rr) se ec : TEAMTEC MARINE PRODUCTS
VPN Uae ee Sy
es Our Seas!
Co
BTU)
PO.Box 203 N-490:
ck cod““\ Teamilec
VY MARINE PRoDUCTS
To whom it may concern:
‘Technical updates for your Team‘Tec incinerator.
Your ref. Project: Date:
Software development ID: Incinerators 24.11.2009
‘TeamTec incinerators have been in service since 1972. During this period of time a large number
of incinerator has been produced, installed, operated and maintained. For the last decade the
incinerators rely completely on an advanced PLC programme. The software used for operating the
PLC unit is under constant change and improvement development.
Since 2001 TeamTec has made a number of changes, after implementing customer feedback,
service engineer feedback and general findings from in house testing. All these changes result in a
perfect product that is optimised for each and every day. 80% of the software changes are
implemented to cope with the ever changing sludge quality and on board processes that lead to
‘the burning of sludge.
Sludge is a very interesting subject. Water content both free water content and emulsification
between water and sludge oil (undrainable water content) are changing constantly. After years of
experimenting TeamTec now has developed a new software that will cause the PLC to self adapt
to the sludge water content and burn while using as little diese! oil as possible.
‘TeamTec is pleased to announce that this software now is available as an easy upgrade for all
incinerators produced since 2001 and up.
The following advantages can be noted:
- Update to latest software development level.
- Lower Diesel oil usage
= Will bum sludge with varying water content up to 50%, and solve a number of problems
experience over the years.
- Can be installed by crew easily just by changing an E-prom
- Save money, use less diesel, perform optimal burning of sludge with different quality.
= PRICE: Nok 4500,- (appr. US: 749,-) ex. works
Best regards, for TeamTec AS
Erik Mostert, Technical Manager
Please fill out the feed back form (see other side!), and send to our spare parts department using the
following contact information:
TeamTee AS
P.O. Box 203
N-4902 TVEDESTRAND
+47-37199800
E-mail: spares@jteamtec.no
"TeamiTos AS Phone” +(47) 37 1986 00 Bank Sparebarken Sar AGSNoS! NOK NOTS2526 05 09413
P.0 Box 208 Teletax: +{47) 37 1998 90 Senvcobex 602 USD: NO302818.04.50531
N-4902 Tvedestrand —E-mal!_ offi no IN-4801 Arendal, Norway EUR: NOB62818 60.5039
Nomay lotesnett: www teamtecra Swit: AASPNO2?
Org.No NOST4 388472 MVA Telefax: +(47) 37 02 41 50,“STeamilec
Farin enoovcrs
FEEDBACK FORM FOR ORDERING SW UPGRADE FOR YOUR TEAMTEC
INCINERATOR: In order to know what kind of incinerator currently is on board the vessel
and for TeamTee to provide you with the correct software upgrade, we need the following
information:
1) SERIAL NUMBER. This can be found on the NAME PLATE of the incinerator.
Serial Number on
your incinerator:
1) Press Enter: «
2) Press
3) Select and Enter =!
‘The screen now shows like the picture to the left.
Please write down the following from the SCREEN:
PLS: PLSXXXXX:
DISPLAY: DISXXXXX:
XXX KK:
For customer use:
1 Yes I am interested in a SW Upgrade. Please contact me at:
E-mail: .
Phone: _ = Addr
(No Iam not interested in a SW upgrade, but contact me for other issues.