Professional Documents
Culture Documents
Recuperar Contraseñas Fortigate
Recuperar Contraseñas Fortigate
Or just gain access to the firewall though the console interface will be describ ed here. This is strangely not described in the administratorsmanual. But Fortinet says t hat if you are a subscribing user of Fortinet's products, you can contact them, and they will guide you. I tested this on a Fortinet FortiGate 50A Connect to the firewall via the Console port on the back of the unit. This is do ne either by an Seriel cable or a RJ-45 to Seriel cabel. Connect to the firewall using the following parameter Baud 9600 8Bit None 1 None And of course the correct com-port. Yeah I know, obvious... but many make this m istake The firewall should then repose with its name or hostname. (If it dont try press ing "enter") Type in the username: maintainer The password is bcpb + The serienumber of the firewall (remember CAPS letters) Note that on some devices, after the device boots, you have 14 seconds to type i n the username and password. It might, therefore, be necessary to have them read y in a text editor, and then copy and paste them into the login screen. Now you should be connected to the firewall, and to change the admin password yo u type the following. config system admin edit admin set password <psswrd> end Now you are all done. Enjoy your regained acces to the Firewall.