Professional Documents
Culture Documents
1
NISSAN SERIES:RB26,RB30 and 4.5L,4.8L ETC
ARP 2000 BOLTS
207-N01-010 C-C Length:121mm H/IQ-Beam Racing Rod $450 Set of 6 pcs
B-Endφ:51mm , P-Endφ:21mm
Gram Weight:525/485
Pin End Weight:160/130
Standard RB26
207-N01-010A C-C Length:119.5mm H/IQ-Beam Racing Rod $450 Set of 6 pcs
B-Endφ:51mm , P-Endφ:21mm
Gram Weight:525/485
Pin End Weight:160/130
Custom RB28
207-N01-020 C-C Length:133mm H/IQ-Beam Racing Rod $300 Set of 4 pcs
B-Endφ:53mm , P-Endφ:21mm
Gram Weight:555/535
Pin End Weight:170/155
Standard L16,L24
207-N01-030 C-C Length:144.2mm H/IQ-Beam Racing Rod $450 Set of 6 pcs
B-Endφ:55mm , P-Endφ:22mm
Gram Weight:555/535
Pin End Weight:170/155
Standard VQ35
207-N01-040 C-C Length:154.2mm H/IQ-Beam Racing Rod $450 Set of 6 pcs
B-Endφ:53mm , P-Endφ:22mm
Gram Weight:545/526
Pin End Weight:175/148
Standard VG30,VG33
207-N01-050 C-C Length:165mm H-Beam Racing Rod $300 Set of 4 pcs
B-Endφ:53mm , P-Endφ:21mm
Gram Weight:760
Pin End Weight:224
Standard KA24
207N01-070 C-C Length:136.3mm H/IQ-Beam Racing Rod $300 Set of 4 pcs
B-Endφ:51mm , P-Endφ:22mm
Gram Weight:555/535
Pin End Weight:170/155
Standard SR20
2
MITSUBISHI SERIES:4G63
Racing Rod:
207-M01-010 C-C Length:150mm H-Beam Racing Rod $300 Set of 4 pcs
B-Endφ:48mm , P-Endφ:22mm
Standard 4G63 STANDARD
207-M01-020 C-C Length:147mm H-Beam Racing Rod $300 Set of 4 pcs
B-Endφ:48mm , P-Endφ:22mm
Custom 4G63 use for 2.3L 10Omm stroke
3
LG3-5933H/I/IQ 5933 H-Beam 2.239 0.866 577/560/540 174/164/153
4
VW SERIES,4340 billet,ARP 2000 BOLTS
Part No. C-C Length Description B-Endφ P-Endφ Gram Weight PinEndWeight
5
Mass control
1. ZSPEED rods forging is made of air space quality Cr. Mo.Ni.Steel (American SAE 4340) for all high performance
racing rods The rod itself and cap have been stamped and forged separately which ensures the fiber direction of
metal structures conformable to the stress direction during the movement of the connecting rod and
further maintain the strength of the rod Auto Controlled Continuous Furnace is employed for heat treatment and
this kind of treatment ensures the strength inside and outside the torging stay the same and also improves the
mechanical properth significantlv.
3. Coverage factor of cloudbursting is 100%. After cloudbursting, the connecting rods will be stress
arising from the machine work and to from deformation .
4. Inspect each procedure completely in order to prevent defective works from entering into the
following procedure and to further ensure 100% pass.
5. Manufacture the connecting rod in consideration of the properties of ARP bolts used in order to
produce a perfect operation between the bolt and the rod.
6. Balance Weight of Big and Small Ends: weight difference of every small end is not more than +/-1g
and its total weight is not more than +/-1g.
7. Customer oem/odm also welcome , please contact us for detail information.