Professional Documents
Culture Documents
DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares that this RM-209 product is in
compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC
A copy of the Declaration of Conformity can be found from
http://www.nokia.com/phones/declaration_of_conformity/.
0434
Copyright © 2006 Nokia. All rights reserved.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for
personal and noncommercial use in connection with information which has been
encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged
in a personal and noncommercial activity and (ii) for use in connection with
This device complies with Directive 2002/95/EC on the restriction of the use of
certain hazardous substances in electrical and electronic equipment.
Under no circumstances shall Nokia be responsible for any loss of data or income
or any special, incidental, consequential or indirect damages howsoever caused.
The contents of this document are provided "as is". Except as required by
applicable law, no warranties of any kind, either express or implied, including, but
not limited to, the implied warranties of merchantability and fitness for a
particular purpose, are made in relation to the accuracy, reliability or contents of
this document. Nokia reserves the right to revise this document or withdraw it at
any time without prior notice.
The availability of particular products may vary by region. Please check with the
Nokia dealer nearest to you.
Issue 1
INTERACTIVE DEMONSTRATIONS
SOFTWARE Learn how to set up your phone for
the first time, and find out more
about its features. Interactive
Demonstrations give step-by-step
instructions on using your phone.
USER’S GUIDE
The online User’s Guide contains
detailed information on your phone.
Remember to check regularly
for updates.
SOFTWARE
Make the most of your phone with
software for your phone and PC. Nokia
PC Suite connects your phone and PC
so you can manage your calendar,
contacts, music and images, while
USER’S GUIDE other applications complement its use.
SETTINGS
Certain phone functions, such as
multimedia messaging, mobile
browsing and email*, may require
SETTINGS
settings before you can use them. Have
them sent to your phone free of charge.
*Not available on all phones.
HOW DO I USE MY PHONE?
The Set Up section, at www.nokia-asia.com/setup, helps you prepare your phone
for use. Familiarise yourself with phone functions and features by referring to the
Guides and Demos section at www.nokia-asia.com/guides.
1. Get started
■ Install SIM card and Remove the battery as shown (2).
battery Open (3) the SIM card holder.
Always switch the device off and
disconnect the charger before
removing the battery.
Keep all SIM cards and memory
cards out of the reach of small Insert the SIM card properly into
children. the holder (4). Close the SIM card
For availability and information on holder (5), and slightly press the
using SIM card services, contact holder to lock it (6).
your SIM card vendor. This may be
the service provider, network
operator, or other vendor.
This device is intended for use with
BL-4B battery. Always use original Replace the battery (7). Observe
Nokia batteries. See ”Nokia battery the battery contacts. Slide the
authentication guidelines” p. 81. back cover into its place (8, 9).
The SIM card and its contacts can
easily be damaged by scratches or
bending, so be careful when
handling, inserting, or removing
the card.
To remove the back cover of the
phone, press and slide the cover ■ Insert a microSD card
(1). Keep all microSD
memory cards out of
the reach of small
children.
Switch the phone off, and remove
the back cover and the battery of
the phone.
2. Your phone
■ Keys and parts Keypad (10)
Microphone (11)
Phone strap eyelet (12)
Charger connector (13)
Pop-PortTM connector (14)
■ Standby mode
When the phone is ready for use,
and you have not entered any
Earpiece (1) characters, the phone is in the
standby mode.
Twin stereo speakers (2)
Left selection key (3) Display
Middle selection key (4) Signal strength of the cellular
Right selection key (5) network (1)
Volume key and zoom key (6) Battery charge status (2)
4-way scroll key (7) Indicators (3)
Call key (8) Name of the network or the
End key (9) operator logo (4)
Active standby
In the active standby mode there is
a list of selected phone features
and information on the screen
that you can directly access. To
switch it on or off, select Menu >
Settings > Display > Active
standby > Active standby mode >
On or Off.
In the standby mode, scroll up or
Clock (5) down to activate the navigation in
Main screen (6) the list, and select Select or View.
Left and right arrows at the
Function of left selection key (7) is beginning and end of a line
Go to or a shortcut to another indicate that further information
function. See ”Left selection key” is available by scrolling left or
p. 47. right. To end the active standby
Function of middle selection key navigation mode, select Exit.
(8) is Menu To organize and change the active
Function of right selection key (9) standby mode, activate the
is Music or a shortcut to another navigation mode, and select
function. See”Right selection key” Options and from the available
p. 47. Operator variants may have options.
an operator-specific name to
access an operator-specific Web Shortcuts in the standby
site. mode
• To access the list of dialed
Power saving numbers, press the call key
Your phone has some features in once. Scroll to the number or
order to save battery power in name that you want; and to
standby mode if the phone is not call the number, press the call
active. These features may be key.
activated or not. See Power saver
• To open the web browser, press
and Sleep mode in ”Display” p. 45.
and hold 0.
3. Call functions
■ Make a call Speed dialing
1. Enter the phone number, Assign a phone number to one of
including the area code. the speed-dialing keys, 2 to 9. See
For international calls, press * ”Speed dials” p. 43. Call the
twice for the international number in either of the following
prefix (the + character replaces ways:
the international access code), • Press a speed-dialing key, then
enter the country code, the the call key.
area code without the leading • If Speed dialling is set to On,
0, if necessary, and the phone press and hold a speed-dialing
number. key until the call begins. See
2. To call the number, press the Speed dialling in ”Call” p. 51.
call key.
To adjust the volume in a call, Enhanced voice dialing
press the volume up or down You can make a phone call by
key. saying the name that is saved in
3. To end the call or to cancel the the contact list of the phone. Voice
call attempt, press the end key, commands are language-
or close the phone. dependent. To set the language,
see Recognition lang. in ”Phone”
To search for a name or phone
p. 52.
number that you have saved in
Contacts, see ”Search for a Note: Using voice tags
contact” p. 41. Press the call key to may be difficult in a noisy
call the number. environment or during an
emergency, so you should
To access the list of dialed
not rely solely upon voice
numbers, press the call key once in
dialing in all
the standby mode. To call the
circumstances.
number, select a number or name,
and press the call key. 1. In the standby mode, press and
hold the right selection key, or
press and hold the volume
4. Write text
To enter text (for example, when characters are available under the
writing messages), use traditional number key 1.
or predictive text input. When you
write text, press and hold Options ■ Predictive text input
to toggle between traditional text
Predictive text input is based on a
input, indicated by , and
built-in dictionary to which you
predictive text input, indicated by
can also add new words.
. Not all languages are
supported by predictive text input. 1. Start writing a word, using the
keys 2 to 9. Press each key only
The character cases are indicated
once for one letter.
by , , and . To change
the character case, press #. To 2. When you finish writing the
change from the letter to number word and it is correct, to
mode, indicated by , press and confirm it by adding a space,
hold #, and select Number mode. press 0.
To change from the number to the If the word is not correct, press
letter mode, press and hold #. * repeatedly, and select the
To set the writing language, select word from the list.
Options > Writing language. If the ? character is displayed
after the word, the word you
■ Traditional text input intended to write is not in the
dictionary. To add the word to
Press a number key, 1 to 9,
the dictionary, select Spell.
repeatedly until the desired
Enter the word using
character appears. The characters
traditional text input, and
available depend on the selected
select Save.
writing language. If the next letter
you want is located on the same To write compound words, enter
key as the present one, wait until the first part of the word, and
the cursor appears and enter the press the scroll key right to
letter. The most common confirm it. Write the last part of
punctuation marks and special the word, and confirm the word.
3. Start writing the next word.
6. Messaging
You can read, write, send, and save Chinese, take up more space
text, multimedia, e-mail, audio, limiting the number of characters
and flash messages. All messages that can be sent in a single
are organized into folders. message.
An indicator at the top of the
■ Text message display shows the total number of
With the short message service characters left and the number of
(SMS) you can send and receive messages needed for sending. For
text messages, and receive example, 673/2 means that there
messages that can contain are 673 characters left and that
pictures (network service). the message will be sent as a
series of 2 messages.
Before you can send any text or
SMS e-mail message, you must
save your message center number. Write and send a message
See ”Message settings” p. 38. 1. Select Menu > Messaging >
To check SMS e-mail service Create message > Text
availability and to subscribe to the message.
service, contact your service 2. Enter one or more phone
provider. To save an e-mail address numbers or e-mail addresses in
in Contacts, see ”Save details” the To: field. To retrieve a
p. 41. phone number or e-mail
Your device supports the sending address from a memory, select
of text messages beyond the Add.
character limit for a single 3. For a SMS e-mail, enter a
message. Longer messages will be subject in the Subject: field.
sent as a series of two or more 4. Write your message in the
messages. Your service provider Message: field.
may charge accordingly.
5. To send the message, select
Characters that use accents or
Send. See ”Message sending”
other marks, and characters from
p. 29.
some language options like
Create a message
■ Folders
1. Select Menu > Messaging >
The phone saves received
Create message > Audio
messages in the Inbox folder.
message. The recorder opens.
To use the recorder, see ”Voice Messages that have not yet been
recorder” p. 64. sent are saved in the Outbox
folder.
2. Record your message.
To set the phone to save the sent
3. Enter one or more phone
messages in the Sent items folder,
numbers in the To: field, or
see Save sent messages in
select Add to retrieve a
”General settings” p. 38.
number.
To edit and send messages that
4. To send the message, select
you have written and saved in the
Send.
Drafts folder, select Menu >
Messaging > Drafts.
Listen to a message
You can move your messages to
To open a received audio message, the Saved items folder. To
select Play; or if more than one organize your Saved items
message is received, select Show subfolders, select Menu >
> Play. To listen to the message Messaging > Saved items. To add
later, select Exit. a folder, select Options > Add
folder. To delete or rename a
■ Memory full folder, scroll to the desired folder,
When you receive a message, and and select Options > Delete folder
the memory for the messages is or Rename folder.
full, Memory full. Unable to
Delivery reports > Yes — to ask the with accents and other marks may
network to send delivery reports be converted to other characters.
about your messages (network Rep. via same centre > Yes — to
service) allow the recipient of your
Message centres > Add centre — message to send you a reply using
to set the phone number and name your message center (network
of the message center that is service)
required for sending text
messages. You receive this number Multimedia messages
from your service provider.
The message settings affect the
Msg. centre in use — to select the sending, receiving, and viewing of
message center in use multimedia messages. You may
E-mail msg. centres > Add centre receive the configuration settings
— to set the phone numbers and for multimedia messaging as a
name of the e-mail center for configuration message. See
sending SMS e-mails. ”Configuration settings service”
E-mail centre in use — to select p. 13. You can also enter the
the SMS e-mail message center in settings manually. See
use ”Configuration” p. 54.
Message validity — to select the Select Menu > Messaging >
length of time for which the Message settings > Multimedia
network attempts to deliver your messages and from the following
message options:
Messages sent via — to select the Delivery reports > Yes — to ask the
format of the messages to be sent: network to send delivery reports
Text, Paging, or Fax (network about your messages (network
service) service)
Use packet data > Yes — to set Img. size (MMS plus) — to set the
GPRS as the preferred SMS bearer image size in multimedia plus
messages
Character support > Full — to
select all characters in the Image size (MMS) — to set the
messages to be sent as viewed. If image size in multimedia
you select Reduced, characters messages
7. Contacts
8. Call log
The phone registers your missed, Some timers may be reset during
received, and dialed calls if the service or software upgrades.
network supports it and the phone
is switched on and within the ■ Location information
network service area.
The network may send you a
To view the information on your location request (network service).
calls, select Menu > Log > Missed Contact your service provider to
calls, Received calls, or Dialled subscribe and to agree upon the
numbers. To view your recent delivery of location information.
missed and received calls and the
To accept or reject the location
dialed numbers chronologically,
request, select Accept or Reject. If
select Call log. To view the
you miss the request, the phone
contacts to whom you most
automatically accepts or rejects it
recently sent messages, select
according to what you have
Msg. recipients.
agreed with your network operator
To view the approximate or service provider. The phone
information on your recent displays 1 missed position
communications, select Menu > request. To view the missed
Log > Call duration, Data counter, location request, select Show.
or Pack. data timer.
To view the information on the 10
To view how many text and most recent privacy notifications
multimedia messages you have and requests or to delete them,
sent and received, select Menu > select Menu > Log > Positioning
Log > Message log. > Position log > Open folder or
Note: The actual invoice Delete all.
for calls and services from
your service provider may
vary, depending on
network features,
rounding off for billing,
taxes, and so forth.
9. Settings
phone on the PC. Use Bluetooth To activate the phone for data
wireless technology or a USB data transfer or image printing, connect
cable for the synchronization, and the data cable. Confirm USB data
start the synchronization from the cable connected. Select mode.
PC. and select from the following
options:
Synchronize from a server
To use a remote Internet server, Nokia mode — to use the cable for
subscribe to a synchronization PC Suite
service. For more information and Printing & media — to use the
the settings required for this phone with a PictBridge
service, contact your service compatible printer or with your
provider. You may receive the compatible PC
settings as a configuration Data storage — to connect to a PC
message. See ”Configuration that does not have Nokia software
settings service” p. 13 and and use the phone as a data
”Configuration” p. 54. storage device
To start the synchronization from To change the USB mode, select
your phone, select Menu > Menu > Settings > Connectivity
Settings > Connectivity > Data > USB data cable > Nokia mode,
transfer > Server sync. Depending Printing & media, or Data
on the settings, select Initialising storage.
synchronisation or Initialising
copy.
■ Call
Synchronizing for the first time or
Select Menu > Settings > Call and
after an interrupted
from the following options:
synchronization may take up to 30
minutes to complete. Call divert — to divert your
incoming calls (network service).
You may not be able to divert your
USB data cable
calls if some call barring functions
You can use the USB data cable to are active. See Call barring service
transfer data between the phone in ”Security” p. 54.
and a compatible PC or a printer
Voice clarity > Active — to
supporting PictBridge. You can
enhance speech intelligibility
also use the USB data cable with
especially in noisy environments
Nokia PC Suite.
on whether the flight profile shall Select Menu > Settings >
be used. With flight profile all Enhancements. Select an
radio connections are switched enhancement, and depending on
off. The flight profile should be the enhancement, from the
used in areas sensitive to radio following options:
emissions. Default profile — to select the
Phone updates — to receive phone profile that you want to be
software updates from your automatically activated when you
service provider (network service). connect to the selected
This option may not be available, enhancement
depending on your phone. See Automatic answer — to set the
”Phone software updates” p. 55. phone to answer an incoming call
Operator selection > Automatic — automatically after 5 seconds. If
to set the phone to automatically Incoming call alert is set to Beep
select one of the cellular networks once or Off, automatic answer is
available in your area. With off.
Manual you can select a network Lights — to set the lights
that has a roaming agreement permanently On. Select Automatic
with your service provider. to set the lights on for 15 seconds
Confirm SIM actions — See ”SIM after a key press.
services” p. 77. Text phone > Use text phone >
Help text activation — to select Yes — to use the text phone
whether the phone shows help settings instead of headset or
texts. loopset settings
Start-up tone > On— The phone If your phone is provided with a
plays a tone when it is switched hearing aid coil, select Hearing aid
on. > T-coil hrng. aid mode > On to
optimize the sound quality when
■ Enhancements using a t-coil hearing aid. The
icon is shown when the T-coil
This menu or the following options
hrng. aid mode is active.
are shown only if the phone is or
has been connected to a
compatible mobile enhancement.
service). This option may not be from your service provider. Select
available, depending on your Current softw. details to display
phone. the current software version and
Warning: If you install a check whether an update is
software update, you needed. Select Downl. phone
cannot use the device, softw. to download and install a
even to make emergency phone software update. Follow the
calls, until the update is instructions on the display.
completed and the device
is restarted. Be sure to Install a software update
backup data before Select Install softw. update to
accepting a software start the installation, when the
update. installation was cancelled after
the download.
Settings The software update may take
To allowed or disallow phone several minutes. If there are
software updates, select Menu > problems with the installation,
Settings > Configuration > Device contact your service provider.
manager sett. > Serv. softw.
updates and following options:
Always allow — to perform all
software downloads and updates
automatically
Always reject — to reject all
software updates
Confirm first — to perform
software downloads and updates
only after your confirmation
(default setting)
11. Gallery
In this menu you can manage the memory card, and press the
images, video clips, music files, scroll key right.
themes, graphics, tones,
recordings, and received files. ■ Print
These files are stored in the phone images
memory or an attached microSD
memory card and may be arranged Your device supports Nokia
in folders. XPressPrint. To connect it to a
compatible printer use a data
Your phone supports an activation cable or send the image using
key system to protect acquired Bluetooth to a printer supporting
content. Always check the delivery Bluetooth technology. See
terms of any content and ”Connectivity” p. 48.
activation key before acquiring
them, as they may be subject to a You can print images that are in
fee. the JPEG format. The images taken
with the camera are automatically
Copyright protections may prevent saved in the JPEG format.
some images, music (including
ringing tones), and other content Select the image you want to print
from being copied, modified, and Options > Print.
transferred or forwarded.
To see the list of folders, select ■ Memory card
Menu > Gallery. Keep all memory cards out of the
To see the available options of a reach of small children.
folder, select a folder and Options. You can use the microSD memory
To view the list of files in a folder, card to store your multimedia files
select a folder and Open. such as video clips, music tracks,
and sound files, images, and
To see the available options of a messaging data.
file, select a file and Options.
Some of the folders in Gallery with
To view the folders of the memory content that the phone uses (for
card when moving a file, scroll to
12. Media
When taking and using images or saves the images on the memory
video clips, obey all laws and card.
respect local customs as well as Select Options to set Night mode
privacy and legitimate rights of on if the lighting is dim, Self-timer
others including copyrights. on to activate the self-timer, or
Img. sequence on to take images
■ Camera and video in a fast sequence. With the
You can take images or record highest image size setting, three
video clips with the built-in images are taken in a sequence;
camera. with other size settings, five
images are taken.
Take an image Select Options > Settings >
Image preview time and a preview
To have the still image function,
time to display captured. During
press the camera key in the
the preview time, select Back to
standby mode, select Menu >
take another image or Send to
Media > Camera, or if the video
send the image as a multimedia
function is on, scroll left or right.
message.
To take an image in landscape
Your device supports an image
format, hold the phone in a
capture resolution of 1200 x 1600
horizontal position. To zoom in
pixels. The image resolution in
and out in the camera mode, press
these materials may appear
the scroll key up and down or the
different.
volume keys.
Record. To pause the recording, Select Menu > Media > Media
select Pause; to resume the player > FF/Rew interval to set the
recording, select Continue; to step width for fast forward or
stop the recording, select Stop. rewind.
The phone saves the video clips on
the memory card or the phone Configuration for a
memory. streaming service
You may receive the configuration
Camera and video options settings required for streaming as
To use a filter, select Options > a configuration message from the
Effects > False colours, Greyscale, service provider. See
Sepia, Negative, or Solarise. ”Configuration settings service”
To adopt the camera to the light p. 13. You can also enter the
conditions, select Options > settings manually. See
White balance > Auto, Daylight, ”Configuration” p. 54. To activate
Tungsten or Fluorescent. the settings, do the following:
To change other camera and video 1. Select Menu > Media > Media
settings and to select the image player > Streaming settings >
and video storage select Options Configuration.
> Settings. 2. Select a service provider,
Default, or Personal config. for
■ Media player streaming.
With the media player you can 3. Select Account and a
view, play, and download files, streaming service account
such as images, audio, video, and contained in the active
animated images. You can also configuration settings.
view compatible streaming videos
from a network server (network ■ Music player
service). Your phone includes a music
Select Menu > Media > Media player for listening to music tracks
player > Open gallery, or other MP3 or AAC sound files
Bookmarks, Go to address, or that you have downloaded from
Media downloads to select or the Web or transferred to the
download media.
phone with Nokia PC Suite. See To skip to the next track, select
”Nokia PC Suite” p. 78. . To skip to the beginning of
Copyright protections may prevent the previous track, select .
some images, music (including To rewind the current track, select
ringing tones), and other content and hold . To fast forward the
from being copied, modified, current track, select and hold .
transferred or forwarded. Release the key at the position you
Music files stored in the music want.
folder in the phone memory or on To stop the music player, select
the memory card will Back.
automatically be detected and
added to the music library during Music player options
the startup of the phone.
In the Music player menu, select
To open the music player, select from the following options:
Menu > Media > Music player.
Show tracks — View all available
tracks of the active track list and
Playing the music tracks play the desired track. To play a
Warning! Listen to music track, scroll to the desired track,
at a moderate level. and select Play.
Continuous exposure to Music library — View all available
high volume may damage tracks ordered according to
your hearing. Artists, Albums, Genres,
Operate the music player with the Composers, or Track lists. Select
virtual keys on the display. Update library to refresh the lists.
When you open the Music player Track lists generated with the
menu, the details of the first track Nokia Music Manager you will find
on the default track list are shown. under Track lists > My track lists.
To start playing, select . Play options — Select Random to
To adjust the volume level, use the play the tracks on the track list in
volume keys on the side of the random order. Select Repeat to
phone. play the current track or the entire
track list repeatedly.
To pause the playing, select .
Media equaliser — to select or
define an equalizer setting
■ Equalizer
You can control the sound quality
when using the music player by
amplifying or diminishing
frequency bands.
Select Menu > Media > Equaliser.
To activate a set, scroll to one of
the equalizer sets, and select
Activate.
To view, edit, or rename a selected
set, select Options > View, Edit, or
Rename. Not all sets can be edited
or renamed.
■ Stereo widening
Stereo widening enhances the
audio output of the phone by
enabling a wider stereo sound
effect. To change the setting,
select Menu > Media > Stereo
widening.
13. Organizer
In Auto-delete notes you can set To view a note, scroll to it, and
the phone to delete old notes select View. While viewing a note,
automatically after a specified you can also select an option to
time. edit the attributes. You can also
select an option to delete the
Make a calendar note selected note and delete all the
notes that you have marked as
Select Menu > Organiser >
done.
Calendar. Scroll to the date, and
select Options > Make a note and
one of the following note types: ■ Notes
Meeting, Call, Birthday, To write and send notes, select
Memo, or Reminder. Fill in Menu > Organiser > Notes.
the fields. To make a note if no note is added,
select Add; otherwise, select
Note alarm Options > Make a note. Write the
The phone displays the note and if note, and select Save.
set, sounds a tone. With a call note
on the display, to call the ■ Calculator
displayed number, press the call
The calculator in your phone
key. To stop the alarm and to view
provides basic arithmetic and
the note, select View. To stop the
trigonometric functions,
alarm for 10 minutes, select
calculates the square and the
Snooze.
square root, the inverse of a
To stop the alarm without viewing number, and converts currency
the note, select Exit. values.
Note: This calculator has
■ To-do list limited accuracy and is
To save a note for a task that you designed for simple
must do, select Menu > Organiser calculations.
> To-do list. Select Menu > Organiser >
To make a note if no note is added, Calculator. Press # for a decimal
select Add; otherwise, select point. Scroll to the desired
Options > Add. Fill in the fields, operation or function, or select it
and select Save. from the Options.
To save the exchange rate, select Select Menu > Organiser >
Options > Exchange rate. Stopwatch and from the following
options:
■ Countdown timer Split timing — to take
To start the countdown timer, intermediate times. To start the
select Menu > Organiser > time observation, select Start.
Countd. timer > Normal timer, Select Split every time that you
enter the alarm time, and write a want to take an intermediate time.
note that will be displayed when To stop the time observation,
the time expires. To start the select Stop.
countdown timer, select Start. To To save the measured time, select
change the countdown time, Save.
select Change time. To stop the To start the time observation
timer, select Stop timer. again, select Options > Start. The
To have an interval timer with up new time is added to the previous
to 10 intervals started, enter the time. To reset the time without
intervals. Select Menu > saving it, select Reset.
Organiser > Countd. timer > Lap timing — to take lap times
Interval timer. To start the timer,
Continue — to view the timing
select Start timer > Start.
that you have set in the
background
■ Stopwatch
Show last — to view the most
You can measure time, take recently measured time if the
intermediate times, or take lap stopwatch is not reset
times using the stopwatch. During
View times or Delete times — to
timing, the other functions of the
view or delete the saved times
phone can be used. To set the
stopwatch timing in the
background, press the end key.
Using the stopwatch or allowing it
to run in the background when
using other features increases the
demand on battery power and
reduces the battery life.
14. Applications
15. Web
user certificates may also be saved shown, which may include the
in the security module by the amount and date.
service provider. Check that the header text is Read
To view the list of the authority or and that the digital signature icon
user certificates downloaded into is shown.
your phone, select Menu > If the digital signature icon does
Settings > Security > Authority not appear, there is a security
certificates or User certificates. breach, and you should not enter
is displayed during a any personal data such as your
connection, if the data signing PIN.
transmission between the phone To sign the text, read all of the text
and the content server is first, and select Sign.
encrypted.
The text may not fit within a single
The security icon does not indicate screen. Therefore, make sure to
that the data transmission scroll through and read all of the
between the gateway and the text before signing.
content server (or place where the
Select the user certificate you
requested resource is stored) is
want to use. Enter the signing PIN.
secure. The service provider
The digital signature icon
secures the data transmission
disappears, and the service may
between the gateway and the
display a confirmation of your
content server.
purchase.
Digital signature
You can make digital signatures
with your phone if your SIM card
has a security module. Using the
digital signature can be the same
as signing your name to a paper
bill, contract, or other document.
To make a digital signature, select
a link on a page (for example, the
title of the book you want to buy
and its price). The text to sign is
17. PC connectivity
You can send and receive e-mail, service provider. See ”Modem
and access the Internet when your settings” p. 49.
phone is connected to a The use of HSCSD services
compatible PC through a consumes the phone battery faster
Bluetooth or a data cable than normal voice or data calls.
connection. You can use your
phone with a variety of PC
connectivity and data
■ Bluetooth
communications applications. Use the Bluetooth technology to
connect your compatible Laptop to
■ Nokia PC Suite the Internet. Your phone must
have activated a service provider
With Nokia PC Suite you can that supports Internet access and
synchronize contacts, calendar, your PC has to support Bluetooth
notes, and to-do notes between PAN (Personal Area Network).
your phone and the compatible PC After connecting to the network
or a remote Internet server access point (NAP) service of the
(network service). You may find phone and pairing with your PC
more information and PC Suite on your phone automatically opens a
the Nokia Web site at www.nokia- packet data connection to the
asia.com/support or your local Internet. PC Suite software
Nokia Web site. installation is not necessary when
using the NAP service of the
■ Packet data, HSCSD, phone.
and CSD See ”Bluetooth wireless
With your phone you can use the technology” p. 48.
packet data, high-speed circuit
switched data (HSCSD), and circuit ■ Data communication
switched data (CSD, GSM data) applications
data services. For availability and
For information on using a data
subscription to data services,
communication application, refer
contact your network operator or
to the documentation provided
with it.
■ Headsets - Wired
Headset
Nokia Fashion Stereo
Headset HS-31
The Nokia Fashion Stereo Headset
provides a convenient handsfree
facility and the pleasure of
listening to your compatible Nokia
phone's FM radio or MP3 player in
stereo.
■ Memory card
Nokia 512 MB microSD
Card MU-28
This microSD Card provides 512
MB of removable storage and
increases the available memory for
data, music and software
applications.
• Hold the device to the ear opposite including installed or portable wireless
the pacemaker to minimize the equipment in the area over the air bag
potential for interference. or in the air bag deployment area. If in-
If you suspect interference, switch off vehicle wireless equipment is
your device, and move the device away. improperly installed and the air bag
inflates, serious injury could result.
Hearing aids Using your device while flying in
Some digital wireless devices may aircraft is prohibited. Switch off your
interfere with some hearing aids. If device before boarding an aircraft. The
interference occurs, consult your use of wireless teledevices in an
service provider. aircraft may be dangerous to the
operation of the aircraft, disrupt the
■ Vehicles wireless telephone network, and may
RF signals may affect improperly be illegal.
installed or inadequately shielded
electronic systems in motor vehicles ■ Potentially explosive
such as electronic fuel injection environments
systems, electronic antiskid (antilock) Switch off your device when in any
braking systems, electronic speed area with a potentially explosive
control systems, and air bag systems. atmosphere and obey all signs and
For more information, check with the instructions. Potentially explosive
manufacturer or its representative of atmospheres include areas where you
your vehicle or any equipment that has would normally be advised to turn off
been added. your vehicle engine. Sparks in such
Only qualified personnel should service areas could cause an explosion or fire
the device, or install the device in a resulting in bodily injury or even death.
vehicle. Faulty installation or service Switch off the device at refueling
may be dangerous and may invalidate points such as near gas pumps at
any warranty that may apply to the service stations. Observe restrictions
device. Check regularly that all on the use of radio equipment in fuel
wireless device equipment in your depots, storage, and distribution areas;
vehicle is mounted and operating chemical plants; or where blasting
properly. Do not store or carry operations are in progress. Areas with
flammable liquids, gases, or explosive a potentially explosive atmosphere are
materials in the same compartment as often but not always clearly marked.
the device, its parts, or enhancements. They include below deck on boats,
For vehicles equipped with an air bag, chemical transfer or storage facilities,
remember that air bags inflate with vehicles using liquefied petroleum gas
great force. Do not place objects, (such as propane or butane), and areas
where the air contains chemicals or
particles such as grain, dust, or metal call. Consult this guide or your service
powders. provider for more information.
When making an emergency call, give
■ Emergency calls all the necessary information as
Important: Wireless phones, accurately as possible. Your wireless
including this device, operate device may be the only means of
using radio signals, wireless communication at the scene of an
networks, landline networks, accident. Do not end the call until
and user-programmed given permission to do so.
functions. Because of this,
connections in all conditions
cannot be guaranteed. You
should never rely solely on
any wireless device for
essential communications
like medical emergencies.
J N
navigation 26
junk folder 34
navigation key 47
navigation key. See scroll key.
T
take an image 60
text 25
text message 27
text phone 53
themes 45
time settings 46
to-do list 67
tones 45
traditional text input 25
U
unlock keypad 22
UPIN 17
V
vehicles 87
video clip 60
voice
commands 47
dialing 23
messages 37
recorder 64
volume key 19