Professional Documents
Culture Documents
DC Motor 64
1.13.063.XXX
Design
Commutator RFI Protection Insulation class Protection class Commutation Armature Magnet system Bearings Housing Copper/12-segments 2 chokes Winding H, otherwise A IP40 carbon brushes straight slot Permanent magnets, 2-pole 2 preloaded ball bearings Steel, corrosion protected zinc die-cast on both sides
1.13.063.XXX
End shields
220
12 115 350 3150 15
221
24 115 350 3150 7.5
407
12 150 400 3400 17
408
24 150 400 3400 8.5
No load characteristics*
No load speed No load current nO IO rpm A 3700 2.6 3700 1.3 3900 2.0 3900 1.0
Starting characteristics*
Starting torque Starting current TS IS mNm A 2500 95 2500 47 3400 128 3400 64
Performance characteristics*
max. Output power max. Constant torque Pmax Tmax W mNm 230 350 230 350 340 400 340 400
Motor parameters*
Weight Rotor inertia Terminal resistance Mech. time constant Electr. time constant Speed regulation constant Torque constant Thermal resistance Thermal resistance Axial play Direction of rotation G J R m e Rm kM Rth1 Rth2 g gcm2 Ohm ms ms rpm/mNm mNm/A K/W K/W 1300 850 0.125 15 2.0 1.5 27 2.8 3.3 < 0.1 1300 850 0.5 15 2.0 1.5 54 2.8 3.3 < 0.1 1600 1050 0.1 11 2.5 1.02 27 2.5 3.0 < 0.1 1600 1050 0.4 11 2.5 0.98 54 2.5 3.0 < 0.1
bidirectional
Operational conditions
Temperature range Axial force Radial force, 15 mm from mounting surface * at 25 C T FA FR C N N -10 - +70 50 200
1.13.063.XXX