Professional Documents
Culture Documents
43 52 35 44 17 34 1 18
1 2 3 4 5 6 7 8 9
Subthrottle Valve Actuator Drive Signal 2 Subthrottle Valve Actuator Drive Signal 1 Water Temperature Warning Light Signal Unused Oxygen Sensor Signal (Europe Models) Speed Sensor Signal Main Throttle Sensor Signal Inlet Air Pressure Sensor Signal Unused
29 Oxygen Sensor Heater Signal (Europe Models) P/BK 30 Crankshaft Sensor (-) Signal Y/BK
31 Unused 32 External Diagnosis System Signal 33 Unused 34 Ground to ECU 35 Engine Stop Switch Signal BK/Y R R/G BR/R LG/BK
10 Power Supply to Sensors 11 Vehicle-down Sensor Signal 12 Neutral Switch Signal 13 Crankshaft Sensor (+) Signal 14 Unused 15 Unused
BL Y/G
LG
36 Starter Lockout Switch Signal 37 Starter Button Signal 38 Unused 39 Fuel Pump Relay Signal 40 Air Switching Valve Signal 41 Fuel Injector #2 Signal 42 Fuel Injector #1 Signal 43 Stick Coil #1 Signal 44 Side Stand Switch Signal 45 Radiator Fan Relay Signal 46 External Communication Line (Mode Switch) 47 Tachometer Signal
R/BK
BR/Y R/BK BL/G BL/R BK G/BK P/BL LG/W LB BR/R GY BK/Y BK/Y BK/G
16 Power Supply to ECU (from ECU Main Relay) BR/W 17 Power Supply to ECU (from Battery) 18 Subthrottle Valve Actuator Drive Signal 4 19 Subthrottle Valve Actuator Drive Signal 2 20 Water Temperature Sensor Signal 21 Unused 22 Self-diagnosis Terminal 23 Unused 24 Subthrottle Sensor Signal 25 Unused 26 Inlet Air Temperature Sensor Signal COLOR CODE BK BL BR G GY LB LG O P PU R W Y Black Blue Brown Green Gray Light Blue Light Green Orange Pink Purple Red White Yellow NOTE 2 NOTE 1 Y BR O/BK W/BK P W/BL O
48 FI Indicator Light (LED) 49 Ignition Switch (See NOTE 2) 50 Ground for Fuel System 51 Ground for Ignition System 52 Stick Coil #2 Signal
The pinout functions were taken from a table in the Kawasaki Manual. The wire colors were determined from the wiring diagram and visually checked pin-for-pin on the connectors of an ECU and wiring harness from a North American market bike. There may be deviations in other markets I do not know about.
In the Kawasaki Manual pin 49 is not shown connected. Neither is it shown as "Unused". Rather, there is a hyphen in the description column and no wire color listed. A visual inspection of an ECU and harness verified that a grey wire is connected from pin 49 to the ignition switch. I do not know the function of this wire yet.