You are on page 1of 1

How to Remove 'Produced by an Autodesk Educational Product' Plot Stamp Follow this steps: 1.

Open the affected drawing 2.Type dxfout in the command prompt 3.Save the dxf in the location you can easily access 4.Now, type dxfin in the command prompt 5.Browse the file you save in step 3 6.Save the file as dwg The Produced by an Autodesk Educational Product should be removed upon completio n of the steps above. If the educational product plot stamp still appears, check the xref file and app ly the steps I ve mentioned above.

You might also like