Professional Documents
Culture Documents
Untitled Extract Pages
Untitled Extract Pages
5/25/10
3:53 PM
Page 301
2010 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher.
5119. The symmetric tube is made from a high-strength steel, having the mean dimensions shown and a thickness of 5 mm. If it is subjected to a torque of T = 40 N # m, determine the average shear stress developed at points A and B. Indicate the shear stress on volume elements located at these points.
20 mm 60 mm
30 mm
A B
40 N m
(tavg)A = (tavg)B =
*5120. The steel used for the shaft has an allowable shear stress of tallow = 8 MPa. If the members are connected with a fillet weld of radius r = 4 mm, determine the maximum torque T that can be applied.
20 mm
50 mm
20 mm
T 2
T 2
Allowable Shear Stress: D 50 = = 2.5 d 20 From the text, K = 1.25 tmax = tallow = K Tc J and 4 r = = 0.20 d 20
T = 20.1 N # m
8(10)4 = 1.25 B p
t 2 (0.01) 4 R 2 (0.01 )
Ans.
301