Fix the problem so that the output of show standby On R22 and R23 is the same as show below. Question is same but pre-configuration and the problem is different. You should check if the rp address is correctly configured on R3, R2 and R8.
Fix the problem so that the output of show standby On R22 and R23 is the same as show below. Question is same but pre-configuration and the problem is different. You should check if the rp address is correctly configured on R3, R2 and R8.
Fix the problem so that the output of show standby On R22 and R23 is the same as show below. Question is same but pre-configuration and the problem is different. You should check if the rp address is correctly configured on R3, R2 and R8.