Professional Documents
Culture Documents
Aito Requirments
Aito Requirments
2826/12. ESC; Castle Creations 45a Phoenix. Battery: Flight power EonX 30 2450mah 4s. Servos: Elevator and rudder Airtronic 94751, ailerons HD2216MG Propeller: APC 14x7 Receiver: Jeti, Duplex R6. RX powered from main 4s battery with Castle Creation 10 A Bec. patternship wings Modelling the wings and horizontal tail surfaces is much easier than the fuselag e. The airfoil is a modified NACA 64A012, with the trailing edge thickness of 7m m at the root and 4.5 mm at the tip. Modelling requirements: 4 X 5 cell 5000mah nano-tech 45c 2 X 4 cell 5000mah nano-tech 45c 1 X 80 Amp esc 1 X 14X7 propeller 1 X 12X6 propeller 4 X HD2216MG servo's an be the Turnigy 1 X 8mm Gold connecters 3 X Orange RX S-Spec 1 X 8mm Shaft Adapter 1 X 5mm Shaft Adapter