International Institute of Information Technology Computer Aided Structural Engineering CASE Workshop Final Project
November 16, 2011
1. Construct a 3D tower as shown in gure 1. Using SAP answer the following? Create a 3D model Assign ISMB 300x300 section for all the members Assign the lateral loads to the members as shown in gure 2. Calculate the reaction at supports, deected prole of structure Calculate the axial forces in the mebers Find out the mode shapes(atleast 5) and fundamental period of the structure Calculate the displacement, velocity and acceleration time histories for the structure when structure is subjected to Uttarkasi ground motion.
* Note: Assume the parameters if required.
(a)
(b)
Figure 1: (a)Geometry details (b) Structure is subjected to lateral loads
ChatGPT Money Machine 2024 - The Ultimate Chatbot Cheat Sheet to Go From Clueless Noob to Prompt Prodigy Fast! Complete AI Beginner’s Course to Catch the GPT Gold Rush Before It Leaves You Behind
The Complete HVAC BIBLE for Beginners: The Most Practical & Updated Guide to Heating, Ventilation, and Air Conditioning Systems | Installation, Troubleshooting and Repair | Residential & Commercial