Professional Documents
Culture Documents
AL DOBOWI RUBBER SUPPORT INSERTS are designed for use at the support points of insulated pipes for
preventing the crushing of the insulation.
AL DOBOWI RUBBER SUPPORT INSERTS are made out of high density rubber compounds which have many
advantages over conventional materials such as wood or foamed products ADVANTAGES: High Load bearing capacity, hence no possibility of crushing or crumbling under pipe loads. Resistance to deterioration and distortion with time and exposure to moisture Rubber being an inert material, AL DOBOWI rubber inserts are non-corrosive to metal support Dimensional accuracy is ensured since each size is individually moulded. Rubber inherently offers the property of vibration isolation, which is not available with any other material used. The Tongue and Groove design of AL DOBOWI rubber support inserts saves Time and labour due to convenience of installation MATERIAL PROPERTIES:
P.O. Box 61348 Jebel Ali Free Zone, United Arab Emirates Fax: +9714 8837720 Email:rubber@aldobowi.com Website: www.aldobowi.com
AL DOBOWI
PRODUCT SELECTION:
Product Selection Information Insulation Thickness (RSI Thickness) RSI Width 13mm 19 mm 25 mm 32 mm 38 mm 50 mm 63 mm 75 mm * * * * * * * * * * * * * * * * * * * * * * *
25 mm
* * * * * * * *
* * * * * * * * * *
* * * * * * * * * * * * *
* * * * * * * * * * * * * * * *
* * * * * * * * * * *
* * * * * * * * * * *
38 mm
50 mm
The above sizes are available standards Other sizes can be manufactured to order While ordering, please mention the pipe OD, insulation thickness and width required.
P.O. Box 61348 Jebel Ali Free Zone, United Arab Emirates Fax: +9714 8837720 Email:rubber@aldobowi.com Website: www.aldobowi.com