Professional Documents
Culture Documents
Raftertm
Raftertm
1 TIMBER RAFTER DESIGN RAFTER DESIGNATION : LOADINGS Total Udl Load (S.L.S, F=1.0) Rafter Spacings Designed Udl Load (S.L.S., F=1.0) Span Length, Ls Cantilever Length, Lc Moment (S.L.S) Span moment Support moment Cantilever moment Max designed moment Shear (S.L.S) Shear from cantilever Max shear Reaction Load at Simple Support Reaction Load at Cant. Support = = = = = 1.20 kN/m 600 mm 0.72 kN/m 5,000 mm 1,000 mm
2
= (w*L/2) = 1.80 kN = (w*L)*1.25 0.90 kN = 1.80 kN = = B 75 x * * * * * * * * = = = = = = = = 1.80 kN 2.70 kN D 150 200.37 cm 95.77 cm 1,363.00 cm 311.00 cm
3 3 4 4 2
Rafter Section Selected : 1. Zx-x 2. Zy-y 3. Ix-x 4. Iy-y 5. Area, Ao 6. Radius of gyration, ry-y 7. Young Modulus, E Allowable stress, Fbt
88.40 cm 18.76 mm
181,305
Req'd (OK)
c:\catan\design\93121654.xls.ms_office
4/17/2012
2 Check Deflection At Span Total Udl L.L Factor Udl Due to L.L. only Deflection, d(span) = = = = = 0.72 0.60 0.43 384 4.41 kN/m kN/m * (w*L*L*L*L)/(E*I) mm < L / =
1 /
(OK)
At Cantilever End Udl Due to L.L. only Deflection, d(cant) = = = 0.43 kN/m 8 * (w*L*L*L*L)/(E*I) 0.34 mm < L / =
1 /
(OK)
Check Stresses At Simple Support Designed Shear Shear area prov, Ao Actual shear stress, fq At Cantilever Support Shear stress, fq Bending stress, fbt Combined stress = = = 0.20 N/mm 7.49 N/mm 0.20 + 1.03 0.20 + 0.80 <
2 2
= = =
<
= =
c:\catan\design\93121654.xls.ms_office