Professional Documents
Culture Documents
Page 1 of 1
Print Article
Description
Configuring Software Switch on the FortiGate unit.
Scope
Software Switch is used to form a simple bridge between two or more physical or wireless FortiGate interfaces. They are made up of "member" interfaces. There are some limitations; soft switch interfaces cannot be monitored by HA or used as HA heartbeat interfaces.
Solution
To add interfaces to a software switch group, no configuration settings can refer to those interfaces. This includes default routes, VLANs, inter VDOM links, and policies. Assumptions: The Software Switch Interface is to be named soft_switch. Its members are port1, external and DMZ. The CLI commands to configure a software switch interface called soft_switch with port1, external and DMZ interfaces are: config system switch-interface edit soft_switch set members port1 external dmz end For more information, see "config system switch-interface" in the FortiGate CLI Reference Guide (which can be obtained from http://docs.fortinet.com).
Last Modified Date: 02-15-2010 Document ID: FD31769
http://kb.fortinet.com/kb/viewContent.do?externalId=FD31769&sliceId=1
20.1.2011.