Professional Documents
Culture Documents
Rule #4- Always leak check the regulator & torch assembly
Rule #5- Always use an approved pressure regulator on an acetylene fuel tank
When the job is finished remove the pressure regulator from the fuel tank
Rule #6- Always Secure the fuel tank while using the torch
Precaution :
While lightning torch first open acetylene, light torch, then open oxygen. While shutting off torch, first close acetylene, then oxygen. Do not clamp hose with wire / capillary. This may cut hose. Use hose clamp. Use torch lighter only. Never use lighted cloth / cotton waste for lightning torch. Store cylinder in cool & dry place. Clamp cylinders on cylinder stand with strong chain. Hose length should be sufficient, to make work area away from cylinders. Fire extinguisher / sand bucket / water bucket should be always available. Do not temper with gas regulator or pressure gauge. Use only cylinder key for opening / closing the cylinder.