Professional Documents
Culture Documents
TVB
TVB
M O V E M E N T
Tesamoll seal
Exhaust air
pt (N/mm2) = Pressure loss = Flow rate V (m3/h) 10 (N/m2) or 10 (Pa) 1 (kp/m2) or 1 (mm water column)
The Schako disc valve is an up-to-date design. It is characterized in particular by high pressure drop with as little air noise as possible. Unsightly dirt rings are prevented by the relatively high inflow ring. Construction: Sheet steel with epoxy resin powder coating Colours available: Stone grey RAL 7035 White RAL 9010 Black RAL 9005 Tender description: Epoxy resin powder coated sheet steel disc valve, with high pressure drop and low noise generation. Size 100. Specimen order: 10 TVB-100, RAL 9010
Stand: 01.11.2003
Disc setting
Tesamoll seal
Exhaust air
pt (N/mm2) = Pressure loss = Flow rate V (m3/h) = for room absorption LA [dB(A)] = of 10 m2 sabine 10 N/m2) or 10 (Pa) 1 (kp/m2) or 1 (mm water column)
The TVB 150 disc valve is identical to the TVB 100 disc valve. Construction: Sheet steel with epoxy resin powder coating Colours available: Stone grey RAL 7035 White RAL 9010 Black RAL 9005 Tender description: Epoxy resin powder coated sheet steel disc valve, with high pressure drop and ow noise generation. Size 150. Specimen order: 10 TVB-150, RAL 9010
Stand: 01.11.2003
TVB-F 100 and TVB-F 150 disc valves for exhaust air
Tesamoll seal
The TVB-F disc valve is identical to models TVB 100 or TVB 150. Instead of the mounting ring, three springs are fitted for securing the va ve directly in round ducts. It should, however, be noted that a spring-mounted disc valve should only be installed in walls, not in the ceiling, for safety reasons. Specimen order: 10 TVB-F 150, RAL 9010
Stand: 01.11.2003