You are on page 1of 38

qWTRFHOIP[LOKJGTFRDWETFIO[\

]'[POIJGYTRE
\WEARTFIOPL;PLOIGYTRESWARTFYIOP[;LOIJGYTRE
WAERTFYIOPL;[;POIUGYTRSWEERTFYIOPLOKGYTREW
WAERTFIOP[;POKGYTRESWARTFYUOIP[LLOKIUGYTR
ESWAQWERTFYUIOP[;PLIGTFRSZZDSCGIPL[;PLOIJTYR
TRESWSREFYGUIOPLjklkjgfdsdfgkl;lkgfddfiop[pogf
gfdertiokjcvklkn
sertiokgvcjklkb
1c000 - 00000000baf1f000 (reserved)
[
0.000000] BIOS-e820: 00000000baf1f000 - 00000000baf9f000 (ACPI NVS)
[
0.000000] BIOS-e820: 00000000baf9f000 - 00000000bafff000 (ACPI data)
[
0.000000] BIOS-e820: 00000000bafff000 - 00000000bb000000 (usable)
[
0.000000] BIOS-e820: 00000000bb000000 - 00000000bfa00000 (reserved)
[
0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[
0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[
0.000000] BIOS-e820: 00000000fed08000 - 00000000fed09000 (reserved)
[
0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
[
0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[
0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[
0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
[
0.000000] BIOS-e820: 0000000100000000 - 00000001bfe00000 (usable)
[
0.000000] NX (Execute Disable) protection: active
[
0.000000] DMI 2.6 present.
[
0.000000] DMI: Dell Inc.
Dell System Inspiron N7110/0YH79Y, BIOS A
05 05/19/2011
[
0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) =
=> (reserved)
[
0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[
0.000000] last_pfn = 0x1bfe00 max_arch_pfn = 0x1000000
[
0.000000] MTRR default type: uncachable
[
0.000000] MTRR fixed ranges enabled:
[
0.000000] 00000-9FFFF write-back
[
0.000000] A0000-BFFFF uncachable
[
0.000000] C0000-FFFFF write-protect
[
0.000000] MTRR variable ranges enabled:
[
0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[
0.000000] 1 base 000000000 mask F80000000 write-back
[
0.000000] 2 base 080000000 mask FC0000000 write-back
[
0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[
0.000000] 4 base 0BB000000 mask FFF000000 uncachable
[
0.000000] 5 base 100000000 mask F80000000 write-back
[
0.000000] 6 base 180000000 mask FC0000000 write-back
[
0.000000] 7 base 1BFE00000 mask FFFE00000 uncachable
[
0.000000] 8 disabled
[
0.000000] 9 disabled
[
0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[
0.000000] initial memory mapped : 0 - 01e00000
[
0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[
0.000000] 0000000000 - 0000200000 page 4k
[
0.000000] 0000200000 - 0037a00000 page 2M
[
0.000000] 0037a00000 - 0037bfe000 page 4k
[
0.000000] kernel direct mapping tables up to 37bfe000 @ 1dfb000-1e00000
[
0.000000] RAMDISK: 3677a000 - 373b5000
[
0.000000] ACPI: RSDP 000f00e0 00024 (v02 DELL )
[
0.000000] ACPI: XSDT baffe120 0008C (v01 DELL
QA09
00000002 LOHR 0000
0002)
[
0.000000] ACPI: FACP bafed000 000F4 (v03 DELL
QA09
00000002 PTL 0000
0002)
[
0.000000] ACPI: DSDT baff0000 09C5C (v02 DELL
SNB-CPT 00000000 INTL 2006

1109)
[
0.000000]
[
0.000000]
0001)
[
0.000000]
0001)
[
0.000000]
1109)
[
0.000000]
0002)
[
0.000000]
0002)
[
0.000000]
0002)
[
0.000000]
0002)
[
0.000000]
1109)
[
0.000000]
1109)
[
0.000000]
0002)
[
0.000000]
0001)
[
0.000000]
0002)
[
0.000000]
[
0.000000]
[
0.000000]
[
0.000000]
[
0.000000]
[
0.000000]
[
0.000000]
[
0.000000]
[
0.000000]
[
0.000000]
[
0.000000]
[
0.000000]
[
0.000000]
[
0.000000]
[
0.000000]
[
0.000000]
[
0.000000]
0
[
0.000000]
[
0.000000]
[
0.000000]
[
0.000000]
[
0.000000]
[
0.000000]
[
0.000000]
[
0.000000]
[
0.000000]
[
0.000000]
[
0.000000]
[
0.000000]
[
0.000000]
[
0.000000]
[
0.000000]
[
0.000000]

ACPI: FACS baf41000 00040


ACPI: SLIC baffd000 00176 (v01 DELL

QA09

ACPI: BOOT baffc000 00028 (v01


ACPI: SSDT baffa000 01068 (v01 DELL

00000002 LOHR 0000


00000001 PTL 0000

PtidDevc 00001000 INTL 2006

ACPI: ASF! bafef000 000A5 (v32 DELL

QA09

00000002 PTL 0000

ACPI: HPET bafec000 00038 (v01 DELL

QA09

00000002 PTL 0000

ACPI: APIC bafeb000 00098 (v01 DELL

QA09

00000002 PTL 0000

ACPI: MCFG bafea000 0003C (v01 DELL

QA09

00000002 PTL 0000

ACPI: SSDT bafe9000 00780 (v01 PmRef Cpu0Ist 00003000 INTL 2006
ACPI: SSDT bafe8000 00996 (v01 PmRef
ACPI: UEFI bafe7000 0003E (v01 DELL
ACPI: UEFI bafe6000 00042 (v01 PTL
ACPI: UEFI bafe5000 00256 (v01 DELL

CpuPm 00003000 INTL 2006


QA09

00000002 PTL 0000

COMBUF 00000001 PTL 0000


QA09

00000002 PTL 0000

ACPI: Local APIC address 0xfee00000


6274MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone PFN ranges:
DMA
0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x00037bfe
HighMem 0x00037bfe -> 0x001bfe00
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x000bac8f
0: 0x000bafff -> 0x000bb000
0: 0x00100000 -> 0x001bfe00
On node 0 totalpages: 1550877
free_area_init_node: node 0, pgdat c17c2e40, node_mem_map f2f7a20
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3949 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 222502 pages, LIFO batch:31
HighMem zone: 12549 pages used for memmap
HighMem zone: 1310093 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)

[
0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[
0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[
0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[
0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[
0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[
0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[
0.000000] ACPI: IRQ0 used by override.
[
0.000000] ACPI: IRQ2 used by override.
[
0.000000] ACPI: IRQ9 used by override.
[
0.000000] Using ACPI (MADT) for SMP configuration information
[
0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[
0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[
0.000000] nr_irqs_gsi: 40
[
0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[
0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[
0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[
0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[
0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:3860
0000)
[
0.000000] Booting paravirtualized kernel on bare hardware
[
0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_id
s:1
[
0.000000] PERCPU: Embedded 13 pages/cpu @f7800000 s32320 r0 d20928 u262144
[
0.000000] pcpu-alloc: s32320 r0 d20928 u262144 alloc=1*2097152
[
0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[
0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag
es: 1536544
[
0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-16-generic-p
ae root=UUID=265df767-ebc2-4384-b11e-7119dbcd30e3 ro quiet splash vt.handoff=7
[
0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[
0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[
0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[
0.000000] Initializing CPU#0
[
0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[
0.000000] allocated 36689600 bytes of page_cgroup
[
0.000000] please try 'cgroup_disable=memory' option if you don't want memor
y cgroups
[
0.000000] Initializing HighMem for node 0 (00037bfe:001bfe00)
[
0.000000] Memory: 6086840k/7337984k available (5375k kernel code, 116668k r
eserved, 2606k data, 720k init, 5290568k highmem)
[
0.000000] virtual kernel memory layout:
[
0.000000]
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[
0.000000]
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[
0.000000]
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[
0.000000]
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[
0.000000]
.init : 0xc17cc000 - 0xc1880000 ( 720 kB)
[
0.000000]
.data : 0xc153fde1 - 0xc17cb800 (2606 kB)
[
0.000000]
.text : 0xc1000000 - 0xc153fde1 (5375 kB)
[
0.000000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[
0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, N
odes=1
[
0.000000] Hierarchical RCU implementation.
[
0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[
0.000000] RCU-based detection of stalled CPUs is disabled.
[
0.000000] NR_IRQS:2304 nr_irqs:744 16
[
0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000
[
0.000000] Extended CMOS year: 2000

[
0.000000] vt handoff: transparent VT on vt#7
[
0.000000] Console: colour dummy device 80x25
[
0.000000] console [tty0] enabled
[
0.000000] hpet clockevent registered
[
0.000000] Fast TSC calibration using PIT
[
0.004000] Detected 2292.462 MHz processor.
[
0.000002] Calibrating delay loop (skipped), value calculated using timer fr
equency.. 4584.92 BogoMIPS (lpj=9169848)
[
0.000006] pid_max: default: 32768 minimum: 301
[
0.000026] Security Framework initialized
[
0.000037] AppArmor: AppArmor initialized
[
0.000038] Yama: becoming mindful.
[
0.000082] Mount-cache hash table entries: 512
[
0.000180] Initializing cgroup subsys ns
[
0.000183] ns_cgroup deprecated: consider using the 'clone_children' flag wi
thout the ns_cgroup.
[
0.000185] Initializing cgroup subsys cpuacct
[
0.000190] Initializing cgroup subsys memory
[
0.000197] Initializing cgroup subsys devices
[
0.000199] Initializing cgroup subsys freezer
[
0.000201] Initializing cgroup subsys net_cls
[
0.000203] Initializing cgroup subsys blkio
[
0.000232] CPU: Physical Processor ID: 0
[
0.000233] CPU: Processor Core ID: 0
[
0.000237] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[
0.000238] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[
0.000241] mce: CPU supports 7 MCE banks
[
0.000250] CPU0: Thermal monitoring handled by SMI
[
0.000257] using mwait in idle threads.
[
0.002912] ACPI: Core revision 20110112
[
0.008838] ftrace: allocating 24344 entries in 48 pages
[
0.018488] Enabling APIC mode: Flat. Using 1 I/O APICs
[
0.018837] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[
0.058461] CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz stepping 07
[
0.163711] Performance Events: PEBS fmt1+, generic architected perfmon, Inte
l PMU driver.
[
0.163717] ... version:
3
[
0.163718] ... bit width:
48
[
0.163719] ... generic registers:
4
[
0.163720] ... value mask:
0000ffffffffffff
[
0.163722] ... max period:
000000007fffffff
[
0.163723] ... fixed-purpose events: 3
[
0.163724] ... event mask:
000000070000000f
[
0.164146] CPU 1 irqstacks, hard=f74d6000 soft=f74e0000
[
0.164150] Booting Node 0, Processors #1
[
0.174306] Initializing CPU#1
[
0.251598] CPU1: Thermal monitoring handled by SMI
[
0.271674] CPU 2 irqstacks, hard=f74ea000 soft=f74ec000
[
0.271679] #2
[
0.281924] Initializing CPU#2
[
0.359430] CPU2: Thermal monitoring handled by SMI
[
0.379584] CPU 3 irqstacks, hard=f74f6000 soft=f74f8000
[
0.379588] #3
[
0.389832] Initializing CPU#3
[
0.662965] CPU3: Thermal monitoring handled by SMI
[
0.683029] Brought up 4 CPUs
[
0.683031] Total of 4 processors activated (41054.95 BogoMIPS).
[
0.685713] devtmpfs: initialized
[
0.686788] print_constraints: dummy:
[
0.686814] Time: 21:34:54 Date: 04/23/13

[
0.686848] NET: Registered protocol family 16
[
0.686940] Trying to unpack rootfs image as initramfs...
[
0.687016] EISA bus registered
[
0.687034] ACPI: bus type pci registered
[
0.687130] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfb
ffffff] (base 0xf8000000)
[
0.687135] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[
0.687137] PCI: Using MMCONFIG for extended config space
[
0.687140] PCI: Using configuration type 1 for base access
[
0.688871] bio: create slab <bio-0> at 0
[
0.690625] ACPI: EC: Look up EC in DSDT
[
0.692218] ACPI: Executed 2 blocks of module-level executable AML code
[
0.735018] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[
0.735469] ACPI: SSDT bae19718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 2006
1109)
[
0.735896] ACPI: Dynamic OEM Table Load:
[
0.735898] ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003001 INTL 2006
1109)
[
0.759219] ACPI: SSDT baf0fa98 00303 (v01 PmRef
ApIst 00003000 INTL 2006
1109)
[
0.759685] ACPI: Dynamic OEM Table Load:
[
0.759687] ACPI: SSDT (null) 00303 (v01 PmRef
ApIst 00003000 INTL 2006
1109)
[
0.791014] ACPI: SSDT bae18d98 00119 (v01 PmRef
ApCst 00003000 INTL 2006
1109)
[
0.791436] ACPI: Dynamic OEM Table Load:
[
0.791439] ACPI: SSDT (null) 00119 (v01 PmRef
ApCst 00003000 INTL 2006
1109)
[
0.809635] ACPI: Interpreter enabled
[
0.809645] ACPI: (supports S0 S3 S4 S5)
[
0.809676] ACPI: Using IOAPIC for interrupt routing
[
0.818504] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[
0.842892] ACPI: No dock devices found.
[
0.842897] HEST: Table not found.
[
0.842902] PCI: Using host bridge windows from ACPI; if necessary, use "pci=
nocrs" and report a bug
[
0.843526] \_SB_.PCI0:_OSC invalid UUID
[
0.843528] _OSC request data:1 8 1f
[
0.843535] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[
0.844576] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[
0.844581] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[
0.844585] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bfff
f]
[
0.844590] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xfeaffff
f]
[
0.844593] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44ff
f]
[
0.844611] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
[
0.844660] pci 0000:00:02.0: [8086:0116] type 0 class 0x000300
[
0.844675] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit]
[
0.844684] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[
0.844691] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
[
0.844774] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[
0.844811] pci 0000:00:16.0: reg 10: [mem 0xd1705000-0xd170500f 64bit]
[
0.844901] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[
0.844908] pci 0000:00:16.0: PME# disabled
[
0.844966] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[
0.844999] pci 0000:00:1a.0: reg 10: [mem 0xd170a000-0xd170a3ff]
[
0.845108] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[
0.845115] pci 0000:00:1a.0: PME# disabled

[
0.845155]
[
0.845181]
[
0.845286]
[
0.845293]
[
0.845331]
[
0.845436]
[
0.845442]
[
0.845484]
[
0.845590]
[
0.845596]
[
0.845637]
[
0.845742]
[
0.845748]
[
0.845787]
[
0.845888]
[
0.845894]
[
0.845941]
[
0.845974]
[
0.846076]
[
0.846082]
[
0.846120]
[
0.846290]
[
0.846326]
[
0.846340]
[
0.846355]
[
0.846369]
[
0.846382]
[
0.846395]
[
0.846462]
[
0.846469]
[
0.846502]
[
0.846530]
[
0.846569]
[
0.846975]
[
0.847301]
[
0.848427]
[
0.848479]
[
0.854782]
[
0.854790]
[
0.854797]
[
0.854807]
] (disabled)
[
0.854917]
[
0.854956]
[
0.855100]
[
0.855108]
[
0.862669]
[
0.862677]
[
0.862685]
[
0.862696]
] (disabled)
[
0.862807]
[
0.862836]
[
0.862883]
[
0.862915]
[
0.863000]
[
0.863003]
[
0.863011]
[
0.870657]
[
0.870665]

pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci
pci

0000:00:1b.0:
0000:00:1b.0:
0000:00:1b.0:
0000:00:1b.0:
0000:00:1c.0:
0000:00:1c.0:
0000:00:1c.0:
0000:00:1c.2:
0000:00:1c.2:
0000:00:1c.2:
0000:00:1c.4:
0000:00:1c.4:
0000:00:1c.4:
0000:00:1c.5:
0000:00:1c.5:
0000:00:1c.5:
0000:00:1d.0:
0000:00:1d.0:
0000:00:1d.0:
0000:00:1d.0:
0000:00:1f.0:
0000:00:1f.2:
0000:00:1f.2:
0000:00:1f.2:
0000:00:1f.2:
0000:00:1f.2:
0000:00:1f.2:
0000:00:1f.2:
0000:00:1f.2:
0000:00:1f.2:
0000:00:1f.3:
0000:00:1f.3:
0000:00:1f.3:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:00:1c.0:
0000:00:1c.0:
0000:00:1c.0:
0000:00:1c.0:

[8086:1c20] type 0 class 0x000403


reg 10: [mem 0xd1700000-0xd1703fff 64bit]
PME# supported from D0 D3hot D3cold
PME# disabled
[8086:1c10] type 1 class 0x000604
PME# supported from D0 D3hot D3cold
PME# disabled
[8086:1c14] type 1 class 0x000604
PME# supported from D0 D3hot D3cold
PME# disabled
[8086:1c18] type 1 class 0x000604
PME# supported from D0 D3hot D3cold
PME# disabled
[8086:1c1a] type 1 class 0x000604
PME# supported from D0 D3hot D3cold
PME# disabled
[8086:1c26] type 0 class 0x000c03
reg 10: [mem 0xd1709000-0xd17093ff]
PME# supported from D0 D3hot D3cold
PME# disabled
[8086:1c4b] type 0 class 0x000601
[8086:1c03] type 0 class 0x000106
reg 10: [io 0x4088-0x408f]
reg 14: [io 0x4094-0x4097]
reg 18: [io 0x4080-0x4087]
reg 1c: [io 0x4090-0x4093]
reg 20: [io 0x4060-0x407f]
reg 24: [mem 0xd1708000-0xd17087ff]
PME# supported from D3hot
PME# disabled
[8086:1c22] type 0 class 0x000c05
reg 10: [mem 0xd1704000-0xd17040ff 64bit]
reg 20: [io 0xefa0-0xefbf]
[8086:008a] type 0 class 0x000280
reg 10: [mem 0xd1600000-0xd1601fff 64bit]
PME# supported from D0 D3hot D3cold
PME# disabled
PCI bridge to [bus 01-01]
bridge window [io 0xf000-0x0000] (disabled)
bridge window [mem 0xd1600000-0xd16fffff]
bridge window [mem 0xfff00000-0x000fffff pref

pci
pci
pci
pci
pci
pci
pci
pci

0000:02:00.0:
0000:02:00.0:
0000:02:00.0:
0000:02:00.0:
0000:00:1c.2:
0000:00:1c.2:
0000:00:1c.2:
0000:00:1c.2:

[1033:0194] type 0 class 0x000c03


reg 10: [mem 0xd1500000-0xd1501fff 64bit]
PME# supported from D0 D3hot D3cold
PME# disabled
PCI bridge to [bus 02-02]
bridge window [io 0xf000-0x0000] (disabled)
bridge window [mem 0xd1500000-0xd15fffff]
bridge window [mem 0xfff00000-0x000fffff pref

pci
pci
pci
pci
pci
pci
pci
pci
pci

0000:03:00.0:
0000:03:00.0:
0000:03:00.0:
0000:03:00.0:
0000:03:00.0:
0000:03:00.0:
0000:03:00.0:
0000:00:1c.4:
0000:00:1c.4:

[10ec:8136] type 0 class 0x000200


reg 10: [io 0x3000-0x30ff]
reg 18: [mem 0xd0404000-0xd0404fff 64bit pref]
reg 20: [mem 0xd0400000-0xd0403fff 64bit pref]
supports D1 D2
PME# supported from D0 D1 D2 D3hot D3cold
PME# disabled
PCI bridge to [bus 03-03]
bridge window [io 0x3000-0x3fff]

[
0.870673]
sabled)
[
0.870684]
t pref]
[
0.870759]
[
0.870766]
[
0.870774]
[
0.870785]
t pref]
[
0.870820]
[
0.870826]
[
0.871062]
[
0.871132]
[
0.871196]
[
0.871258]
[
0.871402]
[
0.871404]
[
0.871411]
[
0.871469]
[
0.871471]
[
0.875575]
[
0.875655]
9
[
0.875732]
[
0.875808]
9
[
0.875887]
0, disabled.
[
0.875962]
0, disabled.
[
0.876038]
[
0.876114]
[
0.876274]
,locks=none
[
0.876286]
[
0.876599]
[
0.876666]
[
0.876738]
[
0.876756]
[
0.876784]
[
0.877150]
[
0.877153]
[
0.877156]
[
0.877299]
[
0.877303]
[
0.877311]
[
0.877314]
[
0.877447]
[
0.877450]
[
0.877451]
[
0.877467]
[
0.877520]
[
0.877529]
[
0.879551]
[
0.882621]
[
0.882675]
[
0.882728]
[
0.882753]
[
0.887930]
[
0.887960]

pci 0000:00:1c.4:

bridge window [mem 0xfff00000-0x000fffff] (di

pci 0000:00:1c.4:

bridge window [mem 0xd0400000-0xd04fffff 64bi

pci
pci
pci
pci

0000:00:1c.5: PCI bridge to [bus 04-08]


0000:00:1c.5: bridge window [io 0x2000-0x2fff]
0000:00:1c.5: bridge window [mem 0xd0d00000-0xd14fffff]
0000:00:1c.5: bridge window [mem 0xd0500000-0xd0cfffff 64bi

pci_bus 0000:00: on NUMA node 0


ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 1f 1f
pci0000:00: Requesting ACPI _OSC control (0x1d)
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
wmi: Mapper loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d800 - 000000000009ffff
reserve RAM buffer: 00000000bac8f000 - 00000000bbffffff
reserve RAM buffer: 00000000bb000000 - 00000000bbffffff
reserve RAM buffer: 00000001bfe00000 - 00000001bfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
Switched to NOHz mode on CPU #3
Switched to NOHz mode on CPU #2
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init

[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
)
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[

0.887981]
0.888523]
0.888528]
0.888531]
0.888534]
0.888538]
0.888541]
0.888544]
0.888547]
0.888551]
0.888554]
0.888557]
0.888560]
0.888564]
0.888567]
0.888570]
0.888573]
0.888580]
0.888583]
0.888587]
0.888590]
0.888677]

ACPI: bus type pnp registered


pnp 00:00: [bus 00-3e]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff
pnp 00:00: [mem 0x000c0000-0x000c3fff
pnp 00:00: [mem 0x000c4000-0x000c7fff
pnp 00:00: [mem 0x000c8000-0x000cbfff
pnp 00:00: [mem 0x000cc000-0x000cffff
pnp 00:00: [mem 0x000d0000-0x000d3fff
pnp 00:00: [mem 0x000d4000-0x000d7fff
pnp 00:00: [mem 0x000d8000-0x000dbfff
pnp 00:00: [mem 0x000dc000-0x000dffff
pnp 00:00: [mem 0x000e0000-0x000e3fff
pnp 00:00: [mem 0x000e4000-0x000e7fff
pnp 00:00: [mem 0x000e8000-0x000ebfff
pnp 00:00: [mem 0x000ec000-0x000effff
pnp 00:00: [mem 0x000f0000-0x000fffff
pnp 00:00: [mem 0xbfa00000-0xfeafffff
pnp 00:00: [mem 0xfed40000-0xfed44fff
pnp 00:00: Plug and Play ACPI device,

0.888697]
0.888700]
0.888703]
0.888706]
0.888709]
0.888748]
0.888848]
0.888887]
0.888902]
0.888913]
0.888952]
0.888970]
0.888973]
0.888976]
0.888978]
0.888981]
0.888983]
0.888986]
0.888988]
0.888991]
0.888993]
0.888996]
0.888998]
0.889001]
0.889004]
0.889007]
0.889009]
0.889012]
0.889015]
0.889018]
0.889020]
0.889094]
0.889097]
0.889101]
0.889105]
0.889108]
0.889112]

pnp 00:01: [io 0x0000-0x001f]


pnp 00:01: [io 0x0081-0x0091]
pnp 00:01: [io 0x0093-0x009f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [mem 0xfed00000-0xfed003ff]
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: [io 0x00f0]
pnp 00:03: [irq 13]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [io 0x002e-0x002f]
pnp 00:04: [io 0x004e-0x004f]
pnp 00:04: [io 0x0061]
pnp 00:04: [io 0x0063]
pnp 00:04: [io 0x0065]
pnp 00:04: [io 0x0067]
pnp 00:04: [io 0x0068]
pnp 00:04: [io 0x006c]
pnp 00:04: [io 0x0070]
pnp 00:04: [io 0x0080]
pnp 00:04: [io 0x0092]
pnp 00:04: [io 0x00b2-0x00b3]
pnp 00:04: [io 0x0680-0x069f]
pnp 00:04: [io 0x1000-0x1003]
pnp 00:04: [io 0x1004-0x1013]
pnp 00:04: [io 0xffff]
pnp 00:04: [io 0x0400-0x0453]
pnp 00:04: [io 0x0458-0x047f]
pnp 00:04: [io 0x0500-0x057f]
pnp 00:04: [io 0x164e-0x164f]
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0x1000-0x1003] has been reserved
system 00:04: [io 0x1004-0x1013] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x0453] has been reserved
system 00:04: [io 0x0458-0x047f] has been reserved

window]
window]
window]
window]
window]
window]
window]
window]
window]
window]
window]
window]
window]
window]
window]
window]
IDs PNP0a08 PNP0a03 (active

[
0.889116]
[
0.889119]
[
0.889124]
[
0.889136]
[
0.889143]
[
0.889183]
[
0.889223]
[
0.889282]
[
0.889287]
ive)
[
0.889338]
[
0.889340]
[
0.889347]
[
0.889390]
[
0.889435]
[
0.889477]
)
[
0.889641]
[
0.889645]
[
0.889648]
[
0.889651]
[
0.889654]
[
0.889657]
[
0.889660]
[
0.889663]
[
0.889666]
[
0.889669]
[
0.889672]
[
0.889740]
[
0.889744]
[
0.889748]
[
0.889752]
[
0.889756]
[
0.889762]
[
0.889766]
[
0.889770]
[
0.889774]
[
0.889778]
[
0.889783]
[
0.889787]
[
0.890124]
[
0.890127]
[
0.890131]
[
0.927119]
[
0.927122]
[
0.927132]
[
0.927138]
[
0.927149]
[
0.927152]
[
0.927161]
[
0.927167]
[
0.927178]
[
0.927183]
[
0.927191]
[
0.927198]
t pref]
[
0.927209]
[
0.927214]
[
0.927222]
[
0.927229]

system 00:04: [io 0x0500-0x057f] has been reserved


system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [io 0x0070-0x0077]
pnp 00:05: [irq 8]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0454-0x0457]
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (act
pnp
pnp
pnp
pnp
pnp
pnp

00:07:
00:07:
00:07:
00:07:
00:08:
00:08:

[io
[io
[irq
Plug
[irq
Plug

0x0060]
0x0064]
1]
and Play ACPI device, IDs PNP0303 (active)
12]
and Play ACPI device, IDs DLL04d8 PNP0f13 (active

pnp 00:09: [mem 0xfed1c000-0xfed1ffff]


pnp 00:09: [mem 0xfed10000-0xfed17fff]
pnp 00:09: [mem 0xfed18000-0xfed18fff]
pnp 00:09: [mem 0xfed19000-0xfed19fff]
pnp 00:09: [mem 0xf8000000-0xfbffffff]
pnp 00:09: [mem 0xfed20000-0xfed3ffff]
pnp 00:09: [mem 0xfed90000-0xfed93fff]
pnp 00:09: [mem 0xfed45000-0xfed8ffff]
pnp 00:09: [mem 0xff000000-0xffffffff]
pnp 00:09: [mem 0xfee00000-0xfeefffff]
pnp 00:09: [mem 0xfff00000-0xfff00fff]
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:09: [mem 0xfff00000-0xfff00fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [mem 0xd1600000-0xd16fffff]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:00:1c.2: PCI bridge to [bus 02-02]
pci 0000:00:1c.2: bridge window [io disabled]
pci 0000:00:1c.2: bridge window [mem 0xd1500000-0xd15fffff]
pci 0000:00:1c.2: bridge window [mem pref disabled]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem disabled]
pci 0000:00:1c.4: bridge window [mem 0xd0400000-0xd04fffff 64bi
pci
pci
pci
pci

0000:00:1c.5: PCI bridge to [bus 04-08]


0000:00:1c.5: bridge window [io 0x2000-0x2fff]
0000:00:1c.5: bridge window [mem 0xd0d00000-0xd14fffff]
0000:00:1c.5: bridge window [mem 0xd0500000-0xd0cfffff 64bi

t pref]
[
0.927259] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[
0.927267] pci 0000:00:1c.0: setting latency timer to 64
[
0.927282] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[
0.927289] pci 0000:00:1c.2: setting latency timer to 64
[
0.927299] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[
0.927306] pci 0000:00:1c.4: setting latency timer to 64
[
0.927320] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[
0.927326] pci 0000:00:1c.5: setting latency timer to 64
[
0.927332] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[
0.927336] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[
0.927339] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[
0.927343] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
[
0.927346] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[
0.927350] pci_bus 0000:01: resource 1 [mem 0xd1600000-0xd16fffff]
[
0.927353] pci_bus 0000:02: resource 1 [mem 0xd1500000-0xd15fffff]
[
0.927356] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[
0.927360] pci_bus 0000:03: resource 2 [mem 0xd0400000-0xd04fffff 64bit pref
]
[
0.927363] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[
0.927367] pci_bus 0000:04: resource 1 [mem 0xd0d00000-0xd14fffff]
[
0.927370] pci_bus 0000:04: resource 2 [mem 0xd0500000-0xd0cfffff 64bit pref
]
[
0.927414] NET: Registered protocol family 2
[
0.927510] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[
0.927841] TCP established hash table entries: 131072 (order: 8, 1048576 byt
es)
[
0.928204] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[
0.928388] TCP: Hash tables configured (established 131072 bind 65536)
[
0.928391] TCP reno registered
[
0.928395] UDP hash table entries: 512 (order: 2, 16384 bytes)
[
0.928402] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[
0.928536] NET: Registered protocol family 1
[
0.928552] pci 0000:00:02.0: Boot video device
[
0.930692] pci 0000:02:00.0: xHCI HW did not halt within 2000 usec status =
0x0
[
0.930706] PCI: CLS 64 bytes, default 64
[
0.930736] Simple Boot Flag at 0x66 set to 0x1
[
0.931192] cpufreq-nforce2: No nForce2 chipset.
[
0.931428] audit: initializing netlink socket (disabled)
[
0.931438] type=2000 audit(1366752893.572:1): initialized
[
0.944007] highmem bounce pool size: 64 pages
[
0.944014] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[
0.946468] VFS: Disk quotas dquot_6.5.2
[
0.946547] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[
0.947454] fuse init (API version 7.16)
[
0.947600] msgmni has been set to 1555
[
0.947875] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2
53)
[
0.947903] io scheduler noop registered
[
0.947905] io scheduler deadline registered
[
0.947924] io scheduler cfq registered (default)
[
0.948373] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[
0.948412] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[
0.948498] intel_idle: MWAIT substates: 0x21120
[
0.948500] intel_idle: v0.4 model 0x2A
[
0.948502] intel_idle: lapic_timer_reliable_states 0xffffffff
[
0.949382] Freeing initrd memory: 12524k freed
[
1.047445] ACPI: Deprecated procfs I/F for AC is loaded, please retry with C
ONFIG_ACPI_PROCFS_POWER cleared

[
1.147275] ACPI: AC Adapter [ADP0] (on-line)
[
1.147398] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/
input/input0
[
1.147402] ACPI: Power Button [PWRB]
[
1.147439] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/
input/input1
[
1.147442] ACPI: Sleep Button [SLPB]
[
1.147479] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/in
put/input2
[
1.151272] ACPI: Lid Switch [LID0]
[
1.151351] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/inp
ut3
[
1.151354] ACPI: Power Button [PWRF]
[
1.151486] ACPI: acpi_idle yielding to intel_idle
[
1.152966] thermal LNXTHERM:00: registered as thermal_zone0
[
1.152969] ACPI: Thermal Zone [TZ00] (45 C)
[
1.153142] thermal LNXTHERM:01: registered as thermal_zone1
[
1.153144] ACPI: Thermal Zone [TZ01] (45 C)
[
1.153187] ERST: Table is not found!
[
1.153248] isapnp: Scanning for PnP cards...
[
1.153288] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[
1.164475] ACPI: Deprecated procfs I/F for battery is loaded, please retry w
ith CONFIG_ACPI_PROCFS_POWER cleared
[
1.164482] ACPI: Battery Slot [BAT0] (battery present)
[
1.506619] isapnp: No Plug & Play device found
[
1.508281] Linux agpgart interface v0.103
[
1.508372] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[
1.508432] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 26
2144K mappable
[
1.509359] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[
1.509468] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[
1.510527] brd: module loaded
[
1.511039] loop: module loaded
[
1.511126] i2c-core: driver [adp5520] using legacy suspend method
[
1.511127] i2c-core: driver [adp5520] using legacy resume method
[
1.511566] Fixed MDIO Bus: probed
[
1.511595] PPP generic driver version 2.4.2
[
1.511628] tun: Universal TUN/TAP device driver, 1.6
[
1.511629] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[
1.511701] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[
1.511717] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[
1.511732] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[
1.511736] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[
1.511765] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus numbe
r 1
[
1.511819] ehci_hcd 0000:00:1a.0: debug port 2
[
1.515712] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[
1.515728] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd170a000
[
1.530660] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[
1.530830] hub 1-0:1.0: USB hub found
[
1.530834] hub 1-0:1.0: 2 ports detected
[
1.530895] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[
1.530907] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[
1.530910] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[
1.530941] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus numbe
r 2
[
1.530988] ehci_hcd 0000:00:1d.0: debug port 2
[
1.534885] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[
1.534898] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xd1709000
[
1.550629] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00

[
1.550786] hub 2-0:1.0: USB hub found
[
1.550789] hub 2-0:1.0: 2 ports detected
[
1.550840] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[
1.550851] uhci_hcd: USB Universal Host Controller Interface driver
[
1.550919] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0
x64 irq 1,12
[
1.558291] serio: i8042 KBD port at 0x60,0x64 irq 1
[
1.558296] serio: i8042 AUX port at 0x60,0x64 irq 12
[
1.558410] mousedev: PS/2 mouse device common for all mice
[
1.558568] rtc_cmos 00:05: RTC can wake from S4
[
1.558690] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[
1.558717] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[
1.558781] device-mapper: uevent: version 1.0.3
[
1.558849] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-d
evel@redhat.com
[
1.558901] device-mapper: multipath: version 1.2.0 loaded
[
1.558904] device-mapper: multipath round-robin: version 1.0.0 loaded
[
1.558958] EISA: Probing bus 0 at eisa.0
[
1.558960] EISA: Cannot allocate resource for mainboard
[
1.558962] Cannot allocate resource for EISA slot 1
[
1.558964] Cannot allocate resource for EISA slot 2
[
1.558966] Cannot allocate resource for EISA slot 3
[
1.558967] Cannot allocate resource for EISA slot 4
[
1.558969] Cannot allocate resource for EISA slot 5
[
1.558971] Cannot allocate resource for EISA slot 6
[
1.558973] Cannot allocate resource for EISA slot 7
[
1.558975] Cannot allocate resource for EISA slot 8
[
1.558976] EISA: Detected 0 cards.
[
1.559164] cpuidle: using governor ladder
[
1.559405] cpuidle: using governor menu
[
1.559601] TCP cubic registered
[
1.559708] NET: Registered protocol family 10
[
1.560129] NET: Registered protocol family 17
[
1.560142] Registering the dns_resolver key type
[
1.560840] Using IPI No-Shortcut mode
[
1.560899] PM: Hibernation image not present or could not be loaded.
[
1.560907] registered taskstats version 1
[
1.561164] Magic number: 9:972:601
[
1.561238] rtc_cmos 00:05: setting system clock to 2013-04-23 21:34:55 UTC (
1366752895)
[
1.561240] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[
1.561241] EDD information not available.
[
1.561433] Freeing unused kernel memory: 720k freed
[
1.561631] Write protecting the kernel text: 5376k
[
1.561698] Write protecting the kernel read-only data: 2196k
[
1.561699] NX-protecting the kernel data: 4864k
[
1.564606] input: AT Translated Set 2 keyboard as /devices/platform/i8042/se
rio0/input/input4
[
1.576413] <30>udev[71]: starting version 167
[
1.809234] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[
1.809259] xhci_hcd 0000:02:00.0: setting latency timer to 64
[
1.809265] xhci_hcd 0000:02:00.0: xHCI Host Controller
[
1.809323] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus numbe
r 3
[
1.815497] ahci 0000:00:1f.2: version 3.0
[
1.815518] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[
1.815564] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[
1.815610] ahci: SSS flag set, parallel bus scan disabled
[
1.815957] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[
1.815971] r8169 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[
[

1.816005] r8169 0000:03:00.0: setting latency timer to 64


1.816011] r8169 0000:03:00.0: (unregistered net_device): unknown MAC, using
family default
[
1.816070] r8169 0000:03:00.0: irq 41 for MSI/MSI-X
[
1.816401] r8169 0000:03:00.0: eth0: RTL8101e at 0xf8468000, 14:fe:b5:c0:31:
e1, XID 00a00000 IRQ 41
[
1.822584] xhci_hcd 0000:02:00.0: irq 18, io mem 0xd1500000
[
1.822665] xhci_hcd 0000:02:00.0: irq 42 for MSI/MSI-X
[
1.822673] xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X
[
1.822679] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
[
1.822685] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
[
1.822690] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
[
1.825880] usb usb3: No SuperSpeed endpoint companion for config 1 interfac
e 0 altsetting 0 ep 129: using minimum values
[
1.825963] xHCI xhci_add_endpoint called for root hub
[
1.825965] xHCI xhci_check_bandwidth called for root hub
[
1.825990] hub 3-0:1.0: USB hub found
[
1.825994] hub 3-0:1.0: 4 ports detected
[
1.830287] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 im
pl SATA mode
[
1.830298] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum
part ems sxs apst
[
1.830310] ahci 0000:00:1f.2: setting latency timer to 64
[
1.842294] usb 1-1: new high speed USB device using ehci_hcd and address 2
[
1.846887] scsi0 : ahci
[
1.847038] scsi1 : ahci
[
1.847174] scsi2 : ahci
[
1.847300] scsi3 : ahci
[
1.847430] scsi4 : ahci
[
1.847511] scsi5 : ahci
[
1.847604] ata1: SATA max UDMA/133 abar m2048@0xd1708000 port 0xd1708100 irq
40
[
1.847607] ata2: SATA max UDMA/133 abar m2048@0xd1708000 port 0xd1708180 irq
40
[
1.847609] ata3: DUMMY
[
1.847610] ata4: DUMMY
[
1.847612] ata5: SATA max UDMA/133 abar m2048@0xd1708000 port 0xd1708300 irq
40
[
1.847613] ata6: DUMMY
[
1.926156] Refined TSC clocksource calibration: 2292.553 MHz.
[
1.926170] Switching to clocksource tsc
[
1.974745] hub 1-1:1.0: USB hub found
[
1.974840] hub 1-1:1.0: 6 ports detected
[
2.085942] usb 2-1: new high speed USB device using ehci_hcd and address 2
[
2.165806] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[
2.218381] hub 2-1:1.0: USB hub found
[
2.218476] hub 2-1:1.0: 8 ports detected
[
2.229740] ata1.00: ATA-8: ST9640320AS, 0002DEM1, max UDMA/133
[
2.229750] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32)
[
2.273439] ata1.00: configured for UDMA/133
[
2.273646] scsi 0:0:0:0: Direct-Access
ATA
ST9640320AS
0002 PQ
: 0 ANSI: 5
[
2.273804] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596
GiB)
[
2.273813] sd 0:0:0:0: Attached scsi generic sg0 type 0
[
2.273873] sd 0:0:0:0: [sda] Write Protect is off
[
2.273876] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[
2.273920] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does
n't support DPO or FUA
[
2.329581] usb 3-4: new high speed USB device using xhci_hcd and address 2

[
2.333944] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[
2.334391] sd 0:0:0:0: [sda] Attached SCSI disk
[
2.347286] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[
2.347654] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[
2.348028] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[
2.348390] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[
2.352000] usbcore: registered new interface driver uas
[
2.421635] usb 1-1.1: new high speed USB device using ehci_hcd and address 3
[
2.536899] Initializing USB Mass Storage driver...
[
2.537014] scsi6 : usb-storage 3-4:1.0
[
2.537133] scsi7 : usb-storage 1-1.1:1.0
[
2.537256] usbcore: registered new interface driver usb-storage
[
2.537258] USB Mass Storage support registered.
[
2.593164] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[
2.595659] ata2.00: ATAPI: PLDS DVDRW/BDROM DS-6E2SH, CD11, max UDMA/100
[
2.597221] ata2.00: configured for UDMA/100
[
2.601231] usb 1-1.4: new high speed USB device using ehci_hcd and address 4
[
2.602934] scsi 1:0:0:0: CD-ROM
PLDS
DVDRWBD DS-6E2SH CD11 PQ
: 0 ANSI: 5
[
2.607524] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda
tray
[
2.607533] cdrom: Uniform CD-ROM driver Revision: 3.20
[
2.607743] sr 1:0:0:0: Attached scsi CD-ROM sr0
[
2.607837] sr 1:0:0:0: Attached scsi generic sg1 type 5
[
2.924676] ata5: SATA link down (SStatus 0 SControl 300)
[
3.060499] usb 2-1.3: new full speed USB device using ehci_hcd and address 3
[
3.170279] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/
usb2/2-1/2-1.3/2-1.3:1.0/input/input5
[
3.170387] generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mou
se [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input0
[
3.172831] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/
usb2/2-1/2-1.3/2-1.3:1.1/input/input6
[
3.173040] generic-usb 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v
1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input1
[
3.173110] usbcore: registered new interface driver usbhid
[
3.173113] usbhid: USB HID core driver
[
3.228249] usb 2-1.5: new full speed USB device using ehci_hcd and address 4
[
3.532715] scsi 6:0:0:0: Direct-Access
SanDisk Cruzer Blade
1.26 PQ
: 0 ANSI: 5
[
3.533108] sd 6:0:0:0: Attached scsi generic sg2 type 0
[
3.533262] sd 6:0:0:0: [sdb] 31266816 512-byte logical blocks: (16.0 GB/14.9
GiB)
[
3.534342] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
[
3.535001] sd 6:0:0:0: [sdb] Write Protect is off
[
3.535004] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[
3.535006] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[
3.535652] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
[
3.536664] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
[
3.537239] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[
3.538023] sdb: sdb1
[
3.538568] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
[
3.538666] scsi 7:0:0:0: Direct-Access
Generic- Multi-Card
1.00 PQ
: 0 ANSI: 0 CCS
[
3.539055] sd 7:0:0:0: Attached scsi generic sg3 type 0
[
3.539092] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[
3.539096] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[
3.725418] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts:
(null)
[
4.489370] sd 7:0:0:0: [sdc] 129759232 512-byte logical blocks: (66.4 GB/61.
8 GiB)

[
4.490229] sd 7:0:0:0: [sdc] Write Protect is off
[
4.490270] sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 00
[
4.490278] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[
4.492721] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[
4.493974] sdc: sdc1
[
4.495975] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[
4.495978] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 22.813031] <30>udev[312]: starting version 167
[ 22.826412] lp: driver loaded but no devices found
[ 22.913176] Adding 6202364k swap on /dev/sda6. Priority:-1 extents:1 across:
6202364k
[ 23.084195] type=1400 audit(1366770917.052:2): apparmor="STATUS" operation="p
rofile_load" name="/sbin/dhclient" pid=479 comm="apparmor_parser"
[ 23.085015] type=1400 audit(1366770917.052:3): apparmor="STATUS" operation="p
rofile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=479 comm="
apparmor_parser"
[ 23.085545] type=1400 audit(1366770917.052:4): apparmor="STATUS" operation="p
rofile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=479 comm="appar
mor_parser"
[ 23.086979] [drm] Initialized drm 1.1.0 20060810
[ 23.118032] cfg80211: Calling CRDA to update world regulatory domain
[ 23.183004] Linux video capture interface: v2.00
[ 23.187781] Bluetooth: Core ver 2.15
[ 23.187806] NET: Registered protocol family 31
[ 23.187807] Bluetooth: HCI device and connection manager initialized
[ 23.187810] Bluetooth: HCI socket layer initialized
[ 23.190677] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 23.191978] usbcore: registered new interface driver btusb
[ 23.200159] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (1bcf
:2b80)
[ 23.231785] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 23.246902] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0
-3.2)
[ 23.248193] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00
:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input7
[ 23.248328] usbcore: registered new interface driver uvcvideo
[ 23.248331] USB Video Class driver (v1.0.0)
[ 23.249860] input: Dell WMI hotkeys as /devices/virtual/input/input8
[ 23.258156] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 23.258161] i915 0000:00:02.0: setting latency timer to 64
[ 23.279879] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[ 23.279885] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 23.279887] [drm] Driver supports precise vblank timestamp query.
[ 23.287636] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree
:
[ 23.287639] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[ 23.287745] iwlagn 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 23.287800] iwlagn 0000:01:00.0: setting latency timer to 64
[ 23.287875] iwlagn 0000:01:00.0: Detected Intel(R) Centrino(R) Wireless-N 103
0 BGN, REV=0xB0
[ 23.303995] iwlagn 0000:01:00.0: device EEPROM VER=0x71a, CALIB=0x6
[ 23.303998] iwlagn 0000:01:00.0: Device SKU: 0X9
[ 23.304001] iwlagn 0000:01:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3
[ 23.304025] iwlagn 0000:01:00.0: Tunable channels: 13 802.11bg, 0 802.11a cha
nnels
[ 23.304348] iwlagn 0000:01:00.0: irq 48 for MSI/MSI-X
[ 23.357452] iwlagn 0000:01:00.0: loaded firmware version 17.168.5.2 build 359
05
[ 23.357764] cfg80211: Ignoring regulatory request Set by core since the drive
r uses its own custom regulatory domain

[ 23.360874] cfg80211: Ignoring regulatory request Set by core since the drive
r uses its own custom regulatory domain
[ 23.360879] cfg80211: World regulatory domain updated:
[ 23.360880] cfg80211:
(start_freq - end_freq @ bandwidth), (max_antenna_g
ain, max_eirp)
[ 23.360883] cfg80211:
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 23.360886] cfg80211:
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 23.360889] cfg80211:
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 23.360892] cfg80211:
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 23.360894] cfg80211:
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 23.368386] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 23.377977] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+me
m,decodes=io+mem:owns=io+mem
[ 23.475977] alps.c: Enabled hardware quirk, falling back to psmouse-core
[ 23.492667] input: ImPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/i
nput/input9
[ 23.558796] fbcon: inteldrmfb (fb0) is primary device
[ 23.558926] Console: switching to colour frame buffer device 200x56
[ 23.558963] fb0: inteldrmfb frame buffer device
[ 23.558965] drm: registered panic notifier
[ 23.586720] acpi device:28: registered as cooling_device4
[ 23.587545] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNX
VIDEO:00/input/input10
[ 23.587676] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 23.587890] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 23.587935] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 2
2
[ 23.587997] HDA Intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 23.588026] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 23.610835] type=1400 audit(1366770917.580:5): apparmor="STATUS" operation="p
rofile_load" name="/usr/share/gdm/guest-session/Xsession" pid=831 comm="apparmor
_parser"
[ 23.611553] type=1400 audit(1366770917.580:6): apparmor="STATUS" operation="p
rofile_load" name="/usr/bin/freshclam" pid=835 comm="apparmor_parser"
[ 23.611821] type=1400 audit(1366770917.580:7): apparmor="STATUS" operation="p
rofile_replace" name="/sbin/dhclient" pid=832 comm="apparmor_parser"
[ 23.614103] type=1400 audit(1366770917.584:8): apparmor="STATUS" operation="p
rofile_load" name="/usr/lib/cups/backend/cups-pdf" pid=836 comm="apparmor_parser
"
[ 23.614306] type=1400 audit(1366770917.584:9): apparmor="STATUS" operation="p
rofile_load" name="/usr/sbin/tcpdump" pid=839 comm="apparmor_parser"
[ 23.615021] type=1400 audit(1366770917.584:10): apparmor="STATUS" operation="
profile_load" name="/usr/sbin/cupsd" pid=836 comm="apparmor_parser"
[ 23.616661] type=1400 audit(1366770917.584:11): apparmor="STATUS" operation="
profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=832 co
mm="apparmor_parser"
[ 23.878345] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 23.922227] r8169 0000:03:00.0: eth0: link down
[ 23.922360] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.136692] hda_codec: ALC269VB: BIOS auto-probing.
[ 24.146173] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/soun
d/card0/input11
[ 24.146262] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.
0/sound/card0/input12
[ 25.196368] /dev/vmmon[1082]: Module vmmon: registered with major=10 minor=16

5
[

25.196376] /dev/vmmon[1082]: Initial HV check: anyNotCapable=0 anyUnlocked=0


anyEnabled=1 anyDisabled=0
[ 25.196382] /dev/vmmon[1082]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnab
led=1 anyDisabled=0
[ 25.196384] /dev/vmmon[1082]: Module vmmon: initialized
[ 25.204239] [1091]: VMCI: shared components initialized.
[ 25.204272] [1091]: VMCI: host components initialized.
[ 25.204333] [1091]: VMCI: Module registered (name=vmci,major=10,minor=56).
[ 25.204336] [1091]: VMCI: Using host personality
[ 25.204338] [1091]: VMCI: Module (name=vmci) is initialized
[ 25.207523] ppdev: user-space parallel port driver
[ 25.908201] wlan0: authenticate with c8:3a:35:3c:79:90 (try 1)
[ 25.910771] wlan0: authenticated
[ 25.911021] wlan0: associate with c8:3a:35:3c:79:90 (try 1)
[ 25.914792] wlan0: RX AssocResp from c8:3a:35:3c:79:90 (capab=0x411 status=0
aid=3)
[ 25.914799] wlan0: associated
[ 25.923878] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 25.923955] cfg80211: Calling CRDA for country: CN
[ 25.926410] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz
width channel with regulatory rule:
[ 25.926413] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 25.926415] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz
width channel with regulatory rule:
[ 25.926417] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 25.926418] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz
width channel with regulatory rule:
[ 25.926420] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 25.926421] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz
width channel with regulatory rule:
[ 25.926423] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 25.926424] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz
width channel with regulatory rule:
[ 25.926426] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 25.926428] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz
width channel with regulatory rule:
[ 25.926429] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 25.926431] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz
width channel with regulatory rule:
[ 25.926433] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 25.926434] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz
width channel with regulatory rule:
[ 25.926436] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 25.926437] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz
width channel with regulatory rule:
[ 25.926439] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 25.926440] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz
width channel with regulatory rule:
[ 25.926442] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 25.926444] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz
width channel with regulatory rule:
[ 25.926445] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 25.926447] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz
width channel with regulatory rule:
[ 25.926448] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 25.926450] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz
width channel with regulatory rule:
[ 25.926452] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 25.926454] cfg80211: Regulatory domain changed to country: CN

[ 25.926455]
ain, max_eirp)
[ 25.926457]
mBm)
[ 25.926459]
mBm)
[ 26.134159]
[ 26.134165]
[ 26.134179]
[ 26.170366]
[ 26.191001]
[ 26.215709]
[ 26.215717]
[ 26.215739]
[ 26.215750]
[ 26.215754]
[ 26.215756]
[ 26.420128]
[ 26.420147]
[ 26.422992]
[ 26.422998]
[ 26.423012]
[ 26.423786]
[ 26.423788]
[ 26.424675]
[ 26.424682]
[ 26.505303]
[ 26.505315]
[ 26.762228]
[ 26.762231]
[ 26.770414]
[ 26.770418]
[ 26.775648]
[ 26.775651]
[ 26.922679]
[ 26.922684]
[ 26.922686]
[ 27.628088]
[ 27.628092]
[ 33.928166]
ad = 5
[ 36.610501]
[ 36.642405]
[ 36.714341]
[ 38.090959]
[ 44.881518]
ad = 0
[ 52.894361]
ad = 7
[ 56.829661]
ad = 10
[ 62.809877]
ad = 2
[ 66.969333]
0 tid = 0
[ 239.176250]
[ 299.207586]
[ 458.972962]
[ 525.467672]
[ 648.122078]

cfg80211:

(start_freq - end_freq @ bandwidth), (max_antenna_g

cfg80211:

(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000

cfg80211:

(5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000

/dev/vmnet: open called by PID 1226 (vmnet-netifup)


/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
Intel AES-NI instructions are not detected.
padlock_aes: VIA PadLock not detected.
/dev/vmnet: open called by PID 1173 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-wlan0: device is wireless, enabling SMAC
bridge-wlan0: up
bridge-wlan0: attached
/dev/vmnet: open called by PID 1228 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 1245 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
userif-3: sent link down event.
userif-3: sent link up event.
/dev/vmnet: open called by PID 1246 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 1250 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
Bluetooth: L2CAP ver 2.15
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
userif-3: sent link down event.
userif-3: sent link up event.
iwlagn 0000:01:00.0: Aggregation not enabled for tid 0 because lo
wlan0: no IPv6 routers present
vmnet8: no IPv6 routers present
vmnet1: no IPv6 routers present
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
iwlagn 0000:01:00.0: Aggregation not enabled for tid 0 because lo
iwlagn 0000:01:00.0: Aggregation not enabled for tid 0 because lo
iwlagn 0000:01:00.0: Aggregation not enabled for tid 0 because lo
iwlagn 0000:01:00.0: Aggregation not enabled for tid 0 because lo
iwlagn 0000:01:00.0: iwlagn_tx_agg_start on ra = c8:3a:35:3c:79:9
iwlagn
iwlagn
iwlagn
iwlagn
iwlagn

0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:

receive
receive
receive
receive
receive

reply
reply
reply
reply
reply

tx
tx
tx
tx
tx

with
with
with
with
with

bt_kill
bt_kill
bt_kill
bt_kill
bt_kill

[ 724.834504]
[ 763.164904]
[ 850.064039]
[ 865.401712]
[ 991.951016]
[ 993.213617]
[ 1098.036222]
[ 1127.450938]
[ 1243.743760]
[ 1386.875732]
[ 1389.432168]
[ 1399.656657]
[ 1429.067598]
[ 1438.000567]
[ 1438.013805]
[ 1531.316149]
[ 1601.600292]
[ 1703.851255]
[ 1754.974975]
[ 1760.124997]
[ 1778.006223]
[ 1812.243423]
[ 1812.243745]
[ 1812.259271]
[ 1812.272478]
[ 1812.272495]
[ 1812.365866]
ry settings
[ 1812.365882]
[ 1812.365893]
[ 1812.372678]
r uses its own
[ 1812.372689]
[ 1812.372693]
ain, max_eirp)
[ 1812.372701]
2000 mBm)
[ 1812.372707]
2000 mBm)
[ 1812.372713]
2000 mBm)
[ 1812.372718]
2000 mBm)
[ 1812.372724]
2000 mBm)
[ 1812.443418]
[ 1812.443422]
[ 1813.103862]
[ 1813.123024]
[ 1813.123195]
[ 1813.244541]
aid=3)
[ 1813.244553]
[ 1813.254723]
[ 1813.262373]
width channel
[ 1813.262383]
[ 1813.262388]
width channel
[ 1813.262395]

iwlagn 0000:01:00.0: receive reply tx with bt_kill


iwlagn 0000:01:00.0: receive reply tx with bt_kill
iwlagn 0000:01:00.0: receive reply tx with bt_kill
iwlagn 0000:01:00.0: receive reply tx with bt_kill
iwlagn 0000:01:00.0: receive reply tx with bt_kill
iwlagn 0000:01:00.0: receive reply tx with bt_kill
iwlagn 0000:01:00.0: receive reply tx with bt_kill
iwlagn 0000:01:00.0: receive reply tx with bt_kill
iwlagn 0000:01:00.0: receive reply tx with bt_kill
iwlagn 0000:01:00.0: receive reply tx with bt_kill
iwlagn 0000:01:00.0: receive reply tx with bt_kill
iwlagn 0000:01:00.0: receive reply tx with bt_kill
iwlagn 0000:01:00.0: receive reply tx with bt_kill
iwlagn 0000:01:00.0: receive reply tx with bt_kill
iwlagn 0000:01:00.0: receive reply tx with bt_kill
iwlagn 0000:01:00.0: receive reply tx with bt_kill
iwlagn 0000:01:00.0: receive reply tx with bt_kill
iwlagn 0000:01:00.0: receive reply tx with bt_kill
iwlagn 0000:01:00.0: receive reply tx with bt_kill
iwlagn 0000:01:00.0: receive reply tx with bt_kill
iwlagn 0000:01:00.0: receive reply tx with bt_kill
wlan0: deauthenticated from c8:3a:35:3c:79:90 (Reason: 3)
bridge-wlan0: disabling the bridge
iwlagn 0000:01:00.0: Stopping AGG while state not ON or starting
bridge-wlan0: down
bridge-wlan0: detached
cfg80211: All devices are disconnected, going to restore regulato
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the drive
custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:
(start_freq - end_freq @ bandwidth), (max_antenna_g
cfg80211:

(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,

cfg80211:

(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,

cfg80211:

(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,

cfg80211:

(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,

cfg80211:

(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,

userif-3: sent link down event.


userif-3: sent link up event.
wlan0: authenticate with c8:3a:35:3c:79:90 (try 1)
wlan0: authenticated
wlan0: associate with c8:3a:35:3c:79:90 (try 1)
wlan0: RX AssocResp from c8:3a:35:3c:79:90 (capab=0x411 status=0
wlan0: associated
cfg80211: Calling CRDA for country: CN
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)

[ 1813.262400]
width channel
[ 1813.262405]
[ 1813.262410]
width channel
[ 1813.262416]
[ 1813.262421]
width channel
[ 1813.262427]
[ 1813.262432]
width channel
[ 1813.262438]
[ 1813.262442]
width channel
[ 1813.262448]
[ 1813.262453]
width channel
[ 1813.262459]
[ 1813.262464]
width channel
[ 1813.262470]
[ 1813.262475]
width channel
[ 1813.262481]
[ 1813.262486]
width channel
[ 1813.262491]
[ 1813.262496]
width channel
[ 1813.262502]
[ 1813.262507]
width channel
[ 1813.262513]
[ 1813.262520]
[ 1813.262524]
ain, max_eirp)
[ 1813.262530]
mBm)
[ 1813.262536]
mBm)
[ 1819.425701]
[ 1819.458069]
ry settings
[ 1819.458083]
[ 1819.458094]
[ 1819.466056]
r uses its own
[ 1819.466068]
[ 1819.466072]
ain, max_eirp)
[ 1819.466080]
2000 mBm)
[ 1819.466086]
2000 mBm)
[ 1819.466092]
2000 mBm)
[ 1819.466097]
2000 mBm)
[ 1819.466103]
2000 mBm)

cfg80211: Updating information on frequency 2422 MHz for a 20 MHz


with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Regulatory domain changed to country: CN
cfg80211:
(start_freq - end_freq @ bandwidth), (max_antenna_g
cfg80211:

(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000

cfg80211:

(5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000

wlan0: deauthenticated from c8:3a:35:3c:79:90 (Reason: 15)


cfg80211: All devices are disconnected, going to restore regulato
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the drive
custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:
(start_freq - end_freq @ bandwidth), (max_antenna_g
cfg80211:

(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,

cfg80211:

(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,

cfg80211:

(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,

cfg80211:

(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,

cfg80211:

(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,

[ 1820.143688]
[ 1820.156409]
[ 1820.156658]
[ 1820.243153]
aid=3)
[ 1820.243165]
[ 1820.255293]
[ 1820.261907]
width channel
[ 1820.261910]
[ 1820.261912]
width channel
[ 1820.261914]
[ 1820.261915]
width channel
[ 1820.261918]
[ 1820.261919]
width channel
[ 1820.261922]
[ 1820.261924]
width channel
[ 1820.261927]
[ 1820.261929]
width channel
[ 1820.261931]
[ 1820.261933]
width channel
[ 1820.261935]
[ 1820.261937]
width channel
[ 1820.261938]
[ 1820.261940]
width channel
[ 1820.261941]
[ 1820.261943]
width channel
[ 1820.261944]
[ 1820.261946]
width channel
[ 1820.261960]
[ 1820.261965]
width channel
[ 1820.261971]
[ 1820.261976]
width channel
[ 1820.261982]
[ 1820.261990]
[ 1820.261994]
ain, max_eirp)
[ 1820.261999]
mBm)
[ 1820.262005]
mBm)
[ 1826.428493]
[ 1826.467672]
ry settings
[ 1826.467685]
[ 1826.467695]
[ 1826.477429]
r uses its own

wlan0:
wlan0:
wlan0:
wlan0:

authenticate with c8:3a:35:3c:79:90 (try 1)


authenticated
associate with c8:3a:35:3c:79:90 (try 1)
RX AssocResp from c8:3a:35:3c:79:90 (capab=0x411 status=0

wlan0: associated
cfg80211: Calling CRDA for country: CN
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Regulatory domain changed to country: CN
cfg80211:
(start_freq - end_freq @ bandwidth), (max_antenna_g
cfg80211:

(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000

cfg80211:

(5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000

wlan0: deauthenticated from c8:3a:35:3c:79:90 (Reason: 15)


cfg80211: All devices are disconnected, going to restore regulato
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the drive
custom regulatory domain

[ 1826.477445]
[ 1826.477452]
ain, max_eirp)
[ 1826.477463]
2000 mBm)
[ 1826.477472]
2000 mBm)
[ 1826.477482]
2000 mBm)
[ 1826.477490]
2000 mBm)
[ 1826.477500]
2000 mBm)
[ 1827.156013]
[ 1827.220364]
[ 1827.222078]
[ 1827.314489]
aid=3)
[ 1827.314493]
[ 1827.324763]
[ 1827.331195]
width channel
[ 1827.331205]
[ 1827.331211]
width channel
[ 1827.331217]
[ 1827.331222]
width channel
[ 1827.331228]
[ 1827.331233]
width channel
[ 1827.331239]
[ 1827.331244]
width channel
[ 1827.331250]
[ 1827.331255]
width channel
[ 1827.331261]
[ 1827.331266]
width channel
[ 1827.331272]
[ 1827.331277]
width channel
[ 1827.331282]
[ 1827.331287]
width channel
[ 1827.331293]
[ 1827.331298]
width channel
[ 1827.331304]
[ 1827.331309]
width channel
[ 1827.331315]
[ 1827.331320]
width channel
[ 1827.331325]
[ 1827.331330]
width channel
[ 1827.331336]
[ 1827.331344]

cfg80211: World regulatory domain updated:


cfg80211:
(start_freq - end_freq @ bandwidth), (max_antenna_g
cfg80211:

(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,

cfg80211:

(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,

cfg80211:

(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,

cfg80211:

(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,

cfg80211:

(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,

wlan0:
wlan0:
wlan0:
wlan0:

authenticate with c8:3a:35:3c:79:90 (try 1)


authenticated
associate with c8:3a:35:3c:79:90 (try 1)
RX AssocResp from c8:3a:35:3c:79:90 (capab=0x411 status=0

wlan0: associated
cfg80211: Calling CRDA for country: CN
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Regulatory domain changed to country: CN

[ 1827.331347]
ain, max_eirp)
[ 1827.331353]
mBm)
[ 1827.331359]
mBm)
[ 1827.842305]
eason=3)
[ 1827.877487]
ry settings
[ 1827.877492]
[ 1827.877496]
[ 1827.880155]
r uses its own
[ 1827.880159]
[ 1827.880160]
ain, max_eirp)
[ 1827.880163]
2000 mBm)
[ 1827.880165]
2000 mBm)
[ 1827.880166]
2000 mBm)
[ 1827.880168]
2000 mBm)
[ 1827.880170]
2000 mBm)
[ 1828.103074]
[ 1828.103081]
[ 1828.538439]
[ 1828.610724]
[ 1828.612480]
[ 1828.777905]
aid=3)
[ 1828.777918]
[ 1828.785966]
[ 1828.788686]
width channel
[ 1828.788689]
[ 1828.788691]
width channel
[ 1828.788692]
[ 1828.788694]
width channel
[ 1828.788696]
[ 1828.788697]
width channel
[ 1828.788699]
[ 1828.788700]
width channel
[ 1828.788702]
[ 1828.788704]
width channel
[ 1828.788705]
[ 1828.788707]
width channel
[ 1828.788708]
[ 1828.788710]
width channel
[ 1828.788712]

cfg80211:

(start_freq - end_freq @ bandwidth), (max_antenna_g

cfg80211:

(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000

cfg80211:

(5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000

wlan0: deauthenticating from c8:3a:35:3c:79:90 by local choice (r


cfg80211: All devices are disconnected, going to restore regulato
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the drive
custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:
(start_freq - end_freq @ bandwidth), (max_antenna_g
cfg80211:

(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,

cfg80211:

(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,

cfg80211:

(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,

cfg80211:

(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,

cfg80211:

(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,

userif-3: sent link down event.


userif-3: sent link up event.
wlan0: authenticate with c8:3a:35:3c:79:90 (try 1)
wlan0: authenticated
wlan0: associate with c8:3a:35:3c:79:90 (try 1)
wlan0: RX AssocResp from c8:3a:35:3c:79:90 (capab=0x411 status=0
wlan0: associated
cfg80211: Calling CRDA for country: CN
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)

[ 1828.788713]
width channel
[ 1828.788715]
[ 1828.788716]
width channel
[ 1828.788718]
[ 1828.788720]
width channel
[ 1828.788721]
[ 1828.788723]
width channel
[ 1828.788725]
[ 1828.788726]
width channel
[ 1828.788728]
[ 1828.788730]
[ 1828.788731]
ain, max_eirp)
[ 1828.788733]
mBm)
[ 1828.788735]
mBm)
[ 1830.675199]
[ 1830.675212]
[ 1830.675244]
[ 1830.675257]
[ 1830.675262]
[ 1830.675576]
[ 1830.874803]
[ 1830.874806]
[ 1845.090203]
[ 1845.090962]
[ 1845.119630]
[ 1845.119647]
[ 1845.169259]
ry settings
[ 1845.169280]
[ 1845.169295]
[ 1845.178251]
r uses its own
[ 1845.178263]
[ 1845.178268]
ain, max_eirp)
[ 1845.178275]
2000 mBm)
[ 1845.178282]
2000 mBm)
[ 1845.178287]
2000 mBm)
[ 1845.178293]
2000 mBm)
[ 1845.178298]
2000 mBm)
[ 1845.290571]
[ 1845.290579]
[ 1845.867999]
[ 1845.948248]
[ 1845.951034]
[ 1846.098223]
aid=3)

cfg80211: Updating information on frequency 2452 MHz for a 20 MHz


with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Regulatory domain changed to country: CN
cfg80211:
(start_freq - end_freq @ bandwidth), (max_antenna_g
cfg80211:

(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000

cfg80211:

(5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000

/dev/vmnet: open called by PID 1173 (vmnet-bridge)


/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-wlan0: device is wireless, enabling SMAC
bridge-wlan0: up
bridge-wlan0: attached
userif-3: sent link down event.
userif-3: sent link up event.
wlan0: deauthenticated from c8:3a:35:3c:79:90 (Reason: 3)
bridge-wlan0: disabling the bridge
bridge-wlan0: down
bridge-wlan0: detached
cfg80211: All devices are disconnected, going to restore regulato
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the drive
custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:
(start_freq - end_freq @ bandwidth), (max_antenna_g
cfg80211:

(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,

cfg80211:

(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,

cfg80211:

(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,

cfg80211:

(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,

cfg80211:

(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,

userif-3: sent link down event.


userif-3: sent link up event.
wlan0: authenticate with c8:3a:35:3c:79:90 (try 1)
wlan0: authenticated
wlan0: associate with c8:3a:35:3c:79:90 (try 1)
wlan0: RX AssocResp from c8:3a:35:3c:79:90 (capab=0x411 status=0

[ 1846.098234] wlan0: associated


[ 1846.111749] cfg80211: Calling CRDA for country: CN
[ 1846.118622] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz
width channel with regulatory rule:
[ 1846.118632] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1846.118638] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz
width channel with regulatory rule:
[ 1846.118644] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1846.118649] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz
width channel with regulatory rule:
[ 1846.118655] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1846.118660] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz
width channel with regulatory rule:
[ 1846.118666] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1846.118671] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz
width channel with regulatory rule:
[ 1846.118677] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1846.118682] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz
width channel with regulatory rule:
[ 1846.118688] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1846.118692] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz
width channel with regulatory rule:
[ 1846.118698] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1846.118703] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz
width channel with regulatory rule:
[ 1846.118709] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1846.118714] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz
width channel with regulatory rule:
[ 1846.118720] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1846.118724] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz
width channel with regulatory rule:
[ 1846.118730] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1846.118735] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz
width channel with regulatory rule:
[ 1846.118741] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1846.118746] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz
width channel with regulatory rule:
[ 1846.118752] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1846.118757] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz
width channel with regulatory rule:
[ 1846.118762] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1846.118770] cfg80211: Regulatory domain changed to country: CN
[ 1846.118773] cfg80211:
(start_freq - end_freq @ bandwidth), (max_antenna_g
ain, max_eirp)
[ 1846.118779] cfg80211:
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm)
[ 1846.118785] cfg80211:
(5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000
mBm)
[ 1852.364852] wlan0: deauthenticated from c8:3a:35:3c:79:90 (Reason: 15)
[ 1852.376025] cfg80211: All devices are disconnected, going to restore regulato
ry settings
[ 1852.376039] cfg80211: Restoring regulatory settings
[ 1852.376049] cfg80211: Calling CRDA to update world regulatory domain
[ 1852.383856] cfg80211: Ignoring regulatory request Set by core since the drive
r uses its own custom regulatory domain
[ 1852.383868] cfg80211: World regulatory domain updated:
[ 1852.383872] cfg80211:
(start_freq - end_freq @ bandwidth), (max_antenna_g
ain, max_eirp)
[ 1852.383879] cfg80211:
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)

[ 1852.383886]
2000 mBm)
[ 1852.383892]
2000 mBm)
[ 1852.383898]
2000 mBm)
[ 1852.383903]
2000 mBm)
[ 1853.009240]
[ 1853.061033]
[ 1853.062727]
[ 1853.259528]
[ 1853.287832]
aid=3)
[ 1853.287844]
[ 1853.303044]
[ 1853.311095]
width channel
[ 1853.311105]
[ 1853.311111]
width channel
[ 1853.311117]
[ 1853.311122]
width channel
[ 1853.311128]
[ 1853.311133]
width channel
[ 1853.311139]
[ 1853.311144]
width channel
[ 1853.311150]
[ 1853.311155]
width channel
[ 1853.311161]
[ 1853.311166]
width channel
[ 1853.311171]
[ 1853.311176]
width channel
[ 1853.311182]
[ 1853.311187]
width channel
[ 1853.311193]
[ 1853.311198]
width channel
[ 1853.311204]
[ 1853.311209]
width channel
[ 1853.311215]
[ 1853.311220]
width channel
[ 1853.311225]
[ 1853.311230]
width channel
[ 1853.311236]
[ 1853.311244]
[ 1853.311247]
ain, max_eirp)
[ 1853.311253]
mBm)

cfg80211:

(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,

cfg80211:

(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,

cfg80211:

(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,

cfg80211:

(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,

wlan0:
wlan0:
wlan0:
wlan0:
wlan0:

authenticate with c8:3a:35:3c:79:90 (try 1)


authenticated
associate with c8:3a:35:3c:79:90 (try 1)
associate with c8:3a:35:3c:79:90 (try 2)
RX AssocResp from c8:3a:35:3c:79:90 (capab=0x411 status=0

wlan0: associated
cfg80211: Calling CRDA for country: CN
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Regulatory domain changed to country: CN
cfg80211:
(start_freq - end_freq @ bandwidth), (max_antenna_g
cfg80211:

(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000

[ 1853.311259]
mBm)
[ 1856.318083]
[ 1856.318109]
[ 1856.318184]
[ 1856.318214]
[ 1856.318227]
[ 1856.318236]
[ 1856.517974]
[ 1856.517984]
[ 1857.476244]
ad = 2
[ 1869.184002]
[ 1869.189345]
[ 1869.190319]
[ 1869.190334]
[ 1869.204318]
ry settings
[ 1869.204333]
[ 1869.204344]
[ 1869.212386]
r uses its own
[ 1869.212397]
[ 1869.212401]
ain, max_eirp)
[ 1869.212409]
2000 mBm)
[ 1869.212415]
2000 mBm)
[ 1869.212421]
2000 mBm)
[ 1869.212426]
2000 mBm)
[ 1869.212432]
2000 mBm)
[ 1869.388935]
[ 1869.388944]
[ 1869.872037]
[ 1869.875206]
[ 1869.880233]
[ 1869.885670]
aid=3)
[ 1869.885675]
[ 1869.899143]
[ 1869.902142]
width channel
[ 1869.902145]
[ 1869.902147]
width channel
[ 1869.902148]
[ 1869.902150]
width channel
[ 1869.902152]
[ 1869.902153]
width channel
[ 1869.902155]
[ 1869.902156]
width channel
[ 1869.902158]
[ 1869.902159]

cfg80211:

(5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000

/dev/vmnet: open called by PID 1173 (vmnet-bridge)


/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-wlan0: device is wireless, enabling SMAC
bridge-wlan0: up
bridge-wlan0: attached
userif-3: sent link down event.
userif-3: sent link up event.
iwlagn 0000:01:00.0: Aggregation not enabled for tid 0 because lo
wlan0: deauthenticated from c8:3a:35:3c:79:90 (Reason: 3)
bridge-wlan0: disabling the bridge
bridge-wlan0: down
bridge-wlan0: detached
cfg80211: All devices are disconnected, going to restore regulato
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the drive
custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:
(start_freq - end_freq @ bandwidth), (max_antenna_g
cfg80211:

(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,

cfg80211:

(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,

cfg80211:

(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,

cfg80211:

(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,

cfg80211:

(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,

userif-3: sent link down event.


userif-3: sent link up event.
wlan0: authenticate with c8:3a:35:3c:79:90 (try 1)
wlan0: authenticated
wlan0: associate with c8:3a:35:3c:79:90 (try 1)
wlan0: RX AssocResp from c8:3a:35:3c:79:90 (capab=0x411 status=0
wlan0: associated
cfg80211: Calling CRDA for country: CN
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz

width channel with regulatory rule:


[ 1869.902161] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1869.902163] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz
width channel with regulatory rule:
[ 1869.902164] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1869.902166] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz
width channel with regulatory rule:
[ 1869.902168] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1869.902169] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz
width channel with regulatory rule:
[ 1869.902171] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1869.902172] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz
width channel with regulatory rule:
[ 1869.902174] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1869.902175] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz
width channel with regulatory rule:
[ 1869.902177] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1869.902179] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz
width channel with regulatory rule:
[ 1869.902180] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1869.902182] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz
width channel with regulatory rule:
[ 1869.902184] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1869.902186] cfg80211: Regulatory domain changed to country: CN
[ 1869.902187] cfg80211:
(start_freq - end_freq @ bandwidth), (max_antenna_g
ain, max_eirp)
[ 1869.902189] cfg80211:
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm)
[ 1869.902191] cfg80211:
(5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000
mBm)
[ 1870.139190] /dev/vmnet: open called by PID 1173 (vmnet-bridge)
[ 1870.139218] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 1870.139298] /dev/vmnet: port on hub 0 successfully opened
[ 1870.139328] bridge-wlan0: device is wireless, enabling SMAC
[ 1870.139339] bridge-wlan0: up
[ 1870.139454] bridge-wlan0: attached
[ 1870.339045] userif-3: sent link down event.
[ 1870.339054] userif-3: sent link up event.
[ 1883.107469] bridge-wlan0: disabling the bridge
[ 1883.139062] bridge-wlan0: down
[ 1883.139079] bridge-wlan0: detached
[ 1883.194635] cfg80211: All devices are disconnected, going to restore regulato
ry settings
[ 1883.194651] cfg80211: Restoring regulatory settings
[ 1883.194664] cfg80211: Calling CRDA to update world regulatory domain
[ 1883.199279] cfg80211: Ignoring regulatory request Set by core since the drive
r uses its own custom regulatory domain
[ 1883.199283] cfg80211: World regulatory domain updated:
[ 1883.199284] cfg80211:
(start_freq - end_freq @ bandwidth), (max_antenna_g
ain, max_eirp)
[ 1883.199286] cfg80211:
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 1883.199288] cfg80211:
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 1883.199290] cfg80211:
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 1883.199291] cfg80211:
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 1883.199293] cfg80211:
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)

[ 1883.307082]
[ 1883.307091]
[ 1883.895867]
[ 1883.898371]
[ 1883.898591]
[ 1883.902472]
aid=3)
[ 1883.902481]
[ 1883.915146]
[ 1883.923168]
width channel
[ 1883.923178]
[ 1883.923184]
width channel
[ 1883.923190]
[ 1883.923195]
width channel
[ 1883.923201]
[ 1883.923206]
width channel
[ 1883.923212]
[ 1883.923217]
width channel
[ 1883.923223]
[ 1883.923227]
width channel
[ 1883.923234]
[ 1883.923239]
width channel
[ 1883.923245]
[ 1883.923250]
width channel
[ 1883.923256]
[ 1883.923261]
width channel
[ 1883.923267]
[ 1883.923271]
width channel
[ 1883.923277]
[ 1883.923282]
width channel
[ 1883.923288]
[ 1883.923293]
width channel
[ 1883.923299]
[ 1883.923303]
width channel
[ 1883.923309]
[ 1883.923317]
[ 1883.923321]
ain, max_eirp)
[ 1883.923327]
mBm)
[ 1883.923332]
mBm)
[ 1884.146066]
[ 1884.146093]
[ 1884.146166]
[ 1884.146195]
[ 1884.146206]

userif-3: sent link down event.


userif-3: sent link up event.
wlan0: authenticate with c8:3a:35:3c:79:90 (try 1)
wlan0: authenticated
wlan0: associate with c8:3a:35:3c:79:90 (try 1)
wlan0: RX AssocResp from c8:3a:35:3c:79:90 (capab=0x411 status=0
wlan0: associated
cfg80211: Calling CRDA for country: CN
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Regulatory domain changed to country: CN
cfg80211:
(start_freq - end_freq @ bandwidth), (max_antenna_g
cfg80211:

(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000

cfg80211:

(5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000

/dev/vmnet: open called by PID 1173 (vmnet-bridge)


/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-wlan0: device is wireless, enabling SMAC
bridge-wlan0: up

[ 1884.146215]
[ 1884.345910]
[ 1884.345919]
[ 1915.044040]
[ 1915.044793]
[ 1915.079997]
[ 1915.080012]
[ 1915.121258]
ry settings
[ 1915.121272]
[ 1915.121282]
[ 1915.129009]
r uses its own
[ 1915.129014]
[ 1915.129016]
ain, max_eirp)
[ 1915.129019]
2000 mBm)
[ 1915.129022]
2000 mBm)
[ 1915.129025]
2000 mBm)
[ 1915.129027]
2000 mBm)
[ 1915.129029]
2000 mBm)
[ 1915.244305]
[ 1915.244314]
[ 1915.746218]
[ 1915.763977]
[ 1915.764322]
[ 1915.862266]
aid=3)
[ 1915.862306]
[ 1915.877443]
[ 1915.885931]
width channel
[ 1915.885942]
[ 1915.885948]
width channel
[ 1915.885954]
[ 1915.885959]
width channel
[ 1915.885965]
[ 1915.885970]
width channel
[ 1915.885975]
[ 1915.885980]
width channel
[ 1915.885986]
[ 1915.885991]
width channel
[ 1915.885997]
[ 1915.886002]
width channel
[ 1915.886008]
[ 1915.886013]
width channel
[ 1915.886019]
[ 1915.886024]

bridge-wlan0: attached
userif-3: sent link down event.
userif-3: sent link up event.
wlan0: deauthenticated from c8:3a:35:3c:79:90 (Reason: 3)
bridge-wlan0: disabling the bridge
bridge-wlan0: down
bridge-wlan0: detached
cfg80211: All devices are disconnected, going to restore regulato
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the drive
custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:
(start_freq - end_freq @ bandwidth), (max_antenna_g
cfg80211:

(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,

cfg80211:

(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,

cfg80211:

(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,

cfg80211:

(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,

cfg80211:

(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,

userif-3: sent link down event.


userif-3: sent link up event.
wlan0: authenticate with c8:3a:35:3c:79:90 (try 1)
wlan0: authenticated
wlan0: associate with c8:3a:35:3c:79:90 (try 1)
wlan0: RX AssocResp from c8:3a:35:3c:79:90 (capab=0x411 status=0
wlan0: associated
cfg80211: Calling CRDA for country: CN
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz

width channel with regulatory rule:


[ 1915.886030] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1915.886035] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz
width channel with regulatory rule:
[ 1915.886041] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1915.886046] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz
width channel with regulatory rule:
[ 1915.886051] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1915.886056] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz
width channel with regulatory rule:
[ 1915.886062] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1915.886067] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz
width channel with regulatory rule:
[ 1915.886073] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1915.886081] cfg80211: Regulatory domain changed to country: CN
[ 1915.886084] cfg80211:
(start_freq - end_freq @ bandwidth), (max_antenna_g
ain, max_eirp)
[ 1915.886090] cfg80211:
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm)
[ 1915.886096] cfg80211:
(5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000
mBm)
[ 1917.141438] /dev/vmnet: open called by PID 1173 (vmnet-bridge)
[ 1917.141448] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 1917.141470] /dev/vmnet: port on hub 0 successfully opened
[ 1917.141479] bridge-wlan0: device is wireless, enabling SMAC
[ 1917.141483] bridge-wlan0: up
[ 1917.141486] bridge-wlan0: attached
[ 1917.341429] userif-3: sent link down event.
[ 1917.341441] userif-3: sent link up event.
[ 1918.109172] wlan0: deauthenticated from c8:3a:35:3c:79:90 (Reason: 2)
[ 1918.110677] bridge-wlan0: disabling the bridge
[ 1918.138930] bridge-wlan0: down
[ 1918.138949] bridge-wlan0: detached
[ 1918.203476] cfg80211: All devices are disconnected, going to restore regulato
ry settings
[ 1918.203497] cfg80211: Restoring regulatory settings
[ 1918.203512] cfg80211: Calling CRDA to update world regulatory domain
[ 1918.211416] cfg80211: Ignoring regulatory request Set by core since the drive
r uses its own custom regulatory domain
[ 1918.211428] cfg80211: World regulatory domain updated:
[ 1918.211433] cfg80211:
(start_freq - end_freq @ bandwidth), (max_antenna_g
ain, max_eirp)
[ 1918.211440] cfg80211:
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 1918.211446] cfg80211:
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 1918.211452] cfg80211:
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 1918.211457] cfg80211:
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 1918.211463] cfg80211:
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 1918.310321] userif-3: sent link down event.
[ 1918.310331] userif-3: sent link up event.
[ 1918.959961] wlan0: authenticate with c8:3a:35:3c:79:90 (try 1)
[ 1918.962494] wlan0: authenticated
[ 1918.962751] wlan0: associate with c8:3a:35:3c:79:90 (try 1)
[ 1918.966748] wlan0: RX AssocResp from c8:3a:35:3c:79:90 (capab=0x411 status=0
aid=3)
[ 1918.966758] wlan0: associated

[ 1918.977546] cfg80211: Calling CRDA for country: CN


[ 1918.985407] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz
width channel with regulatory rule:
[ 1918.985417] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1918.985423] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz
width channel with regulatory rule:
[ 1918.985429] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1918.985434] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz
width channel with regulatory rule:
[ 1918.985440] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1918.985445] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz
width channel with regulatory rule:
[ 1918.985451] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1918.985456] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz
width channel with regulatory rule:
[ 1918.985462] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1918.985467] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz
width channel with regulatory rule:
[ 1918.985473] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1918.985477] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz
width channel with regulatory rule:
[ 1918.985483] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1918.985488] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz
width channel with regulatory rule:
[ 1918.985494] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1918.985499] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz
width channel with regulatory rule:
[ 1918.985505] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1918.985509] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz
width channel with regulatory rule:
[ 1918.985515] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1918.985520] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz
width channel with regulatory rule:
[ 1918.985526] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1918.985531] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz
width channel with regulatory rule:
[ 1918.985537] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1918.985541] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz
width channel with regulatory rule:
[ 1918.985547] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1918.985555] cfg80211: Regulatory domain changed to country: CN
[ 1918.985558] cfg80211:
(start_freq - end_freq @ bandwidth), (max_antenna_g
ain, max_eirp)
[ 1918.985564] cfg80211:
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm)
[ 1918.985570] cfg80211:
(5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000
mBm)
[ 1919.187073] /dev/vmnet: open called by PID 1173 (vmnet-bridge)
[ 1919.187101] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 1919.187176] /dev/vmnet: port on hub 0 successfully opened
[ 1919.187203] bridge-wlan0: device is wireless, enabling SMAC
[ 1919.187216] bridge-wlan0: up
[ 1919.187554] bridge-wlan0: attached
[ 1919.386835] userif-3: sent link down event.
[ 1919.386844] userif-3: sent link up event.
[ 1922.850632] bridge-wlan0: disabling the bridge
[ 1922.880223] bridge-wlan0: down
[ 1922.880247] bridge-wlan0: detached
[ 1922.940336] cfg80211: All devices are disconnected, going to restore regulato
ry settings

[ 1922.940351]
[ 1922.940362]
[ 1922.948534]
r uses its own
[ 1922.948546]
[ 1922.948550]
ain, max_eirp)
[ 1922.948558]
2000 mBm)
[ 1922.948564]
2000 mBm)
[ 1922.948570]
2000 mBm)
[ 1922.948575]
2000 mBm)
[ 1922.948581]
2000 mBm)
[ 1923.050382]
[ 1923.050391]
[ 1923.631718]
[ 1923.634294]
[ 1923.634536]
[ 1923.638376]
aid=3)
[ 1923.638386]
[ 1923.652300]
[ 1923.660763]
width channel
[ 1923.660773]
[ 1923.660779]
width channel
[ 1923.660785]
[ 1923.660790]
width channel
[ 1923.660796]
[ 1923.660801]
width channel
[ 1923.660807]
[ 1923.660812]
width channel
[ 1923.660818]
[ 1923.660823]
width channel
[ 1923.660828]
[ 1923.660833]
width channel
[ 1923.660839]
[ 1923.660844]
width channel
[ 1923.660850]
[ 1923.660855]
width channel
[ 1923.660861]
[ 1923.660866]
width channel
[ 1923.660872]
[ 1923.660877]
width channel
[ 1923.660882]
[ 1923.660887]

cfg80211: Restoring regulatory settings


cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the drive
custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:
(start_freq - end_freq @ bandwidth), (max_antenna_g
cfg80211:

(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,

cfg80211:

(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,

cfg80211:

(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,

cfg80211:

(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,

cfg80211:

(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,

userif-3: sent link down event.


userif-3: sent link up event.
wlan0: authenticate with c8:3a:35:3c:79:90 (try 1)
wlan0: authenticated
wlan0: associate with c8:3a:35:3c:79:90 (try 1)
wlan0: RX AssocResp from c8:3a:35:3c:79:90 (capab=0x411 status=0
wlan0: associated
cfg80211: Calling CRDA for country: CN
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz

width channel with regulatory rule:


[ 1923.660893] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1923.660898] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz
width channel with regulatory rule:
[ 1923.660904] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1923.660911] cfg80211: Regulatory domain changed to country: CN
[ 1923.660915] cfg80211:
(start_freq - end_freq @ bandwidth), (max_antenna_g
ain, max_eirp)
[ 1923.660921] cfg80211:
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm)
[ 1923.660927] cfg80211:
(5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000
mBm)
[ 1923.870477] /dev/vmnet: open called by PID 1173 (vmnet-bridge)
[ 1923.870504] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 1923.870583] /dev/vmnet: port on hub 0 successfully opened
[ 1923.870615] bridge-wlan0: device is wireless, enabling SMAC
[ 1923.870627] bridge-wlan0: up
[ 1923.870637] bridge-wlan0: attached
[ 1924.070513] userif-3: sent link down event.
[ 1924.070522] userif-3: sent link up event.
[ 1925.516206] bridge-wlan0: disabling the bridge
[ 1925.547914] bridge-wlan0: down
[ 1925.547929] bridge-wlan0: detached
[ 1925.639963] cfg80211: All devices are disconnected, going to restore regulato
ry settings
[ 1925.639981] cfg80211: Restoring regulatory settings
[ 1925.639994] cfg80211: Calling CRDA to update world regulatory domain
[ 1925.648110] cfg80211: Ignoring regulatory request Set by core since the drive
r uses its own custom regulatory domain
[ 1925.648123] cfg80211: World regulatory domain updated:
[ 1925.648127] cfg80211:
(start_freq - end_freq @ bandwidth), (max_antenna_g
ain, max_eirp)
[ 1925.648134] cfg80211:
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 1925.648140] cfg80211:
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 1925.648146] cfg80211:
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 1925.648152] cfg80211:
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 1925.648157] cfg80211:
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 1925.715870] userif-3: sent link down event.
[ 1925.715882] userif-3: sent link up event.
[ 1926.305595] wlan0: authenticate with c8:3a:35:3c:79:90 (try 1)
[ 1926.502531] wlan0: authenticate with c8:3a:35:3c:79:90 (try 2)
[ 1926.702265] wlan0: authenticate with c8:3a:35:3c:79:90 (try 3)
[ 1926.901942] wlan0: authentication with c8:3a:35:3c:79:90 timed out
[ 1940.874018] userif-3: sent link down event.
[ 1940.874027] userif-3: sent link up event.
[ 1964.600939] wlan0: authenticate with c8:3a:35:3c:79:90 (try 1)
[ 1964.603647] wlan0: authenticated
[ 1964.603860] wlan0: associate with c8:3a:35:3c:79:90 (try 1)
[ 1964.607798] wlan0: RX AssocResp from c8:3a:35:3c:79:90 (capab=0x411 status=0
aid=1)
[ 1964.607811] wlan0: associated
[ 1964.622170] cfg80211: Calling CRDA for country: CN
[ 1964.625093] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz
width channel with regulatory rule:
[ 1964.625096] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)

[ 1964.625097]
width channel
[ 1964.625099]
[ 1964.625101]
width channel
[ 1964.625102]
[ 1964.625104]
width channel
[ 1964.625106]
[ 1964.625107]
width channel
[ 1964.625109]
[ 1964.625110]
width channel
[ 1964.625112]
[ 1964.625113]
width channel
[ 1964.625115]
[ 1964.625117]
width channel
[ 1964.625119]
[ 1964.625120]
width channel
[ 1964.625122]
[ 1964.625123]
width channel
[ 1964.625125]
[ 1964.625126]
width channel
[ 1964.625128]
[ 1964.625129]
width channel
[ 1964.625131]
[ 1964.625133]
width channel
[ 1964.625134]
[ 1964.625137]
[ 1964.625138]
ain, max_eirp)
[ 1964.625139]
mBm)
[ 1964.625141]
mBm)
[ 1964.834897]
[ 1964.834924]
[ 1964.834993]
[ 1964.835021]
[ 1964.835033]
[ 1964.835042]
[ 1965.034663]
[ 1965.034672]
[ 1969.624135]
[ 1969.624144]
[ 1981.677492]
ad = 2
[ 1985.063351]
0 tid = 0
[ 2050.235540]
[ 2096.247371]
[ 2109.030247]

cfg80211: Updating information on frequency 2417 MHz for a 20 MHz


with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz
with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Regulatory domain changed to country: CN
cfg80211:
(start_freq - end_freq @ bandwidth), (max_antenna_g
cfg80211:

(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000

cfg80211:

(5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000

/dev/vmnet: open called by PID 1173 (vmnet-bridge)


/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-wlan0: device is wireless, enabling SMAC
bridge-wlan0: up
bridge-wlan0: attached
userif-3: sent link down event.
userif-3: sent link up event.
userif-3: sent link down event.
userif-3: sent link up event.
iwlagn 0000:01:00.0: Aggregation not enabled for tid 0 because lo
iwlagn 0000:01:00.0: iwlagn_tx_agg_start on ra = c8:3a:35:3c:79:9
iwlagn 0000:01:00.0: receive reply tx with bt_kill
iwlagn 0000:01:00.0: receive reply tx with bt_kill
iwlagn 0000:01:00.0: receive reply tx with bt_kill

[ 2140.981234] iwlagn 0000:01:00.0:


[ 2160.152941] iwlagn 0000:01:00.0:
[ 2217.670613] iwlagn 0000:01:00.0:
[ 2268.791752] iwlagn 0000:01:00.0:
[ 2355.690938] iwlagn 0000:01:00.0:
[ 2698.229476] iwlagn 0000:01:00.0:
[ 2704.657852] iwlagn 0000:01:00.0:
[ 2754.467942] iwlagn 0000:01:00.0:
[ 2786.433182] iwlagn 0000:01:00.0:
[ 2881.014920] iwlagn 0000:01:00.0:
[ 2905.298594] iwlagn 0000:01:00.0:
[ 2958.981182] iwlagn 0000:01:00.0:
[ 3063.787780] iwlagn 0000:01:00.0:
[ 3378.189818] iwlagn 0000:01:00.0:
[ 3550.760969] iwlagn 0000:01:00.0:
[ 3566.728410] iwlagn 0000:01:00.0:
000000.
[ 3566.728426] iwlagn 0000:01:00.0:
905
[ 3566.728480] iwlagn 0000:01:00.0:
[ 3566.728490] iwlagn 0000:01:00.0:
[ 3566.728682] iwlagn 0000:01:00.0:
data1
data2
line
[ 3566.728698] iwlagn 0000:01:00.0:
8851 0x000000FE 0x0000001A 1583
[ 3566.728707] iwlagn 0000:01:00.0:
[ 3566.728720] iwlagn 0000:01:00.0:
001C
[ 3566.728729] iwlagn 0000:01:00.0:
[ 3566.728736] iwlagn 0000:01:00.0:
ERIODIC_REG)
[ 3566.728774] iwlagn 0000:01:00.0:
[ 3566.728809] iwlagn 0000:01:00.0:
[ 3566.728843] iwlagn 0000:01:00.0:
[ 3566.728878] iwlagn 0000:01:00.0:
[ 3566.728913] iwlagn 0000:01:00.0:
[ 3566.728948] iwlagn 0000:01:00.0:
[ 3566.728984] iwlagn 0000:01:00.0:
[ 3566.729019] iwlagn 0000:01:00.0:
[ 3566.729054] iwlagn 0000:01:00.0:
[ 3566.729089] iwlagn 0000:01:00.0:
[ 3566.729124] iwlagn 0000:01:00.0:
[ 3566.729159] iwlagn 0000:01:00.0:
[ 3566.729194] iwlagn 0000:01:00.0:
[ 3566.729229] iwlagn 0000:01:00.0:
[ 3566.729264] iwlagn 0000:01:00.0:
[ 3566.729299] iwlagn 0000:01:00.0:
[ 3566.729357] iwlagn 0000:01:00.0:
[ 3566.729391] iwlagn 0000:01:00.0:
[ 3566.729426] iwlagn 0000:01:00.0:
[ 3566.729461] iwlagn 0000:01:00.0:
[ 3566.729495] iwlagn 0000:01:00.0:
[ 3566.729530] iwlagn 0000:01:00.0:
[ 3566.729565] iwlagn 0000:01:00.0:
[ 3566.729573] iwlagn 0000:01:00.0:
[ 3566.729617] iwlagn 0000:01:00.0:
1700
[ 3566.729660] iwlagn 0000:01:00.0:
9fd0
[ 3566.729704] iwlagn 0000:01:00.0:

receive reply tx with bt_kill


receive reply tx with bt_kill
receive reply tx with bt_kill
receive reply tx with bt_kill
receive reply tx with bt_kill
receive reply tx with bt_kill
receive reply tx with bt_kill
receive reply tx with bt_kill
receive reply tx with bt_kill
receive reply tx with bt_kill
receive reply tx with bt_kill
receive reply tx with bt_kill
receive reply tx with bt_kill
receive reply tx with bt_kill
receive reply tx with bt_kill
Microcode SW error detected. Restarting 0x2
Loaded firmware version: 17.168.5.2 build 35
Start IWL Error Log Dump:
Status: 0x000212E4, count: 6
Desc
ADVANCED_SYSASSERT

Time
(0x1041) 161971

pc
blink1 blink2 ilink1 ilink2 hcmd
0x19938 0x197E0 0x197E0 0x0DC1A 0x00000 0x81
CSR values:
(2nd byte of CSR_INT_COALESCING is CSR_INT_P
CSR_HW_IF_CONFIG_REG: 0X00c80303
CSR_INT_COALESCING: 0X0000ff40
CSR_INT: 0X00000000
CSR_INT_MASK: 0X00000000
CSR_FH_INT_STATUS: 0X00000000
CSR_GPIO_IN: 0X0000003c
CSR_RESET: 0X00000000
CSR_GP_CNTRL: 0X080403c5
CSR_HW_REV: 0X000000b0
CSR_EEPROM_REG: 0Xe0600ffd
CSR_EEPROM_GP: 0X90000801
CSR_OTP_GP_REG: 0X00030001
CSR_GIO_REG: 0X00080042
CSR_GP_UCODE_REG: 0X00008a6a
CSR_GP_DRIVER_REG: 0X00000000
CSR_UCODE_DRV_GP1: 0X00000000
CSR_UCODE_DRV_GP2: 0X00000000
CSR_LED_REG: 0X00000058
CSR_DRAM_INT_TBL_REG: 0X8802b8d2
CSR_GIO_CHICKEN_BITS: 0X27800200
CSR_ANA_PLL_CFG: 0X00000000
CSR_HW_REV_WA_REG: 0X0001001a
CSR_DBG_HPET_MEM_REG: 0Xffff0010
FH register values:
FH_RSCSR_CHNL0_STTS_WPTR_REG: 0X02b4
FH_RSCSR_CHNL0_RBDCB_BASE_REG: 0X002b
FH_RSCSR_CHNL0_WPTR: 0X0000

0060
[ 3566.729748] iwlagn
9104
[ 3566.729792] iwlagn
00fc
[ 3566.729836] iwlagn
0000
[ 3566.729880] iwlagn
0000
[ 3566.729924] iwlagn
0001
[ 3566.729967] iwlagn
0000
[ 3566.730054] iwlagn
tries
[ 3566.730106] iwlagn
[ 3566.730147] iwlagn
[ 3566.730188] iwlagn
[ 3566.730236] iwlagn
[ 3566.730277] iwlagn
[ 3566.730318] iwlagn
[ 3566.730359] iwlagn
[ 3566.730401] iwlagn
[ 3566.730442] iwlagn
[ 3566.730483] iwlagn
[ 3566.730535] iwlagn
[ 3566.730575] iwlagn
[ 3566.730614] iwlagn
[ 3566.730663] iwlagn
[ 3566.730711] iwlagn
[ 3566.730752] iwlagn
[ 3566.730794] iwlagn
[ 3566.730835] iwlagn
[ 3566.730876] iwlagn
[ 3566.730918] iwlagn
[ 3566.735739] iwlagn
l 1 [0x07fd0001]
[ 3566.804435] iwlagn
[ 3566.804452] iwlagn
19
[ 3574.769428] iwlagn
0 tid = 0
[ 3718.171852] iwlagn
[ 3739.911855] iwlagn
[ 3760.365454] iwlagn
[ 4408.376175] iwlagn
[ 4462.052303] iwlagn
[ 4564.305374] iwlagn
[ 4809.691861] iwlagn
[ 4855.715149] iwlagn
[ 4871.038217] iwlagn
[ 4871.051995] iwlagn
[ 4883.820046] iwlagn
[ 4941.372458] iwlagn
[ 5837.051632] iwlagn
ad = 0
[ 5851.835707] iwlagn
ad = 0
[ 6592.873377] iwlagn
ad = 0

0000:01:00.0:

FH_MEM_RCSR_CHNL0_CONFIG_REG: 0X8081

0000:01:00.0:

FH_MEM_RSSR_SHARED_CTRL_REG: 0X0000

0000:01:00.0:

FH_MEM_RSSR_RX_STATUS_REG: 0X0303

0000:01:00.0:

FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 0X0000

0000:01:00.0:

FH_TSSR_TX_STATUS_REG: 0X07fd

0000:01:00.0:

FH_TSSR_TX_ERROR_REG: 0X0000

0000:01:00.0: Start IWL Event Log Dump: display last 20 en


0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:

EVT_LOGT:3511432523:0x00000040:1243
EVT_LOGT:3511432536:0x00000100:1243
EVT_LOGT:3511432959:0x00000400:1243
EVT_LOGT:3511432962:0x00000080:1243
EVT_LOGT:3511432962:0x00040000:1243
EVT_LOGT:3511432983:0x00000040:1243
EVT_LOGT:3511432996:0x00000100:1243
EVT_LOGT:3511433419:0x00000400:1243
EVT_LOGT:3511433422:0x00000080:1243
EVT_LOGT:3511433422:0x00040000:1243
EVT_LOGT:3511433452:0x00000040:1243
EVT_LOGT:3511433465:0x00000100:1243
EVT_LOGT:3511434184:0x00000400:1243
EVT_LOGT:3511434366:0x00000080:1243
EVT_LOGT:3511434367:0x00040000:1243
EVT_LOGT:3511434432:0x00000040:1243
EVT_LOGT:3511434445:0x00000100:1243
EVT_LOGT:3511434883:0x00002000:1243
EVT_LOGT:3511434884:0x00004000:1243
EVT_LOGT:3511434914:0x00000000:0125
Failing on timeout while stopping DMA channe

0000:01:00.0: Stopping AGG while state not ON or starting


0000:01:00.0: queue number out of range: 0, must be 10 to
0000:01:00.0: iwlagn_tx_agg_start on ra = c8:3a:35:3c:79:9
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:
0000:01:00.0:

receive reply tx with bt_kill


receive reply tx with bt_kill
receive reply tx with bt_kill
receive reply tx with bt_kill
receive reply tx with bt_kill
receive reply tx with bt_kill
receive reply tx with bt_kill
receive reply tx with bt_kill
receive reply tx with bt_kill
receive reply tx with bt_kill
receive reply tx with bt_kill
receive reply tx with bt_kill
Aggregation not enabled for tid 6 because lo

0000:01:00.0: Aggregation not enabled for tid 6 because lo


0000:01:00.0: Aggregation not enabled for tid 6 because lo

[
[
[
[
[
[
[
[
[
[
[

7077.092586]
7296.930314]
7493.081214]
7493.780434]
7493.799167]
7721.269762]
7915.547814]
7918.105512]
7933.435872]
8012.050591]
8023.732098]

iwlagn 0000:01:00.0: receive reply


iwlagn 0000:01:00.0: receive reply
iwlagn 0000:01:00.0: receive reply
iwlagn 0000:01:00.0: receive reply
iwlagn 0000:01:00.0: receive reply
iwlagn 0000:01:00.0: receive reply
iwlagn 0000:01:00.0: receive reply
iwlagn 0000:01:00.0: receive reply
iwlagn 0000:01:00.0: receive reply
dell-wmi: Unknown key 3a pressed
dell-wmi: Unknown key 3a pressed

tx
tx
tx
tx
tx
tx
tx
tx
tx

with
with
with
with
with
with
with
with
with

bt_kill
bt_kill
bt_kill
bt_kill
bt_kill
bt_kill
bt_kill
bt_kill
bt_kill

You might also like