Professional Documents
Culture Documents
Checklist For Verifying Bicycle and Riders Position
Checklist For Verifying Bicycle and Riders Position
STANDARD CASE: Using dimension-checking gauge (on a level surface) Check saddle position is -5 cm and advanced handlebar position does not exceed + 75 cm Check that the handlebar extension is horizontal Check for the presence of a fairing, protective screen or fuselage (rear wheel) Check the 1:3 ratio rule has been observed (handlebars, seat post) General check
SPECIAL CASE: Agreed in an "Exemption Report"; only one exemption can be granted Using dimension-checking gauge (on a level surface) Check saddle position is -5 cm and/or advanced handlebar position does not exceed + 75 cm including correction = corrected measurement (exemption information) Check that the handlebar extension is horizontal Check for the presence of a fairing, protective screen or fuselage (rear wheel) Check the 1:3 ratio rule has been observed (handlebars, seat post) General check
Equipment / Commissaires
1/1