Professional Documents
Culture Documents
ME3303 Assignment 1
ME3303 Assignment 1
M = 5kNm
Question 1 A cast-iron machine part is acted upon by a 5 kN-m couple as shown in figure 1. Knowing E = 200 GPa and neglecting the effects of fillets, Determine (a) the maximum tensile and compressive stresses, (b) the radius of curvature. (16 marks) (4 marks)
25mm
Figure 1 Question 2 A bar is made from bonded pieces of steel and PVC as shown in figure 2. The elastic modulus of steel and PVC are 220 GPa and 60 GPa respectively. A moment of 10 kNm is applied. Determine (a) the maximum stress in the steel. (b) the maximum stress in the PVC. (10 marks) (10 marks)
110mm
PVC
Steel
PVC
12mm
40mm Figure 2
12mm
Page 1 of 2
90 kN
25 kN
25mm 25mm
A 2m
B 4m
C 5m Figure 3
D 1m
Figure 3 shows the beam ABCDE. Determine (a) Draw the shear force diagram. (b) Draw the bending moment diagram (c) Determine the maximum normal stress due to bending. (10 marks) (10 marks) (10 marks)
Question 4
5 kN
35 kN/m
5mm 15mm
A 4.5m
B 3.5m Figure 4
C 3m
Figure 4 shows the beam ABCD (a) Draw the shear force diagram. (b) Draw the bending moment diagram. - END (15 marks) (15 marks)