Professional Documents
Culture Documents
Ser Vice Manual: Color Television Chassis No. SN-010
Ser Vice Manual: Color Television Chassis No. SN-010
COLOR TELEVISION
POWER
VOL
CH
VIDEO IN AUDIO
MENU
MODEL
20MR10
In the interests of user-safety (Required by safety regulationsin some countries) the set should be restored to its original condition and only parts identical to those specified should be used.
Page ELECTRICAL SPECIFICA TIONS ......................................................................................................... 1 IMPORTANT SER VICE SAFETY PRECAUTION ................................................................................. 2 LOCATION OF USER'S CONTROL ..................................................................................................... 4 INSTALLATION AND SER VICE INSTRUCTIONS ................................................................................ 5 CHASSIS LAYOUT ............................................................................................................................. 11 BLOCK DIAGRAM .............................................................................................................................. 12 SCHEMATIC DIAGRAMS ................................................................................................................... 13 PRINTED WIRING BOARD ASSEMBLIES ........................................................................................ 20 REPLACEMENT PARTS LIST ............................................................................................................ 23 PACKING OF THE SET ...................................................................................................................... 29
CONTENTS
This documenthas been published to be used for after sales service only. 1 The contents are subject to change without notice.
20MR10
4A 125V
SER VICING OF HIGH VOLTAGE SYSTEM AND PICTURE TUBE When servicing the high voltage system, remove the static charge by connecting a 10k ohm resistor in series with an insulated wire (such as a test probe) between the picture tube ground and the anode lead. (AC line cord should be disconnected from AC outlet.)
1. Picture tube in this receiver employs integral implosion protection. 2. Replace with tube of the same type number for continued safety . 3. Do not lift picture tube by the neck. 4. Handle the picture tube only when wearing shatterproof goggles and after discharging the high voltage anode completely.
20MR10
Connect the resistor connection to all exposed metal parts having a return to the chassis (antenna, metal cabinet, screw heads, knobs and control shafts, escutcheon and etc.) and measure the AC voltage drop across the resistor. AII checks must be repeated with the AC line cord plug connection reversed. (If necessary, a nonpolarized adapter plug must be used only for the purpose of completing these check.) Any current measured must not exceed 0.5 milliamp. Any measurements not within the limits outlined above indicate of a potential shock hazard and corrective action must be taken before returning the instrument to the customer.
SAFETY NOTICE
Many electrical and mechanical parts in television recevers have special safety-related characteristics. These characteristics are often not evident from visual inspection, nor can protection afforded by them be necessarily increased by using replacement components rated for higher voltage, wattage and etc. Replacement parts which have these special safety characteristics are identified in this manual; electrical components having such features are identified by " ! " and shaded areas in the Replacement Parts Lists and Schematic Diagrams. For continued protection, replacement parts must be identical to those used in the original circuit. The use of substitute replacement parts which do not have the same safety characteristics as the factory recommended replacement parts shown in this service manual, may create shock, fire, X-radiation or other hazards.
20MR10
POWER
VOL
CH
V IDEO IN AUDIO
MENU
MENU
Off.
CHANNEL UP/DOWN ( ) Selects next higher channel. ( ) Selects next lower channel. Press both at the same time to access the MAIN MENU screen.
Off.
REMOTE KEYPAD Accesses any channel from keypad. FLASHBACK Returns to previous channel. VOLUME UP/DOWN (+) Increases sound. () Decreases sound. In menu mode, changes or selects the TV adjustments. MUTE Press Mutes sound. Press again Restores sound. CLOSED CAPTION appears when sound is muted.
MENU Press Accesses MAIN MENU. Press again Exits MAIN MENU. DISPLAY Press Displays receiving channel for four seconds. Press again Removes display. Temporarily displays receiving channel when in Closed Caption mode.
G1339SB
TV
20MR10
CIRCUIT PROTECTION
The receiver is protected by a 4.0A fuse (F701), mounted on PWB-A, wired into one side of the AC line input.
20MR10
For adjustments of this model, the bus data is converted to various analog signals by the D/A converter circuit. Note: There are still a few analog adjustments in this series such as focus and master screen voltage. Follow the steps below whenever the service adjusment is required.
To enter the service mode and exit service mode. While pressing the Vol-up and Ch-up buttons at the sametime, plug the AC cord into a wall socket. Now the TV set is switched on and enters the service mode. , To exit the service mode, turn the television off by pressing the power button.
1. Service mode.
Before putting unit into the service mode, check that customer adjustments are in the normal mode. Use the reset function in the video adjustment menu to ensure customer control are in their proper (reset) position.
DEF,
RETURN Window 4 : FIX VALUE F01 F13 RETURN F02 NEXT F14 NEXT
FIX VALUE
F15
F16
F25 PREVIOUS
F26
RETURN PREVIOUS
Press CH UP/DOWN buttonfor selection and enter by VOL UP or VOL DOWN. Press CH UP/DOWN button to select the adjustment item and VOL UP/DOWN to adjust the data number for each categories. (OSD disturbance can be erased by R/C display key) (Note: EEPROM factory used only)
20MR10
Below are the adjustments ranges and initial values for FIX VALUE category.
FIX VALUE
SER VICE POSITION F01 F02 F03 F04 F05 F06 F07 F08 F09 F10 F11 F12 F13 F14 F15 F16 F17 F18 F19 F20 F21 F22 F23 F24 F25 F26 ADJUST ITEM OPTION 1 OPTION 2 E-SAVE TUNER SETUP R-TONE RD R-TONE BD B-TONE RD B-TONE BD FM LEVEL AFC GAIN G DRIVE FBT BLK SW V COMP OSD CONT SHARPNESS FLT SYS KILLER OP Y PRI CORING DC REST BS START BS GAIN ABL START R/B ANGLE H BLK R H BLK L DATA
RANGE INITIAL VALUE (Hex)
00-FF 00-FF 00-3F 00, 01 00-7F 00-7F 00-7F 00-7F 00-1F 00, 01 00, 0F 00, 01 00-07 00-07 00-3F 00-03 00-07 00-03 00-07 00-03 00-03 00-03 00-07 00-0F 00-07 00-07
B0 04 23 00 19 00 00 12 0C 00 0F 01 07 02 19 00 04 00 04 02 01 01 00 08 04 04
A0 0C 2A 00 03 7C 00 04 0C 00 0F 01 07 01 19 00 02 00 04 02 01 01 00 08 03 00
Table - A Below are the ranges and initial values for each adjustment and in each categories.
DEF
SER VICE POSITION D01 D02 D03 D04 D05 D06 ADJUST ITEM H-PHASE V-SIZE V-POSITION CC-POSITION V-LINEARITY V-S-CORRECTION DATA
RANGE INITIAL VALUE
ADJUSTMENT CONTENTS
0C 40 20 1A 10 10
Table - B
SIGNAL
SER VICE POSITION S01 S02 S03 S04 S05 S06 S07 S08 S09 S10 S11 S12 S13 ADJUST ITEM RF AGC VIDEO LEVEL Y-MUTE SUB BIAS R-BIAS G-BIAS B-BIAS R-DRIVE B-DRIVE CONTRAST TINT COLOR BRIGHTNESS DATA
RANGE INITIAL VALUE
ADJUSTMENT CONTENTS
00-3F 00-07 00-03 00-FF 00-FF 00-FF 00-FF 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F
Table - C
20MR10
Holding down both the Vol-up/Ch-down buttons on the TV set at service mode for more than 2 seconds will automatically write the above initial values into IC2102 (IC2101).
ADJUSTMENT PART REPLACED IC2001 IC201 NECESSAR Y UNNECESSAR Y NOTES Data is stored in IC2102 (IC2101). The adjustmentis needed to compensate for characteristics of parts includingIC201. Holding down both the Vol-up/Ch-down buttons on the TV set in the service mode for more than 2 seconds will automatically write the above initial values into IC2102 (IC2101). Adjust items related to picture tube only .
X X
IC2102 (IC2101)
CR T
Table - D
R2102
R2103
R2104
Table - E
20MR10
Sub-Picture Adjustment
1. Receive a good local channel. 2. Make sure the customer picture control is set to maximum. 3. Enter the service mode and select the service adjustment "S10". 4. Adjust the data value to achieve normal contrast range.
Screen Adjustment
1. Connect to oscilloscope probe between TP855 and ground of the CR T unit. 2. Receive a good local channel. 3. Enter the service mode Signal category and set the service adjustment "S04" to step 30. Then select the service adjustment "S12" and set the data value to "00" to set the color level to the minimum level. (record the originaldata first). You may skip this step, if you selected a B/W picture or monoscope pattern. Set also the "S05/S06/S07" data to minimum level. 4. Select the service adjustment"S03" and set the data value to "01" to turn off the luminance signal (Y-mute). 5. Select the service adjustment "S13" and adjust the data value to obtain2.35 volts as shownin Figure B. 6. Adjust the master screen control until the raster darkens to the point where raster is barely seen. 7. Adjust the service adjustment "S05" red, "S06" green and "S07" blue to obtain a good grey scale with normal white at low brightness level. 8. Select the service a adjustment "S03" and reset data to "00". Select the service adjustment "S12" and reset data to obtain normal color level. 9. Remove probe and reset the master screen control to obtain normal brightness range.
Sub-Tint Adjustment
1. Receive a good local channel. 2. Set the customer tint control to the center of its range. 3. Enter the service mode and select the service adjustment "S11". 4. Adjust "S11" data value to obtain normal fresh tones.
Sub-Color Adjustment
1. Receive a good local channel. 2. Make sure the customer color control is set to center position. 3. Enter the service mode and select the service adjustment "S12". 4. Adjust "S12" data value to obtain normal color level.
Adjustment Sub-Brightness
1. Receive a good local channel. 2. Make sure the customer brightness control is set to center position. 3. Enter the service mode and select the service adjustment "S13". 4. Adjust "S13" data value to obtain normal brightness level.
2.35 Vdc
GND
20MR10
Vertical-Phase Adjustment
1. Receive a good local channel. 2. Enter the service mode DEF category and select the adjustment "D03". 3. Adjust "D03" bus data to get the most acceptable vertical position. Note: The step range is 20 (032) 10 steps.
Figure C.
10
20MR10
CHASSIS LAYOUT
H
11
20MR10
BLOCK DIAGRAM
H
12
20MR10
This circuit diagram is a standard one, printed circuits may be subject to change for product improvement without prior notice.
WAVEFORMS
1.0 1.0 0.9 5.0 5.0 2.1 1.0
1.2
25
47
4.6
0.7
33
39.0
1160
220
150
133
220
1.7
0.7
1.4
105
95
105
13
20MR10
10
11
12
14
15
20MR10
16
20MR10
17
20MR10
18
20MR10
19
20MR10
Ref. No.
Part No.
Description
Code
Ref. No.
Part No.
Description
Code
PARTS LIST
PARTS REPLACEMENT
Replacement parts which have these special safety characteristics identified in this manual; electrical components having such features are identified by ! and shaded areas in the Replacement Parts Lists and Schematic Diagrams. The use of a substitute replacement part which dose no have the same safety characteristic as the factory recommended replacement parts shown in this service manual may create shock, fire or other hazards.
INTEGRATED CIRCUITS
!
J LA76843
AT
Contact your nearest SHARP Parts Distributor to order. For location of SHARP Parts Distributor, Please call TollFree; 1-800-BE-SHARP MARK : SPARE PARTS-DELIVERY SECTION MARK : X- RAY RELATED PARTS
COMBINATION RH-iX3354CEZZ RH-iX3354CEN1 VCKYCY1HB102K(1000p) VCCCCY1HH470J(47p) VCCCCY1HH220J(22p) VCCCCY1HH470J(47p) VCCCCY1HH220J(22p) VCEA0A1CW106M(10(16V)) VRS-CY1JF123J(12k) VRS-CY1JF000J(0) VRS-CY1JF332J(3.3k) VRS-CY1JF152J(1.5k) VRS-CY1JF152J(1.5k) VRS-CY1JF222J(2.2K)
! ! !
Ref. No.
Part No.
Description
Code
PICTURE TUBE
VHiAN7511//-1 J AN7511 VHiLA7840//-1 J LA7840 VHiTEA1507/-1 J TEA1507P/N1 RH-FX0034CEZZ J PC817 VHiKA7805AP-1 J KA7805API or VHiTA7805S/-1 IC2001 RH-iX3492CEZZQ X TMPA8700CPF IC2040 VHiPST994C/-1 J PST994C IC2102 VHiBR2416E2-1 J BR2416E2 or VHiM24C16B/-1 J M24C16B (IC2101)
AK AR AL AE AE AT AD AK AG
! ! !
V101 VB48KRD89X/3E DY601 RCiLH0100MEZZ L703 RCiLG0108GJZZ or RCiLG0014MEZZ or RCiLG0099PEZZ LHLDW0102GJKZ LHLDW1007MEKZ PMAGF3046CEZZ QEARC2016PEZZ
BY AY AQ
TRANSISTORS
Q101 Q201 Q451 Q452 Q601 Q602 Q631 Q701 VS2SC945AQ/-1 or VS2SC3198Y/-1 VS2SC2735//1E VS2SA1530R/-1 VS2SA1266-Y-1 VS2SC2482//-1 VS2SD2586//1E VS2SC945AQ/-1 or VS2SC3198Y/-1 VSSPP04N60C-1 or VSSPP07N60C-1 or VS2SK2708//1E or VS2SK2645++-1 or VSSTP6NC60+-1 or VSSTP6NC60F-1 J 2SC945AQ J J J J J J 2SC2735 2SA1530AR 2SA1266-Y 2SC2482 2SD2586 2SC945AQ AB AC AB AA AD AM AB AH
X X R J
AC AD AF AG
J FET
20
20MR10
Ref. No.
Part No.
Description
Code
Description
Code AB AA AC AC AE
AB
! !
AB AB AB AB
VHD1SS119//-1 or RH-DX0475CEZZ D751 RH-EX0611GEZZ D753 RH-DX0441CEZZ or RH-DX0110CEZZ D758 RH-DX0131CEZZ VA701 RH-VX0048CEZZ or RH-VX0019CEZZ
PACKAGED CIRCUIT
!
AF AL
DIODES
D52 D101 D352 D353 D453 D455 D456 D457 D458 D459 D502 D511 D632 D641 D651 D653 D661 D701 D702 D703 D704 D707 D708 D709 D712 RH-EX0676GEZZ RH-EX0616GEZZ VHD1SS119//-1 or RH-DX0475CEZZ RH-EX0644GEZZ RH-EX0616GEZZ VHD1SS119//-1 or RH-DX0475CEZZ VHD1SS119//-1 or RH-DX0475CEZZ RH-EX0644GEZZ RH-EX0644GEZZ VHD1SS119//-1 or RH-DX0475CEZZ RH-DX0131CEZZ RH-DX0441CEZZ RH-EX0630GEZZ RH-EX0630GEZZ VHD1SS244//-1 RH-EX0667GEZZ RH-DX0468CEZZ or RH-DX0302CEZZ RH-DX0490CEZZ or RH-DX0154CEZZ RH-DX0490CEZZ or RH-DX0154CEZZ RH-DX0490CEZZ or RH-DX0154CEZZ RH-DX0490CEZZ or RH-DX0154CEZZ RH-DX0475CEZZ or VHD1SS244//-1 RH-DX0475CEZZ or VHD1SS244//-1 RH-DX0229CEZZ RH-DX0487CEZZ or RH-DX0302CEZZ or RH-DX0468CEZZ or VHDD1NS4///-1 RH-EX0616GEZZ RH-DX0131CEZZ J Zener Diode, 32V J Zener Diode, 5.6V J Diode J Zener Diode, 13V J Zener Diode, 5.1V J Diode J Diode J Zener Diode, 13V J Zener Diode, 13V J Diode J J J J J J J Diode Diode Zener Diode, 9.1V Zener Diode, 9.1V Diode Zener Diode, 27V Diode AA AA AB AB AA AB
!
AB
!
AB AB AB
!
TRANSFORMERS
AC AC AA AA AB AA AE AC AC AC AC AB AB AF AC T601 T602 T702 RTRNZ0731CEZZ J Transformer or RTRNZ0026PEZZ RTRNF0213PEZZ J H-Volt Transformer RTRNW0003PEZZ J Transformer or RTRNW0009PEZZ AG AY AM
! !
! ! !
CONTROL
J Diode J Diode J Diode J Diode J Diode J Diode J Diode J Diode R738 RVR-M4588CEZZ or RVR-M4336CEZZ X 22k(B) Variable Resistor AF
CAPACITORS
[EL. Electrolytic, M-Poly.. Metalized Polypro Film] C51 VCEA0A1AW337M X 330 10V EL. AE C53 VCEA0A1HW105M J 1.0 50V EL. AB C54 VCEA0A1HW475M J 4.7 50V EL. AB C101 VCEA0A1CW476M J 47 16V EL. AB C201 VCKYCY1HF103Z J 0.01 50V Ceramic AA C202 VCKYCY1HF103Z J 0.01 50V Ceramic AA C203 VCKYCY1HF103Z J 0.01 50V Ceramic AA C204 VCQYTA1HM223K J 0.022 50V Mylar AB C205 VCKYPA1HB103K J 0.01 50V Ceramic AA C206 VCKYCY1HB102K J 1000p 50V Ceramic AA C207 VCEA0A1CW476M J 47 16V EL. AB C208 VCKYCY1HF103Z J 0.01 50V Ceramic AA C209 VCEA0A1HW105M J 1.0 50V EL. AB C210 VCEA0A1HW474M J 0.47 50V EL. AB C211 VCKYCY1HB102K J 1000p 50V Ceramic AA (IC201:iX3354CEZZ) C212 VCEA0A1HW474M J 0.47 50V EL. AB C220 VCKYCY1CB104K J 0.1 16V Ceramic AB C301 VCCCCY1HH470J J 47p 50V Ceramic AA (IC201:iX3354CEZZ) C301 VCCCCY1HH220J J 22p 50V Ceramic AA (IC201:iX3354CEN1) C302 VCKYCY1HB102K J 1000p 50V Ceramic AA
! !
D717 D725
AA AC
21
20MR10
Ref. No.
Part No.
Description
Code
Ref. No. C726 C727 C730 C731 C732 C735 C737 C738 C739 C740 C743 C750 C752 C753 C754 C758 C759 C760 C771 C772 C783 C801 C802 C807 C808 C811 C812 C901 C905 C2001 C2002 C2040 C2041 C2060 C2061 C2062 C2201 C2202 C2601 C2602
Part No. RC-KZ0338CEZZ VCKYPA2HB472K VCEA0A1CW108M VCEA0A1EW107M VCKYPA1HF103Z VCCCPA1HH680J VCEA0A1EW226M RC-KZ0040CEZZ or RC-KZ0340CEZZ VCEA0A1HW104M VCEA0A1EW476M RC-KZ0338CEZZ VCKYPA1HF103Z VCEA0A1CW476M RC-KZ0338CEZZ VCEA0A1CW476M VCEA0A2EW106M VCKYPA2HB102K VCEA0A1CW108M VCEA0A1CW476M VCEA0A1CW476M VCQYTA1HM103K VCCCCY1HH180J VCEA0A1CW106M VCKYCY1EF104Z VCEA0A1CW106M VCKYCY1CB473K VCEA0A1HW474M VCEA0A1HW105M VCEA0A1HW106M VCCCCY1HH101J VCCCCY1HH101J VCEA0A1AW107M VCEA0A1HW105M VCKYCY1CB104K VCKYCY1HB222K VCEA0A1AW107M VCKYCY1HB682K VCCCCY1HH560J VCEA0A1HW475M VCCCCY1HH101J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J 560p 4700p 1000 100 0.01 68p 22 820p
Description 2kV 500V 16V 25V 50V 50V 25V 2kV Ceramic Ceramic EL. EL. Ceramic Ceramic EL. Ceramic
Code AD AB AD AC AA AA AB AD AB AB AD AA AB AD AB AD AA AD AB AB AB AA AB AA AB AA AB AB AB AA AA AB AB AB AA AB AA AA AB AA
! ! !
AA AA AA AB AB AA AB AB AC AA AC AA AB AB AA AB AB AB AB AB AA AB AF AC AD AB AA AB AB AB AB AA AA AF AE AE AA AB AA AB AB AB AA AC AC
0.1 50V EL. 47 25V EL. 560p 2kV Ceramic 0.01 50V Ceramic 47 16V EL. 560p 2kV Ceramic 47 16V EL. 10 250V EL. 1000p 500V Ceramic 1000 16V EL. 47 16V EL. 47 16V EL. 0.01 50V Mylar 18p 50V Ceramic 10 16V EL. (IC201:iX3354CEN1) 0.1 25V Ceramic 10 16V EL. 0.047 16V Ceramic 0.47 50V EL. 1.0 50V EL. 10 50V EL. 100p 50V Ceramic 100p 50V Ceramic 100 10V EL. 1.0 50V EL. 0.1 16V Ceramic 2200p 50V Ceramic 100 10V EL. 6800p 50V Ceramic 56p 50V Ceramic 4.7 50V EL. 100p 50V Ceramic
RESISTORS
RJ2 RJ7 RJ8 RJ9 RJ10 RJ12 RJ18 RJ19 RJ20 RJ21 R53 R54 R55 R56 R57 R101 R201 R202 R203 R204 R205 R206 R207 R208 R209 R209 R210
AC AC AK
220 200V EL. J 0.0033 AC250V Ceramic J 4700p 500V Ceramic J 33 160V EL. J 100 160V EL.
AC AB AG AG
! !
[M-Ox. Metal Oxide, M-Film Metal Film] VRS-CY1JF000J J 0 1/16W M-Ox. VRS-CY1JF000J J 0 1/16W M-Ox. VRS-CY1JF000J J 0 1/16W M-Ox. VRS-CY1JF000J J 0 1/16W M-Ox. VRS-CY1JF000J J 0 1/16W M-Ox. VRS-CY1JF000J J 0 1/16W M-Ox. VRS-CY1JF000J J 0 1/16W M-Ox. VRS-CY1JF000J J 0 1/16W M-Ox. VRS-CY1JF000J J 0 1/16W M-Ox. VRS-CY1JF000J J 0 1/16W M-Ox. VRS-RG3LB223J X 22k 3W M-Ox. VRS-CY1JF101J J 100 1/16W M-Ox. VRS-CY1JF101J J 100 1/16W M-Ox. VRS-CY1JF823J J 82k 1/16W M-Ox. VRD-RA2BE563J J 56k 1/8W Carbon VRD-RA2BE152J J 1.5k 1/8W Carbon VRS-CY1JF221J J 220 1/16W M-Ox. VRS-CY1JF122J J 1.2k 1/16W M-Ox. VRS-CY1JF682J J 6.8k 1/16W M-Ox. VRS-CY1JF270J J 27 1/16W M-Ox. VRD-RA2BE680J J 68 1/8W Carbon VRD-RA2EE151J J 150 1/4W Carbon VRD-RA2BE123J J 12k 1/8W Carbon VRS-CY1JF332J J 3.3k 1/16W M-Ox. VRS-CY1JF123J J 12k 1/16W M-Ox. (IC201:iX3354CEZZ) VRS-CY1JF000J J 0 1/16W M-Ox. (IC201:iX3354CEN1) VRS-CY1JF104J J 100k 1/16W M-Ox.
AA AA AA AA AA AA AA AA AA AA AF AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA
22
20MR10
Ref. No.
Part No.
Description
Code
Ref. No.
! ! ! !
Part No. VRD-RA2BE154J VRS-CY1JF103J VRN-RL3AB1R0J VRN-RL3ABR47J VRD-RA2BE102G RR-DZ0049CEZZ VRW-KP3HC1R8K VRN-RL3ABR39J VRN-RL3ABR39J VRD-RM2HD270J VRS-CY1JF102J VRS-RG2HC102J VRS-CY1JF334J VRD-RA2BE100J VRS-RG2HC122J VRD-RA2BE150J VRS-RG3AB121J VRD-RM2HD124J VRS-CY1JF000J VRS-RG2HC821J VRD-RA2EE394J VRD-RM2HD184J VRD-RM2HD332J VRD-RM2HD470J VRN-RA2BK682F VRD-RA2BE821J VRD-RA2BE562J VRD-RM2HD151J VRS-RG2HC100J VRS-RG3LB270J VRS-VU3LE680J or VRS-VV3LB680J VRD-RM2HD470J VRS-CY1JF272J VRS-CY1JF272J VRS-CY1JF223J VRS-CY1JF223J VRD-RA2BE101J VRS-CY1JF750J VRS-CY1JF102J VRS-CY1JF104J VRS-CY1JF101J VRS-CY1JF101J VRS-CY1JF102J VRS-CY1JF103J VRS-CY1JF103J VRS-CY1JF472J VRS-CY1JF102J VRS-CY1JF102J VRS-CY1JF103J VRS-CY1JF223J VRS-CY1JF103J VRS-CY1JF223J VRS-CY1JF333J VRD-RA2BE223J VRD-RA2BE682J VRD-RA2BE682J VRD-RA2BE682J VRD-RA2BE682J VRS-CY1JF102J VRS-CY1JF103J VRD-RA2BE471J VRS-CY1JF684J VRS-CY1JF684J VRS-CY1JF102J VRS-CY1JF333J VRD-RA2BE101J VRD-RA2BE101J J J X X J J J X X J J J J J X J X J J X J J J J J J J J X X J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J 150k 10k 1.0 0.47 1.0k 3.9 1.8 0.39 0.39 27 1.0k 1.0k 330k 10 1.2k 15 120 120k 0 820 390k 180k 3.3k 47 6.8k 820 5.6k 150 10 27 68 47 2.7k 2.7k 22k 22k 100 75 1.0k 100k 100 100 1.0k 10k 10k 4.7k 1.0k 1.0k 10k 22k 10k 22k 33k 22k 6.8k 6.8k 6.8k 6.8k 1.0k 10k 470 680k 680k 1.0k 33k 100 100
Description 1/8W 1/16W 1W 1W 1/8W 1/2W 5W 1W 1W 1/2W 1/16W 1/2W 1/16W 1/8W 1/2W 1/8W 1W 1/2W 1/16W 1/2W 1/4W 1/2W 1/2W 1/2W 1/8W 1/8W 1/8W 1/2W 1/2W 3W 3W 1/2W 1/16W 1/16W 1/16W 1/16W 1/8W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/8W 1/8W 1/8W 1/8W 1/8W 1/16W 1/16W 1/8W 1/16W 1/16W 1/16W 1/16W 1/8W 1/8W Carbon M-Ox. M-Film M-Film Carbon Carbon Cement M-Film M-Film Carbon M-Ox. M-Ox. M-Ox. Carbon M-Ox. Carbon M-Ox. Carbon M-Ox. M-Ox. Carbon Carbon Carbon Carbon M-Film Carbon Carbon Carbon M-Ox. M-Ox. M-Ox. Carbon M-Ox. M-Ox. M-Ox. M-Ox. Carbon M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. Carbon Carbon Carbon Carbon Carbon M-Ox. M-Ox. Carbon M-Ox. M-Ox. M-Ox. M-Ox. Carbon Carbon
Code AA AA AE AE AB AB AC AE AE AA AA AA AA AA AE AA AE AA AA AE AA AA AA AA AA AA AA AA AE AF AC AA AA AA AA AA AB AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AB AB
! ! !
! ! !
R654 R655 R659 R661 R662 R702 R703 R705 R706 R707 R708 R710 R711 R712 R713 R715 R716 R721 R723 R725 R733 R736 R739 R740 R741 R751 R752 R755 R758 R773 R774 R801 R807 R808 R809 R810 R901 R902 R906 R925 R961 R962 R2001 R2002 R2006 R2008 R2009 R2010 R2012 R2016 R2018 R2020 R2022 R2023 R2024 R2025 R2026 R2027 R2028 R2029 R2032 R2033 R2034 R2040 R2041 R2042 R2043
! ! ! !
! ! !
23
20MR10
Ref. No.
Part No.
Description
Code
Ref. No.
Part No.
Description
Code AC AC AD AD AB AB AC AB AC AB AB AH AB AB AB AB AB AB AB AB AB AD AE AD AA
R2102 VRS-CY1JF101J R2103 VRD-RA2BE101J R2104 VRD-RA2BE101J R2201 R2202 R2203 R2211 R2212 R2213 R2401 R2402 R2403 R2404 R2501 R2503 R2504 R2505 R2506 R2507 R2508 R2509 R2601 VRD-RA2BE103J VRD-RA2BE473J VRS-CY1JF332J VRD-RA2BE222J VRS-CY1JF682J VRD-RA2BE223J VRS-CY1JF101J VRS-CY1JF101J VRS-CY1JF101J VRS-CY1JF101J VRS-CY1JF123J VRS-CY1JF273J VRS-CY1JF123J VRS-CY1JF563J VRS-CY1JF563J VRS-CY1JF823J VRS-CY1JF153J VRS-CY1JF272J VRD-RA2BE331J
FH701 QFSHD1013CEZZ J Fuse Holder FH702 QFSHD1014CEZZ J Fuse Holder J903 QJAKE0205CE09 J Jack, Audio-In or QJAKE0159CEZZ J905 QJAKE0205CE04 J Jack, Video-In or QJAKE0158CEZZ P302 QPLGN0261CEZZ J Plug, 2-pin(S) P401 QPLGN0561CEZZ J Plug, 5-pin(GBN) P601 QPLGN0660CEZZ J Plug, 6-pin(K) P651 QPLGN0361CEZZ J Plug, 3-pin(TP651-3) P701 QPLGN0260CEZZ J Plug, 2-pin(M) P751 QPLGN0461CEZZ J Plug, 4-pin(YBN) P2001 QPLGN0561CEZZ J Plug, 5-pin(TP2001-5) RMC2601 RRMCU0252CEZZ X R/C Receiver or RRMCU0232CEZZ HM602 LX-GZ3001PEZZ J Screw HM604 LX-GZ3001PEZZ J Screw HM612 LX-GZ3001PEZZ J Screw HM613 LX-GZ3002PEZZ J Screw HM614 LX-GZ3002PEZZ J Screw HM726 LX-GZ3002PEZZ J Screw HM740 LX-GZ3002PEZZ J Screw HM741 LX-GZ3002PEZZ J Screw HM742 LX-GZ3002PEZZ J Screw RDA501 PRDAR0297PEFW J Heat Sink, for IC501 RDA602 PRDAR0216PEFW J Heat Sink, for Q602 RDA701 PRDAR0026PEFW J Heat Sink, for Q701 LX-BZ3100CEFD J Screw
SWITCHES
S2501 QSW-K0202PEZZ or QSW-K0079GEZZ S2502 QSW-K0202PEZZ or QSW-K0079GEZZ S2503 QSW-K0202PEZZ or QSW-K0079GEZZ S2504 QSW-K0202PEZZ or QSW-K0079GEZZ S2505 QSW-K0202PEZZ or QSW-K0079GEZZ J Power J VOL-Down J VOL-Up J CH-Down J CH-Up AC AC AC AC AC
MISCELLANEOUS PARTS
!
F701
QFS-B4023CEZZ or QFS-B0421GEZZ FB351 RBLN-0047CEZZ or RBLN-0091GEZZ FB601 RBLN-0047CEZZ FB2002 RBLN-0037CEZZ or RBLN-0091GEZZ
AC AB AB AB
24
20MR10
Ref. No.
Part No.
Description
Code
Ref. No.
Part No.
Description
Code
MISCELLANEOUS PARTS
ACC701 QACCD3064CESA or QACCD3090CESA or QACCD3060CESA SP1 VSP0080PBP7YA QCNW-2111PEZZ QCNW-2112PEZZ QCNW-2160PEZZ TCAUS3000GJZZ TLABM0003GJZZ J AC Cord AM
X J J J X X
Speaker, 32 ohm Connecting Cord Connecting Cord Connecting Cord Caution Card Label
AL AF AF AG AB AB
DIODES
D882 D885 RH-DX0475CEZZ RH-DX0475CEZZ J Diode J Diode AB AB
SUPPLIED ACCESORRIES
RRMCG1339CESB X Infrared R/C Unit TiNS-7371GJZZ X Operation Manual AQ AG
COIL
L852 VP-MK820K0000 J Peaking 82H AB
CAPACITORS
C851 C852 C853 C854 C883
AA AA AA AC AB
PACKING PARTS
(NOT REPLACEMENT ITEM)
SPAKC0210GJZZ SPAKP0102GJZZ SPAKX0003GJZZ SSAKA0101GJZZ Packing Case Wrapping Paper Buffer Material Polyethylene Bag
RESISTORS
R851 R852 R853 R857 R858 R859 R860 R861 R865 R866 R867 R868 R869 R873 R874 R881 R882 R883 R884 R886 R887
[M-Ox. Metal Oxide] VRS-CY1JF470J J 47 1/16W VRD-RA2BE181J J 180 1/8W VRS-CY1JF121J J 120 1/16W VRS-VU3AE123J J 12k 1W VRD-RM2HD332J J 3.3k 1/2W VRS-CY1JF470J J 47 1/16W VRD-RA2BE181J J 180 1/8W VRS-CY1JF121J J 120 1/16W VRS-VU3AE123J J 12k 1W VRD-RM2HD332J J 3.3k 1/2W VRS-CY1JF470J J 47 1/16W VRS-CY1JF181J J 180 1/16W VRS-CY1JF121J J 120 1/16W VRS-VU3AE123J J 12k 1W VRD-RM2HD332J J 3.3k 1/2W VRS-CY1JF561J J 560 1/16W VRS-CY1JF391J J 390 1/16W VRD-RA2BE561J J 560 1/8W VRS-CY1JF152J J 1.5k 1/16W VRS-CY1JF821J J 820 1/16W VRD-RA2BE470J J 47 1/8W
M-Ox. Carbon M-Ox. M-Ox. Carbon M-Ox. Carbon M-Ox. M-Ox. Carbon M-Ox. M-Ox. M-Ox. M-Ox. Carbon M-Ox. M-Ox. Carbon M-Ox. M-Ox. Carbon
AA AA AA AB AA AA AA AA AB AA AA AA AA AB AA AA AA AA AA AA AA
CABINET PARTS
1 1-1 1-2 1-3 1-4 2 CCABA0006WEH2 Not Available GCOVA0003GJSA HBDGB1001GJSB JBTN-0003GJSD X X X X Front Cabinet Assy Front Cabinet Cover for R/C Badge, "SHARP" Button(Power, Vol-up/down, CH-up/down) AY AG AF AH AW
1 1-1
MISCELLANEOUS PARTS
P851 QPLGN0561CEZZ J Plug, 5-pin(GBN) P852 QPLGN0461CEZZ J Plug, 4-pin(YBN) SC851 QSOCV0933CEZZ J CRT Socket or QSOCV0016PEZZ AB AB AH
1-3
1-2
1-4
25
20MR10
Ref. No.
Part No.
Description
Code PACKING OFRef. No. SET THE Part No. Polyethylene Bag
Description
Code
Buffer Material
FRONT
Packing Case
REAR
26
20MR10
Ref. No.
Part No.
Description
Code
Ref. No.
Part No.
Description
Code
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.
SHARP ELECTRONICA MEXICO S.A. DE C.V. Blvd. SHARP No. 3510 Parque Industrial Rosarito, Playas de Rosarito, B. C. 22710
30