You are on page 1of 2

LD, LDI Functions : The LD in used to start the operation of Contact A and the LDI is used to start the

operation of Contact B. The information(ON/OFF) on the assigned device are read, being taken as the result of their operation. Example of program :

OR, ORI Functions : The OR is used to connect in a parallel instruction with Contact A and ORI is used to connect in a parallel with Contact B. The information(ON/OFF) on the assinged device is read and OR-operated with the result of the operation till then. The result of the OR-operation is takenas the result of their operation.

Example of program :

You might also like