You are on page 1of 13
TM 683 +(eyetadoaids 60) ‘syusamno yuepusdepuy w0q Jo 10 quaxms perMATEER ow 30 CyyeueWUT OT SFUOTPUT SASZOMMCTTIITE Ons -SeFe3TOA om SETFOr S.ImoNTOR saorsta00x our -%y pus Ty sqour om mT peTTOUCD LenoMUTyUOD 09 UEo JUDE PeSTTTqUIS PeUPATTOP omy THRTaS ONY Jo WTITEOd poy 900s fos ul -uerp 9q uo syynoxTO ony may eePezTOA WWepUsdspUT Ong ade WITS OM $O TI GOTATOCd ox UT sueRE “yTNaTTO CUD mOLS eBe3TOa ow SreATTOp onyssedds om UOFTAS ETH JO IIT pus I worse 70d 91 UL “ade WVIAC’ OM TTA pezeT Oc oq WO HoT comr come AUT POPTATP ST GBeToa CML “A 095 - O JO eBuer om UATE OTT ~Toxyuos *o°p Jo Somos © ST COS ML VISHL STAI POSTTTANIO oul ot spa a hm mw Od (90m 20z woTyoSUT) es $86 ML VISES WATALLOMN GRZTTIAVIS x The apparatus contains two independent stabilized current sources. a the left side of the panel are the control of one rectifier, on the right side are the controls of the other. The ewitch "P* in ‘the middle of the panel 1s comon for both power sources and deter- mines their connection. On the left side of the panel are aloo the mains switch, common for both parts, and pilot lamp indicating whether the apparatus is in operation.” ‘The milliameter on the left has a part of ite scale printed in a bright colour. If the pointer moves to this part of the scale during operation the rage must be changed with the switch Kp, otherwise ‘the delivered current would not be stabilised. The owitch K, has two positions for the selection of the intensity range: 0 - 75 mA and 75 = 150 mA. Under this switch are three binding poste. The two upper ones are marked “+" and "-" (the polarity of the output 4.c.). ‘The third post is connected to the ciiaseis of the apparatus and it must be carthed. The shorting link attached to the third binding post serves for the earthing of any of the output teminele (the "+ or "=" pole of the delivered 4.0.). ‘Te controls on the right side of the penel ere arrenged in a simi- Jar manner. Under the voltmeter which has two ecales (one 0 - 500 ¥, ° the other 0 - 600 ¥), is the range switch K,. The output terminals ere naried 560 V and are fitted with a shorting ling in the same mamer os the terminals on the left side of the epperatus. ‘The stabilised rectifier TM 585 1s one of the TESIA measuring in- struments for laboretory use, Wiich ark, designed as independent pa- nel units suitable for severe] combinations. Together with other “ similar mits this source of power can be fitted into a permanent reck after the removal of the wooden sides. Aocescories ‘Spare fuses and a maine connecter cord aie supplied with each appe-

You might also like