Professional Documents
Culture Documents
Page 1 of 1
show the entry list No online connection with STEP 7-Micro/WIN after installing STEP 7 V5.1 + SP2 Display part number QUESTION: After installing STEP 7 V5.1 + SP2 I can no longer set up an online connection under STEP 7Micro/WIN 32. What should I do? ANSWER: After installing STEP 7 V5.1 + SP2 you can no longer set up an online connection under STEP 7Micro/WIN 32. Technical background: Basically the two programs are independent of each other and can be installed and operated in parallel. After installing STEP 7 V5.1 + SP2 however, there is a conflict at your PC/PG interface. Remedy: If the behavior described occurs, then please install the Service Pack 2 for STEP 7-Micro/WIN 32. Service Pack 2 is available in Entry ID 8578380. Keywords: Connection setup, Compatibility Entry ID:9614466 Date:2001-12-07 I regard this article.... Copy link
Print Siemens AG 2010 - Corporate Information - Privacy Policy - Terms of Use
as helpful
http://support.automation.siemens.com/WW/llisapi.dll/9614466?func=ll&objId=9614466... 10.09.2010