You are on page 1of 2

CARA SETTING DLINK DIR - 615

If you're in windows VISTA/XP/Whatever right now and you've somehow arrived to this page using google then welcome, cause these steps 1-4 are exactly the same in vista/XP! 1. Log in via http://192.168.0.1 (default "username: Admin and no pass") 2. Go to setup tab ----> internet ----> internet connection wizard 2.1 CHANGE PASSWORD ! click next 2.2 chose time zone (you know where you are) 2.3 Configure your Internet Connection DHCP Connection (Dynamic IP Address) Choose this if your Internet connection automatically provides you with an IP Address. Most Cable Modems use this type of connection. 2.4. press "clone your computer's MAC address" ; hostname: 'your computer name in ubuntu' ( mine is "grobar" yours is ..... ) 3. Go to setup tab ----> wireless settings ----> Wireless Network Setup Wizard (after this we're gonna do manual settings) 3.1 give your network a name= SSID (e.g. 'grobar') 3.2.Automatically assign a network key (Recommended) and chose WAP or WAP2 3.3 Write down the network key!!! Or do printscr and save this page. Right here you're pretty much set but please do step 4 as well!!! 4. Go to setup tab ----> wireless settings ---->Manual Wireless Network Setup 4.1 Wireless Network Settings Enable Wireless : ALWAYS Wireless Network Name : (Also called the SSID) the name you gave in 3.1 802.11 Mode : chose "mixed 802.11n,g and b" Enable Auto Channel Scan : YES Wireless Channel : AUTO Transmission Rate : BEST (Mbit/s) Channel Width : AUTO 20/40 MHz Visibility Status : !!!Invisible!!! (so that no outsiders know your SSID except you) 4.2 Wireless Security Mode : WPA-Personal 4.3 WPA mode: WPA2 only Cipher type: AES Group key update interval : 3600 seconds

4.4 Pre-Shared Key : the one that you generated (and wrote down somewhere) in 3.2. , you can change this key if you want but I suggest to leave it as is...

OK, now you're all set but if you did step 4, you can't see your network cause its status is set to invisible. So go to the upper right corner on your ubuntu desktop: click on the computer icon, click enable networking,click enable wireless and the click connect to other network. Now you enter: your SSID name that you entered in 3.1 wireless security: WPA2 personal type: AES enter password that you've generated in 3.2 (or 4.4) ENJOY wireless in ubuntu hardy...

You might also like