You are on page 1of 1

For missing corrupt hal.dll, follow the steps below: In ur BIOS set CD-ROM has 1st Boot Device.

Insert XP Setup CD, to boot from CD. After the intial loading of drivers is over, on the Welcome to Setup Screen with 3 options; Press R key, to "Repair XP installtion using Recovery Console". On the next screen you will be asked to choose your Windows installtion, choose the one that is causing the problem by typing the number beside it. You will be prompted for Adminstrator account's password. Press Enter if the password was blank. Type the following commands, and press enter after each one: Attrib -H -R -S C:\Boot.ini (where C: is the partition where XP was installed) DEL C:\Boot.ini BootCfg /Rebuild Fixboot

You might also like