Crosscut and Mitre Saw KGS 300 has been designed to perform the following cutting operations: - crosscutting of ledges and battens, boards, particle boards and block boards having a square or rectangular cross section not for round stock unless a suitable jig is used. - cutting of non-ferrous metals with special saw blade (stock-no. 091 001 0204, available as optional accessories).
Crosscut and Mitre Saw KGS 300 has been designed to perform the following cutting operations: - crosscutting of ledges and battens, boards, particle boards and block boards having a square or rectangular cross section not for round stock unless a suitable jig is used. - cutting of non-ferrous metals with special saw blade (stock-no. 091 001 0204, available as optional accessories).
Crosscut and Mitre Saw KGS 300 has been designed to perform the following cutting operations: - crosscutting of ledges and battens, boards, particle boards and block boards having a square or rectangular cross section not for round stock unless a suitable jig is used. - cutting of non-ferrous metals with special saw blade (stock-no. 091 001 0204, available as optional accessories).