You are on page 1of 4

Characterization of Digital

Two types of Digital


(1) Binary Weighted Resistor DAC
(2) R-2R Ladder DAC
Use the
BWRDAC and
Figure-1
Figure-2
Characterization of Digital
Two types of Digital
Binary Weighted Resistor DAC
2R Ladder DAC
the WSPICE Circuit Simulation Tool (
BWRDAC and R2RDAC.
1 Binary Weighted Resistor DAC
2 Binary Weighted Resistor DAC
Computer Control Systems (ECE331)
Characterization of Digital
Two types of Digital to Analog Converters (DAC) are
Binary Weighted Resistor DAC
2R Ladder DAC (R2RDAC)
Circuit Simulation Tool (
R2RDAC.
Binary Weighted Resistor DAC
Binary Weighted Resistor DAC
Computer Control Systems (ECE331)
Characterization of Digital to
Activity 2
Converters (DAC) are
Binary Weighted Resistor DAC (BWRDAC)
(R2RDAC), in Figure
Circuit Simulation Tool (
Binary Weighted Resistor DAC
Binary Weighted Resistor DAC
Computer Control Systems (ECE331)
to Analog Converter
Activity 2
Converters (DAC) are:
DAC), in Figure
in Figure-2.
Circuit Simulation Tool (wspice3.exe
Binary Weighted Resistor DAC
Binary Weighted Resistor DAC
= V
out
Computer Control Systems (ECE331)
Analog Converter
in Figure-1, and
wspice3.exe) to simulate the operation of

\
|
+ b
R
V
b R
2
ref
3
Computer Control Systems (ECE331)
Analog Converters Using WSPICE
) to simulate the operation of
+
R
V
b
R
V
b
8 4
ref
1
ref
2
s Using WSPICE
) to simulate the operation of
|
.
|
+
R
V
b
R 16
ref
0
ref
s Using WSPICE
) to simulate the operation of
Warm-Up:
The BWRDAC4.CIR is the netlist for 4-Bit BWRDAC circuit and is provided as example.
Double-click to open:
WSPICE Window:
Open BWRDAC4.CIR in WSPICE to start the simulation.
File > Open
Simulation Result:
Exercise 1: 8-BIT Binary Weighted Resistor DAC
Write a SPICE netlist for 8-Bit BWRDAC.
Modify the BWRDAC4.CIR file and rename to BWRDAC8.CIR.
Run the simulation to generate the waveform.
Submit BWRDAC8.CIR together with this document.
Place here the snapshot of your simulation results.
Exercise 2: 8-BIT R-2R Ladder DAC
Write a SPICE netlist for 8-Bit R2RDAC and name as R2RDAC8.CIR.
Run the simulation to generate the waveform.
Submit R2RDAC8.CIR together with this document.
Copyright 2012
Characterization of Digital to Analog Converters Using WSPICE
Febus Reidj G. Cruz
Place here the snapshot of your simulation results.

You might also like