Professional Documents
Culture Documents
COMPANY NAME
COMPANY LOGO
This document was created using recycled bytes - Dont print this unless you really have to, and save a tree!
This document is developed and released under the Creative Commons with Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0) (Commonly referred to as "CopyLeft") You are free:
to Share - to copy, distribute and transmit the work to Remix - to adapt the work
Attribution - You must attribute the work in the manner specified by the author or licensor (but not in any way that suggests that they endorse you or your use of the work). Share Alike - If you alter, transform, or build upon this work, you may distribute the resulting work only under the same or similar license to this one.
Waiver - Any of the above conditions can be waived if you get permission from the copyright holder. Public Domain - Where the work or any of its elements is in the public domain under applicable law, that status is in no way affected by the license. Other Rights - In no way are any of the following rights affected by the license: Your fair dealing or fair use rights, or other applicable copyright exceptions and limitations; The author's moral rights; Rights other persons may have either in the work itself or in how the work is used, such as publicity or privacy rights. Notice - For any reuse or distribution, you must make clear to others the license terms of this work. The best way to do this is with a link to http://creativecommons.org/licenses/by-sa/3.0/
This document was created using recycled bytes - Dont print this unless you really have to, and save a tree!
Contents
Introduction Feedback Naming Conventions Separators and Case System Families Loadable Families Materials Fill Patterns (Surface) Fill Patterns (Cut) Line Patterns Line Styles Line Weights Text Styles Families Doors 4 4 4 4 4 5 7 8 8 9 9 9 10 11 11
This document was created using recycled bytes - Dont print this unless you really have to, and save a tree!
INTRODUCTION
This Style Guide is developed by the members of the RevitForum, in order to provide the Revit Community, mainly small firms (1 - 5 employees), with high quality user generated content. The purpose of this style guide is to serve as a set of guidelines that will keep the content, regardless of who builds it, consistent for the purpose of sharing such content. The user generated Content, this Guide and Templates may be uploaded/downloaded for free at revirforum.org/download.php
FEEDBACK
Please visit revitforum.org and post any feedback in the Revit Sharing Content / Common RFO "Style Guide" Sub-forum, this is a dedicated sub-forum for developing this Style Guide.
NAMING CONVENTIONS
SEPARATORS AND CASE
Each descriptor is to be separated by a underscore "_" - Never use spaces. Words within the same descriptor are not separated, but written in TitleCase.
SYSTEM FAMILIES
System families are defined as non-loadable families, e.g. Walls, Floors and Roofs. Descriptors: <Type>_<TotalThickess>_<MainLayers>_<MainLayersThickness> Examples: Ext_400_Brick-Ins-ConPC_110-190-100 Int_120_Gyp-Ins-Gyp_25-70-25 Layers are named from exterior to interior and top to bottom. Secondary layers as membranes, airspaces etc. are always left out.
This document was created using recycled bytes - Dont print this unless you really have to, and save a tree!
<Type> = Abbreviations based on this list: Description Wall - Interior / Partition Wall Wall - Exterior Wall - Foundation Wall - Retaining Wall - Soffit Wall - Core Shaft Roof Floor - Finish (Architectural) Floor - Slab (Structural) Floor - Exterior (Site works)
<Type> Int Ext Foun Ret Sof Core Roof Floor Slab Site
<TotalThickness> = Total thickness of the structure assembly <MainLayers> = Main layers in the assembly, based on the following abbreviations: Material Abbreviation Concrete Cast-In-Place ConCIP Concrete Pre Cast ConPC Concrete Masonry Unit CMU Brick Brick Metals Mtl Wood Wd Gypsum Gyp Plaster Plst Shingle Shgl Tile Tile Covering Cov Insulation Ins
LOADABLE FAMILIES
Loadable Families are all the families that you can keep in the library as separate .rfa files, e.g. Windows, Doors, Casework, Furniture, etc. Descriptors: <Category>_<Type>_<Manufacturer>_<Descriptor>_<Host/Size> Examples: Furn_Chair_FritzHansen_SevenSeries_UH Door_Double_JeldWen_Model648_WH
This document was created using recycled bytes - Dont print this unless you really have to, and save a tree!
<Category> Template: Annotation Baluster Baluster-Panel Baluster-Post Casework Column (Arch) Curtain Panel Pattern Based Curtain Wall Panel Detail Component Door - Curtain Wall Door Electrical Equipment Electrical Fixture Entourage Furniture System Furniture Generic Model Lighting Fixture Mechanical Equipment
Abbrev: Anno Ba BaPa BaPo CW ACol CuPPB CuWP Det DoorCW Door ElEq ElFix Ent FurnSys Furn Gen LightFix Mech
Template: Parking Planting Plumbing Fixture Profile Profile-Hosted Profile-Mullion Profile-Rail Profile-Reveal Profile-Stair Nosing RPC Family Site Specialty Equipment Structural Column Structural Foundation Structural Framing - Beams and Braces Structural Framing - Complex and Trusses Structural Trusses Titleblock Window Curtain Wall Window with Trim Window
Abbrev: Park Plant Plumb Pro ProHo ProMu ProRa ProRe ProSt RPC Site SpEq SCol SFnd SFram SFramCT STruss TitleB WinCW WinWT Win
<Type> = Chair, Toilet, Pendant, Cabinet Base etc. <Manufacturer> = Manufacturer company name, or just "Gen" for generic content <Descriptor> = Product, Type, Shape, etc.
This document was created using recycled bytes - Dont print this unless you really have to, and save a tree!
<Host/Size> = How the family is hosted, or size e.g. for profiles Host Abbreviation Un Hosted UH Floor Hosted FH Wall Hosted WH Roof Hosted RH Ceiling Hosted CH Face Based FB Line Based LB Adaptive Component AC Size 250 mm 1'4" Parametric Abbreviation None, use: 250mm None, use: 1'4" PM
MATERIALS
Materials are suffixed with the 6 digit MasterFormat Numbers mainly for sorting purposes. (When 8 digits, the last two are left out) Descriptors: <MF Number>_<MF Title>_<Finish/Size> <MF Number> : <MF Title> : First 6 Digits based on the MasterFormat Numbers Material Name based on the MasterFormat Titles Use copy/paste to ensure consistent namings But remove all spaces, and ensure TitleCase. Short description of the finish or size. When applicable only
<Finish/Size> :
Examples: 034116_PrecastConcreteSlabs 042113_BrickMasonry_RunningBondColor1 042200_ConcreteUnitVeneerMasonry_390x490x190 051223_StructuralSteelForBuildings 064813_ExteriorWoodDoorFrames 073213_ClayRoofTiles 096423_WoodParquetFlooring_CherrySatinVarnish 099123_InteriorPainting_WhiteGlossy An optional _<Manufacturer> may be sufffixed to the above. Example: 042113_BrickMasonry_RunningBondColor1_AjaxBricksInc
This document was created using recycled bytes - Dont print this unless you really have to, and save a tree!
This document was created using recycled bytes - Dont print this unless you really have to, and save a tree!
LINE PATTERNS
Line Patterns are in general named by usage, and not "Dashed" as Out of The Box Content. A dashed line used for Demolition, gets named "Demolition", so that its laud and clear what the Line Pattern is used for, and what will be affected if/when its changed. Standard Line Patterns Used in the RevitForum Template and Content: Pattern Name Description RFO_Grids Grid Lines RFO_Sections Section Lines RFO_Callouts Callout Boundaries RFO_Levels Levels RFO_Center_Lines Center Lines RFO_Ref_Planes Reference Planes RFO_Demolition Demolition phase override RFO_Temporary Temporary phase override RFO_Door_Swing_Secondary Secondary swings in double doors RFO_Elevation_Swings Elevation swings for doors, windows, etc. RFO_Break_Lines Break Lines RFO_Casework_Below Casework below e.g. countertops RFO_Casework_Above Casework above cutplane RFO_Railings_Above Railings above cutplane RFO_Ramps_Above Ramps above cutplane RFO_Stringers_Above Ramp and Stair Stringers above cutplane RFO_Stairs_Above Stairs above cutplane RFO_Roofs_Above Roofs above cutplane RFO_Overhead_Lines Anything else above cutplane RFO_Hidden_Lines Anything else hidden behind or below RFO_Property_Lines Property lines RFO_Primary_Contours Primary contours for Topography RFO_Secondary_Contours Secondary contours for Topography RFO_Horizontal_Bracing Structural horizontal bracings RFO_Vertical_Bracing Structural vertical bracings RFO_Kicker_Bracing Structural kicker bracings RFO_Joists Structural joists RFO_Purlins Structural purlins RFO_Slope Slopes lines on roofs, floors, etc. RFO_Vapour_Barrier Vapour barriers
This document was created using recycled bytes - Dont print this unless you really have to, and save a tree!
All Fill Patterns are hardcoded to LW 1, so its considered best practice to reserve LW1 for this purpose only. Model Patterns for ceilings are hardcoded to LW 2, so its considered best practice to reserve LW2 for this purpose only. Revit gives you the option to use 16 different LWs, in most cases you wont need that many - Maybe 7 different LWs is more appropriate? In that case use LW3LW10, reserve LW1+2 for the above patterns, and leave the remaining alone.
TIP: Theres a great post on Setting Up Line Weights by Aaron Maller in this thread at the RevitForum
TEXT STYLES
This document was created using recycled bytes - Dont print this unless you really have to, and save a tree!
10
FAMILIES
DOORS
Indented usage of this category: Doors Graphics: Cutable Depth Clip Join Geometry (in Project) = Yes = No = No
This document was created using recycled bytes - Dont print this unless you really have to, and save a tree!
11