 C149 C150 C152 C156 C157 C202 C204 C205 C206 C208 1-104-662-91 1-164-156-11 1-164-156-11 1-162-959-11 1-164-156-11 1-165-908-11 1-162-919-11 1-162-919-11 1-115-156-11 1-162-915-11 1-162-915-11 1-115-456-21 1-164-156-11 1-115-156-11 1-115-156-11 1-104-655-91 1-164-156-11 1-164-156-11 1-164-156-11 1-126-933-11 1-164-156-11 1-164-156-11 1-164-156-11 1-164-156-11 1-164-156-11 1-126-961-11 1-164-156-11 1-164-156-11 1-115-156-11 1-100-831-91 1-162-915-11 1-115-156-11 1-115-156-11 1-164-156-11 1-107-826-11 1-164-156-11 1-126-933-11 1-104-662-91 1-164-315-11 1-107-826-11 ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP DOUBLE LAYER CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT ELECT CERAMIC CHIP CERAMIC CHIP 22uF 0.1uF 0.1uF 330PF 0.1uF 1uF 22PF 22PF 1uF 10PF 10PF 0.22F 0.1uF 1uF 1uF 470uF 0.1uF 0.1uF 0.1uF 100uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 2.2uF 0.1uF 0.1uF 1uF 0.001uF 10PF 1uF 1uF 0.1uF 0.1uF 0.1uF 100uF 22uF 470PF 0.1uF 20% 20% 25V 25V 25V 50V 25V 10V 50V 50V 10V 50V 50V 5.5V 25V 10V 10V 6.3V 25V 25V 25V 16V 25V 25V 25V 25V 25V 50V 25V 25V 10V 50V 50V 10V 10V 25V 16V 25V 16V 25V 50V 16V
20%
20% 20%
5%
20% 20% 5%
20%
20%
20%
2% 0.5PF
10%
8-3
AV-114
Ref. No. C431 C432 C434 C435 C436 C437 C438 C439 C440 C441 C442 C443 C444 C445 C446 C447 C450 C451 C452 C453 C454 C455 C456 C457 C458 C460 C461 C462 C463 C464 C468 C469 C471 C472 C473 C474 C475 C476 C478 C481 C482 C484 C485 C486 C487 C488 C489 C490 C491 C492 C493 C496 C497 C498 C499 C500 C503 C505 C506 C507 Part No. 1-107-826-11 1-165-908-11 1-107-826-11 1-165-908-11 1-165-908-11 1-165-908-11 1-115-156-11 1-107-826-11 1-107-826-11 1-115-156-11 1-164-156-11 1-165-908-11 1-165-908-11 1-165-908-11 1-165-908-11 1-162-970-11 1-107-713-11 1-107-713-11 1-104-658-91 1-104-658-91 1-104-658-91 1-126-963-11 1-126-960-11 1-126-964-11 1-104-658-91 1-165-908-11 1-165-908-11 1-115-156-11 1-164-156-11 1-164-156-11 1-164-156-11 1-164-156-11 1-126-964-11 1-126-964-11 1-126-933-11 1-126-964-11 1-126-964-11 1-162-970-11 1-216-864-11 1-164-156-11 1-164-315-11 1-164-315-11 1-216-864-11 1-104-655-91 1-104-655-91 1-104-655-91 1-104-655-91 1-104-655-91 1-126-947-11 1-126-923-91 1-126-947-11 1-164-156-11 1-164-156-11 1-164-156-11 1-164-156-11 1-164-156-11 1-162-927-11 1-100-831-91 1-164-315-11 1-100-831-91 Description CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT ELECT ELECT ELECT ELECT ELECT ELECT ELECT ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT ELECT ELECT ELECT ELECT CERAMIC CHIP SHORT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP SHORT CHIP ELECT ELECT ELECT ELECT ELECT ELECT ELECT ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 1uF 0.1uF 1uF 1uF 1uF 1uF 0.1uF 0.1uF 1uF 0.1uF 1uF 1uF 1uF 1uF 0.01uF 4.7uF 4.7uF 100uF 100uF 100uF 4.7uF 1uF 10uF 100uF 1uF 1uF 1uF 0.1uF 0.1uF 0.1uF 0.1uF 10uF 10uF 100uF 10uF 10uF 0.01uF 0 0.1uF 470PF 470PF 0 470uF 470uF 470uF 470uF 470uF 47uF 220uF 47uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 100PF 0.001uF 470PF 0.001uF 10% 10% 10% 10% 10% 10% 10% 10% Remarks 16V 10V 16V 10V 10V 10V 10V 16V 16V 10V 25V 10V 10V 10V 10V 25V 50V 50V 10V 10V 10V 50V 50V 50V 10V 10V 10V 10V 25V 25V 25V 25V 50V 50V 16V 50V 50V 25V 25V 5% 5% 20% 20% 20% 20% 20% 20% 20% 20% 50V 50V 6.3V 6.3V 6.3V 6.3V 6.3V 35V 10V 35V 25V 25V 25V 25V 25V 50V 50V 50V 50V Ref. No. C508 C510 C511 C515 C516 C517 C518 C519 C520 C528 C529 C530 C531 C532 C541 C542 C543 C544 C545 C547 C550 C551 C552 C602 C603 C604 C605 C606 C608 C609 C611 C613 C614 C615 C616 C617 C618 C619 C620 C621 C622 C623 C624 C625 C626 C627 C628 C629 C630 C631 C632 C633 C635 C636 C638 C639 C640 C641 C642 C643 Part No. 1-164-315-11 1-164-156-11 1-164-230-11 1-164-156-11 1-164-315-11 1-164-230-11 1-100-831-91 1-164-315-11 1-100-831-91 1-104-655-91 1-104-655-91 1-104-655-91 1-104-655-91 1-104-655-91 1-126-963-11 1-126-963-11 1-126-963-11 1-126-963-11 1-126-933-11 1-104-662-91 1-104-662-91 1-104-662-91 1-162-927-11 1-162-966-11 1-162-966-11 1-162-927-11 1-162-915-11 1-162-915-11 1-125-891-11 1-104-658-91 1-126-947-11 1-164-156-11 1-164-156-11 1-162-927-11 1-162-970-11 1-164-156-11 1-164-156-11 1-164-156-11 1-115-156-11 1-162-924-11 1-162-924-11 1-162-908-11 1-162-908-11 1-115-156-11 1-164-156-11 1-164-156-11 1-162-970-11 1-164-173-11 1-164-739-11 1-162-970-11 1-164-173-11 1-164-739-11 1-162-919-11 1-162-919-11 1-126-964-11 1-126-962-11 1-104-658-91 1-126-964-11 1-104-658-91 1-104-658-91 Description CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT ELECT ELECT ELECT ELECT ELECT ELECT ELECT ELECT ELECT ELECT ELECT ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT ELECT ELECT ELECT ELECT ELECT 470PF 0.1uF 220PF 0.1uF 470PF 220PF 0.001uF 470PF 0.001uF 470uF 470uF 470uF 470uF 470uF 4.7uF 4.7uF 4.7uF 4.7uF 100uF 22uF 22uF 22uF 100PF 0.0022uF 0.0022uF 100PF 10PF 10PF 0.47uF 100uF 47uF 0.1uF 0.1uF 100PF 0.01uF 0.1uF 0.1uF 0.1uF 1uF 56PF 56PF 3PF 3PF 1uF 0.1uF 0.1uF 0.01uF 0.0039uF 560PF 0.01uF 0.0039uF 560PF 22PF 22PF 10uF 3.3uF 100uF 10uF 100uF 100uF 5% 5% 5% 5% 2% 5% 2% 20% 20% 20% 20% 20% 20% 20% 20% 20% 20% 20% 20% 20% 5% 10% 10% 5% 0.5PF 0.5PF 10% 20% 20% Remarks 50V 25V 50V 25V 50V 50V 50V 50V 50V 6.3V 6.3V 6.3V 6.3V 6.3V 50V 50V 50V 50V 16V 25V 25V 25V 50V 50V 50V 50V 50V 50V 10V 10V 35V 25V 25V 50V 25V 25V 25V 25V 10V 50V
10% 10% 10% 10% 10% 20% 20% 20% 20% 20% 20% 20% 20% 20% 10% 10%
5% 10%
5%
5% 50V 0.25PF 50V 0.25PF 50V 10V 25V 25V 25V 50V 50V 25V 50V 50V 50V 50V 50V 50V 10V 50V 10V 10V
10% 10% 5% 10% 10% 5% 5% 5% 20% 20% 20% 20% 20% 20%
5% 2% 5% 2%
8-4
AV-114
Ref. No. C751 C752 C753 C754 Part No. Description 0.1uF 100PF 100PF 100PF 5% 5% 5% Remarks 25V (AEP, UK) 50V (AEP, UK) 50V (AEP, UK) 50V (AEP, UK) Ref. No. * D523 * D524 D526 D527 D528 D529 D530 D531 D801 Part No. 6-501-855-01 6-501-855-01 8-719-988-61 8-719-988-61 8-719-988-61 8-719-083-63 8-719-083-63 8-719-081-42 8-719-081-42 Description DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DAN217UT106 DAN217UT106 1SS355TE-17 1SS355TE-17 1SS355TE-17 UDZSTE-1713B UDZSTE-1713B UMZ6.8N-T106 UMZ6.8N-T106 Remarks 1-164-156-11 CERAMIC CHIP 1-162-927-11 CERAMIC CHIP 1-162-927-11 CERAMIC CHIP 1-162-927-11 CERAMIC CHIP
< CONNECTOR > CN103 CN105 CN106 * CN302 1-779-277-11 1-784-496-11 1-568-830-11 1-784-746-11 CONNECTOR, FFC (LIF (NON-ZIF)) 9P CONNECTOR, FFC/FPC 17P CONNECTOR SOCKET 11P CONNECTOR, FFC 24P < DIODE > D101 D102 D103 D104 D106 D108 D201 D301 D302 D303 D304 D401 D402 D409 D410 D413 D414 D415 D416 D418 D419 D420 D421 D422 D501 D502 D503 D504 D505 D506 D507 D508 D509 D510 D511 D512 D513 D514 D515 D516 D517 D518 D519 D520 D521 D522 8-719-988-61 8-719-988-61 8-719-988-61 8-719-053-18 8-719-988-61 8-719-941-09 8-719-988-61 8-719-083-83 8-719-069-60 8-719-988-61 8-719-988-61 8-719-083-61 8-719-978-33 8-719-081-42 8-719-081-42 8-719-081-42 8-719-081-42 8-719-081-42 8-719-081-42 8-719-988-61 8-719-988-61 8-719-941-09 6-501-486-01 6-501-486-01 8-719-069-54 8-719-069-54 6-501-486-01 8-719-081-42 8-719-081-42 8-719-081-42 8-719-081-42 6-501-486-01 8-719-081-42 6-501-486-01 8-719-081-42 6-501-486-01 8-719-081-42 8-719-081-42 8-719-081-42 8-719-081-42 8-719-081-42 8-719-081-42 8-719-081-42 8-719-081-42 8-719-081-42 DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE 1SS355TE-17 1SS355TE-17 1SS355TE-17 1SR154-400TE-25 1SS355TE-17 DAP202UT106 1SS355TE-17 UDZSTE-1715B UDZSTE-179.1B 1SS355TE-17 1SS355TE-17 UDZSTE-1711B UDZSTE-176.8B UMZ6.8N-T106 UMZ6.8N-T106 UMZ6.8N-T106 UMZ6.8N-T106 UMZ6.8N-T106 UMZ6.8N-T106 1SS355TE-17 1SS355TE-17 DAP202UT106 NNCD3.9F-T1B NNCD3.9F-T1B UDZSTE-175.1B UDZSTE-175.1B NNCD3.9F-T1B UMZ6.8N-T106 UMZ6.8N-T106 UMZ6.8N-T106 UMZ6.8N-T106 NNCD3.9F-T1B UMZ6.8N-T106 NNCD3.9F-T1B UMZ6.8N-T106 NNCD3.9F-T1B UMZ6.8N-T106 UMZ6.8N-T106 UMZ6.8N-T106 UMZ6.8N-T106 UMZ6.8N-T106 UMZ6.8N-T106 UMZ6.8N-T106 UMZ6.8N-T106 UMZ6.8N-T106
< FUSE > 0 IC150 0 IC317 1-576-863-21 FUSE 0.5A 32V 1-576-863-21 FUSE 0.5A 32V < IC > IC101 IC102 IC103 IC104 IC401 IC402 IC403 IC406 IC601 6-807-412-01 6-711-071-01 6-711-072-01 6-711-188-01 6-711-073-01 8-759-909-71 6-703-623-01 8-759-082-60 6-702-714-01 IC IC IC IC IC IC IC IC IC LC87F06J2A-F58W3-E BD4846G-TR BU4220G-TR TC7MB3257FK (EL) HA118326APFR-E BA4558F MM1503XNRE TC7S66FU MSP3417G-QG-B8V3
* * * *
< JACK > JA401 JA751 1-794-198-11 CONNECTOR, S TERMINAL 1-764-188-31 JACK (SMALL TYPE) (DIA. 3.5) (AEP, UK) < TERMINAL > KN101 KN102 1-537-771-21 TERMINAL BOARD, GROUND 1-537-771-21 TERMINAL BOARD, GROUND < COIL > L102 L201 L303 L304 L305 L501 L502 L601 L602 L604 L605 L606 L607 L608 L609 L751 L801 L802 L803 L851 L852 L853 L854 L855 L856 1-410-517-11 1-412-549-31 1-500-245-11 1-408-621-31 1-500-245-11 1-414-594-11 1-414-594-11 1-500-245-11 1-500-245-11 1-414-760-21 1-414-760-21 1-500-245-11 1-412-963-11 1-500-245-11 1-412-951-11 1-414-760-21 1-414-228-11 1-414-228-11 1-216-864-11 1-414-228-11 1-414-228-11 1-414-228-11 1-414-228-11 1-500-283-11 1-414-228-11 Note : 8-719-081-42 DIODE UMZ6.8N-T106 INDUCTOR 47uH INDUCTOR 1mH INDUCTOR, FERRITE BEAD INDUCTOR 330uH INDUCTOR, FERRITE BEAD INDUCTOR, FERRITE BEAD INDUCTOR, FERRITE BEAD INDUCTOR, FERRITE BEAD INDUCTOR, FERRITE BEAD INDUCTOR, FERRITE BEAD INDUCTOR, FERRITE BEAD INDUCTOR, FERRITE BEAD INDUCTOR 100uH INDUCTOR, FERRITE BEAD INDUCTOR 10uH INDUCTOR, FERRITE BEAD (AEP, UK) INDUCTOR, FERRITE BEAD INDUCTOR, FERRITE BEAD SHORT CHIP 0 INDUCTOR, FERRITE BEAD INDUCTOR, FERRITE BEAD INDUCTOR, FERRITE BEAD INDUCTOR, FERRITE BEAD INDUCTOR, FERRITE BEAD INDUCTOR, FERRITE BEAD
8-5
The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.
AV-114
Ref. No. L857 L858 L859 L860 L861 L862 Part No. 1-414-228-11 1-414-228-11 1-414-228-11 1-500-283-11 1-469-876-11 Description INDUCTOR, FERRITE BEAD INDUCTOR, FERRITE BEAD INDUCTOR, FERRITE BEAD INDUCTOR, FERRITE BEAD INDUCTOR, FERRITE BEAD Remarks Ref. No. Part No. Description < RESISTOR > R101 R102 R103 R104 R105 R106 R107 R109 R110 R111 R112 R113 R116 R117 R118 R123 R124 R125 R126 R127 R129 R130 R131 R132 R133 R134 R135 R137 R138 R139 R140 R141 R142 R143 R144 R145 R146 R147 R148 R149 R150 R151 R152 R153 R154 R155 R156 R157 R158 R159 R160 R161 R165 R167 R168 1-216-809-11 1-216-809-11 1-216-809-11 1-216-841-11 1-216-809-11 1-216-864-11 1-216-833-11 1-216-815-11 1-216-809-11 1-216-809-11 1-216-833-11 1-216-864-11 1-216-864-11 1-216-857-11 1-216-864-11 1-216-815-11 1-216-815-11 1-216-809-11 1-216-809-11 1-216-833-11 1-216-815-11 1-216-864-11 1-216-829-11 1-218-867-11 1-216-845-11 1-216-821-11 1-216-845-11 1-216-809-11 1-216-817-11 1-218-867-11 1-216-809-11 1-218-867-11 1-216-809-11 1-216-809-11 1-216-864-11 1-216-833-11 1-216-809-11 1-216-821-11 1-216-809-11 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 1-216-809-11 1-216-809-11 1-216-809-11 1-216-809-11 1-216-845-11 1-216-845-11 1-216-864-11 1-216-809-11 1-216-864-11 1-216-864-11 1-216-809-11 1-216-812-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP SHORT CHIP METAL CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP SHORT CHIP SHORT CHIP METAL CHIP METAL CHIP 100 100 100 47K 100 0 10K 330 100 100 10K 0 0 1M 0 330 330 100 100 10K 330 0 4.7K 6.8K 100K 1K 100K 100 470 6.8K 100 6.8K 100 100 0 10K 100 1K 100 0 0 0 0 100 100 100 100 100K 100K 0 100 0 0 100 180 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W Remarks
Q101 Q102 Q103 Q104 Q105 Q108 Q110 Q111 Q112 Q201 Q301 Q302 Q303 Q304 Q305 Q306 Q307 Q308 * Q309 Q310 Q311 Q401 Q402 Q403 Q404 Q406 Q407 Q408 Q410 Q411 Q413 * Q501 Q502 Q503 Q504 Q505 Q506 Q507 Q508 Q509 Q510 Q511 Q601 Q602 Q604 Q605 Q606 Q751 Q752
8-729-029-06 8-729-620-13 6-550-375-01 6-550-375-01 8-729-023-22 8-729-029-06 8-729-028-86 8-729-620-13 8-729-620-13 8-729-023-22 6-550-375-01 8-729-620-13 6-550-375-01 8-729-044-09 6-550-375-01 8-729-901-87 6-550-375-01 8-729-901-87 6-551-719-01 8-729-620-13 8-729-427-70 8-729-029-06 8-729-023-22 6-551-699-01 6-550-375-01 8-729-023-22 8-729-023-22 8-729-620-13 8-729-620-13 6-550-375-01 8-729-029-06 6-551-718-01 6-551-699-01 8-729-620-13 8-729-620-13 8-729-620-13 8-729-013-26 8-729-013-26 8-729-028-83 8-729-620-13 8-729-620-13 6-551-699-01 6-551-699-01 6-551-699-01 6-551-699-01
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
DTC124EUA-T106 2SC4154TP-1EF UMD2N-TR UMD2N-TR 2SD2114K DTC124EUA-T106 DTA143EUA-T106 (AEP, UK) 2SC4154TP-1EF 2SC4154TP-1EF 2SD2114K UMD2N-TR 2SC4154TP-1EF UMD2N-TR 2SD2153T100V UMD2N-TR 2SC2411K-CQ UMD2N-TR 2SC2411K-CQ 2SC5876T106QR 2SC4154TP-1EF XP4401 DTC124EUA-T106 2SD2114K ISA1602AM1TP-1EF UMD2N-TR 2SD2114K 2SD2114K 2SC4154TP-1EF 2SC4154TP-1EF UMD2N-TR DTC124EUA-T106 UMH1NTN ISA1602AM1TP-1EF 2SC4154TP-1EF 2SC4154TP-1EF 2SC4154TP-1EF HN1C03FU-TE85R HN1C03FU-TE85R DTA124EUA-T106 2SC4154TP-1EF 2SC4154TP-1EF ISA1602AM1TP-1EF ISA1602AM1TP-1EF ISA1602AM1TP-1EF ISA1602AM1TP-1EF ISA1602AM1TP-1EF 2SC4154TP-1EF ISA1602AM1TP-1EF (AEP, UK) 2SC4154TP-1EF (AEP, UK)
5% 5% 5% 5% 5%
5%
1/10W
1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W
5% 5% 5% 5%
5% 5% 5% 5% 5% 5%
5%
1/10W
5% 5%
1/10W 1/10W
8-6
AV-114
Ref. No. R169 R171 R172 R173 R174 R175 R176 R177 R178 R179 R180 R181 R182 R183 R184 R185 R186 R187 R188 R189 R193 R194 R195 R196 R197 R199 R200 R201 R202 R203 R204 R205 R207 R208 R209 R210 R214 R215 R216 R217 R218 R219 R220 R221 R222 R223 R224 R225 R228 R233 R251 R301 R302 R303 R304 R305 R306 R307 R308 R309 Part No. 1-216-833-11 1-216-809-11 1-216-809-11 1-216-845-11 1-216-845-11 1-216-815-11 1-216-821-11 1-216-809-11 1-216-809-11 1-216-809-11 1-216-809-11 1-216-809-11 1-216-809-11 1-216-809-11 1-216-809-11 1-216-809-11 1-216-809-11 1-216-809-11 1-216-815-11 1-216-817-11 1-216-845-11 1-216-845-11 1-216-845-11 1-216-809-11 1-216-864-11 1-216-809-11 1-216-815-11 1-216-864-11 1-216-864-11 1-216-864-11 1-216-809-11 1-216-809-11 1-216-817-11 1-216-864-11 1-216-827-11 1-218-845-11 1-216-827-11 1-216-819-11 1-218-844-11 1-216-821-11 1-216-295-91 1-216-827-11 1-216-825-11 1-216-809-11 1-216-864-11 1-216-809-11 1-216-809-11 1-216-835-11 1-216-864-11 1-216-845-11 1-216-295-91 1-216-295-91 1-216-295-91 1-216-295-91 1-216-809-11 1-216-803-11 1-216-803-11 1-216-295-91 1-216-295-91 1-216-823-11 Description METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP METAL CHIP SHORT CHIP SHORT CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP SHORT CHIP METAL CHIP 10K 100 100 100K 100K 330 1K 100 100 100 100 100 100 100 100 100 100 100 330 470 100K 100K 100K 100 0 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% Remarks 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W Ref. No. R310 R311 R312 R313 R314 R315 R316 R318 R401 R402 R403 R404 R407 R408 R413 R414 R415 R416 R417 R418 R419 R420 R421 R422 R425 R428 R430 R431 R432 R433 R435 R436 R437 R438 R439 R444 R445 R447 R448 R453 R454 R455 R458 R459 R461 R462 R463 R465 R468 R469 R470 R471 R472 R473 R474 R475 R476 R477 R478 R479 Part No. 1-216-829-11 1-216-820-11 1-216-833-11 1-216-848-11 1-216-837-11 1-218-895-11 1-218-879-11 1-216-864-11 1-216-295-91 1-216-818-11 1-216-818-11 1-216-295-91 1-216-295-91 1-216-817-11 1-216-817-11 1-216-817-11 1-216-817-11 1-216-817-11 1-216-817-11 1-216-817-11 1-216-817-11 1-216-860-11 1-216-860-11 1-216-833-11 1-216-845-11 1-216-864-11 1-216-857-11 1-216-857-11 1-216-857-11 1-216-857-11 1-216-857-11 1-216-809-11 1-216-809-11 1-216-295-91 1-216-860-11 1-208-755-11 1-208-755-11 1-208-755-11 1-216-295-91 1-218-869-11 1-218-871-11 1-216-805-11 1-216-817-11 1-208-755-11 1-216-819-11 1-218-871-11 1-218-869-11 1-216-817-11 1-208-754-11 1-216-306-11 1-208-755-11 1-216-295-91 1-208-754-11 1-216-306-11 1-208-754-11 1-216-306-11 1-208-754-11 1-216-306-11 1-208-754-11 1-216-817-11 Description METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP SHORT CHIP METAL CHIP METAL CHIP SHORT CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES-CHIP METAL CHIP SHORT CHIP METAL CHIP RES-CHIP METAL CHIP RES-CHIP METAL CHIP RES-CHIP METAL CHIP METAL CHIP 4.7K 820 10K 180K 22K 100K 22K 0 0 560 560 0 0 470 470 470 470 470 470 470 470 1.8M 1.8M 10K 100K 0 1M 1M 1M 1M 1M 100 100 0 1.8M 75 75 75 0 8.2K 10K 47 470 75 680 10K 8.2K 470 68 3.9 75 0 68 3.9 68 3.9 68 3.9 68 470 5% 5% 5% 5% 5% 0.5% 0.5% Remarks 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W
5% 5%
1/10W 1/10W
5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W
100 5% 330 5% 0 (AEP, UK) 0 0 100 5% 100 5% 470 5% 0 (AEP, UK) 3.3K 5% 820 3.3K 680 750 1K 0 3.3K 2.2K 100 0 100 100 15K 0 100K 0 0 0 0 100 33 33 0 0 1.5K 0.5% 5% 5% 0.5% 5%
1/10W 1/10W
5% 5% 5% 5% 5% 5% 5% 5% 0.5% 0.5% 0.5% 0.5% 0.5% 5% 5% 0.5% 5% 0.5% 0.5% 5% 0.5% 5% 0.5% 0.5% 5% 0.5% 5% 0.5% 5% 0.5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W
5% 5% 5%
5% 5% 5% 5%
5% 5% 5%
5%
1/10W
8-7
AV-114
Ref. No. R480 R482 R484 R485 R486 R487 R488 R490 R501 R502 R503 R504 R504 R505 R505 Part No. 1-216-306-11 1-216-809-11 1-216-821-11 1-216-837-11 1-216-821-11 1-216-837-11 1-216-817-11 1-216-809-11 1-208-755-11 1-208-755-11 Description RES-CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 3.9 100 1K 22K 1K 22K 470 100 75 75 75 68 0 (AUS) 75 3.9 5% 5% 5% 5% 5% 5% 5% 5% 0.5% 0.5% 0.5% 0.5% Remarks 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W (AEP, UK) 1/10W (AUS) 1/10W (AEP, UK) Ref. No. R551 R552 R553 R554 R555 R556 R557 R558 R559 R560 R561 R562 R563 R564 R565 R566 R568 R569 R571 R573 R574 R602 R603 R605 R606 R607 R609 R616 R619 R620 R621 R622 R623 R624 R625 R626 R627 R628 R630 R631 R632 R633 R634 R635 R636 R637 R638 R701 R703 R751 R752 Part No. Description 100 470 100 100K 100K 3.9K 3.9K 10K 0 15K 680 10K 0 15K 680 22K 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 0.5% Remarks 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1-216-809-11 METAL CHIP 1-216-817-11 1-216-809-11 1-216-845-11 1-216-845-11 1-216-828-11 1-216-828-11 1-216-833-11 1-216-864-11 1-216-835-11 1-216-819-11 1-216-833-11 1-216-864-11 1-216-835-11 1-216-819-11 1-216-837-11 1-216-834-11 1-216-821-11 1-208-755-11 1-500-283-11 1-216-864-11 1-216-821-11 1-216-864-11 1-216-833-11 1-216-833-11 1-216-821-11 1-216-864-11 1-216-864-11 1-216-833-11 1-216-864-11 1-216-809-11 1-216-809-11 1-216-821-11 1-216-827-11 1-216-827-11 1-216-821-11 1-216-827-11 1-216-827-11 1-216-815-11 1-216-829-11 1-216-801-11 1-216-809-11 1-216-825-11 1-400-330-21 1-400-330-21 1-400-330-21 1-216-809-11 1-216-849-11 1-216-864-11 1-216-821-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP
1-208-755-11 METAL CHIP 1-208-754-11 METAL CHIP 1-216-295-91 SHORT CHIP 1-208-755-11 METAL CHIP 1-216-306-11 RES-CHIP
0.5% 5%
R506 R507 R508 R509 R510 R511 R512 R513 R514 R515 R516 R517 R518 R519 R520 R521 R522 R523 R524 R525 R526 R527 R528 R529 R530 R531 R532 R534 R535 R536 R537 R538 R539 R540 R541 R542 R543 R544 R545 R546 R547 R548 R549 R550
1-216-864-11 1-216-829-11 1-216-841-11 1-216-838-11 1-216-861-11 1-216-849-11 1-216-845-11 1-216-845-11 1-208-755-11 1-216-043-91 1-216-822-11 1-216-823-11 1-216-797-11 1-216-842-11 1-216-813-11 1-208-754-11 1-216-306-11 1-208-754-11 1-216-306-11 1-208-754-11 1-216-306-11 1-216-295-91 1-208-755-11 1-216-845-11 1-208-755-11 1-216-295-91 1-208-755-11 1-216-828-11 1-216-828-11 1-216-817-11 1-216-809-11 1-216-817-11 1-216-809-11 1-216-845-11 1-216-845-11 1-216-809-11 1-216-809-11 1-216-809-11 1-216-809-11 1-216-845-11 1-216-845-11 1-216-845-11 1-216-845-11 1-216-817-11
SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES-CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES-CHIP METAL CHIP RES-CHIP METAL CHIP RES-CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
0 4.7K 47K 27K 2.2M 220K 100K 100K 75 560 1.2K 1.5K 10 56K 220 68 3.9 68 3.9 68 3.9 0 75 100K 75 0 75 3.9K 3.9K 470 100 470 100 100K 100K 100 100 100 100 100K 100K 100K 100K 470
1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W
METAL CHIP 12K METAL CHIP 1K METAL CHIP 75 INDUCTOR, FERRITE BEAD SHORT CHIP 0 METAL CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP SHORT CHIP METAL CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 1K 0 10K 10K 1K 0 0 10K 0 100 100 1K 3.3K 3.3K 1K 3.3K 3.3K 330 4.7K 22
5% 5% 5% 5%
5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W
0.5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W
METAL CHIP 100 5% METAL CHIP 2.2K 5% INDUCTOR, FERRITE BEAD (1608) INDUCTOR, FERRITE BEAD (1608) INDUCTOR, FERRITE BEAD (1608) METAL CHIP METAL CHIP SHORT CHIP METAL CHIP 100 220K 0 1K 4.7K 5% 5% 5% 5%
1/10W 1/10W 1/10W (AEP, UK) 1/10W (AEP, UK) 1/10W (AEP, UK) 1/10W (AEP, UK) 1/10W (AEP, UK) 1/10W (AEP, UK)
1-216-829-11 METAL CHIP 1-216-811-11 METAL CHIP 1-216-829-11 METAL CHIP 1-216-821-11 METAL CHIP 1-216-864-11 SHORT CHIP
5% 5% 5% 5%
8-8
AV-114
Ref. No. Part No. Description < TUNER > 0 U601 1-693-741-11 TUNER(TMFE2-407A) C202 < VIBRATOR > C203 * X101 1-813-965-31 VIBRATOR, CRYSTAL (15MHz) X102 1-579-463-11 VIBRATOR, CRYSTAL (32.768kHz) * X601 1-813-713-21 VIBRATOR, CRYSTAL (18.432MHz) ************************************************************ DT-120 (AG) BOARD (not supplied) (AEP1,AEP3,UK) (Ref.No.;40000 series) DT-120 (BG) BOARD (not supplied) (AEP2) DT-120 (AS) BOARD (not supplied) (AUS) (Ref.No.;40000 series) ************************************** < CAPACITOR > C101 C102 C103 C104 C105 C106 C107 C108 C109 C110 C111 C112 C113 C114 C115 C116 C117 C118 C119 C120 C121 C124 C125 C126 C127 C128 C129 C130 C131 C134 C135 C136 C137 C138 C140 C142 C144 C147 C148 C149 C154 C155 C191 C192 C193 1-114-130-11 1-107-820-11 1-164-937-11 1-107-820-11 1-164-937-11 1-107-820-11 1-114-130-11 1-107-820-11 1-107-820-11 1-164-156-11 1-114-130-11 1-107-820-11 1-114-130-11 1-107-820-11 1-126-204-11 1-107-820-11 1-114-130-11 1-107-820-11 1-114-130-11 1-107-820-11 1-114-130-11 1-107-820-11 1-107-820-11 1-114-130-11 1-107-820-11 1-107-820-11 1-114-130-11 1-107-820-11 1-107-820-11 1-107-820-11 1-107-820-11 1-114-130-11 1-114-130-11 1-107-820-11 1-107-820-11 1-107-820-11 1-117-681-11 1-126-204-11 1-164-842-11 1-164-842-11 1-107-820-11 1-107-820-11 1-114-130-11 1-107-820-11 1-114-130-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 1uF 0.1uF 0.001uF 0.1uF 0.001uF 0.1uF 1uF 0.1uF 0.1uF 0.1uF 1uF 0.1uF 1uF 0.1uF 47uF 0.1uF 1uF 0.1uF 1uF 0.1uF 1uF 0.1uF 0.1uF 1uF 0.1uF 0.1uF 1uF 0.1uF 0.1uF 0.1uF 0.1uF 1uF 1uF 0.1uF 0.1uF 0.1uF 100uF 47uF 2PF 2PF 0.1uF 0.1uF 1uF 0.1uF 1uF 6.3V 16V 50V 16V 50V 16V 6.3V 16V 16V 25V 6.3V 16V 6.3V 16V 16V 16V 6.3V 16V 6.3V 16V 6.3V 16V 16V 6.3V 16V 16V 6.3V 16V 16V 16V 16V 6.3V 6.3V 16V 16V 16V 20% 16V 20% 16V 0.25PF 50V 0.25PF 50V 16V 16V 6.3V 16V 6.3V C204 1-107-820-11 CERAMIC CHIP 1-107-820-11 CERAMIC CHIP 0.1uF 0.1uF 1-107-820-11 CERAMIC CHIP 0.1uF Remarks Ref. No. C194 C201 Part No. Description 1uF 0.1uF 1-114-130-11 CERAMIC CHIP 1-107-820-11 CERAMIC CHIP
DT-120
Remarks 6.3V 16V (AEP2) 16V (AEP2) 16V (AEP2) 16V (AEP2) 16V (AEP2) 16V (AEP2) 16V (AEP2) 16V (AEP2) 16V (AEP2) 20% 20% 16V (AEP2) 16V 16V 16V 16V (AEP2) 6.3V (AEP2) 10V 16V 50V 10V 50V 16V 10V 6.3V 6.3V (AEP2) 6.3V 16V (AEP2) 16V 6.3V 6.3V 50V 16V (AEP2) 10V 6.3V (AEP2) 16V (AEP2) 10V (AEP2) 16V 10V 10V 16V 16V 16V 10V 50V
1-107-820-11 CERAMIC CHIP 1-107-820-11 CERAMIC CHIP 1-107-820-11 CERAMIC CHIP 1-107-820-11 CERAMIC CHIP 1-107-820-11 CERAMIC CHIP
1-126-204-11 ELECT CHIP 1-126-204-11 1-107-820-11 1-107-820-11 1-126-204-11 ELECT CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP
10% 10%
20%
C222 C301 C302 C303 C304 C306 C307 C309 C313 C314
1-114-130-11 CERAMIC CHIP 1-165-908-11 1-117-681-11 1-162-927-11 1-165-908-11 1-164-937-11 1-117-681-11 1-165-908-11 1-127-760-11 1-127-760-11 CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
1uF 1uF 100uF 100PF 1uF 0.001uF 100uF 1uF 4.7uF 4.7uF 10% 20% 5% 10% 10% 20% 10% 10% 10%
20%
C315 C318 C319 C320 C324 C326 C329 C332 C334 C335
1-127-760-11 CERAMIC CHIP 1-117-681-11 ELECT CHIP 1-117-681-11 ELECT CHIP 1-127-760-11 CERAMIC CHIP 1-124-778-00 ELECT CHIP 1-164-315-11 CERAMIC CHIP 1-126-204-11 ELECT CHIP 1-125-889-91 CERAMIC CHIP 1-127-760-11 CERAMIC CHIP 1-126-204-11 ELECT CHIP
4.7uF 100uF 100uF 4.7uF 22uF 470PF 47uF 2.2uF 4.7uF 47uF
1-165-908-11 CERAMIC CHIP 1-126-204-11 1-165-908-11 1-165-908-11 1-126-204-11 1-126-204-11 1-124-779-00 1-165-908-11 1-162-919-11 Note : ELECT CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP ELECT CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP
8-9
The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.
DT-120
Ref. No. C358 C359 C361 C364 C366 C367 C368 C369 C370 C372 C373 C375 C378 C379 C380 C381 C382 C383 C384 C385 C388 C389 C391 C392 C393 C394 C395 C396 C397 C398 C399 C400 C401 C402 C404 C406 C408 C409 C412 C413 C414 C415 C416 C417 C418 C421 C422 C423 C431 C433 C522 C524 C590 C591 C592 C593 C594 C595 C596 C597 Part No. Description 0.1uF 0.1uF 22PF 0.1uF 47uF 10uF 47uF 0.001uF 100PF 0.1uF 2.2uF 0.01uF 10uF 0.1uF 0.1uF 47uF 47uF 0.1uF 0.1uF 47uF 1uF 47uF 0.01uF 2.2uF 2.2uF 0.1uF 47uF 0.22uF 10PF 0.1uF 0.1uF 0.22uF 470PF 10PF 2.2uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 2.2uF 4.7uF 0.1uF 0.1uF 10PF 10PF 10PF 0.1uF 0.1uF 220uF 0.1uF 220uF 10% 10% Remarks 25V 25V 50V 25V 16V 50V 16V 50V 50V 25V 10V 25V 16V 25V 25V 16V 16V 25V 16V 16V 10V 16V 25V 10V 10V 25V 16V 16V 50V 25V 25V 16V 50V 50V 10V 25V 25V 16V 25V 16V 25V 25V 25V 25V 25V 25V 25V 25V (AEP2) 10V 6.3V 16V 16V 50V 50V 50V 25V 25V 4V 25V 4V Ref. No. C598 C599 C600 C601 C602 C603 C614 C615 C616 C618 C620 C621 C623 C626 C628 C629 C630 C633 C634 C636 C637 C638 C639 C640 C1001 C1002 C1003 C1004 C1005 C1006 C1007 C1008 C1009 C1010 C1011 C1012 C1013 C1014 C1015 C1016 C1017 C1018 C1019 C1020 C1021 C1022 C1023 C1024 C1025 C1026 C1027 C1028 C1029 C1030 C1031 C1032 C1033 C1034 C1035 C1036 C1037 Part No. Description 0.1uF 100uF 0.1uF 100uF 4.7uF 22uF 0.1uF 0.1uF 2.2uF 10uF 10uF 0.022uF 1uF 1uF 1uF 2.2uF 0.001uF 2.2uF 1uF 1uF 1uF 0.001uF 0.001uF 1uF 1uF 1uF 1uF 1uF 22PF 22PF 22PF 22PF 7PF 7PF 7PF 7PF 82PF 82PF 82PF 82PF 7PF 7PF 7PF 7PF 15PF 15PF 15PF 15PF 1uF 1uF 1uF 1uF 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 220uF 0.1uF 0.1uF 0.1uF 20% 20% 10% 20% Remarks 25V 16V 25V 16V 6.3V 6.3V 16V 16V 10V 10V 10V 50V 6.3V 6.3V 6.3V 10V 50V 10V 6.3V 6.3V 6.3V 50V 50V 6.3V 6.3V 6.3V 6.3V 6.3V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 6.3V 6.3V 6.3V 6.3V 25V 25V 25V 25V 25V 4V 16V 16V 16V 1-164-156-11 CERAMIC CHIP 1-164-156-11 1-162-919-11 1-164-156-11 1-126-204-11 1-126-197-11 1-126-204-11 1-162-964-11 1-162-927-11 1-164-156-11 1-125-889-11 1-162-970-11 1-124-779-00 1-164-156-11 1-164-156-11 1-126-204-11 1-126-204-11 1-164-156-11 1-107-826-11 1-126-204-11 1-165-908-11 1-126-204-11 1-162-970-11 1-125-889-11 1-125-889-11 1-164-156-11 1-126-204-11 1-127-715-91 1-162-915-11 1-164-156-11 1-164-156-11 1-127-715-91 1-164-315-11 1-162-915-11 1-125-889-11 1-164-156-11 1-164-156-11 1-107-826-11 1-164-156-11 1-107-826-11 1-164-156-11 1-164-156-11 1-164-156-11 1-164-156-11 1-164-156-11 1-164-156-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP ELECT CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 1-164-156-11 CERAMIC CHIP 1-117-681-11 1-164-156-11 1-117-681-11 1-127-760-11 1-124-778-00 1-107-820-11 1-107-820-11 1-125-889-11 1-100-966-91 1-100-966-91 1-163-037-11 1-114-130-11 1-114-130-11 1-114-130-11 1-125-889-11 1-164-937-11 1-125-889-11 1-114-130-11 1-114-130-11 1-114-130-11 1-164-937-11 1-164-937-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-164-858-11 1-164-858-11 1-164-858-11 1-164-858-11 1-162-912-11 1-162-912-11 1-162-912-11 1-162-912-11 1-164-872-11 1-164-872-11 1-164-872-11 1-164-872-11 1-162-912-11 1-162-912-11 1-162-912-11 1-162-912-11 1-164-854-11 1-164-854-11 1-164-854-11 1-164-854-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11 1-126-210-21 1-107-820-11 1-107-820-11 1-107-820-11 ELECT CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
10% 10%
10% 10%
1-164-156-11 CERAMIC CHIP 1-164-156-11 CERAMIC CHIP 1-125-889-91 CERAMIC CHIP 1-127-760-11 CERAMIC CHIP 1-107-820-11 CERAMIC CHIP 1-107-820-11 1-164-850-11 1-164-850-11 1-164-850-11 1-164-156-11 1-164-156-11 1-126-210-21 1-164-156-11 1-126-210-21 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP ELECT CHIP
20% 20%
8-10
DT-120
Ref. No. C1038 C1039 C1040 C1041 C1042 C1043 C1044 C1045 C1046 C1047 C1048 C1049 C1050 C1051 C1052 C1053 C1054 C1055 C1056 C1057 C1058 C1059 C1060 C1061 C1062 C1063 C1064 C1065 C1066 C1067 C1068 C1069 C1070 C1071 C1072 C1073 C1074 C1075 C1076 C1077 C1078 C1079 C1080 C1081 C1082 C1083 C1084 C1085 C1086 C1087 C1088 C1089 C1090 C1091 C1092 C1093 C1094 C1095 C1096 C1097 Part No. 1-107-820-11 1-107-820-11 1-114-130-11 1-164-937-11 1-126-210-21 1-107-820-11 1-107-820-11 1-107-820-11 1-107-820-11 1-107-820-11 1-107-820-11 1-107-820-11 1-107-820-11 1-107-820-11 1-107-820-11 1-107-820-11 1-107-820-11 1-107-820-11 1-107-820-11 1-114-130-11 1-114-130-11 1-124-779-00 1-164-937-11 1-114-130-11 1-114-130-11 1-107-820-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-164-937-11 1-114-130-11 1-164-937-11 1-126-210-21 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-107-820-11 1-114-130-11 1-114-130-11 1-126-210-21 1-114-130-11 1-114-130-11 1-162-912-11 1-162-912-11 1-114-130-11 1-114-130-11 Description CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.1uF 1uF 0.001uF 220uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 1uF 1uF 10uF 0.001uF 1uF 1uF 0.1uF 1uF 1uF 1uF 1uF 1uF 1uF 1uF 1uF 1uF 1uF 1uF 1uF 1uF 1uF 1uF 0.001uF 1uF 0.001uF 220uF 1uF 1uF 1uF 1uF 1uF 0.1uF 1uF 1uF 220uF 1uF 1uF 7PF 7PF 1uF 1uF Remarks 16V 16V 6.3V 50V 4V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 6.3V 6.3V 16V 50V 6.3V 6.3V 16V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 50V 6.3V 50V 4V 6.3V 6.3V 6.3V 6.3V 6.3V 16V 6.3V 6.3V 4V 6.3V 6.3V 50V 50V 6.3V 6.3V Ref. No. C1098 C1099 C1100 C1101 C1103 C1104 C1105 C1106 C1107 C1108 C1109 C1110 C1111 C1112 C1113 C1114 C1115 C1116 C1117 C1118 C1119 C1120 C1121 C1122 Part No. 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-107-820-11 1-107-820-11 1-107-820-11 1-100-966-91 1-164-937-11 1-164-937-11 1-164-937-11 1-107-820-11 1-107-820-11 1-164-937-11 1-164-943-81 1-114-130-11 1-164-937-11 1-164-937-11 1-164-937-11 1-164-937-11 1-126-210-21 1-107-820-11 1-107-820-11 1-117-681-11 Description CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP < CONNECTOR > CN102 * CN103 * CN202 CN203 1-779-338-51 1-569-940-11 1-564-728-11 1-564-704-41 CONNECTOR, FFC/FPC 28P SOCKET, CONNECTOR 24P PIN, CONNECTOR (SMALL TYPE) 12P PIN, CONNECTOR (SMALL TYPE) 2P < DIODE > * D302 D303 D304 6-501-864-01 DIODE SM15T6V8A 8-719-988-61 DIODE 1SS355TE-17 8-719-988-61 DIODE 1SS355TE-17 < FERRITE BEAD > F101 F102 F103 F104 F105 F106 F108 F202 F203 F204 F205 F206 F300 F301 F302 F305 F306 F309 F310 F311 1-543-949-22 1-543-949-22 1-543-949-22 1-543-949-22 1-543-949-22 1-543-949-22 1-543-949-22 1-543-949-22 1-543-949-22 1-543-949-22 1-543-949-22 1-543-949-22 1-543-949-22 1-543-949-22 1-543-949-22 1-543-949-22 1-543-949-22 1-543-949-22 1-543-949-22 1-543-949-22 BEAD, FERRITE (CHIP) (1608) BEAD, FERRITE (CHIP) (1608) BEAD, FERRITE (CHIP) (1608) BEAD, FERRITE (CHIP) (1608) BEAD, FERRITE (CHIP) (1608) BEAD, FERRITE (CHIP) (1608) BEAD, FERRITE (CHIP) (1608) BEAD, FERRITE (CHIP) (1608) BEAD, FERRITE (CHIP) (1608)(AEP2) BEAD, FERRITE (CHIP) (1608)(AEP2) BEAD, FERRITE (CHIP) (1608)(AEP2) BEAD, FERRITE (CHIP) (1608)(AEP2) BEAD, FERRITE (CHIP) (1608) BEAD, FERRITE (CHIP) (1608) BEAD, FERRITE (CHIP) (1608) BEAD, FERRITE (CHIP) (1608) BEAD, FERRITE (CHIP) (1608) BEAD, FERRITE (CHIP) (1608) BEAD, FERRITE (CHIP) (1608) BEAD, FERRITE (CHIP) (1608) 1uF 1uF 1uF 1uF 0.1uF 0.1uF 0.1uF 10uF 0.001uF 0.001uF 0.001uF 0.1uF 0.1uF 0.001uF 0.01uF 1uF 0.001uF 0.001uF 0.001uF 0.001uF 220uF 0.1uF 0.1uF 100uF Remarks 6.3V 6.3V 6.3V 6.3V 16V 16V 16V 10V 50V 50V 50V 16V 16V 50V 16V 6.3V 50V 50V 50V 50V 4V 16V 16V 16V
10% 20%
10% 10%
20% 10%
20%
20%
0.5PF 0.5PF
8-11
DT-120
Ref. No. F312 F313 F314 F316 F317 F318 F321 F397 F398 Part No. 1-543-949-22 1-543-949-22 1-543-949-22 1-543-949-22 1-543-949-22 1-543-949-22 1-543-949-22 1-543-949-22 1-543-949-22 Description BEAD, FERRITE (CHIP) (1608) BEAD, FERRITE (CHIP) (1608) BEAD, FERRITE (CHIP) (1608) BEAD, FERRITE (CHIP) (1608) BEAD, FERRITE (CHIP) (1608) BEAD, FERRITE (CHIP) (1608) BEAD, FERRITE (CHIP) (1608) BEAD, FERRITE (CHIP) (1608) BEAD, FERRITE (CHIP) (1608) < IC > IC101 * IC104 IC106 IC110 * IC201 IC202 * IC203 * IC204 IC208 IC302 * * * * * IC304 IC307 IC309 IC311 IC312 6-705-306-01 6-711-077-01 6-711-206-01 6-706-484-01 6-711-207-01 6-710-050-01 6-711-290-01 6-711-290-01 6-707-361-01 6-702-362-01 6-711-026-01 6-711-027-01 6-711-146-01 6-708-075-01 6-711-026-01 6-711-223-01 8-759-693-13 6-708-708-01 6-711-285-01 IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC HYB25DC256160CE-6 KA5SDKAS01TSN uPD61111GM-200-UEV-A TC7SH04FU (T5RSOYJF) CIMAX-SP2L (AEP2) TC74LCX245FK (EL) (AEP2) TC74LCX373FK (EL, K) (AEP2) TC74LCX373FK (EL, K) (AEP2) ST890BDR (AEP2) MM1563DFBE MM1685ANRE MM1689FHBE FPF2007 uPC3221GV MM1685ANRE DRX3975D NJM12904V (TE2) MM1561FFBE uPD64015AGM-UEU-A R109 R110 R111 R114 R116 R121 R122 R123 R124 R125 R126 R127 R128 R138 R139 R141 R142 R143 R144 R145 R146 R147 R148 R149 R151 R153 R154 R155 R159 R160 R166 R167 R168 R169 R170 R172 R173 R174 R179 R182 R183 R185 R186 R187 R188 R189 R190 R191 R192 R193 1-218-990-81 1-218-938-11 1-218-938-11 1-218-935-11 1-218-965-11 1-218-823-11 1-218-823-11 1-218-823-11 1-218-823-11 1-218-823-11 1-218-823-11 1-218-823-11 1-218-823-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-973-11 1-218-973-11 1-218-973-11 1-218-973-11 1-218-973-11 1-218-941-81 1-218-941-81 1-218-846-11 1-218-846-11 1-218-831-11 1-218-827-11 1-218-935-11 1-218-965-11 1-218-990-81 1-218-941-81 1-218-965-11 1-218-990-81 1-218-990-81 1-234-714-11 1-234-714-11 1-234-791-21 1-234-372-11 1-234-372-11 1-234-372-11 1-234-372-11 1-234-372-11 1-234-714-11 SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES-CHIP RES-CHIP SHORT CHIP RES-CHIP RES-CHIP SHORT CHIP 0 56 56 33 10K 100 100 100 100 100 100 100 100 10K 10K 10K 10K 10K 10K 10K 10K 10K 10K 47K 47K 47K 47K 47K 100 100 910 910 220 150 33 10K 0 100 10K 0 5% 5% 5% 5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 0.5% 0.5% 0.5% 0.5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/10W 1/10W 1/10W 1/10W 1/16W 1/16W 1/16W 1/16W Remarks Ref. No. Q1006 Q1007 Q1008 Part No. Description 2SC4081-R 2SC4081-R 2SC4081-R Remarks 8-729-905-35 TRANSISTOR 8-729-905-35 TRANSISTOR 8-729-905-35 TRANSISTOR < RESISTOR > R100 R101 R104 R105 R107 1-218-990-81 1-218-965-11 1-218-965-11 1-218-935-11 1-216-864-11 SHORT CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP 0 10K 10K 33 0
5% 5% 5%
< COIL > L304 L314 L315 L1001 L1002 L1003 L1004 L1005 L1006 L1007 L1008 1-412-938-61 1-469-110-21 1-400-703-21 1-412-951-11 1-412-951-11 1-412-951-11 1-412-951-11 1-412-954-11 1-412-954-11 1-412-954-11 INDUCTOR 0.82uH FERRITE, EMI (SMD) (1608) (3216, EMI FERRITE (SMD) INDUCTOR 10uH INDUCTOR 10uH INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR 10uH 10uH 18uH 18uH 18uH 18uH
Q201 Q202 Q203 Q305 Q306 Q307 Q308 Q309 Q310 Q312 Q1001 Q1002 Q1003 Q1004 Q1005
8-729-029-06 8-729-028-86 8-729-905-35 8-729-120-28 8-729-026-53 8-729-905-35 8-729-905-35 8-729-029-09 8-729-029-09 8-729-029-06 8-729-026-53 8-729-026-53 8-729-026-53 8-729-026-53 8-729-905-35
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
DTC124EUA-T106 (AEP2) DTA143EUA-T106 (AEP2) 2SC4081-R(AEP2) 2SC1623-L5L6 2SA1576A-T106-QR 2SC4081-R 2SC4081-R DTC143EUA-T106 DTC143EUA-T106 DTC124EUA-T106 2SA1576A-T106-QR 2SA1576A-T106-QR 2SA1576A-T106-QR 2SA1576A-T106-QR 2SC4081-R
SHORT CHIP 0 RES, NETWORK 56 (1005X4) RES, NETWORK 56 (1005X4) RES, NETWORK 150X4 (2010) RES, NETWORK 100 (1005X4) RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK 100 (1005X4) 100 (1005X4) 100 (1005X4) 100 (1005X4) 56 (1005X4)
8-12
DT-120
Ref. No. R194 R197 R199 R201 R202 R203 R204 R205 R206 R207 R208 R209 R210 R211 R213 Part No. 1-234-714-11 1-218-990-81 1-218-990-81 1-234-371-21 1-234-371-21 1-234-371-21 1-234-371-21 1-234-371-21 1-234-371-21 1-234-371-21 1-234-371-21 1-234-371-21 1-218-990-81 1-218-965-11 Description RES, NETWORK SHORT CHIP SHORT CHIP RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK SHORT CHIP RES-CHIP 56 (1005X4) 0 0 47 (1005X4) (AEP2) 47 (1005X4) (AEP2) 47 (1005X4) (AEP2) 47 (1005X4) (AEP2) 47 (1005X4) (AEP2) 47 (1005X4) (AEP2) 47 (1005X4) (AEP2) 47 (1005X4) (AEP2) 47 (1005X4) (AEP2) 0 (AEP2) 10K 5% 1/16W (AEP2) 47 5% 1/16W (AEP2) 100 100 0 (AEP2) 0 (AEP2) 10K 5% 5% 1/16W (AEP2) 1/16W (AEP2) Remarks Ref. No. R256 R257 R269 R270 R271 Part No. Description 47 47 5.6K 10K 22K 5% 5% 5% 5% 5% Remarks 1/16W (AEP2) 1/16W (AEP2) 1/16W (AEP2) 1/16W (AEP2) 1/16W (AEP2) 1-218-937-11 RES-CHIP 1-218-937-11 RES-CHIP 1-218-962-11 RES-CHIP 1-218-965-11 RES-CHIP 1-218-969-11 RES-CHIP
R272 R273 R277 R278 R279 R280 R281 R300 R303 R304 R305 R306 R308 R309 R310 R311 R312 R313 R314 R315 R316 R317 R318 R319 R320 R321 R322 R323 R325 R326 R327 R331 R333 R336 R337 R341 R342 R343 R344 R345 R346 R347 R348 R349 R350
1-218-965-11 RES-CHIP 1-218-965-11 RES-CHIP 1-218-937-11 RES-CHIP 1-234-372-11 RES, NETWORK 1-234-372-11 RES, NETWORK 1-234-372-11 RES, NETWORK 1-218-965-11 RES-CHIP 1-216-864-11 SHORT CHIP 1-216-864-11 SHORT CHIP 1-216-833-11 METAL CHIP 1-216-864-11 1-216-864-11 1-218-867-11 1-216-825-11 1-216-825-11 1-216-819-11 1-216-809-11 1-218-961-11 1-218-961-11 1-218-965-11 1-216-829-11 1-218-867-11 1-216-825-11 1-218-973-11 1-216-825-11 1-218-961-11 1-216-839-11 1-216-864-11 1-216-833-11 1-218-961-11 1-218-867-11 1-216-823-11 1-216-809-11 1-216-864-11 1-216-864-11 1-218-960-11 1-218-960-11 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 SHORT CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES-CHIP RES-CHIP RES-CHIP METAL CHIP METAL CHIP METAL CHIP RES-CHIP METAL CHIP RES-CHIP METAL CHIP SHORT CHIP METAL CHIP RES-CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP
10K
1-218-937-11 RES-CHIP
1/16W (AEP2) 10K 5% 1/16W (AEP2) 47 5% 1/16W (AEP2) 100 (1005X4) (AEP2) 100 (1005X4) (AEP2) 100 (1005X4) (AEP2) 10K 5% 1/16W (AEP2) 0 0 10K 5% 1/10W 0 0 6.8K 2.2K 2.2K 680 100 4.7K 4.7K 10K 4.7K 6.8K 2.2K 47K 2.2K 4.7K 33K 0 10K 4.7K 6.8K 1.5K 100 0 0 3.9K 3.9K 0 0 0 0 0 0 0 0
5%
1-218-941-81 RES-CHIP 1-218-941-81 RES-CHIP 1-218-990-81 SHORT CHIP 1-216-864-11 SHORT CHIP 1-218-965-11 RES-CHIP
5%
R221 R222 R223 R224 R225 R226 R227 R228 R229 R230 R231 R233 R234 R236 R239 R240 R241 R242 R243 R244 R245 R246 R247 R248 R249 R250 R251 R252 R253 R254
1-218-937-11 RES-CHIP 1-218-965-11 RES-CHIP 1-234-371-21 RES, NETWORK 1-234-371-21 RES, NETWORK 1-234-371-21 RES, NETWORK 1-234-371-21 1-234-371-21 1-234-371-21 1-218-965-11 RES, NETWORK RES, NETWORK RES, NETWORK RES-CHIP
47 10K
5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W 1/16W 1/16W 1/16W 1/10W 1/10W 1/10W 1/16W 1/10W 1/16W 1/10W 1/10W 1/16W 1/10W 1/10W 1/10W
47 (1005X4) (AEP2) 47 (1005X4) (AEP2) 47 (1005X4) (AEP2) 47 (1005X4) (AEP2) 47 (1005X4) (AEP2) 47 (1005X4) (AEP2) 10K 5% 1/16W (AEP2) 10K 5% 1/16W 820 47 47 5% 5% 5% 1/16W (AEP2) 1/16W (AEP2) 1/16W (AEP2)
1-218-965-11 RES-CHIP 1-218-952-11 RES-CHIP 1-218-937-11 RES-CHIP 1-218-937-11 RES-CHIP 1-218-990-81 SHORT CHIP 1-234-371-21 RES, NETWORK 1-234-371-21 1-234-371-21 1-234-371-21 1-234-371-21 1-234-371-21 1-234-371-21 1-234-371-21 1-234-371-21 1-234-371-21 1-234-371-21 1-218-965-11 1-218-965-11 1-218-990-81 1-218-937-11 1-218-937-11 RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES-CHIP RES-CHIP SHORT CHIP RES-CHIP RES-CHIP
0 (AEP2) 47 (1005X4) 47 (1005X4) 47 (1005X4) 47 (1005X4) 47 (1005X4) 47 (1005X4) 47 (1005X4) 47 (1005X4) 47 (1005X4) 47 (1005X4) 47 (1005X4) 10K 10K 0 (AEP2) 47 47 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W
5% 5%
1/16W 1/16W
8-13
DT-120
Ref. No. R351 R352 R353 R354 R355 R356 R357 R358 R359 R361 R363 R527 R528 R529 R530 R531 R532 R534 R535 R538 R540 R542 R544 R546 R547 R550 R551 R554 R556 R558 R560 R561 R564 R566 R568 R569 R570 R571 R572 R575 R576 R577 R579 R580 R589 R594 R595 R597 R598 R605 R606 R607 R608 R609 R610 R616 R621 R622 R623 R624 Part No. 1-218-965-11 1-218-965-11 1-218-969-11 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 1-218-969-11 1-218-965-11 1-216-864-11 1-218-965-11 1-218-990-81 1-218-990-81 1-218-990-81 1-218-990-81 1-218-990-81 1-218-990-81 1-218-990-81 1-218-969-11 1-218-969-11 1-218-969-11 1-218-969-11 1-218-969-11 1-218-969-11 1-218-969-11 1-218-969-11 1-218-969-11 1-218-969-11 1-218-969-11 1-218-969-11 1-218-969-11 1-218-969-11 1-218-969-11 1-218-969-11 1-218-969-11 1-218-941-81 1-218-941-81 1-218-990-81 1-218-990-81 1-218-965-11 1-218-965-11 1-218-990-81 1-218-965-11 1-218-965-11 1-218-990-81 1-218-938-11 1-218-938-11 1-218-939-11 1-218-939-11 1-218-990-81 1-218-990-81 1-218-990-81 1-218-937-11 1-218-937-11 1-218-937-11 1-218-937-11 1-218-969-11 1-218-969-11 1-218-990-81 1-234-400-21 Description RES-CHIP RES-CHIP RES-CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP SHORT CHIP RES-CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP SHORT CHIP RES-CHIP RES-CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP 10K 10K 22K 0 0 0 0 22K 10K 0 (AEP2) 10K 0 0 0 0 0 0 0 22K 22K 22K 22K 22K 22K 22K 22K 22K 22K 22K 22K 22K 22K 22K 22K 22K 100 100 0 0 10K 10K 0 10K 10K 0 56 56 68 68 0 0 0 47 47 47 5% 5% 5% Remarks 1/16W 1/16W 1/16W Ref. No. R625 R626 R627 R628 R629 5% 5% 1/16W 1/16W Part No. Description Remarks 1-234-400-21 CONDUCTOR, NETWORK (1005X4) (AEP2) 1-234-400-21 CONDUCTOR, NETWORK (1005X4) (AEP2) 1-234-400-21 CONDUCTOR, NETWORK (1005X4) (AEP1,AEP3,UK,AUS) 1-234-400-21 CONDUCTOR, NETWORK (1005X4) (AEP1,AEP3,UK,AUS) 1-234-400-21 CONDUCTOR, NETWORK (1005X4) (AEP1,AEP3,UK,AUS) 1-234-400-21 1-218-990-81 1-218-990-81 1-216-864-11 1-216-295-91 1-216-864-11 1-218-847-11 1-218-847-11 1-216-864-11 1-216-864-11 1-216-864-11 1-216-857-11 1-216-820-11 1-216-864-11 1-216-864-11 CONDUCTOR, NETWORK (1005X4) SHORT CHIP 0 SHORT CHIP 0 SHORT CHIP 0 SHORT CHIP 0 SHORT CHIP METAL CHIP METAL CHIP SHORT CHIP SHORT CHIP SHORT CHIP METAL CHIP METAL CHIP SHORT CHIP SHORT CHIP 0 1K 1K 0 0 0 1M 820 0 0
5%
1/16W
R641 R642 R643 R644 R650 R651 R660 R661 R662 R666
0.5% 0.5%
1/10W 1/10W
5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W
R668 R671 R672 R673 R674 R678 R678 R679 R679 R680
5% 5%
1/10W 1/10W
1-234-372-11 RES, NETWORK 1-242-963-21 RES, NETWORK 1-234-372-11 RES, NETWORK 1-242-963-21 RES, NETWORK 1-216-809-11 METAL CHIP
100 (1005X4) (AEP1,AEP3,UK,AUS) 33 (1005X4) (AEP2) 100 (1005X4) (AEP1,AEP3,UK,AUS) 33 (1005X4) (AEP2) 100 5% 1/10W (AEP1,AEP3,UK,AUS) 33 100 33 100 33 1/10W (AEP2) 5% 1/10W (AEP1,AEP3,UK,AUS) 5% 1/10W (AEP2) 5% 1/10W (AEP1,AEP3,UK,AUS) 5% 1/10W (AEP2) 5%
1-216-803-11 METAL CHIP 1-216-809-11 METAL CHIP 1-216-803-11 METAL CHIP 1-216-809-11 METAL CHIP 1-216-803-11 METAL CHIP
5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W R683 R685 R686 R687 R688 R689 R690 R691 R692 R693 R694 R695 R696 R698 R699 R700 R701 R702 R703 1-216-864-11 1-216-833-11 1-216-833-11 1-216-811-11 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 1-242-963-21 1-242-963-21 1-242-963-21 1-218-935-11 1-218-935-11 1-218-935-11 1-218-935-11 1-218-935-11 1-216-295-91 SHORT CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP RES, NETWORK RES, NETWORK RES, NETWORK RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP 0 10K 10K 150 0 0 0 0 0 0 33 (1005X4) 33 (1005X4) 33 (1005X4) 33 5% 33 33 33 33 0 5% 5% 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W
5% 5% 5% 5%
5% 5% 5% 5% 5% 5%
(1005X4) (AEP2)
8-14
DT-120
Ref. No. R704 R705 R706 R707 R709 R714 R715 R719 R720 R721 R722 R723 R724 R725 R726 R728 R729 R733 R1001 R1002 R1003 R1004 R1017 R1018 R1019 R1020 R1021 R1022 R1023 R1024 R1025 R1026 R1027 R1028 R1029 R1030 R1031 R1032 R1033 R1034 R1035 R1036 R1037 R1038 R1039 R1040 R1042 R1043 R1044 R1045 R1046 R1047 R1048 R1049 R1050 R1051 R1052 R1053 R1054 R1055 Part No. 1-218-935-11 1-218-935-11 1-218-935-11 1-218-935-11 1-218-965-11 1-216-295-91 1-218-990-81 1-218-971-11 1-218-965-11 1-234-372-11 1-234-372-11 1-234-791-21 1-234-791-21 1-218-965-11 1-218-965-11 1-218-990-81 1-218-990-81 1-218-990-81 1-218-937-11 1-218-937-11 1-218-937-11 1-218-937-11 1-218-947-11 1-218-947-11 1-218-947-11 1-218-947-11 1-218-839-11 1-218-839-11 1-218-839-11 1-218-839-11 1-208-893-11 1-208-893-11 1-208-893-11 1-208-893-11 1-218-929-11 1-218-929-11 1-218-929-11 1-218-929-11 1-218-951-11 1-218-951-11 1-218-951-11 1-218-951-11 1-218-973-11 1-218-973-11 1-218-973-11 1-234-378-21 1-234-372-11 1-234-372-11 1-234-372-11 1-234-372-11 1-218-941-81 1-234-372-11 1-234-372-11 1-218-990-81 1-234-372-11 1-234-372-11 1-234-372-11 1-218-953-11 1-218-965-11 1-218-973-11 Description RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP RES, NETWORK 33 33 33 33 10K 5% 5% 5% 5% 5% Remarks 1/16W 1/16W 1/16W 1/16W 1/16W Ref. No. R1057 R1058 R1059 R1060 R1061 Part No. 1-216-864-11 1-218-965-11 1-218-965-11 1-218-961-11 1-218-961-11 Description SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 0 10K 10K 4.7K 4.7K
FL-178
Remarks 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W
< TRANSFORMER > 1/16W 1/16W * T300 1-445-211-11 TRANSFORMER, HIGH-FREQUENCY < TUNER > 0 U301 1-693-743-11 TUNER (TUPADTC-D101HB) < VIBRATOR > 1/16W 1/16W * X300 1-813-966-21 VIBRATOR, CRYSTAL (SMD, 20MHz) ************************************************************ FL-178 (BG) BOARD (not supplied) (AEP, UK) FL-178 (1640 HCA) BOARD (not supplied) (AUS) (Ref.No.;30000 series) ************************************** < CAPACITOR > C101 C102 C107 C111 1-115-156-11 1-115-156-11 1-107-726-91 1-125-972-61 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT < CONNECTOR > CN103 CN105 CN106 1-785-828-21 CONNECTOR, SQUARE TYPE 4P 1-817-693-11 CONNECTOR, USB (B) 1-815-381-11 CONNECTOR, FPC/FFC 5P < IC > IC101 6-600-392-01 IC GP1UM27XK0SF < COIL > L102 L103 L104 L105 1-400-180-21 1-400-180-21 1-400-180-21 1-400-180-21 INDUCTOR, EMI FERRITE (1608) INDUCTOR, EMI FERRITE (1608) INDUCTOR, EMI FERRITE (1608) INDUCTOR, EMI FERRITE (1608) < RESISTOR > R104 R105 R108 R109 R112 R113 1-216-803-11 1-216-803-11 1-216-803-11 1-216-803-11 1-216-864-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP 33 33 33 33 0 0 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1uF 1uF 0.01uF 100uF 10V 10V 16V 16V
RES, NETWORK 100 (1005X4) RES, NETWORK 150X4 (2010) RES, NETWORK 150X4 (2010) RES-CHIP 10K 5% RES-CHIP 10K 5% SHORT CHIP SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES-CHIP RES, NETWORK RES, NETWORK SHORT CHIP RES, NETWORK RES, NETWORK RES, NETWORK RES-CHIP RES-CHIP RES-CHIP 0 0 0 47 47 47 47 330 330 330 330 470 470 470 470 1.8K 1.8K 1.8K 1.8K 10 10 10 10 680 680 680 680 47K 47K 47K
1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/10W 1/10W 1/10W 1/10W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W
10% 20%
10K (1005X4) 100 (1005X4) 100 (1005X4) 100 (1005X4) 100 (1005X4) 100 5% 100 (1005X4) 100 (1005X4) 0 100 (1005X4) 100 (1005X4) 100 (1005X4) 1K 5% 10K 5% 47K 5% 1/16W
S101 S102
1-771-410-21 SWITCH, TACTILE (?/1(POWER)) 1-771-410-21 SWITCH, TACTILE (ONE TOUCH DUB) < VARISTOR >
Note :
8-15
The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.
FR-274
Ref. No. Part No. Description Remarks Ref. No. Part No. Description < TRANSISTOR > Q201 Q202 Q203 Q204 Q205 Q206 100uF 220PF 220PF 0.0027uF 0.1uF 100000PF 0.1uF 22uF 0.1uF 0.01uF 0.01uF 0.1uF 20% 5% 5% 5% 10% 25V 50V 50V 200V 16V 35V 50V 50V 50V 16V 16V 50V 8-729-052-91 8-729-052-91 8-729-904-87 8-729-421-19 8-729-029-06 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SD1898T100R 2SD1898T100R 2SB1197K-R UN2213 DTC124EUA-T106 DTC143TUA-T106 Remarks FR-274 (BG) BOARD (not supplied) (AEP, UK) FR-274 (1640 HCA) BOARD (not supplied) (AUS) (Ref.No.;30000 series) ************************************** * 2-319-520-01 SPACER, FL < CAPACITOR > C201 C204 C206 * C207 C211 C213 C215 C216 C217 C221 C222 C223 1-128-111-11 1-164-230-11 1-164-230-11 1-107-377-21 1-107-826-11 1-131-992-91 1-115-339-11 1-128-131-11 1-115-339-11 1-107-726-91 ELECT CERAMIC CHIP CERAMIC CHIP MYLAR CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP
R201 R205 R206 R207 R209 R213 R215 R217 R218 R220 R222 R223 R225 R227 R228 R229 R230 R231 R232 R233 R235 R236 R237 R238 R239 R240 R241 R242 R243 R244 R245 R246 R248 R250 R251 R252
1-216-295-91 1-216-864-11 1-216-864-11 1-216-864-11 1-216-833-11 1-216-864-11 1-216-830-11 1-216-833-11 1-216-849-11 1-216-849-11 1-216-295-91 1-216-826-11 1-216-814-11 1-216-838-11 1-216-833-11 1-216-825-11 1-216-825-11 1-216-825-11 1-216-864-11 1-216-845-11 1-216-864-11 1-216-833-11 1-216-833-11 1-216-833-11 1-216-825-11 1-216-825-11 1-216-827-11 1-216-830-11 1-216-833-11 1-216-825-11 1-216-825-11 1-216-827-11 1-216-827-11 1-216-805-11 1-216-805-11
SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP METAL CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
0 0 0 0 10K 0 5.6K 10K 220K 220K 0 2.7K 270 27K 10K 2.2K 2.2K 2.2K 0 100K 0 10K 10K 10K 2.2K 2.2K 3.3K 5.6K 10K 2.2K 2.2K 3.3K 3.3K 47 47 47
5%
1/10W
5% 5% 5% 5%
1-815-381-11 CONNECTOR, FPC/FFC 5P 1-563-614-31 HOUSING, CONNECTOR 11P 1-784-739-11 CONNECTOR, FFC 17P < DIODE >
5% 5% 5% 5% 5% 5% 5% 5%
D202 D203 D204 D205 D206 D207 D208 D209 D210 D211 * D212 D214 D216
8-719-067-40 8-719-067-40 8-719-067-40 8-719-067-40 8-719-067-40 8-719-067-40 8-719-988-61 8-719-988-61 8-719-988-61 8-719-988-61
DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE
STZ6.8N-T146 STZ6.8N-T146 STZ6.8N-T146 STZ6.8N-T146 STZ6.8N-T146 STZ6.8N-T146 1SS355TE-17 1SS355TE-17 1SS355TE-17 1SS355TE-17
5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W
6-501-884-01 DIODE SDPB31H3C0100 6-501-437-01 DIODE SLI-343YC3F 8-719-056-82 DIODE MM3Z6V2ST1 < FERRITE BEAD >
FB201 FB202
1-414-228-11 INDUCTOR, FERRITE BEAD 1-414-228-11 INDUCTOR, FERRITE BEAD < IC >
IC201
6-701-729-01 IC PT6315 < JACK > S201 S203 S204 S207 S208 S209 S210 S211 S212 S213 1-771-410-21 1-786-726-11 1-771-410-21 1-786-726-11 1-771-410-21 1-771-410-21 1-786-726-11 1-786-726-11 1-786-726-11 1-786-726-11
J201
SWITCH, TACTILE (Z (OPEN/CLOSE)) SWITCH, TACTILE (x (REC STOP)) SWITCH, TACTILE (INPUT SELECT) SWITCH, TACTILE (z (REC)) SWITCH, TACTILE (CHANNEL +) SWITCH, TACTILE (CHANNEL -) SWITCH, TACTILE (N (PLAY)) SWITCH, TACTILE (x (STOP)) SWITCH, TACTILE (DVD) SWITCH, TACTILE (HDD)
L201
1-411-919-11 INDUCTOR
100uH
< FLUORESCENT INDICATOR TUBE > ND201 1-519-964-11 INDICATOR TUBE, FLUORESCENT
8-16
FR-274
Ref. No. Part No. Description < TRANSFORMER > * T201 1-445-207-11 TRANSFORMER, DC-DC CONVERTER ************************************************************ RD-65 (BS) BOARD (not supplied) (AEP, UK) RD-65 (DS) EM BOARD (not supplied) (AUS) (Ref.No.;20000 series) ************************************** < CAPACITOR > C100 C101 C103 C104 C105 C106 C107 C113 C114 C115 C116 C117 C120 C121 C122 C124 C125 C127 C128 C129 C130 C131 C133 C134 C135 C136 C137 C140 C141 C142 C143 C144 C145 C146 C149 C152 C153 C154 C155 C156 C157 C158 C159 C162 C163 C164 C165 C166 C167 C169 1-164-937-11 1-164-937-11 1-126-210-21 1-114-130-11 1-164-937-11 1-107-820-11 1-164-936-11 1-100-581-81 1-100-581-81 1-164-943-81 1-125-777-11 1-164-937-11 1-125-777-11 1-164-939-11 1-164-939-11 1-125-777-11 1-114-130-11 1-119-923-11 1-125-777-11 1-114-130-11 1-127-760-11 1-137-987-81 1-125-777-11 1-125-777-11 1-164-943-81 1-125-777-11 1-164-942-11 1-100-415-91 1-100-415-91 1-100-966-91 1-100-966-91 1-164-943-81 1-164-943-81 1-100-966-91 1-164-943-81 1-164-937-11 1-124-779-00 1-114-130-11 1-100-415-91 1-165-448-81 1-164-943-81 1-164-943-81 1-107-820-11 1-114-130-11 1-126-210-21 1-164-937-11 1-164-858-11 1-164-858-11 1-107-820-11 1-125-777-11 CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.001uF 0.001uF 220uF 1uF 0.001uF 0.1uF 680PF 0.0047uF 0.0047uF 0.01uF 0.1uF 0.001uF 0.1uF 0.0022uF 0.0022uF 0.1uF 1uF 0.047uF 0.1uF 1uF 4.7uF 0.068uF 0.1uF 0.1uF 0.01uF 0.1uF 0.0068uF 0.47uF 0.47uF 10uF 10uF 0.01uF 0.01uF 10uF 0.01uF 0.001uF 10uF 1uF 0.47uF 0.0018uF 0.01uF 0.01uF 0.1uF 1uF 220uF 0.001uF 22PF 22PF 0.1uF 0.1uF 10% 10% 20% 10% 50V 50V 4V 6.3V 50V 16V 50V 50V 50V 16V 10V 50V 10V 50V 50V 10V 6.3V 10V 10V 6.3V 6.3V 10V 10V 10V 16V 10V 16V 6.3V 6.3V 10V 10V 16V 16V 10V 16V 50V 16V 6.3V 6.3V 50V 16V 16V 16V 6.3V 4V 50V 50V 50V 16V 10V Remarks Ref. No. C170 C171 C172 C173 C174 C176 C177 C180 C181 C182 C187 C188 C189 C194 C197 C199 C201 C202 C280 C281 C282 C283 C284 C285 C286 C287 C288 C289 C290 C291 C501 C503 C504 C505 C508 C509 C510 C511 C512 C513 C514 C515 C516 C532 C1001 C1002 C1003 C1004 C1005 C1006 C1007 C1008 C1009 C1010 C1011 C1012 C1013 C1014 C1015 C1016 Part No. 1-164-866-11 1-125-777-11 1-164-866-11 1-164-866-11 1-164-866-11 1-164-858-11 1-164-858-11 1-100-966-91 1-127-760-11 1-100-966-91 1-164-943-81 1-164-943-81 1-164-937-11 1-127-760-11 1-125-777-11 1-114-130-11 1-125-777-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-100-966-91 1-114-130-11 1-107-820-11 1-164-937-11 1-107-820-11 1-164-937-11 1-107-820-11 1-162-962-11 1-125-777-11 1-100-566-91 1-164-937-11 1-164-862-11 1-164-870-11 1-127-573-11 1-164-360-11 1-164-360-11 1-100-566-91 1-100-566-91 1-125-777-11 1-125-777-11 1-125-777-11 1-125-777-11 1-126-209-11 1-114-130-11 1-164-937-11 1-114-130-11 1-126-210-21 1-114-130-11 1-126-210-21 1-114-130-11 1-164-937-11 1-126-209-11 1-114-130-11 1-164-937-11 1-125-777-11 1-125-777-11 Description CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 47PF 0.1uF 47PF 47PF 47PF 22PF 22PF 10uF 4.7uF 10uF 0.01uF 0.01uF 0.001uF 4.7uF 0.1uF 1uF 0.1uF 1uF 1uF 1uF 1uF 1uF 1uF 1uF 10uF 1uF 0.1uF 0.001uF 0.1uF 0.001uF 0.1uF 470PF 0.1uF 0.1uF 0.001uF 33PF 68PF 1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 100uF 1uF 0.001uF 1uF 220uF 1uF 220uF 1uF 0.001uF 100uF 1uF 0.001uF 0.1uF 0.1uF 5% 10% 5% 5% 5% 5% 5% 20% 10% 20% 10% 10% 10% 10% 10%
RD-65
Remarks 50V 10V 50V 50V 50V 50V 50V 10V 6.3V 10V 16V 16V 50V 6.3V 10V 6.3V 10V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 10V 6.3V 16V 50V 16V 50V 16V 50V 10V 25V 50V 50V 50V 16V 16V 16V 25V 25V 10V 10V 10V 10V 4V 6.3V 50V 6.3V 4V 6.3V 4V 6.3V 50V 4V 6.3V 50V 10V 10V
10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10%
10%
20%
10% 10%
10% 10% 10% 10% 10% 10% 10% 10% 10% 20% 20% 10% 10% 20% 10% 10% 20% 10% 10% 10% 10%
8-17
RD-65
Ref. No. C1017 C1018 C1019 C1020 C1021 C1022 C1023 C1024 C1025 C1026 C1027 C1028 C1029 C1030 C1031 C1032 C1033 C1034 C1035 C1036 C1037 C1038 C1039 C1040 C1041 C1044 C1044 C1045 C1045 C1047 C1048 C1049 C1050 C1051 C1052 C1053 C1056 C1057 C1058 C1059 C1060 C1061 C1062 C1063 C1064 C1065 C1066 C1067 C1068 C1101 C1104 C1105 C1113 C1202 C1203 C1204 C1205 C1206 Part No. 1-125-777-11 1-125-777-11 1-125-777-11 1-124-779-00 1-100-966-91 1-114-130-11 1-164-937-11 1-126-209-11 1-114-130-11 1-164-937-11 1-125-777-11 1-125-777-11 1-125-777-11 1-125-777-11 1-125-777-11 1-125-777-11 1-125-777-11 1-125-777-11 1-125-777-11 1-126-209-11 1-114-130-11 1-164-937-11 1-126-209-11 1-114-130-11 1-164-937-11 Description CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.1uF 0.1uF 10uF 10uF 1uF 0.001uF 100uF 1uF 0.001uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 100uF 1uF 0.001uF 100uF 1uF 0.001uF 1P 2PF 1P 2PF 0.1uF 1uF 0.001uF 100uF 10uF 1uF 0.001uF 1uF 0.1uF 0.01uF 1uF 0.1uF 0.001uF 1uF 0.1uF 0.001uF 0.001uF 1uF 0.1uF 0.001uF 0.001uF 1uF 0.1uF 1uF 1uF 0.1uF 1uF 0.01uF 0.01uF 10% 10% 10% 20% 20% Remarks 10V 10V 10V 16V 10V 6.3V 50V 4V 6.3V 50V 10V 10V 10V 10V 10V 10V 10V 10V 10V 4V 6.3V 50V 4V 6.3V 50V Ref. No. C1207 C1208 C1209 C1210 C1211 C1212 C1213 C1214 C1215 C1216 C1217 C1218 C1219 C1220 C1221 C1222 C1223 C1224 C1225 C1226 C1227 C1228 C1229 C1230 C1231 C1235 C1236 C1291 C1301 C1302 C1303 C1304 C1312 C1313 C1315 C1316 C1401 C1421 C1801 C1802 C1803 C1804 C1805 C1811 C1812 C1813 C1814 C1815 C2305 C2501 C2502 C2503 C2504 C2505 C2506 C3103 C3104 C3105 C3106 C3107 C3108 Part No. Description 0.001uF 1uF 0.001uF 0.001uF 0.1uF 0.1uF 0.1uF 0.1uF 100uF 1uF 1uF 1uF 1uF 1uF 1uF 0.1uF 1uF 0.01uF 0.01uF 0.001uF 1uF 0.001uF 0.001uF 0.1uF 10uF 10uF 100uF 0.1uF 2.2uF 0.1uF 0.1uF 47uF 0.1uF 0.1uF 2.2uF 10uF 0.01uF 1uF 1uF 2.2uF 220PF 330PF 0.047uF 1uF 2.2uF 100PF 150PF 0.047uF 1uF 1uF 1uF 1uF 1uF 1uF 10uF 100uF 1uF 0.1uF 0.001uF 1uF 220uF 10% 10% 10% 10% 10% 20% 20% 20% 10% Remarks 50V 6.3V 50V 50V 16V 16V 16V 16V 4V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 16V 6.3V 16V 16V 50V 6.3V 50V 50V 16V 10V 10V 4V 16V 10V 16V 16V 6.3V 16V 16V 10V 10V 16V 6.3V 6.3V 10V 16V 50V 10V 6.3V 10V 50V 50V 10V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 10V 16V 6.3V 16V 50V 6.3V 4V 1-164-937-11 CERAMIC CHIP 1-114-130-11 CERAMIC CHIP 1-164-937-11 1-164-937-11 1-107-820-11 1-107-820-11 1-107-820-11 1-107-820-11 1-126-209-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-107-820-11 1-114-130-11 1-164-943-81 1-164-943-81 1-164-937-11 1-114-130-11 1-164-937-11 1-164-937-11 1-107-820-11 1-100-966-91 1-100-966-91 1-126-209-11 1-107-820-11 1-125-889-91 1-107-820-11 1-107-820-11 1-126-205-11 1-107-820-11 1-107-820-11 1-125-889-11 1-100-966-91 1-164-943-81 1-114-130-11 1-114-130-11 1-125-889-11 1-164-882-11 1-164-934-11 1-119-923-11 1-114-130-11 1-125-889-11 1-164-874-11 1-164-878-11 1-119-923-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-100-966-91 1-117-681-11 1-114-130-11 1-107-820-11 1-164-937-11 1-114-130-11 1-126-210-21 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP
10% 10%
10% 20% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 20%
20%
1-164-840-11 CERAMIC CHIP 1-164-842-11 CERAMIC CHIP 1-164-840-11 CERAMIC CHIP 1-164-842-11 CERAMIC CHIP 1-125-777-11 CERAMIC CHIP 1-114-130-11 1-164-937-11 1-126-209-11 1-100-966-91 1-114-130-11 1-164-937-11 1-114-130-11 1-107-820-11 1-164-943-81 1-114-130-11 1-107-820-11 1-164-937-11 1-114-130-11 1-107-820-11 1-164-937-11 1-164-937-11 1-114-130-11 1-107-820-11 1-164-937-11 1-164-937-11 1-114-130-11 1-107-820-11 1-114-130-11 1-114-130-11 1-107-820-11 CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.25PF 50V (AUS) 0.25PF 50V (AEP, UK) 0.25PF 50V (AUS) 0.25PF 50V (AEP, UK) 10% 10V 6.3V 50V 4V 10V 6.3V 50V 6.3V 16V 16V 6.3V 16V 50V 6.3V 16V 50V 50V 6.3V 16V 50V 50V 6.3V 16V 6.3V 6.3V 16V 6.3V 16V 16V
10%
20%
10%
10%
10%
10% 10%
10% 10%
20% 20%
10% 20%
10% 10%
8-18
RD-65
Ref. No. C3201 C3202 C3203 C3204 C3206 C3207 C3211 C3212 * C3213 * C3214 C3215 C3216 C3217 C3218 C3219 C3220 C3301 C3302 C3303 C3303 C3304 Part No. Description 1000uF 0.1uF 0.001uF 330PF 0.1uF 47uF 100uF 0.1uF 560PF 560PF 82PF 82PF 0.1uF 100uF 220uF 1uF 7PF 7PF 5PF 15PF 68PF 20% Remarks 6.3V 16V 50V 50V 16V 6.3V 16V 16V 50V 50V 50V 50V 16V 16V 4V 6.3V 50V 50V 50V (AUS) 50V (AEP, UK) 50V (AUS) 50V (AEP, UK) 50V (AUS) 50V (AEP, UK) 10V 50V (AUS) 50V (AUS) 10V (AUS) 50V (AEP, UK) 50V (AUS) 50V (AUS) 50V (AUS) 50V (AUS) 50V (AUS) 10V (AUS) 50V (AEP, UK) 50V (AUS) 50V (AUS) 50V (AUS) 50V (AUS) 50V (AUS) Ref. No. C3325 C3325 C3329 C3330 C3331 Part No. Description 10uF 0.01uF 5PF 68PF 15PF 5% 5% 20% 10% Remarks 10V (AUS) 50V (AEP, UK) 50V (AUS) 50V (AUS) 50V (AUS) 6.3V 6.3V (AUS) 6.3V (AUS) 6.3V (AUS) 6.3V (AUS) 6.3V (AUS) 6.3V (AUS) 6.3V 16V 6.3V 10V 50V 50V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 16V 6.3V 16V 20% 20% 20% 10% 10% 20% 20% 10% 10% 5% 10% 20% 10% 10% 10% 10% 10% 16V 4V 4V 6.3V 6.3V 6.3V 16V 6.3V 6.3V 6.3V 1/16W 6.3V 16V 6.3V 10V 50V 50V 50V 50V 50V 6.3V 10V 1-126-916-11 ELECT 1-107-820-11 1-164-937-11 1-164-934-11 1-107-820-11 1-126-205-11 1-117-681-11 1-107-820-11 1-100-741-81 1-100-741-81 1-164-872-11 1-164-872-11 1-107-820-11 1-117-681-11 1-126-210-21 1-114-130-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP ELECT CHIP CERAMIC CHIP 1-100-966-91 CERAMIC CHIP 1-163-021-91 CERAMIC CHIP 1-164-845-11 CERAMIC CHIP 1-164-870-11 CERAMIC CHIP 1-164-854-11 CERAMIC CHIP
1-114-130-11 CERAMIC CHIP 1-114-130-11 CERAMIC CHIP 1-114-130-11 CERAMIC CHIP 1-114-130-11 CERAMIC CHIP 1-114-130-11 CERAMIC CHIP
1-162-912-11 CERAMIC CHIP 1-162-912-11 CERAMIC CHIP 1-164-845-11 CERAMIC CHIP 1-164-854-11 CERAMIC CHIP 1-164-870-81 CERAMIC CHIP
0.5PF 0.5PF
C3340 C3341 C3342 C3701 C3703 C3704 C3705 C3706 C3707 C3738 C3801 C3802 C3803 C3804 C4501 C4502 C4503 C4504 C4505 C4506 C4507 C4508 C4509 C4511 C4513 C4515 C4516 C4522 C4524 C4525 C4526 C4531 C4532 C4533 C4534 C4535 C4536 C4537 C4539 C4540 C4541 C4542
1-114-130-11 CERAMIC CHIP 1-114-130-11 CERAMIC CHIP 1-114-130-11 CERAMIC CHIP 1-164-943-81 CERAMIC CHIP 1-114-130-11 CERAMIC CHIP 1-100-966-91 1-164-937-11 1-164-937-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-107-820-11 1-114-130-11 1-107-820-11 1-117-681-11 1-126-210-21 1-126-210-21 1-127-760-11 1-127-760-11 1-126-205-11 1-124-779-00 1-114-130-11 1-127-760-11 1-127-760-11 1-218-967-11 1-114-130-11 1-164-943-81 1-114-130-11 1-100-966-91 1-164-937-11 1-164-937-11 1-164-937-11 1-164-937-11 1-164-937-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP ELECT CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP RES-CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
1uF 1uF 1uF 0.01uF 1uF 10uF 0.001uF 0.001uF 1uF 1uF 1uF 1uF 1uF 1uF 1uF 1uF 1uF 0.1uF 1uF 0.1uF 100uF 220uF 220uF 4.7uF 4.7uF 47uF 10uF 1uF 4.7uF 4.7uF 15K 1uF 0.01uF 1uF 10uF 0.001uF 0.001uF 0.001uF 0.001uF 0.001uF 1uF 2.2uF
5% 5%
10%
1-164-872-11 CERAMIC CHIP 1-164-854-11 CERAMIC CHIP 1-164-858-11 CERAMIC CHIP 1-100-966-91 CERAMIC CHIP 1-162-912-11 CERAMIC CHIP
5% 5% 5% 20% 0.5PF
1-162-912-11 CERAMIC CHIP 1-100-966-91 CERAMIC CHIP 1-163-021-91 CERAMIC CHIP 1-162-912-11 CERAMIC CHIP 1-162-912-11 CERAMIC CHIP
1-164-845-11 CERAMIC CHIP 1-164-870-11 CERAMIC CHIP 1-164-854-11 CERAMIC CHIP 1-100-966-91 CERAMIC CHIP 1-163-021-91 CERAMIC CHIP
1-162-912-11 CERAMIC CHIP 1-162-912-11 CERAMIC CHIP 1-164-845-11 CERAMIC CHIP 1-164-870-11 CERAMIC CHIP 1-164-854-11 CERAMIC CHIP
0.5PF 0.5PF
5% 5%
10%
8-19
RD-65
Ref. No. C4543 C4553 C4555 C4556 C4557 C4558 C4559 C4562 C4563 C4567 C4570 C4571 C4572 C4573 C4585 C4586 C4701 C4702 C4703 C4704 C4705 C4706 C5104 C5105 C5106 C5107 C5108 C5109 C5110 C5111 C5112 C5113 C5114 C5115 C5116 C5117 C5118 C5119 C5120 C5121 C5122 C5123 C5132 C5133 C5205 C5209 C5210 C5211 C5212 C5213 C5216 C5217 C5218 C5219 C5222 C5223 C5601 C5602 C5603 C5604 C5605 Part No. Description 0.001uF 0.001uF 4.7uF 4.7uF 0.01uF 100uF 100uF 1uF 1uF 1uF 1uF 4.7uF 220uF 4.7uF 0.1uF 100uF 1uF 1uF 1uF 0.001uF 0.001uF 0.001uF 0.1uF 1uF 1uF 1uF 1uF 0.1uF 1uF 1uF 1uF 0.1uF 0.1uF 1uF 1uF 12PF 12PF 270PF 1uF 100uF 100uF 1uF 1uF 1uF 1uF 0.1uF 100uF 0.001uF 2.2uF 1uF 0.001uF 1uF 0.001uF 0.001uF 0.1uF 0.001uF 1uF 1uF 0.1uF 0.01uF 0.01uF 10% 10% 10% 10% 10% 20% 20% Remarks 50V 50V 6.3V 6.3V 16V 16V 16V 6.3V 6.3V 6.3V 6.3V 6.3V 4V 6.3V 16V 16V 6.3V 6.3V 6.3V 50V 50V 50V 16V 6.3V 6.3V 6.3V 6.3V 16V 6.3V 6.3V 6.3V 16V 16V 6.3V 6.3V 50V 50V 50V 6.3V 4V 4V 6.3V 6.3V 6.3V 6.3V 16V 16V 50V 10V 6.3V 50V 6.3V 50V 50V 16V 50V 6.3V 6.3V 16V 16V 16V Ref. No. C5606 C5607 C5608 C5609 C5610 C5611 C5612 C5613 C5614 C5615 C5616 C5617 C5622 C5623 C5624 C5625 C5626 C5627 C5628 C5629 C5630 C5631 C5632 C5640 C5641 C5702 C5704 C5705 C5706 C5707 C5708 C5801 C5802 C5803 C5804 C5805 C5806 C5807 C5808 C5809 C5812 C5813 C5814 C5815 C5816 C5817 C5818 C5819 C5820 C5821 C5822 Part No. Description 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 0.1uF 100uF 0.01uF 0.1uF 0.1uF 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 15PF 15PF 1uF 1uF 0.001uF 0.001uF 1uF 220uF 1uF 0.001uF 1uF 0.001uF 1uF 1uF 1uF 1uF 220uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.001uF 1uF 0.001uF 0.001uF 10% 10% 10% 10% 10% 10% 10% 20% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 5% 5% 20% 10% 10% 20% Remarks 16V 16V 16V 16V 16V 16V 10V 4V 16V 10V 10V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 50V 50V 6.3V 50V 50V 50V 6.3V 4V 6.3V 50V 6.3V 50V 6.3V 6.3V 6.3V 6.3V 4V 16V 16V 16V 25V 25V 25V 25V 50V 6.3V 50V 50V 1-164-937-11 CERAMIC CHIP 1-162-964-11 CERAMIC CHIP 1-127-760-11 CERAMIC CHIP 1-127-760-11 1-164-943-81 1-117-681-11 1-117-681-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-127-760-11 1-126-210-21 1-127-760-11 1-107-820-11 1-117-681-11 1-114-130-11 1-114-130-11 1-114-130-11 1-164-937-11 1-164-937-11 1-164-937-11 1-107-820-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-107-820-11 1-114-130-11 1-114-130-11 1-114-130-11 1-107-820-11 1-107-820-11 1-114-130-11 1-114-130-11 1-164-852-11 1-164-852-11 1-100-574-81 1-114-130-11 1-126-209-11 1-126-209-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-107-820-11 1-117-681-11 1-164-937-11 1-125-889-11 1-114-130-11 1-164-937-11 1-114-130-11 1-164-937-11 1-164-937-11 1-107-820-11 1-164-937-11 1-114-130-11 1-114-130-11 CERAMIC CHIP CERAMIC CHIP ELECT CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 1-164-943-81 CERAMIC CHIP 1-164-943-81 CERAMIC CHIP 1-164-943-81 1-164-943-81 1-164-943-81 1-164-943-81 1-125-777-11 1-126-209-11 1-164-943-81 1-125-777-11 1-125-777-11 1-164-943-81 1-164-943-81 1-164-943-81 1-164-943-81 1-164-943-81 1-164-943-81 1-164-943-81 1-164-943-81 1-164-943-81 1-164-943-81 1-164-943-81 1-164-943-81 1-164-854-11 1-164-854-11 1-114-130-11 1-126-193-11 1-164-937-11 1-164-937-11 1-114-130-11 1-126-210-21 1-114-130-11 1-164-937-11 1-114-130-11 1-164-937-11 1-114-130-11 1-114-130-11 1-114-130-11 1-114-130-11 1-126-210-21 1-107-820-11 1-107-820-11 1-164-360-11 1-100-566-91 1-100-566-91 1-100-566-91 1-100-566-91 1-164-937-11 1-114-130-11 1-164-937-11 1-164-937-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP < CONNECTOR > CN201 CN501 CN601 * CN4501 CN4701 1-817-705-51 1-766-767-51 1-784-857-51 1-564-729-11 1-779-338-51 CONNECTOR, FPC 10P CONNECTOR, FPC 12P CONNECTOR, FFC (LIF (NON-ZIF)) 5P PIN, CONNECTOR (SMALL TYPE) 13P CONNECTOR, FFC/FPC 28P
10% 10%
5% 5% 10%
20% 20%
20%
10% 10%
CN5101 1-819-414-11 PIN, CONNECTOR (1.5MM) 6P CN5201 1-820-176-11 PIN, CONNECTOR (1.5MM) 10P
8-20
RD-65
Ref. No. Part No. Description < DIODE > D101 D3201 D3711 D3712 D4521 D4552 D4571 8-719-077-34 8-719-941-86 8-719-058-24 8-719-058-24 8-719-058-24 DIODE DIODE DIODE DIODE DIODE SML-310YTT86 DAN202UT106 RB501V-40TE-17 RB501V-40TE-17 RB501V-40TE-17 Remarks Ref. No. Q2503 Q2504 Q2505 Q3301 Q3302 Q3303 Q3304 Q3305 Q3306 Q3307 Q3308 Q4581 Q5701 Q5801 Q5804 Q5805 Q5808 Q5809 Part No. Description ISA1602AM1TP-1EF ISA1602AM1TP-1EF ISA1602AM1TP-1EF ISA1602AM1TP-1EF 2SC4154TP-1EF ISA1602AM1TP-1EF (AUS) 2SC4154TP-1EF (AUS) ISA1602AM1TP-1EF (AUS) 2SC4154TP-1EF (AUS) ISA1602AM1TP-1EF (AUS) 2SC4154TP-1EF (AUS) 2SC4154TP-1EF 2SC4154TP-1EF UMXIN-TN DTC124EUA-T106 ISA1602AM1TP-1EF 2SK2034 UMD2N-TR Remarks 6-551-699-01 TRANSISTOR 6-551-699-01 6-551-699-01 6-551-699-01 8-729-620-13 6-551-699-01 8-729-620-13 6-551-699-01 8-729-620-13 6-551-699-01 8-729-620-13 8-729-620-13 8-729-620-13 6-550-376-01 8-729-029-06 6-551-699-01 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
IC1201 IC1221 IC1301 IC1302 IC3101 IC3202 IC3701 IC3702 IC3707 IC4541 IC4702 IC5103 IC5202 IC5203 IC5602 IC5701 * IC5802
6-708-305-01 6-708-305-01 8-759-693-13 8-759-693-13 6-710-840-01 8-759-100-96 8-759-679-05 6-706-487-01 6-707-472-01 6-702-362-01 8-759-592-47 6-706-365-01 6-710-887-01 6-706-487-01 6-806-103-01
IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC
K4H511638C-UCB3T K4H511638C-UCB3T NJM12904V (TE2) NJM12904V (TE2) AK5358AET-E2 uPC4558G2 TC7WH34FU (TE12R) TC7SH08FU (T5RSOYJF) PST3813UL MM1563DFBE TC7SZ08FU (TE85R) uPD72852AGB-8EU-A R5523N001B-TR-F TC7SH08FU (T5RSOYJF) 88SA8040-TBC1C000
R104 R105 R107 R108 R109 R110 R111 R112 R114 R115 R116 R117 R119 R124 R128 R129 R130 R131 R132 R133 R134 R135 R136 R137 R138 R139 R165 R166 R167 R168 R170 R171 R172 R174 R192 R193 R201 R202 R203 R204
1-218-966-11 1-218-990-81 1-218-973-11 1-218-963-11 1-208-702-11 1-218-953-11 1-218-985-11 1-218-985-11 1-218-971-11 1-218-990-81 1-218-959-11 1-218-939-11 1-218-990-81 1-218-990-81 1-218-990-81 1-218-990-81 1-218-945-11 1-218-945-11 1-218-945-11 1-218-945-11 1-218-973-11 1-218-945-11 1-218-945-11 1-218-945-11 1-218-973-11 1-218-945-11 1-218-952-11 1-218-952-11 1-218-952-11 1-218-990-81 1-218-959-11 1-218-959-11 1-218-959-11 1-218-863-11 1-216-809-11 1-218-990-81 1-218-965-11 1-218-935-11 1-218-935-11 1-242-963-21
RES-CHIP SHORT CHIP RES-CHIP RES-CHIP METAL CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP RES-CHIP RES-CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP METAL CHIP METAL CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES, NETWORK
12K 0 47K 6.8K 6.2K 1K 470K 470K 33K 0 3.3K 68 0 0 0 0 220 220 220 220 47K 220 220 220 47K 220 820 820 820 0 3.3K 3.3K 3.3K 4.7K 100
5% 5% 5% 0.5% 5% 5% 5% 5%
JA5701 1-793-446-21 JACK, PIN 1P JA5801 1-821-450-12 CONNECTOR, HDMI < COIL > L105 L1005 L1801 L1811 L3301 L3302 L3303 L3304 L3305 L3306 L3307 L3308 L4551 L5101 L5201 L5202 L5701 L5801 L5802 L5803 L5804 1-469-967-21 1-412-008-31 1-412-958-21 1-412-953-11 1-412-954-11 1-412-951-11 1-412-954-11 1-412-951-11 1-412-954-11 1-412-951-11 1-412-954-11 1-412-951-11 1-469-967-21 1-414-235-22 1-456-799-11 1-456-799-11 1-400-330-21 1-457-374-21 1-457-374-21 1-457-374-21 INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR 10uH 15uH 39uH 15uH 18uH 10uH 18uH (AUS) 10uH (AUS) 18uH (AUS) 10uH (AUS)
5% 5%
1/16W 1/16W
5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W
INDUCTOR 18uH (AUS) INDUCTOR 10uH (AUS) INDUCTOR 10uH INDUCTOR, FERRITE BEAD COIL, COMMON MODE CHOKE COIL, COMMON MODE CHOKE INDUCTOR, FERRITE BEAD (1608) COMMOM MODE CHOKE COIL COMMOM MODE CHOKE COIL COMMOM MODE CHOKE COIL
5% 5% 5% 0.5% 5%
0 10K 5% 33 5% 33 5% 33 (1005X4)
8-21
RD-65
Ref. No. R205 R206 R210 R211 R219 R220 R221 R222 R223 R230 R233 R234 R236 R237 R238 R239 R240 R241 R242 R243 R244 R245 R248 R252 R253 R256 R271 R273 R274 R281 R301 R306 R307 R310 R311 R312 R313 R314 R317 R318 R319 R320 R503 R504 R505 R506 R507 R510 R511 R515 R516 R601 R602 R603 R604 R1001 R1003 R1004 R1005 R1006 R1013 Part No. 1-242-963-21 1-242-963-21 1-218-935-11 1-218-990-81 1-234-377-21 1-234-377-21 1-218-973-11 1-218-973-11 1-218-933-11 1-218-990-81 1-218-990-81 1-218-990-81 1-218-933-11 1-218-965-11 1-218-933-11 1-218-965-11 1-218-933-11 1-218-965-11 1-218-933-11 1-218-965-11 1-218-933-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-216-295-91 1-216-295-91 1-216-295-91 1-218-990-81 1-218-973-11 1-218-957-11 1-218-957-11 1-218-953-11 1-218-953-11 1-218-953-11 1-218-973-11 1-218-953-11 1-242-963-21 1-242-963-21 1-242-963-21 1-242-963-21 1-218-953-11 1-218-953-11 1-218-966-11 1-218-953-11 1-218-953-11 1-217-907-11 1-217-907-11 1-218-971-11 1-218-966-11 1-218-965-11 1-218-965-11 1-218-953-11 1-218-953-11 1-218-965-11 1-218-843-11 1-218-839-11 1-218-967-11 1-218-967-11 Description RES, NETWORK RES, NETWORK RES-CHIP SHORT CHIP RES, NETWORK RES, NETWORK RES-CHIP RES-CHIP RES-CHIP SHORT CHIP SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP METAL CHIP METAL CHIP RES-CHIP RES-CHIP 33 (1005X4) 33 (1005X4) 33 5% 0 4.7K (1005X4) 4.7K (1005X4) 47K 5% 47K 5% 22 5% 0 0 0 22 10K 22 10K 22 10K 22 10K 22 10K 10K 10K 10K 10K 0 0 0 0 47K 2.2K 2.2K 1K 1K Remarks Ref. No. R1016 R1017 R1018 R1019 R1021 R1027 R1028 R1029 R1030 Part No. 1-218-965-11 1-218-990-81 1-218-990-81 1-218-990-81 1-218-965-11 1-218-965-11 1-218-965-11 1-218-940-11 1-218-937-11 Description RES-CHIP SHORT CHIP SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 10K 0 0 0 10K 10K 10K 82 47 5% Remarks 1/16W
1/16W
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W (AUS) 1/16W (AEP, UK) 1/16W (AUS) 1/16W (AEP, UK)
R1030 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W R1031 R1031 R1032 R1033 R1034 R1035 R1036 R1037 R1039 R1040 R1066 R1067 R1068 R1069 R1071 R1103 R1107 R1110 R1111 R1132 R1153 R1161 R1163 R1164 R1181 R1182 R1191 R1195 R1199 1/16W 1/16W 1/16W 1/16W 1/16W 1/10W 1/10W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/10W 1/10W 1/16W 1/16W 1/16W R1205 R1219 R1240 R1241 R1242 R1243 R1244 R1245 R1246 R1247 R1248 R1249 R1250 R1251 R1252 R1255 R1256 R1257 R1258
1-218-941-81 RES-CHIP 1-218-943-11 RES-CHIP 1-218-945-11 RES-CHIP 1-234-378-21 RES, NETWORK 1-234-378-21 RES, NETWORK 1-234-378-21 1-234-378-21 1-211-984-11 1-218-823-11 1-211-984-11 1-218-823-11 1-218-973-11 1-218-973-11 1-218-973-11 1-218-973-11 1-218-965-11 1-218-990-81 1-218-990-81 1-218-990-81 1-218-977-11 1-218-937-11 1-218-961-11 1-218-961-11 1-218-961-11 1-218-961-11 1-218-965-11 1-218-965-11 1-218-961-11 1-218-961-11 1-218-965-11 1-218-965-11 1-218-990-81 1-218-933-11 1-234-400-21 1-234-400-21 1-218-990-81 1-218-935-11 1-234-370-21 1-234-370-21 1-218-933-11 1-234-400-21 1-234-400-21 1-218-990-81 1-218-935-11 1-218-935-11 1-234-370-21 1-234-370-21 1-218-933-11 1-218-933-11 RES, NETWORK RES, NETWORK METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
5% 5% 5%
10K (1005X4) 10K (1005X4) 10K (1005X4) 10K (1005X4) 43 0.5% 100 0.5% 43 0.5% 100 47K 47K 47K 47K 10K 0 0 0 100K 47 4.7K 4.7K 4.7K 4.7K 10K 10K 4.7K 4.7K 10K 0.5% 5% 5% 5% 5% 5%
5% 5% 5% 5% 5%
5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W
1K 5% 47K 5% 1K 5% 33 (1005X4) 33 (1005X4) 33 (1005X4) 33 (1005X4) 1K 5% 1K 5% 12K 5% 1K 1K 1.8 1.8 33K 12K 10K 10K 1K 1K 10K 680 470 15K 15K 10K 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 0.5% 0.5% 5% 5% 5%
RES-CHIP 10K 5% 1/16W SHORT CHIP 0 RES-CHIP 22 5% 1/16W CONDUCTOR, NETWORK (1005X4) CONDUCTOR, NETWORK (1005X4) SHORT CHIP RES-CHIP RES, NETWORK RES, NETWORK RES-CHIP 0 33 5% 22 (1005X4) 22 (1005X4) 22 5%
1/16W
1/16W
CONDUCTOR, NETWORK (1005X4) CONDUCTOR, NETWORK (1005X4) SHORT CHIP 0 RES-CHIP 33 5% 1/16W RES-CHIP 33 5% 1/16W RES, NETWORK RES, NETWORK RES-CHIP RES-CHIP 22 (1005X4) 22 (1005X4) 22 5% 22 5%
1-218-965-11 RES-CHIP
1/16W 1/16W
8-22
RD-65
Ref. No. R1260 R1261 R1262 R1263 R1264 R1265 R1266 R1267 R1268 R1269 R1270 R1271 R1272 R1273 R1274 R1275 R1276 R1277 R1278 R1279 R1281 R1282 R1283 R1284 R1285 R1286 R1287 R1288 R1289 R1301 R1302 R1303 R1312 R1313 R1314 R1401 R1402 R1403 R1404 R1405 R1406 R1407 R1411 R1412 R1413 R1414 R1415 R1416 R1421 R1422 R1802 R1803 R1804 R1812 R1813 R1814 R2301 R2302 R2304 R2316 R2501 Part No. Description 22 5% Remarks 1/16W Ref. No. R2502 R2504 R2505 R2506 R2507 R2508 R2510 R2511 R2513 R2514 R3002 R3003 R3004 R3005 R3006 R3007 R3008 R3009 R3010 R3011 R3012 R3101 R3102 R3103 R3104 R3105 R3106 R3107 R3108 R3109 R3111 R3113 R3201 R3202 R3203 R3204 R3206 R3207 R3208 R3209 R3210 R3211 R3213 R3214 R3215 R3216 R3217 R3218 R3219 R3220 R3221 R3222 R3223 R3224 R3227 R3228 R3229 R3230 R3232 R3233 R3234 Part No. 1-218-827-11 1-218-951-11 1-218-827-11 1-216-864-11 1-218-951-11 1-218-827-11 1-218-951-11 1-218-827-11 1-218-951-11 1-218-827-11 1-218-990-81 1-218-990-81 1-218-990-81 1-234-378-21 1-218-990-81 1-218-990-81 1-218-990-81 1-218-990-81 1-218-990-81 1-218-990-81 1-218-990-81 1-218-990-81 1-218-990-81 1-218-990-81 1-218-990-81 1-218-989-11 1-218-965-11 1-218-937-11 1-218-937-11 1-218-937-11 1-218-990-81 1-218-965-11 1-218-937-11 1-218-937-11 1-218-937-11 1-218-990-81 1-218-937-11 1-218-937-11 1-218-937-11 1-218-977-11 1-218-849-11 1-218-871-11 1-218-951-11 1-218-963-11 1-218-969-11 1-218-849-11 1-218-871-11 1-218-879-11 1-218-963-11 1-218-941-81 1-218-941-81 1-218-963-11 1-218-879-11 1-218-941-81 1-218-941-81 1-218-965-11 1-218-965-11 1-216-295-91 1-218-990-81 1-218-990-81 Description METAL CHIP RES-CHIP METAL CHIP SHORT CHIP RES-CHIP METAL CHIP RES-CHIP METAL CHIP RES-CHIP METAL CHIP SHORT CHIP SHORT CHIP SHORT CHIP RES, NETWORK SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP METAL CHIP METAL CHIP RES-CHIP RES-CHIP RES-CHIP METAL CHIP METAL CHIP METAL CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP METAL CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP SHORT CHIP SHORT CHIP 150 680 150 0 680 150 680 150 680 150 0.5% 5% 0.5% 5% 0.5% 5% 0.5% 5% 0.5% Remarks 1/10W 1/16W 1/10W 1/16W 1/10W 1/16W 1/10W 1/16W 1/10W 1-218-933-11 RES-CHIP 1-234-400-21 1-234-400-21 1-218-990-81 1-218-935-11 1-234-370-21 1-234-370-21 1-218-933-11 1-234-400-21 1-234-400-21 1-218-990-81 1-218-935-11 1-218-935-11 1-234-370-21 1-234-370-21 1-218-933-11 1-218-933-11 1-218-990-81 1-218-990-81 1-218-948-11 1-234-371-21 1-234-371-21 1-234-371-21 1-218-937-11 1-218-937-11 1-218-937-11 1-234-371-21 1-218-933-11 1-218-933-11 1-218-839-11 1-218-847-11 1-218-847-11 1-218-847-11 1-218-847-11 1-216-864-11 1-218-933-11 1-218-933-11 1-218-933-11 1-218-933-11 1-218-933-11 1-218-933-11 1-218-933-11 1-234-378-21 1-218-965-11 1-218-973-11 1-218-933-11 1-218-933-11 1-218-933-11 1-218-965-11 1-218-965-11 1-218-945-11 1-218-947-11 1-218-935-11 1-218-945-11 1-218-947-11 1-218-935-11 1-218-959-11 1-218-990-81 1-218-990-81 1-218-965-11 1-218-951-11
CONDUCTOR, NETWORK (1005X4) CONDUCTOR, NETWORK (1005X4) SHORT CHIP 0 RES-CHIP 33 5% 1/16W RES, NETWORK 22 (1005X4) RES, NETWORK 22 (1005X4) RES-CHIP 22 5% 1/16W CONDUCTOR, NETWORK (1005X4) CONDUCTOR, NETWORK (1005X4) SHORT CHIP 0 RES-CHIP RES-CHIP RES, NETWORK RES, NETWORK RES-CHIP RES-CHIP SHORT CHIP SHORT CHIP RES-CHIP RES, NETWORK RES, NETWORK RES, NETWORK RES-CHIP RES-CHIP RES-CHIP RES, NETWORK RES-CHIP RES-CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES, NETWORK RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP 33 5% 33 5% 22 (1005X4) 22 (1005X4) 22 5% 22 5% 0 0 390 5% 47 (1005X4) 47 (1005X4) 47 (1005X4) 47 5% 47 5% 47 5% 47 (1005X4) 22 5% 22 5% 470 0.5% 1K 0.5% 1K 1K 1K 0 22 22 22 22 22 22 0.5% 0.5% 0.5% 5% 5% 5% 5% 5% 5% 1/16W 1/16W
0 0 0 10K (1005X4) 0 0 0 0 0 0 0 0 0 0 0 1M 10K 47 47 47 0 10K 47 47 47 0 47 47 47 100K 1.2K 10K 680 6.8K 22K 1.2K 10K 22K 6.8K 100 100 6.8K 22K 100 100 10K 10K 0 0 0 0 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W
1/16W 1/16W
1/16W
1/16W 1/16W 1/10W 1/10W 1/10W 1/10W 1/10W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W
5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/10W 1/10W 1/16W 1/16W 1/16W 1/10W 1/10W 1/10W 1/16W 1/16W 1/16W 1/16W 1/10W 1/16W 1/16W 1/16W 1/16W
22 5% 10K (1005X4) 10K 5% 47K 5% 22 5% 22 22 10K 10K 220 330 33 220 330 33 3.3K 0 0 10K 680 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5%
5% 5%
1/16W 1/16W
8-23
RD-65
Ref. No. R3301 R3302 R3302 R3305 R3306 R3307 R3307 R3308 R3309 R3310 R3312 R3313 R3314 R3315 R3317 R3318 R3319 R3320 R3322 Part No. Description 47 47 5% 5% Remarks 1/16W 1/16W (AUS) 1/16W 1/10W 1/16W (AEP, UK) 1/16W (AUS) 1/16W 1/16W 1/16W (AEP, UK) 1/10W (AUS) 1/16W (AUS) 1/16W (AUS) 1/16W 1/16W (AUS) 1/10W (AUS) 1/16W (AUS) 1/16W 1/16W (AUS) 1/10W (AUS) 1/16W (AUS) 1/16W (AUS) 1/16W (AUS) 1/16W 1/16W (AUS) 1/16W (AEP, UK) 1/16W (AUS) Ref. No. R3814 R3816 R3817 R3818 R3820 R3821 R3823 R3824 R3828 R3829 R3830 R3831 R3832 R3833 R3835 R3837 R3838 R3839 R3840 R3841 R3842 R3843 R3844 R3845 R3846 R3847 R3848 R3849 R3850 R3851 R3857 R3862 R3871 R4501 R4504 R4505 R4507 R4511 R4521 R4531 R4541 R4552 R4553 R4554 R4556 R4558 R4559 R4573 R4574 R4575 R4581 R4701 R4702 R4703 R4704 R4705 R4706 R4707 R4708 R4709 R4710 Part No. 1-218-933-11 1-218-940-11 1-218-940-11 1-218-933-11 1-218-940-11 1-218-933-11 1-218-940-11 1-242-962-21 1-234-379-21 1-234-379-21 1-234-379-21 1-234-379-21 1-234-379-21 1-234-379-21 1-218-935-11 1-242-963-21 1-242-963-21 1-242-963-21 1-242-963-21 1-218-940-11 1-218-962-11 1-218-933-11 1-218-933-11 1-218-940-11 1-218-953-11 1-218-933-11 1-218-940-11 1-218-965-11 1-218-935-11 1-242-963-21 1-218-990-81 1-218-990-81 1-218-969-11 1-216-295-91 1-216-059-00 1-216-059-00 1-216-059-00 1-218-990-81 1-218-963-11 1-218-990-81 1-218-990-81 1-216-295-91 1-216-295-91 1-216-295-91 1-216-295-91 1-218-969-11 1-218-990-81 1-218-990-81 1-216-864-11 1-216-864-11 1-218-941-81 1-234-372-11 1-234-372-11 1-218-941-81 1-218-990-81 1-218-990-81 1-218-990-81 1-218-965-11 1-234-378-21 1-234-378-21 Description RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES-CHIP RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES, NETWORK SHORT CHIP SHORT CHIP RES-CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP RES-CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP RES-CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP RES-CHIP RES, NETWORK RES, NETWORK RES-CHIP SHORT CHIP SHORT CHIP SHORT CHIP RES-CHIP RES, NETWORK RES, NETWORK 22 82 82 22 82 5% 5% 5% 5% 5% Remarks 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1-218-937-11 RES-CHIP 1-218-937-11 RES-CHIP 1-218-990-81 SHORT CHIP 1-218-947-11 RES-CHIP 1-218-839-11 METAL CHIP 1-208-893-11 METAL CHIP 1-208-905-11 METAL CHIP 1-218-929-11 RES-CHIP 1-218-951-11 RES-CHIP 1-218-965-11 RES-CHIP 1-218-839-11 METAL CHIP 1-208-905-11 METAL CHIP 1-218-929-11 RES-CHIP 1-218-951-11 RES-CHIP 1-218-947-11 RES-CHIP 1-218-839-11 METAL CHIP 1-218-929-11 RES-CHIP 1-218-951-11 RES-CHIP 1-218-947-11 RES-CHIP
0 (AEP, UK) 330 5% 470 1.8K 5.6K 10 680 10K 470 5.6K 10 680 330 470 10 680 330 0.5% 0.5% 0.5% 5% 5% 5% 0.5% 0.5% 5% 5% 5% 0.5% 5% 5% 5%
22 5% 82 5% 82 (1005X4) 22K (1005X4) 22K (1005X4) 22K (1005X4) 22K (1005X4) 22K (1005X4) 22K (1005X4) 33 5% 33 (1005X4) 33 (1005X4) 33 (1005X4) 33 (1005X4) 82 5% 5.6K 22 22 82 1K 5% 5% 5% 5% 5%
1/16W
1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W
R3323 R3324 R3325 R3326 R3327 R3336 R3336 R3337 R3341 R3341 R3342 R3344 R3703 R3704 R3705 R3708 R3715 R3716 R3720 R3738 R3808 R3810 R3811 R3812 R3813
1-218-839-11 METAL CHIP 1-208-905-11 METAL CHIP 1-208-905-11 METAL CHIP 1-218-929-11 RES-CHIP 1-218-951-11 RES-CHIP 1-218-937-11 RES-CHIP 1-218-990-81 SHORT CHIP 1-218-965-11 RES-CHIP 1-218-937-11 RES-CHIP 1-218-990-81 SHORT CHIP 1-218-965-11 RES-CHIP 1-218-947-11 RES-CHIP 1-218-941-81 RES-CHIP 1-218-941-81 RES-CHIP 1-218-941-81 RES-CHIP 1-218-965-11 1-218-990-81 1-218-935-11 1-218-990-81 1-218-965-11 1-218-941-81 1-242-963-21 1-242-963-21 1-242-963-21 1-242-963-21 RES-CHIP SHORT CHIP RES-CHIP SHORT CHIP RES-CHIP RES-CHIP RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK
5% 5% 5% 5% 5%
0 (AEP, UK) 10K 5% 47 0 (AEP, UK) 10K 330 100 100 100 10K 0 33 0 10K 5% 5% 5% 5% 5% 5% 5% 5% 5%
1/16W (AEP, UK) 1/16W (AUS) 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W
1/16W
100 5% 100 (1005X4) 100 (1005X4) 100 5% 0 0 0 10K 5% 10K (1005X4) 10K (1005X4) 10K 5%
1/16W
1/16W
1/16W
1-218-965-11 RES-CHIP
1/16W
8-24
RD-65
Ref. No. R4711 R4712 R4713 R4714 R4721 R4722 R4723 R4724 R4725 R4726 R4727 R4728 R4729 R4731 R4732 R5101 R5102 R5103 R5104 R5105 R5106 R5107 R5108 R5109 R5110 R5111 R5113 R5114 R5115 R5116 R5117 R5118 R5119 R5120 R5121 R5122 R5123 R5124 R5125 R5127 R5129 R5130 R5131 R5132 R5133 R5134 R5135 R5140 R5141 R5201 R5202 R5203 R5204 R5205 R5207 R5212 R5213 R5214 R5215 R5216 R5217 Part No. 1-218-965-11 1-218-965-11 1-218-965-11 1-218-990-81 1-234-372-11 1-234-372-11 1-218-937-11 1-218-933-11 1-218-933-11 1-218-933-11 1-218-965-11 1-218-965-11 1-218-990-81 1-218-961-11 1-218-961-11 1-234-381-11 1-234-381-11 1-218-977-11 1-218-977-11 1-234-702-11 1-234-702-11 1-218-939-11 1-218-939-11 1-218-937-11 1-218-965-11 1-218-953-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-977-11 1-218-870-11 1-211-987-11 1-211-987-11 1-211-987-11 1-211-987-11 1-218-965-11 1-218-965-11 1-218-953-11 1-218-965-11 1-218-940-11 1-218-990-81 1-218-864-11 1-218-990-81 1-218-990-81 1-218-990-81 1-218-990-81 1-218-965-11 1-218-990-81 1-218-990-81 1-218-990-81 1-218-859-11 1-218-845-11 1-218-939-11 1-218-990-81 1-218-990-81 1-218-990-81 1-218-973-11 1-218-973-11 Description RES-CHIP RES-CHIP RES-CHIP SHORT CHIP RES, NETWORK RES, NETWORK RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP RES-CHIP RES-CHIP RES, NETWORK RES, NETWORK RES-CHIP RES-CHIP RES, NETWORK RES, NETWORK RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP METAL CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP RES-CHIP SHORT CHIP SHORT CHIP SHORT CHIP METAL CHIP METAL CHIP RES-CHIP SHORT CHIP SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP 10K 10K 10K 0 5% 5% 5% Remarks 1/16W 1/16W 1/16W Ref. No. R5220 R5221 R5222 R5445 R5606 R5607 R5608 R5609 R5610 R5612 R5613 R5614 R5615 R5617 R5618 R5619 R5622 R5623 R5624 R5626 R5627 R5628 R5629 R5630 R5631 R5632 R5638 R5642 R5646 R5650 R5651 R5652 R5657 R5658 R5659 R5661 R5664 R5672 R5688 R5689 R5690 R5692 R5693 R5701 R5702 R5703 R5704 R5705 R5706 R5707 R5803 R5804 R5805 R5806 R5807 R5808 R5809 R5812 R5813 R5814 R5815 Part No. Description 1.5K 47K 10 0 82 82 10K 10K 1K 10K 1K 1K 1K 1K 10K 1K 82 82 82 22 82 22 82 0.5% 5% 5% Remarks 1/10W 1/16W 1/16W 1-218-851-11 METAL CHIP 1-218-973-11 RES-CHIP 1-218-929-11 RES-CHIP 1-216-295-91 1-218-940-11 1-218-940-11 1-218-965-11 1-218-965-11 1-218-953-11 1-218-965-11 1-218-953-11 1-218-953-11 1-218-953-11 1-218-953-11 1-218-965-11 1-218-953-11 1-218-940-11 1-218-940-11 1-218-940-11 1-218-933-11 1-218-940-11 1-218-933-11 1-218-940-11 1-218-940-11 1-218-933-11 1-242-963-21 1-242-963-21 1-242-963-21 1-242-963-21 1-218-940-11 1-218-873-11 1-218-941-81 1-218-953-11 1-218-953-11 1-218-953-11 1-218-953-11 1-216-864-11 1-216-864-11 1-218-989-11 1-218-953-11 1-218-990-81 1-218-990-81 1-218-990-81 1-218-949-11 1-218-949-11 1-218-951-11 1-218-943-11 1-216-864-11 1-211-990-11 1-218-977-11 1-164-360-11 1-218-973-11 1-218-961-11 1-218-953-11 1-218-962-11 1-218-961-11 1-218-958-11 1-218-961-11 SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES-CHIP METAL CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP SHORT CHIP SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP METAL CHIP RES-CHIP CERAMIC CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W
4.7K 5% 100K (1005X4) 100K (1005X4) 100K 5% 100K 5% 68 (1005X4) 68 (1005X4) 68 5% 68 5% 47 5% 10K 1K 10K 10K 10K 10K 100K 9.1K 56 56 56 56 10K 10K 1K 10K 82 0 5.1K 0 0 0 0 10K 0 0 0 3.3K 820 68 0 0 0 47K 47K 0 0 5% 5% 5% 5% 5% 5% 5% 0.5% 0.5% 0.5% 0.5% 0.5% 5% 5% 5% 5% 5% 0.5%
1/16W 1/16W
1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/10W 1/10W 1/10W 1/10W 1/10W 1/16W 1/16W 1/16W 1/16W 1/16W 1/10W
82 5% 22 5% 33 (1005X4) 33 (1005X4) 33 (1005X4) 33 (1005X4) 82 5% 12K 0.5% 100 5% 1K 5% 1K 1K 1K 0 0 1M 1K 0 0 0 470 470 680 150 0 75 100K 0.1uF 47K 4.7K 1K 5.6K 4.7K 2.7K 4.7K 2.7K 4.7K 2.7K 5% 5% 5%
5% 5%
1/16W 1/16W
5% 5% 5% 5%
5%
1/16W
0.5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5%
0.5% 0.5% 5%
1/10W 1/16W 16V 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W
5% 5%
1/16W 1/16W
8-25
RD-65
Ref. No. R5817 R5818 R5821 R5822 R5824 R5825 R5826 R5827 R5828 R5829 R5831 R5832 R5833 R5834 R5836 R5837 R5838 R5839 R5842 R5843 R5844 R5845 R5846 R5848 R5852 R5853 R5854 R5855 R5856 R5857 R5859 R5861 R5862 R5863 R5864 R5865 R5867 R5868 R5869 R5870 R6001 Part No. Description 4.7K 4.7K 5% 5% Remarks 1/16W 1/16W 1/16W 1/16W 25V 0 Ref. No. Part No. Description ACCESSORIES *********** 1-480-167-11 REMOTE COMMANDER (RMT-D248P) 1-480-526-11 1-575-131-82 1-696-593-11 1-759-586-41 1-555-074-52 1-827-946-21 1-828-145-11 3-113-760-11 3-113-760-21 (AEP, UK) REMOTE COMMANDER (RMT-D2480) (AUS) CORD, POWER (AEP) CORD, CONNECTION (PAL) CONTROLLER, VIDEO (AV MOUSE) CORD, POWER (AUS) CORD, POWER (UK) CORD, CONNECTION (AV) (AUS) MANUAL, INSTRUCTION (ENGLISH) (UK) MANUAL, INSTRUCTION (FRENCH) (AEP1,AEP3) MANUAL, INSTRUCTION (GERMAN)(AEP1) MANUAL, INSTRUCTION (ITALIAN)(AEP1) MANUAL, INSTRUCTION (SPANISH)(AEP1) MANUAL, INSTRUCTION (DUTCH)(AEP1) MANUAL, INSTRUCTION (DANISH)(AEP2) MANUAL, INSTRUCTION (SWEDISH)(AEP2) MANUAL, INSTRUCTION (FINNISH)(AEP2) MANUAL, INSTRUCTION (DUTCH)(AEP2) MANUAL, INSTRUCTION (ENGLISH)(AUS) Remarks 1-218-961-11 RES-CHIP 1-218-961-11 RES-CHIP 1-218-961-11 1-218-961-11 1-163-038-91 1-234-370-21 1-234-370-21 1-234-370-21 1-234-370-21 1-218-938-11 1-218-990-81 1-164-360-11 1-218-933-11 1-218-933-11 1-218-965-11 1-218-990-81 1-218-935-11 1-218-949-11 1-218-947-11 1-218-947-11 1-218-947-11 1-218-947-11 1-218-961-11 1-218-961-11 1-218-965-11 1-218-965-11 1-218-965-11 1-234-369-21 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-961-11 1-218-951-11 1-218-953-11 1-218-990-81 1-218-950-11 1-218-957-11 1-218-961-11 1-218-970-11 1-218-990-81 RES-CHIP RES-CHIP CERAMIC CHIP RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES-CHIP SHORT CHIP CERAMIC CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES, NETWORK RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP < VIBRATOR > X5101 1-813-049-21 VIBRATOR, CRYSTAL (24.576MHz) X5201 1-795-904-21 OSCILLATOR, CRYSTAL (48MHz) X5502 1-813-052-21 VIBRATOR, CRYSTAL (25MHz) ***********************************************************
4.7K 5% 4.7K 5% 0.1uF 22 (1005X4) 22 (1005X4) 22 (1005X4) 22 (1005X4) 56 5% 0 0.1uF 22 22 10K 0 33 470 330 330 330 330 4.7K 4.7K 10K 10K 10K 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5%
1/16W 16V 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W
0 0
10 (1005X4) 10K 5% 10K 5% 10K 5% 10K 5% 4.7K 680 1K 0 560 2.2K 4.7K 27K 0 5% 5% 5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W
Note :
8-26E
The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.
203
RDR-HXD870/HXD970/HXD1070
Sony Corporation
9-883-952-12
Home Electronics Network Company
204
Reverse
988395212.pdf
Revision History
Ver. 1.0 1.1 Date 2007.05 2007.10 History Official Release Revised-1 Contents Addition of Australian model Change of service note (Page 7 through Page 11) Change of block diagrams Change of schematic diagrams and printed wiring boards Change of service mode (Pages 6-6, 6-9 and 6-10) Change of repair parts list S.M. Rev. issued Yes
RDR-HXD870/HXD970/HXD1070