Professional Documents
Culture Documents
Electrical equipment with operating voltages of more than 65 Volt need protective conductors. Metal enclosures also need an external protective conductor connection.
BARTEC supplies these connections in three different sizes. The connections correspond to VDE 0170 and carry marking or .
2
Installation instructions (A): Push in square cap (do not hammer in); put on terminal clamp and fasten screw with spring washer. Screw type terminals with U-brackets have to be wired according to EN 60999-1; 2000.
5
6 A 10 6.8 + 0.1*
> 9.5
15 8.8 + 0.1*
4.9 + 0.1*
>8
> 10
Selection chart
Name Nominal cross section 1.5 mm 4.0 mm Earth terminals 10.0 mm 1.5 mm 4.0 mm 10.0 mm 1.5 mm 4.0 mm
03-0330-0213-08/08-BCS-201182/2
Possible conductors
Socket material
Order no.
1.5 mm stranded, 2.5 mm single wire 4.0 mm stranded, 6.0 mm single wire 10.0 mm stranded, 10.0 mm single wire 1.5 mm stranded, 2.5 mm single wire 4.0 mm stranded, 6.0 mm single wire 10.0 mm stranded, 10.0 mm single wire 1.5 mm stranded, 2.5 mm single wire 4.0 mm stranded, 6.0 mm single wire 10.0 mm stranded, 10.0 mm single wire 1.5 mm stranded, 2.5 mm single wire 4.0 mm stranded, 6.0 mm single wire 10.0 mm stranded, 10.0 mm single wire
Ms nickel-plated Ms nickel-plated Ms nickel-plated Niro steel Niro steel Niro steel Ms nickel-plated Ms nickel-plated Ms nickel-plated Niro steel Niro steel Niro steel
05-0012-0038 05-0012-0001 05-0012-0003 05-0012-0039 05-0012-0018 05-0012-0022 05-0012-0002 05-0012-0034 05-0012-0035 05-0012-0019 05-0012-0036 05-0012-0037
PE terminals
125