Professional Documents
Culture Documents
comJ
FT2232h based JTAC oard
Budget: $30-$250 USD
Description
Hi Engineers:
I need someone to design a FT2232H based USB JTAG board.
reIerence design:
http://dangerousprototypes.com/docs/images/c/c4/Busblaster-v2-cctii.png
Pinout must be compatible with the above reIerence design.
Target voltage must be in the range oI 1.5v-5.0v.
The main board has FT2232H and CPLD(or a buIIer chip), which use
channel A oI Ft2232H Ior jtag, and leave channel B as headers, so a daughter
board can be plugged to the main board. The daughter board will use channel
B oI Ft2232H Ior high speed serial communication.
The reason Ior use CPLD as the buIIer is the cost, CPLD can be obtained Ior
$1 but usually a buIIer chip will cost $6. II you can Iind a buIIer chip Ior the
design and cost is $1, then go Ior it.
The CPLD needed to be selI-program, meaning, conIig channel B oI
FT2232H to JTAG and use jumpers to connect to CPLD's jtag port and
program it. Similar to the reIerence design mentioned above.
This project only covers the main board design.
You will need to write the CPLD code (write your own, or use open source
ones)
You also need to write a test program to test all ports are working (without
connecting a target board to veriIy the jtag is working)
The board must be designed in consideration oI a daughter board can be
plugged into.
Since OpenOCD and urJTAG support FT2232H, so you need to make sure
the design works under these soItwares.
Iinally you will need to provide:
1: 4 working prototype PCB boards with all components soldered on the PCB
(not empty PCBs)
2: 6 empty prototype PCBs
3: Schematic and PCB layout Iile in Altium Designer (Protel) Iormat
4: A Windows/Dos test program to test the board without connecting a target
board.
5: Sample code/script to demonstrate the board is working with urJTAG and
OpenOCD.
dditionaI information submitted:
01/12/2011 at 3:13 IST:
Forgot to mention for the CPLD code, if you write you own, then you agree to provide source and it the copyright
belongs to me.
01/12/2011 at 7:24 IST:
Also forgot to mention will pay for the following:
10 PCS prototype PCB boards
all the components needed for 4 complete assembled prototype board.
So the bid is for the design, testing and assembly, pay the cost of prototype pcb and components.
thanks
u||d|ng prototype for e|ectron|c handhe|d c|ean|ng dev|ce
Budget: $1500-$3000 AUD
(Approx. $1478-$2958 USD)
Description
Building prototype for electronic handheld cleaning device for domestic purposes; from scratch
to finish product ready to sell. Rechargeable batteries will be used as a source of energy.
Length of a device in between 15-18 centimeters. Will be used around homes to clean bathroom
walls, sinks and oven tops. Let me know the best price
|ass E PA w|th ca|cu|at|on and s|mu|at|on us|ng A08
Budget: $30-$250 USD
Description
Provide theoretical calculation and to use ADS to design and simulate Class E Power AmpliIier
Design parameters
- 0.18um process technology using MOSFET.
- Vdd 1.8V
- Frequency 5.8GHz
- Bandwidth 200MHz
- Pout 20dBm
- Power EIIiciency 70
- Termination 50 Ohms
0|8 amera hardware 8pec|a||st
Budget: $250-$750 USD
We have urgent need for someone who holds strong expertise in CCD/CMOS Camera Hardware Design as well as
associated P development in VHDL.
Skills required ( Must ) :
- Must have strong experience in CCD/CMOS Camera Hardware Development. Must have experience with different
kinds of image sensor.
- PCB Schematic, BOM, PCB Placement, Layout, Routing etc.
- P development for the given hardware in VHDL
we are looking for someone who can work for us remotely on part-time or contract basis. we are looking for someone
for long term relationship. we have couple of projects available, we will discuss the project details with the selected
person. Please contact us for detail.
would really appreciate if only serious bidders react on this project work. Applicant should be able to sign MNDA and
able to provide References if necessary.
Regards
BalaJi MicroTechnologies Pvt. Ltd.
| need a tes|a co|| to be bu||d!
Budget: $250-$750 USD
I need some one to bulid me a tesla coil, oI small size powerIul enough to illuminate a tubelight..
and i need to c the circuit daigrams, aIter getting satisIied i will give quotation to the person i
choose to work over it..
payment via Escrow or paypal...
CP8|C|onass tracker
Budget: $750-$1500 USD
Design, build and send a small low weight GPS/Glonass tracker and with the following specs:
Electronics:
- Selectionable acquisition frequency from 0,2 to 10 Hz.
- High accuracy GPS chip (Glonass satellites acquisition available)
- 1h integrated battery duration
- Quick battery change available
- Parameters to be recorded for each position (latitude, longitude, high, UTC time)
- SD memory slot recording (up to 100k positions)
- ntegrated antenna
Assembly:
- Waterproof assembly
- Tracker weight (ready to work) is the most important target.
The project will include a report with:
- Complete Bill of materials
- Electronic diagram drawings
- Program code (in case of necessary)
home Energy eter
Budget: $30-$250 USD
I am developing a home smart energy meter and need to direct all MCU programming to
Ireelancers. I am developing the Iunctions and surrounding circuits but do not have
time to devote to the Microcontroller programs. Will be using Freescale 8-bit mcu's and cirrus
logic ADC's. C programming is a must.
P Layout (ngo|ng work}
Budget: $1500-$3000 USD
Our company is a designer and manuIacturer oI PDA handheld computing solutions and
continually looks Ior development opportunities in niche industrial and enterprise market
applications.
We require a proIessional contractor skilled in PCB Layout using either Allegro or Altium. We
have a couple oI layout projects which we require immediate assistance with and we have a
number oI new projects which will be started in the new year.
The person we are looking Ior will have the Iollowing;
1/ 2-3 years minimum oI PCB layout experience
2/ Must have own license oI either Allegro or Altium
3/ Must be able to start work immediately
4/ Excellent communication and able to Iollow all written instructions to the letter
II you meet the requirements above, please let us know the know the Iollowing in the Private
Message area;
a/ Which version oI Allegro/Altium you have
b/ Your hourly rate
c/ A portIolio/examples oI PCB layout work you have completed
CP8|C|onass tracker
Budget: $750-$1500 USD
Design, build and send a small low weight GPS/Glonass tracker and with the following specs:
Electronics:
- Selectionable acquisition frequency from 0,2 to 10 Hz.
- High accuracy GPS chip (Glonass satellites acquisition available)
- 1h integrated battery duration
- Quick battery change available
- Parameters to be recorded for each position (latitude, longitude, high, UTC time)
- SD memory slot recording (up to 100k positions)
- ntegrated antenna
Assembly:
- Waterproof assembly
- Tracker weight (ready to work) is the most important target.
The project will include a report with:
- Complete Bill of materials
- Electronic diagram drawings
- Program code (in case of necessary)