Professional Documents
Culture Documents
www.fakro.com
2010
1
ROOFING UNDERLAYS
H2O
DOES YOUR ROOF BREATHe? MEMBRANES THE WAY to A WARM AND DRY ROOF
H2O
H2O
H2O
H2O
H2O
STOP
WATERTIGHTNESS
H2O
VAPOUR - PERMEABILITY
Quality control system
The FAKRO Company oers a wide range of membranes and underlays designed to function as primary roong and protection of insulation against moisture and dust. In order to retain premium quality of oered products, the FAKRO Company is continuously verifying the key parameters of underlays and membranes such as: tear resistance, nail shank tear resistance, watertightness, roll length and width, basis weight. This guarantees that the product distributed under FAKRO brand always retains its declared technical parameters.
www.fakro.com
natur e
working with
ROOFING MEMBRANES
A roong membrane acts as an initial roong layer. It improves tightness of the roof, protects insulation against moisture and constitutes an important element of insulation systems used in pitched roofs. Application of the EUROTOP roong membrane in the roof structure brings many advantages.
ENERGY EFFICIENCY
Roong membranes do not require any air gaps between themselves and insulation. Insulation shifted towards membrane allows for thicker insulating layer of the roof along the whole rafter height which improves roof lagging and ensures energy savings. High vapour-permeability and watertightness of the EUROTOP membranes guarantee that the insulating material remains dry and only as such it can ensure high insulating properties. Windproofness and no ventilation gap between insulation and membrane prevents extraction of heat from the insulating material and penetration of moisture contained in the air.
EASE OF INSTALLATION
No need for any ventilation gap above insulation considerably facilitates installation work. Easier membrane installation translates into time savings, lower costs and reduced risk of workmanship error.
Thanks to high vapour permeability of membranes, excessive moisture is evaporated from insulation.
Membranes form a secondary line of protection against rain, snow, moisture and dust which penetrate through the primary roong. This gives a guarantee that potential leaks, water from melting snow or condensation are conveyed outside the roof and do not permeate the insulation layer.
Roong membranes oered by FAKRO are highly resistant to temperature, thus they can be installed in a number of roof structures, even those covered with metal sheeting.
www.fakro.com
BANDS
www.fakro.com
MEMBRANES
The EUROTOP membrane is a primary roong layer which improves roong tightness. It solves the problems related to condensation water accumulating in insulation and roof structure. The EUROTOP membranes can be used as initial roong of sloping roofs in case of both habitable and non-habitable loft spaces, and in external walls as windproong.
Pictogram description
Watertightness
MEMBRANES
L2 L3 N15
MEMBRANES
L2
technical parameters basis weight [g/m2] number of layers vapour permeability [g/m /24h]
2
L3
EUROTOP L3
95 3
N15
EUROTOP N15
115 3 2800 g/m2/24h
38C/85%RH Lyssy
EUROTOP L2
90 3 3100 g/m /24h
2
38C/85%RH Lyssy
1500 g/m2/24h
23C/85%RH Lyssy
vapour permeability coecient Sd [m] water penetration resistance class before and after articial ageing resistance to tearing lengthwise [N/5cm] crosswise [N/5cm] application temperature range [C] UV radiation resistance [month] material ammability class packing [roll/pallet] roll dimensions [m] possibility of use on full boarding
STOP
0.008 CLASS W1
0.020 CLASS W1
0.004 CLASS W1
no
no
yes
N35
EUROTOP
n35 s4 s65
N35
technical parameters basis weight [g/m2] number of layers vapour permeability [g/m /24h]
2
S4
EUROTOP S4
155 4
S65
EUROTOP S65
165 3 2300 g/m2/24h
38C/85%RH Lyssy
EUROTOP N35
135 3 2900 g/m /24h
2
38C/85%RH Lyssy
3100 g/m2/24h
38C/85%RH Lyssy
vapour permeability coecient Sd [m] water penetration resistance class before and after articial ageing resistance to tearing lengthwise [N/5cm] crosswise [N/5cm] application temperature range [C] UV radiation resistance [month] material ammability class packing [roll/pallet] roll dimensions [m] possibility of use on full boarding
0.007
0.004 CLASS W1
0.020
250 170
330 190
3 polypropylene E
36
25 1.5 x 50 yes
25
STOP
Kf 96
silver
MEMBRANES
standard
Kf 110
The KF low permeability membrane has found its application as an initial roong layer in building with habitable as well as non-habitable loft spaces. The low permeability membrane proves to be a very eective insulation of walls in buildings of skeleton structure (wooden or metal). In buildings in which function and simple roof shapes do not require application of membranes oering high vapour permeability and, at the same time, high strength and low material costs play major role, the low vapour permeability membrane can be used.
KF 96
technical parameters basis weight [g/m2] vapour permeability [g/m /24h]
2
KF 110
KF 110 STANDARD
110 30
KF 96 SILVER
98 130 CLASS W2 600 500 2 from -40C to +80C 1 F 50 1.5 x 50
head of water [mm] water penetration resistance before and after articial ageing tear resistance lengthwise [N/5cm] crosswise [N/5cm] UV radiation resistance [month] application temperature range [C] vapour permeability coecient Sd [m] ammability class packing [roll/pallet] roll dimensions [m]
STOP
240 190
NON-PERMEABLE ROOFING
UNDERLAYS
The Termofol 90 non-permeable underlay used in conjunction with EUROTOP high vapour permeability membranes makes it possible to retain proper climatic conditions within the habitable loft spaces. Termofol 90 provides very eective protection against moisture penetrating into insulation and, thanks to a thin layer of aluminium lm used, it partially reects the heat radiating from the loft. It improves eectiveness of heating, cutting energy consumption. Additional underlay reinforcement in the form of polypropylene netting adds to strength characteristics of the product. In order to ensure the possibility of reecting thermal radiation it is necessary to construct at least 2cm high reecting space.
termofOL
90
TERMOFOL
technical parameters basis weight [g/m2] resistance to tearing lengthwise N/5cm crosswise N/5cm tear resistance lengthwise N/5cm crosswise N/5cm resistance to weather conditions (months) application temperature range [C] vapour permeability coecient Sd [m] ammability class packing [roll/pallet] roll dimensions [m]
90
TERMOFOL 90
90 230 120 240 250 3 from -40C to +80C >70 E 50 1.50 x 50
STOP STOP
BANDS
EUROBAND W one-sided adhesive band based on polypropylene cloth, 50mm wide. Intended use: joining together successive layers of EUROTOP membranes, repairing EUROTOP membranes attaching EUROTOP membranes to wood, plastic or metals EUROBAND P one-sided adhesive band, 40mm wide. Intended use: sealing and insulating connection points between roong membranes or underlays and roof structure - eliminates the risk of water penetration to insulation and rafters through openings created by roong nails or pliers BUTYLBAND butyl band with adhesive on both sides, 10mm wide. Intended use: attaching EUROTOP membranes and Termofol 90 underlay to walls, around chimneys and anges over gutters, joining overlaps of EUROTOP membranes, low vapour permeability or non-permeable underlays, joining materials where permanent connection exibility and resistance to moisture and ageing is required. EUROBAND one-sided butyl band, coated with aluminium lm, 50mm thick Intended use: mending roong membranes and underlays, sealing skylights and windows, sealing around chimneys. ALUFIX one-sided butyl band, 75mm wide Intended use: sealing non-permeable underlays joining overlaps of non-permeable underlays mending non-permeable underlays
EUROTOP L2
EUROBAND P EUROBAND W EUROBAND BUTYLBAND ALUFIX
EUROTOP L3
EUROTOP N15
EUROTOP N35
EUROTOP S65
EUROTOP S4
TERMOFOL 90
+ + + + -
+ + + + -
+ + + + -
+ + + + -
+ + + + -
+ + + + -
+ + +
10
www.fakro.com
technical parameters band type carrier type adhesive temperature resistance installation temperature colour roll dimensions packing [roll/cardboard]
EUROBAND W
one-sided adhesive polypropylene bres acrylic from -40 to +120 C from +18 to +35 C turquoise 50mmx25m 24 rolls
EUROBAND P
one-sided adhesive non-absorbent polyethylene foam rubber-based from -30 to +80 C dark grey 40mmx30m 12 rolls
technical parameters band type carrier type adhesive temperature resistance application temperature colour roll dimensions packing [roll/cardboard]
BUTYLBAND
two-sided adhesive butyl butyl from -30 to +80 C from +5 to +40 C grey 10mmx20m 24 rolls
EUROBAND
one-sided adhesive butyl coated with aluminium lm butyl from -30 to +80 C from +5 to +40 C silver, grey 50mmx10m 12 rolls
ALUFIX
one-sided adhesive BOPP lm coated with aluminium acrylic 100 C silver 75mmx50m 64 rolls
www.fakro.com
11
www.fakro.com
FM/12s/COM/06.2010/F04E