You are on page 1of 1

Alguns Comandos teis

Router#show ip route connected Router(config -router)#network <address><wild-card> Router(config)# ip route <address><netmask><interface or next -hop> Router(config)# router eigrp <Autonomus -System> Router(config)# ip route <address><netmask><interface or next -hop> Router(config -router)#no auto-summary Router(config -if)#bandwidth <valor> Router(config -router)#passive-interface <interface > Router(config -if)#ip summary -address eigrp <autonomous -system-number ><address><netmask> Router(config-router)#redistribute static

You might also like