Professional Documents
Culture Documents
Page 1
1997 2001 DASSAULT SYSTEMES
Tutorial Objectives
Description
? This Tutorial is an introduction to Assembly Drafting.
Message
? To show how CATIA V5 allows the user to automatically generate associative drafting from 3D mechanical assemblies produced with CATIA V5. ? To show a higher productive environment for drawings dress-up and annotation
Duration
? 45 minutes
Product Coverage
? Assembly Design, Generative Drafting
Page 2
Step 1
? Preparing the assembly
Step 2
? Generating projection views
Step 3
? Generating a section view
Step 4
? Adding dimensions
Step 5
? Creating an isometric view
Step 6
? Generating an exploded view
Step 7 Step 8
? Inserting a bill of material
1997 2001 DASSAULT SYSTEMES
? Generating balloons
Page 3
Settings 1/2
Depending on your needs, you may have to modify the CATIA V5 settings (units, default directory, visualisation parameters, etc) In order to use the appropriate settings for this tutorial, you have two possibilities:
Settings 2/2
For this tutorial you also need to install a material catalogue: ? Do not do this step if you have already done it in getting started or in a previous tutorial
? Copy the ..\Getting Started\Catalog.CATMaterial file under ..\Program Files\Dassault Systemes\M07\intel_a\startup\materials\French directory ? Copy the ..\Getting Started\Catalog.CATMaterial file under ..\Program Files\Dassault Systemes\M07\intel_a\startup\materials\German directory ? Copy the ..\Getting Started\Catalog.CATMaterial file under ..\Program Files\Dassault Systemes\M07\intel_a\startup\materials\Japanese directory ? Copy the ..\Getting Started\Catalog.CATMaterial file under ..\Program Files\Dassault Systemes\M07\intel_a\startup\materials directory
1997 2001 DASSAULT SYSTEMES
Page 5
? Opening the assembly ?In the menu bar select File/Open ?Select 250mm Speaker.CATProduct file and click on Open button ? Choosing the Visualisation mode ?In the menu bar select View/Render Style/Customize View
? Check Edges points, Shading and Materials boxes ? Click on OK button
Page 6
? Changing of workbench ?In the menu bar select Start/Mechanical Design/Assembly Design
Page 7
? In the properties for the Bill of Material section click on the Hide all properties icon ? In the Properties for the Recapitulation section, select Number and click on Show properties icon ? Click on OK button
Page 8
Page 9
?Expand the specification tree ?Select in the specification tree the Voicecoil part
?The 3D compass turns to green and is snapped automatically onto the part
?Drag the compass u/x axis to move the voicecoil part inside the basket as shown in the picture ?Select in the specification tree the Former part
1997 2001 DASSAULT SYSTEMES
?Drag the compass u/x axis to move the Former part on the left of the basket part as shown in the picture
Page 10
?Select in the specification tree the Spider part ?Drag the compass u/x axis to move the Spider part on the left of the Former part as shown in the picture ?Select in the specification tree the Diaphragm part ?Drag the compass u/x axis to move the Diaphragm part on the left of the Spider part as shown in the picture
1997 2001 DASSAULT SYSTEMES
Page 11
?Select in the specification tree the Surround part ?Drag the compass u/x axis to move the Surround part on the left of the Diaphragm part as shown in the picture ?Select in the specification tree the Dustcap part ?Drag the compass u/x axis to move the Dustcap part on the left of the Surround part as shown in the picture
1997 2001 DASSAULT SYSTEMES
Page 12
?Select in the specification tree the Magnet part ?Drag the compass u/x axis to move the Magnet part on the right of the Basket part as shown in the picture ?Select in the specifications tree the Pole Piece part ?Drag the compass u/x axis to move the Pole Piece part on the right of the Magnet part as shown in the picture ?Click on Exit from scene icon
?The scene is now stored in the assembly tree under the Applications/Scene branch
Page 13
?De-activate the Sketcher Grid icon from the bottom tool bar ?Click on Front View icon
Page 14
? Select Window in the menu bar ? Select 250mm Speaker.Product ? In the 3D geometry select the planar face of the Basket part ? Click on the sheet to generate the view
?Drag the red frame of the Front view (with MB1) to the lower left corner of the sheet ? Generating a left view ?Click on Projection View icon
1997 2001 DASSAULT SYSTEMES
? Move the mouse cursor on the right of the front view and click on the sheet to generate the view
Page 15
? Generating a back view ?Double click on the blue frame of the left view
?The frame turns to red, meaning that it is the active view
Page 16
Page 17
? Double-click to end the cutting profile creation ? Maximize the drawing window by clicking on maximize button ? Zoom out to see the whole page ? Move the mouse cursor above the front view and click to generate the view
? Double-click the section view frame to activate it ? MB3 click on the section view frame (or in the tree) ? In the contextual menu select Section view AA object & Overload Properties
? Select the spider geometry on the section view (zoom in if necessary) ? Click on Edit button ? In the Editor panel uncheck the option Cut in section views ? Click on OK button ? Click on OK button to close the Characteristics panel
?The spider element is no more cut in the section view
Page 18
? Moving the mouse cursor, drag the dimension to a location above the speaker geometry and click on the sheet
Page 19
? Moving the mouse cursor, drag the dimension to a location below the speaker geometry and click on the sheet
? Select the horizontal edge of the basket ? Select the horizontal edge of the pole piece
?You get a 132.8mm distance dimension
? Moving the mouse cursor, drag the dimension to a location on the right of the speaker geometry and click on the sheet ? Select the horizontal edge of the basket ? Select the horizontal edge of the basket ? Moving the mouse cursor, drag the dimension to a location on the right of the speaker geometry and click on the sheet
?You get a 10.8mm distance dimension
Page 20
Finally, you should have the following 4 dimensions on the section view ?Click on the yellow arrow at the top right of your toolbars ?Zoom out to see the whole page
Page 21
?Double-click on the blue frame of the front view to activate it ?Click on Dimensions icon (dimensioning toolbar) ?Zoom in and select the upper right external circle as shown ?Click on the sheet to create the dimension ?In the top toolbar, click on the second Dimension Line (dimension properties toolbar) icon to change the dimension line type ?MB3 click on the dimension
1997 2001 DASSAULT SYSTEMES
? Select Properties ? Select the Dimension Texts tab ? In the first field of the Associated Text area key in 6 X ? Click on OK button
Page 22
? You get the diameter dimension as shown on the figure ? Click on Centre Line with Reference icon (Dress Up toolbar)
?Please refer to the Getting Started scenario to extract the non visible toolbars due to the display settings of your screen. You have to drag and drop the bottom right toolbars until you find the needed one.
? Select the same circle as the one used before for the dimension creation ? Select any concentric circle of the view as a reference
Page 23
Page 24
? Generating an isometric view ?Click on New Sheet icon ?In the menu bar select Windows/Tile Horizontally ?In the 3D window, rotate the assembly to get a view as shown on the right ?Click in the drawing window ?Click on Isometric View icon (views toolbar)
? Move the mouse cursor over the 3D geometry till an axis is displayed. When you get this axis click with mouse button 1 ? In the drawing window, click anywhere on the sheet to generate the view
?Move the isometric view to to the upper right corner of the sheet
Page 25
? Generating an exploded view ?In the lower left corner of the 3D window, double click on the Explode window to open it ?If no geometry is visible in the window, click on Fit All In icon ?Click anywhere in the drawing window ?Click on Isometric View icon
? In the specification tree click on Explode ? Click any planar face, the magnet face for example ? In the drawing window click anywhere on the sheet to generate the exploded view ? With mouse button 1 move the blue frame of the exploded view to the left as shown in the picture ? Maximise the drawing window by clicking on maximize button
Page 26
? Activate the exploded view with a double click on the blue frame of the view ? Click on Generate Balloons icon (Generation Toolbar) ? Using MB1 move all balloons except B above geometry ? Multi-select (Ctrl Key)all balloons except B ? In the menu bar, select Tools/Positioning/Element Positioning
1997 2001 DASSAULT SYSTEMES
Page 27
Page 28
? In the menu bar select Insert/Generation/Bill of Material ? Click a point on the bottom right corner of the sheet to insert the bill of material
?You can still move the table after the generation by dragging it with MB1
Page 29
? Adding a title block ?In the menu bar select File/Page Setup
? In the Page Setup panel select All sheets in the list ? Click on Insert Background View button ? Click on Browse button ? Select A0 Title Block.CATDrawing file ? Click on Open button ? Click on Insert button ? Click on OK button in the Page Setup panel
?A previously defined A0 title block is inserted in the background view of the two drawing sheets
1997 2001 DASSAULT SYSTEMES
?In the menu bar select Edit/Background ?Double click on XXX characters in the DESIGNED BY area
? In the Text editor panel, key in your name ? Click on OK button
Page 30
Manual Settings
Page 31
1997 2001 DASSAULT SYSTEMES
? Setting the CATIA options ?Start CATIA V5 ?In the menu bar select Tools/Options ?Select Mechanical Design/Drafting chapter and Layout tab
? Check/uncheck the boxes as shown in the picture
Page 32
Page 33
Congratulations
Page 34
1997 2001 DASSAULT SYSTEMES