Professional Documents
Culture Documents
Burner Manifold Burner Manifold Air Water to Smoke Suppressor Gas Water Separator Burner Oil SSV Actuator Pressure Surface Safety Valves Flowline Manifold* Water Header Pump Surface Test Tree Manifold Tuning Head Swivel Water to Heat Shield Gas Air Water to Smoke Suppressor
Oil
Burner
Choke Manifold
! ! ! ! ! ! ! ! ! ! ! ! !
Above introductory figure shows typical well testing layout for a very complete set of equipment. The equipment requirements and design for successful well testing obviously vary according to the specific requirement of operators.
PARVEEN
Capacity : Features :
12000 BOPD Designed to dispose off crude oil /diesel, pollution free Pilot ignition system for each burner head. Consist of Atomizers for multistage automization. Specially designed nozzle and high velocity of effluent gives flame narrow shape , resulting in reducing heat radiation. Flow rates up to 12,000 STBD at any water percentage. Swivel provided in structure allows a rotation in 30 each side of boom axis. Total length of boom available : 60' - 75' - 90' in 2 - 3 sections Booms comprises of : Oil line 3 SCH 80 Gas line 4' / 5 SCH 80 Air 2 SCH 40 Water line 3 SCH 40 Diesel line 1.50 SCH 40 Relief Line 4 SCH 40 Propane line SCH 40 Electric cable Material of construction : Suitable for H2S Service asper NACE MR-01-75
PARVEEN
Gauge Tank Capacity : 100 BBL ( Twin Compartment) Features : Supplied with Centrifugal pump with electric driven motor (chemical proof) w/ HP Flame proof console. Complete with piping, flanges, valves , instrumentation & union Connections.
Surge Tank Capacity : 100 BBL (Twin Compartments) Features : Design pressure : 150 PSI / W.P. : 50 PSI Magnetic level controllers with High/Low level alarm. Complete with piping, flanges, valves, instrumentation & union connections With automatic control valve to control pressure in tank up to 50 psi. Supplied with Centrifugal pump with electric driven motor (chemical proof) w/ HP Flame proof console.
PARVEEN
2.1/16 x 5000 PSI CWP - 3.1/8X 5000 - 3.1/16 -10000 PSI CWP Construction : Skid mounted suitable for H2S Service asper NACE MR-01-75. Complete with 8 Gate Valves / Adjustable & Positive Chokes, 2 / 3 Thru bore. Orientation of Gate Valves, Chokes asper customer requirement. With provision for measuring pressure, temperature & sampling both Upstream & Downstream of chokes.
Eruption Manifold
3.1/16 x 10000 PSI CWP Construction : Skid mounted - Unitized type. Suitable for H2S Service asper NACE MR - 01- 75. Complete with two side outlets one for connection to Kill line & other for production testing.
Suitable for H2S Service asper NACE MR-01-75. With Union / Gray Lock End Connections. Supplied with multiple ports Plugged or Flanged at specified intervals and degrees.
Data Header