Professional Documents
Culture Documents
Command 3d
Command 3d
@20,14
Command: Command: Command: _region Select objects: Specify opposite corner: 1 found
Select objects:
1 loop extracted.
1 Region created.
Command: Command: Command: _extrude Current wire frame density: ISOLINES=4 Select objects: 1 found
Select objects:
History 3D
Command: Command: Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: Specify radius of circle or [Diameter]: 6 Command: Command: Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: Specify radius of circle or [Diameter] <6.0000>: 8 Command: Command: Command: _line Specify first point: _mid of Specify next point or [Undo]: <Ortho on> <Osnap off> Specify next point or [Undo]: Command: Command: Command: _region Select objects: Specify opposite corner: 1 found Select objects: 1 loop extracted. 1 Region created. Command: Command: Command: _region Select objects: Specify opposite corner: 1 found Select objects: 1 loop extracted.
1 Region created. Command: Command: Command: _extrude Current wire frame density: ISOLINES=4 Select objects: 1 found Select objects: Specify height of extrusion or [Path]: 17 Specify angle of taper for extrusion <0>: Command: Command: Command: _extrude Current wire frame density: ISOLINES=4 Select objects: 1 found Select objects: Specify height of extrusion or [Path]: Specify angle of taper for extrusion <0>: Command: _rectang Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: Specify other corner point or [Dimensions]: @20,14 Command: Command: Command: _region Select objects: Specify opposite corner: 1 found Select objects: 1 loop extracted. 1 Region created. Command: Command: Command: _extrude
Current wire frame density: ISOLINES=4 Select objects: 1 found Select objects: Specify height of extrusion or [Path]: 7 Specify angle of taper for extrusion <0>: Command: Command: Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: Specify radius of circle or [Diameter]: 6 Command: Command: Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: Specify radius of circle or [Diameter] <6.0000>: 8
Command: Command: Command: _line Specify first point: _mid of Specify next point or [Undo]: <Ortho on> <Osnap off> Specify next point or [Undo]: Command: _region Select objects: Specify opposite corner: 1 found Select objects: 1 loop extracted. 1 Region created. Command: Command: Command: _region Select objects: Specify opposite corner: 1 found
Select objects: 1 loop extracted. 1 Region created. Command: Command: Command: _extrude Current wire frame density: ISOLINES=4 Select objects: 1 found Select objects: Specify height of extrusion or [Path]: 17 Specify angle of taper for extrusion <0>: Command: Command: Command: _extrude Current wire frame density: ISOLINES=4 Select objects: 1 found Select objects: Specify height of extrusion or [Path]: 5 Specify angle of taper for extrusion <0>:
Command: Command: Command: _polygon Enter number of sides <4>: _mid Requires an integer between 3 and 1024. Enter number of sides <4>: 6
Specify center of polygon or [Edge]: _mid of Enter an option [Inscribed in circle/Circumscribed about circle] <I>: c
Specify radius of circle: 1.5 Command: Command: _.erase 1 found Specify next point or [Undo]: Command: Command: Command: _dimcenter Select arc or circle: Command: Command: Command: Command: Command: Command: Command: Command: _line Specify first point: _mid of Specify next point or [Undo]: Specify next point or [Undo]: Command: Command: Command: _line Specify first point: _mid of Specify next point or [Undo]: *Cancel* Command: Specify opposite corner: Command: _.erase 3 found Command: Command: Command: _.erase 2 found
[?/Orthographic/Delete/Restore/Save/Ucs/Window]: _swiso Regenerating model. Command: Command: Command: _-view Enter an option [?/Orthographic/Delete/Restore/Save/Ucs/Window]: _seiso Regenerating model.
Command: Command: Command: _-view Enter an option [?/Orthographic/Delete/Restore/Save/Ucs/Window]: _neiso Regenerating model.
Command: Command: Command: _-view Enter an option [?/Orthographic/Delete/Restore/Save/Ucs/Window]: _nwiso Regenerating model.
Command: Command: Command: _-view Enter an option [?/Orthographic/Delete/Restore/Save/Ucs/Window]: _swiso Regenerating model.
Command: '_3dcorbit Press ESC or ENTER to exit, or right-click to display shortcut-menu. Regenerating model. Command: '_3dorbit Press ESC or ENTER to exit, or right-click to display shortcut-menu. Regenerating model.
** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel* Command: _.erase 2 found Command: Command: _.erase 1 found Command: Command: Command: _-view Enter an option [?/Orthographic/Delete/Restore/Save/Ucs/Window]: _front Regenerating model. Command: *Cancel* Command: *Cancel* Command: Command: Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: Specify radius of circle or [Diameter] <1.0000>: 1 Command: Command: Command: _solidedit Solids editing automatic checking: SOLIDCHECK=1 Enter a solids editing option [Face/Edge/Body/Undo/eXit] <eXit>: _face Enter a face editing option [Extrude/Move/Rotate/Offset/Taper/Delete/Copy/coLor/Undo/eXit] <eXit>: _extrude Select faces or [Undo/Remove]: A 3D solid must be selected. 1 face found.
Select faces or [Undo/Remove/ALL]: Specify height of extrusion or [Path]: *Cancel Comand: *Cancel* Command: *Cancel* Command: *Cancel* Command: *Cancel* Command: Command: Command: _region Select objects: 1 found Select objects: 1 loop extracted. 1 Region created. Command: Command: Command: _extrude Current wire frame density: ISOLINES=4 Select objects: 1 found Select objects: Specify height of extrusion or [Path]: 10 Specify angle of taper for extrusion <0> Command: Command: Command: _-view Enter an option [?/Orthographic/Delete/Restore/Save/Ucs/Window]: _swiso Regenerating model.
Command: Command: Command: _-view Enter an option [?/Orthographic/Delete/Restore/Save/Ucs/Window]: _seiso Regenerating model.
Command: Command: Command: _-view Enter an option [?/Orthographic/Delete/Restore/Save/Ucs/Window]: _neiso Regenerating model.
Command: Command: Command: _-view Enter an option [?/Orthographic/Delete/Restore/Save/Ucs/Window]: _nwiso Regenerating model.
Command: Command: Command: _copy Select objects: Specify opposite corner: 3 found
Select objects: Specify base point or displacement, or [Multiple]: Specify second point of displacement or <use first point as displacement>: Command: Command: Command: _subtract Select solids and regions to subtract from ..
Select objects: Select solids and regions to subtract .. Select objects: 1 found
Select objects:
Command: Command: Command: _shademode Current mode: 3D wireframe Enter option [2D wireframe/3D wireframe/Hidden/Flat/Gouraud/fLat+edges/gOuraud+edges] <3D wireframe>: _g Command: Command: Command: _shademode Current mode: Gouraud Enter option [2D wireframe/3D wireframe/Hidden/Flat/Gouraud/fLat+edges/gOuraud+edges] <Gouraud>: _3 Command: Command: Command: _subtract Select solids and regions to subtract from ..
Select objects: Select solids and regions to subtract .. Select objects: 1 found
Select objects:
Command: Command: Command: _shademode Current mode: 3D wireframe Enter option [2D wireframe/3D
wireframe/Hidden/Flat/Gouraud/fLat+edges/gOuraud+edges] <3D wireframe>: _g Command: '_3dorbit Press ESC or ENTER to exit, or right-click to display shortcut-menu. Regenerating model.
Command: Command: Command: _shademode Current mode: Gouraud Enter option [2D wireframe/3D wireframe/Hidden/Flat/Gouraud/fLat+edges/gOuraud+edges] <Gouraud>: _3 Command: '_3dorbit Press ESC or ENTER to exit, or right-click to display shortcut-menu. Regenerating model.