Concrete anchor blocks shall be provided in order to resist the horizontal force caused by the pipe. Anchor blocks usually have a rectangular plan but for large forces H-shape plans may be used in order to increase the passive earth pressure.
Concrete anchor blocks shall be provided in order to resist the horizontal force caused by the pipe. Anchor blocks usually have a rectangular plan but for large forces H-shape plans may be used in order to increase the passive earth pressure.
Concrete anchor blocks shall be provided in order to resist the horizontal force caused by the pipe. Anchor blocks usually have a rectangular plan but for large forces H-shape plans may be used in order to increase the passive earth pressure.
PEPELINE
CONCRETE ANCHOR BLOCKSECTION
CONTENTS
DESCRIPTION
Introduction
Example - Désign of Rectangular Anchor Biock
Example - Design of H- Shape Anchor Block
PAGEI
Antroduction
a) For underground pipes, at locations where the pipe exits from or enters
to the ground, concrete anchor blocks shall be provided in order to
resist the horizontal foree caused by the pipe.
b) The horizontal force caused by the pipe is resisted by the following:
- Friction force between the concrete block and the ground,
- Passive earth pressure against the concrete block.
¢
Anchor blocks usually have a rectangular plan but for large
forces H-shape plans may be used in oréer to increase the passive
earth pressure.
4) No tension $s allowed when computing the beating pressure
under the block.
e)
The factor of safety against sliding shall not be Jess than 1.26.
§) The factor of safety against overturning shall not be less than 1.50.