You are on page 1of 1

TPF Dumps

DUMP NUMBER CTL-1 CTL-2 CTL-3 CTL-4 CTL-6 CTL-7 CTL-8 CTL-10 CTL-B CTL-C CTL-D CTL-E CTL-F CTL-FFFFC CTL-13 CTL-14 CTL-21 CTL-22 CTL-23 CTL-24 CTL-27 CTL-2D CTL-2E CTL-2F CTL-30 CTL-32 CTL-35 CTL-3F CTL-61 CTL-63 CTL-65 CTL-67 CTL-68 CTL-6A CTL-6B CTL-6C CTL-6D9 CTL-6DA CTL-6DB CTL-D0 CTL-D1 CTL-D2 CTL-E4 CTL-EB DESCRIPTION Program error detected in CP Virtual storage error Protection Exception Addressing Exception Specified level already holding a block No block attached at specified level Holding a record during exit Infinite loop The block type specified in the level is invalid No frames available in the system Defer issued holding a record CRET table is full Double release of file pool address So many chains not released Tape open at exit time Length of the parameter list more than max Record hold table is full Finding data level already holding a data block CBRW not holding a data block Attempt to unhold on a record not being held Core block held at data level at post interrupt Zero file address Record id check failure RCC Check failure Unable to file record to DASD File block and record size disagree Attempt to hold same record more than once Error occurred during FILNC processing No program nested Program not found in the system The file address of this program is incorrect Program retrieval error Program type in PAT is invalid Invalid program name Attempt to enter dummy program Attempt to enter spare program User attempts to release block twice The address in CBRW at the level is invalid The ECB private area is exhausted The level specified is not holding a block No block detached from the level specified If no. of detachments exceed 255 The program file address corrupted Program is not authorised to issue COMMON=YES

You might also like