Professional Documents
Culture Documents
Acting Type
S
Explosion Proof
m ExdmIIBT5 n Non-Explosion
Lever Type
1 8~35mm 2 20~40 mm 3 30~70 mm 4 60~100 mm 5 110~150 mm
Orifice Type
1 1 2 2 3 None
Connection Type
1 PT 2 NPT
Ambient Temp
S -20~60 H -20~120 L -40~70
Single Acting
D Double Acting
Specifications
Item.Type Input Signal Impedance Supply Pressure Stroke Air Connection Gauge Connection Conduit Explosion Proof Protection Ambient Temp Linearity Hysteresis Sensitivity Repeatability Air Consumption Flow Capacity Material Weight = Single Double 4-20mA DC 25015 Ohm 1.4~7kgf/ (20~100psi) 10~150mm PT (NPT) 1/4 PT (NPT) 1/8 PF 1/2 (G1/2) Ex dm IIB T5 Ex dm IIC T5 Ex ia IIB T6 IP66 -20~70(Operating) -20~60(Explosion) 1% F.S. 0.2% F.S. 2% F.S. 0.5% F.S. 1% F.S. 0.5% F.S. 3LPM (Sup=1.4kgf/, 20psi) 80LPM(Sup=1.4kgf/, 20psi) Aluminum Diecasting 2.7kg(6.1Ib)
The Electro-Pneumatic Positioner MH-700(L) is used for operation of pneumatic linear valve actuators by means of electrical controller or control system with an analog output signal of DC 4 to 20 mA or split Ranges. There is no resonance at 5~200Hz. The change of RA/DA Action is convenient, it is able to apply to single or double acting actuator. It is possible to prevent the hunting with orifice to the small size actuator. It is economical due to less air consumption. It is able to control the 1/2 split range with simple operation without replacement of parts.
- 16 -