Professional Documents
Culture Documents
Exploration Routing: OSPF Skills Based Assessment: Exam Objectives
Exploration Routing: OSPF Skills Based Assessment: Exam Objectives
Exam Objectives
Completion of this exam requires the following tasks: Create an addressing scheme to accommodate the hosts on the network Cable network according to the diagram Configure OSPF Configure OSPF priorities Configure OSPF cost Verify OSPF operation Configure a static default route
Scenario
You are a network engineer for a company with multiple locations that are connected through a switch. You are assigned the task of creating an addressing scheme for each clients LAN. You must set the OSPF priorities so that the HQ router is the DR and the Remote_1 router is the BDR. You must also make sure that the Remote_2 router never takes part in the DR/BDR election.
All contents are Copyright 20072009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 4
Remote_2
10.10.10.2
255.255.255.248
Remote_2
All contents are Copyright 20072009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 2 of 4
All contents are Copyright 20072009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 3 of 4
Step 2: Verify that all networks are present in the routing table.
All contents are Copyright 20072009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 4 of 4