You are on page 1of 6

By:: Shalaka Hirudkar Dipti Choudhari Swati Paunikar

Prints received message on paper. If printing on paper- page printer. If printing on tape- tape printer.
Printing technique

By BAR

By WHEEL

Printing hammer engages with the fallen bell crank & moves towards right. The bell crank drives type bar which prints the type on paper. It has both letter & figure shift.

Grooves & projections are made on the inner side of the code ring. Feeler pawl is made to scan interior of code ring.

Both feeler pawn & printing wheel rotates.


As feeler pawl encounters a continuous groove, its motion is arrested. Now appropriate type comes opposite the printing hammer & paper.

Speed of signaling.

Expressed in Bauds or WPM.


Teleprinter speed in india-50bauds or 66.6wpm.

Duration of code element=1/50 sec=20 msec. For 7.5 unit code, Duration of character =20*7.5= 150 msec. rpm of transmitter shaft= (1000*60)/150 =400 rpm
The receiver shaft rotates a little faster, approx 454.5 rpm.

You might also like