‘Votal Pages—S
_ta
z %
“Use (2) Thevenin’s <
principle of Superp:
a 202 resistor Connected
circuit shows in Fig.
excited
45s.
_ @ COiL A having resistance R, and inductance Ly :
. the current taken and power consumed are 8A
and 120 W respectively. When applied to a coil
B having resistance Rj and inductance L,, the
current taken and power consumed are 10 A and
SOOW respectively. What current and power
will be taken when 100 V is applicd across these
connected in series ?
two coi
Whree identical impedances are connected in star
across a 440 V,, 3-phasc. SO Hz supply. The line
current is 40 A and the p-f. is 0-8 leading. Find
the value of resistance and capacitance in cach
phase. -
(a)> Am electromagnet has an air-gap o! ieneth
invade poab oer tae ‘Sf lerigth 30 em. ue
LO
10c 4)
(4) The cddy current loss in a cold rolled grain
oriented silicon steel sheet is LOO W when
the supply frequency is 50c/s. Find the
eddy current loss when the frequency is
40 ¢/s, the flux density remaining the same.
6. (2) Explain the principle of operation of a 5
ngle-phase transformer. a
(4) The emf per turn of a single-phasc.
6600 V/440 V, SO Hz transformer is 12-V
Calculate
(7) the number of turns in the primary and
secondary windings ;
(7) the net cross-sectional area of the core
° for a maximum flux density of
1-5 Wb/m?. 6
(2) “What are the different methods of speed
control of d.c. shunt moter ? 2
BoTech/ REG 1003 (Continued
vi“Ee Ss) $
é
(6) A 500V dic. shunt motor has a speed of
1200 rpm, the line current being SA. Find +
the speed when line current increases to +g
BOA. The shunt ficld resistance and
Past armature resistance are 250 and 1-162
respectively 8
SB. (2) State the indicating Gnd int
instruments that you have siiudicet. 3
(2) A moving coil instrument has # resistance
of 7-5@ and its full scale deflection