Professional Documents
Culture Documents
RECOMMENDED USE
TECHNICAL DATA
COLOURS FINISH VOLUME SOLIDS SPECIFIC GRAVITY KG/L THEORETICAL SPREADING RATE RECOMMENDED (DFT) - MICRONS RECOMMENDED (WFT) - MICRONS DRYING TIME @ 30C White, Grey (other colour on request) Matt 52 2% 1.50 0.05 17 - 13 M2/LTR 30 - 40 per coat 60 - 75 per coat Temperature, humidity, air movement, film thickness and number of coats all affect the drying time. Touch dry (hours) Dry to recoat (hours) Hard dry (hours) : 2-3 : 12 : 24
APPLICATION DATA
APPLICATION METHOD THINNING (VOLUME) THINNER / CLEANER AIRLESS SPRAY REQUIREMENTS CONV. SPRAY REQUIREMENTS MIXING RATIO (VOLUME) POT LIFE @ 30C RECOMMENDED SYSTEM Brush, Roller or Spray 5 - 15% depending on the method of application National G.P. Thinner Pressure / Tip Size : 2200 psi / 0.015 - 0.020 Atomizing Pressure : 50 psi Base : Hardener NA NA - National Red Oxide Primer - National Synthetic Undercoat - National Synthetic Enamel Gloss I or Gloss II : 1 coat : 1 coat : 1 - 2 coats
MISCELLANEOUS DATA
FLASH POINT SHELF LIFE @ 30C 38C 18 months in original sealed containers, with proper storage conditions.
NOTE : We warranty only the quality of our product and this data sheet is based on results obtained from experience and tests. We reserve the right to change data without prior notice. For surface preparation, safety details, refer specifier and safety data.