You are on page 1of 1

A)1. For incomer On, Off Trip indication T/N/C switch & emergency push button shall be considered.

2. Bill of Material shall be submitted. 3. As par Danieli SLD Aux. supply RTDB (415/240), 10 KVA transformer shall be considered in place of 7.5 KVA. 4. Drive Module No. & selection criteria shall be submitted. 5. Drive trip & ready indication shall be shown in each Drive feeder. 6. On, Off & Trip indication shall be shown in each outgoing feeder. 7. Bus bar detail & cross section area shall be submitted. 8. Contactor & MCCB shall be considered at one Step higher.

You might also like