You are on page 1of 2

Table 1. Status of CETPs Serial Name of State / Nos. UnionTerritory 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.

Andhra Pradesh Delhi Gujarat Haryana Karnataka Madhya Pradesh Maharashtra Punjab Rajasthan Tamil Nadu Uttar Pradesh Total No. of CETPs Installed Capacity(MLD) 3 14 16 1 3 1 10 2 8 27 3 88 12.75 191.6 157.3 1.10 1.3 0.9 71.25 1.535 57.7 71.15 44.4

Source: Ministry of Environment & Forests.

Table 2. Inlet effluent quality standards for CETP under EPA Rules Parameter 1. Ph 2. Temperature in Centigrade 3. Oil & Grease 4. Phenolic Compounds 5. Ammonical Nitrogen (as N) 6. Cyanide (as CN) 7. Hexavalent Chromium 8. Total Chromium 9. Copper 10. Lead 11. Nickel 12. Zinc 13. Arsenic 14. Mercury 15. Cadmium 16. Selenium 17. Fluoride 18. Boron Concentration (in mg/l) 5.5-9.0 45 20 5.0 50 2.0 2.0 2.0 3.0 1.0 3.0 15.0 0.2 0.01 1.0 0.05 15.0 2.0

19. Alpha Emitters Hc/ml 20. Beta Emitters Hc/ml

10-7 10-8

Source: The Gazette of India: Extraordinary-Part II Section 3(I) pp 10, dated 27 Feb 1991.

Table 3. Treated effluent quality standards for CETP under EPA Rules Parameter 1. Ph 2. BOD 20 degree centigrade 3. Oil & Grease 4. Temperature in degree centigrade 5. Suspended Solids 6. Dissolved Solids ( inorganic) 7. Total residual Cl 8. Ammonia (as N) 9. Kjeldahl (as N) 10. COD 11. Arsenic (AS) 12. Mercury (Hg) 13. Lead (Pb) 14. Cadmium (Cd) 15. Chromium (Cg) 16. Copper (Cu) 17. Zinc (Zn) 18. Selenium (Se) 19. Nickel (Ni) 20. Boron (B) 21. Percent sodium 22. Cyanide (CN) 23. Chloride (Cl) 24. Fluoride (F) 25. Sulphate (SO4) 26. Sulphide 27. Pesticides 28. Phenolic Compounds Into inland surface waters 5.5 9.0 30 10 40 100 2100 1.0 50 100 250 0.2 0.01 0.1 1.0 2.0 3.0 5.0 0.05 30 2.0 0.2 1000 2.0 1000 2.8 Absent 1.0

Source: The Gazette of India: Extra-ordinary-Part II-Section 3(I) pp 11 dated Feb. 27, 1991

You might also like