Professional Documents
Culture Documents
Hydraulic Pressure Sensor
Hydraulic Pressure Sensor
OVERVIEW
American Sensor Technologies, Inc. (AST) supplies pressure sensors, transducers, and transmitters for hydraulic pressure measurement applications. The most popular product is the AST4000 series. It is constructed using ASTs Krystal Bond Technology. The sensor is constructed taking a single bar of high strength stainless steel, machining the threads and hex on the outside, then drilling the center. This MEMS technology has the thickest diaphragm in the pressure sensor industry. Combining this feature with strain gages that offer a high raw output signal, the AST sensor can be packaged with excellent proof (4X) and burst pressure (10X) capabilities, high cycle life, and long-term stability.
TM
APPLICATIONS
Fork Lifts Scissor Jacks Man Lifts Pumps Accumulators Valve Controls Trash Compactors Test Stands
www.astsensors.com
American Sensor Technologies 450 Clark Dr., Mt. Olive, NJ 07828 phone (973) 448-1901 fax (973) 448-1905 email: info@astsensors.com
TM
ENVIRONMENTAL
A customer can package the sensor with the electronics sealed from the outside environment. Known as Sealed Gauge, the pressure sensor is calibrated to the barometric pressure of the date of calibration. This will prevent moisture and dust from entering the pressure sensor for gauge pressure sensors. Because gauge pressure Common Option Codes For AST Pressure Sensors sensors are referenced Option Code Description to the atmosphere, they 009 Sealed Gauge Reference 117 Internal Restrictor Plug typically breath through 129 4X Proof Pressure a vent tube in the cable Internal Restrictor Plug and 165 jacket or through a hole Sealed Gauge Reference 4X Proof Pressure and Sealed in the connector. Sealing 212 Gauge Reference the pressure sensor is 4X Proof Pressure and Internal 262 Restrictor Plug common for hydraulic 4X Proof Pressure, Sealed applications because the 367 Gauge Reference, and Internal Restrictor Plug pressure ranges are high enough that the difference in barometric pressure from location to location and day to day is insignificant as a percentage of the measurement range. The better trade-off is to protect the sensor from humidity, dust, icing, and high pressure wash-down.
ELECTRICAL The product features a welded housing, to shield from electrical interference and protect the electronics of the sensor from application environments and tough installations. The electronics of the pressure sensor also have EMI (Electromagnetic Interference) and RFI (Radio Frequency Interference) protection to the latest CE standards for industrial equipment.
www.astsensors.com
American Sensor Technologies 450 Clark Dr., Mt. Olive, NJ 07828 phone (973) 448-1901 fax (973) 448-1905 email: info@astsensors.com