You are on page 1of 9

MOTOROLA V3

Disassembly
1 2

Press Battery latch and pull Battery door from the top

Push Battery to the bottom and Lift them up at the top

Service Engineeing & Optimization Level 1 / 2

MOTOROLA V3

Disassembly
3 4

Unfasten 2 screws (T5)

Remove the Back Housing by release the latch on each site

Service Engineeing & Optimization Level 1 / 2

MOTOROLA V3

Disassembly
5 6

Turn the Back Housing carefully and release the flex connector

Remove the two rubber

Service Engineeing & Optimization Level 1 / 2

MOTOROLA V3

Disassembly
7 8

Release the two latches one on each site to remove the Antenna assambly

Remove the Antenna Assambly

Service Engineeing & Optimization Level 1 / 2

MOTOROLA V3

Disassembly
9 10

Use a tweezer to remove the PCB from the Back Housing

Unfasten the 4 screws and close the Flip

Service Engineeing & Optimization Level 1 / 2

MOTOROLA V3

Disassembly
11 12

Use the disassembly tool to release cover latches on each side of the Front cover

Remove the Front Cover

Service Engineeing & Optimization Level 1 / 2

MOTOROLA V3

Disassembly
13 14

Use a tweezer to remove the Camera Lens

Open the Camera Flex Connector

Service Engineeing & Optimization Level 1 / 2

MOTOROLA V3

Disassembly
15 16

Remove the Camera Assambly

Use the plastic tool to open the Display Connector

Service Engineeing & Optimization Level 1 / 2

MOTOROLA V3

Disassembly
17

Lift up the LCD Module Done !

Service Engineeing & Optimization Level 1 / 2

You might also like