Professional Documents
Culture Documents
EN30B Steel
EN30B Steel
Print Friendly
|
Text only |
Site Map
home
products
quality
steel specifications
contact us
EN30B
Technical Data
EN30B is a 4% nickel air/oil hardening steel. It achieves a good through hardness with high strength and toughness. It is capable of taking a good polish and is widely used as a plastic mould steel. TYPICAL ANALYSIS C. Si. Mn 0.35% 0.25% 0.50%
Ni. 4.25%
Cr. 1.20%
Mo. 0.30%
Forging: Heat slowly and uniformly to uniformly to 1050C. After forging cool slowly. Annealing: Heat uniformly to 630/650C. Soak well and cool slowly in the furnace. Hardening: Pre heat slowly yo 650/700C and thoroughly soak. Continue heating to the final hardening temperature of 830/850C and allow the component to be heated through. Quench in oil or cool in air. Tempering: Heat uniformly and thoroughly at the selected tempering temperatures and hold for one hour per inch of total thickness. Tempering C HRc 150 49 47 250 44 350 38
search
sales@westyorkssteel.com
450
Available sections:
topics EN8 EN9 EN19 EN24 EN30B EN31 EN32 EN36 EN40B EN41 EN43 EN45 EN47 manganese steel EN14 EN16 EN26 SAE 8620 AISI 4140 AISI 4145 AISI 4130 AISI 6150 080M40 080A42 080M46 070M55 150M19 605M36 708M40 709M40 817M40 826M40 835M30 080M15 080A15 655M13 722M24 905M39 250A53 250A58 735A50
2008 Disclaimer
Stainless Steel Suppliers | Steel specifications | Alloy Steel | Steel-Stockholders | Tool Steel Stockholders | Tool Steel Gauge Steel | Engineering Steel | High Speed Steel West Yorkshire Steel Ltd, Sandbeck Industrial Estate, Wetherby, Leeds. LS22 7DN UK. Telephone: 0845 6581304 Facsimile: 0845 6581305 sales@westyorkssteel.com