Professional Documents
Culture Documents
FOR COMPREHENSIVE CONTROL OF YOUR M2M APPLICATION, THE ENVIROMAX IS A COMPLETE INTELLIGENT TELEMETRY PACKAGE TO ADVANCE & POWER YOUR INDUSTRIAL APPLICATION.
Powered by the intelligence of Maxons exclusive Smartmax HSPA Smart Modem, the Enviromax controller is a cost-effective telemetry solution for M2M applications requiring supervisory and control of data equipment over the 3G network. Leveraging off the brains of the Smartmax Modem, the control flexibility of the Smartmax I/O Board, and its internal battery power, the Enviromax is impressively fully featured including 6 digital inputs, 4 digital outputs, 2 analog inputs, 1 pulse input port, reporting using DNP3 or via SMS through programming of the digital inputs and outputs and much more. All this encased in a robust IP66 rated enclosure for challenging environmental conditions. Combine this enclosure with the solar panel option for your complete low cost RTU solution which can be easily interfaced with any M2M application without requiring any additional power supply or charging circuitry. Without requiring costly and time-consuming changes to your existing application setup, the Enviromax can be easily integrated. Ideally designed and developed for communications devices that require remote monitoring and control in M2M applications, the cost-effective Enviromax is an all-in-one smart telemetry solution.
Enviromax Features
Compatible with any wireless operator in Australia HSPA, GSM, GPRS, EDGE compatible 6 Digital Inputs 4 Digital Outputs 2 Analog Inputs 1 Pulse Input Supports DNP3 reporting SMS reporting and Control Configurable via Web Interface Optional Solar Panel, Backup Battery and mounting brackets SDK (Software Development Kit) is available for the Smartmax HSPA Modem (Product Code: MA-2010S)
210812
Package includes:
PACKAGE 2
Metering
Package includes:
Water
Enviromax Optional/Additional Accessories: Solar Panel, Smartmax Board, I/O Board, I/O Cable
= =
PACKAGE 1
Frequency Bands
WCDMA/HSPA 850MHz, 900MHz, 1900MHz, 2100MHz GSM/GPRS/EDGE 850MHz, 900MHz, 1800MHz and 1900MHz
Road Signs
1 Pulse at Input 0 Frequency range 0 ~ 1000 Hz Accuracy (25C) 0.05 % of span Temperature stability 0.005 % / C Input impedance 47k
Security
Connection terminals
4 Digital Outputs 2 Analog Inputs 12bit resolution Accuracy: Typical 0.25% ; Worst Case 1% Maximum sampling rate: 10 sample/sec Input signal type: one of 0~20mA, 0~5V, or 0~10V MOSFET switch to ground Ro (Output resistance): less than 300 m VOpen (maximum allowed output voltage on open): 24 VDC IOut (maximum allowed switching current to ground): 1A Switching time < 10 msec Chatter free
Power
(The input type is selected by the jumper PULSE on the connected Smartmax and INPUT# on the I/O board) Input impedance for the signal type 0 ~ 20mA < 100 Input impedance for the signal type 0 ~ 10VDC > 10K
www.maxon.com.au
A mini usb cable is required for first time purchasers of the Smartmax, as most of the programming can only be done via the web interface. This is available in the Smartmax Complete Package (MA-2010C), the Smartmax SDK (MA-7000), and separately. Speak to your Maxon Account Manager for more information.
T | +612 8707 3000 F | +612 8707 3001 E | sales@maxon.com.au 36A Gibson Avenue, Padstow NSW Australia 2211 www.maxon.com.au