Professional Documents
Culture Documents
02 Laboratory Glassware
02 Laboratory Glassware
LABORATORY GLASSWARE
FLASKS
The described range of flasks made of Borosilicate glass 3.3 for manipulators is our standard delivery range. On request we also supply other types according to the current standard.
Flasks, Erlenmeyer
Capacity and dimensions of these Erlenmeyer flasks with narrow neck, beaded rim and graduation correspond with ISO 1773. On request Erlenmeyer flasks with wide neck are also available. Erlenmeyer flasks are not suitable for vacuum.
Capacity (ml) 25 50 100 200 250 500 1000 2000 3000 5000 D 42 51 64 78 85 105 131 166 187 220 D1 22 22 22 34 34 34 42 50 50 50 H 72 87 105 135 142 178 223 280 310 365 Pack unit 10 10 10 10 10 10 10 10 5 4 Catalogue No. HAA HAA HAA HAA HAA HAA HAA HAA HAA HAA 60000 60000 60000 60000 60000 60000 60000 60000 60000 60000 03 04 05 06 07 08 09 10 11 12
2.2
NORMAG 2005
LABORATORY GLASSWARE
Flasks, round bottom
Capacity and bulb diameter of these flasks, round bottom with narrow neck and beaded rim correspond in bulb diameter and capacity to ISO 1773. The neck sizes can slightly differ. On request we also supply flasks, round bottom with long necks.
Capacity (ml) 50 100 250 500 1000 2000 4000 6000 10000 20000 D 51 64 85 105 131 166 207 236 275 365 D1 22 22 34 34 42 50 50 65 65 80 H 105 115 145 175 210 260 315 355 420 510 Pack unit 10 10 10 10 10 10 10 4 2 1 Catalogue No. HAA HAA HAA HAA HAA HAA HAA HAA HAA HAA 60010 60010 60010 60010 60010 60010 60010 60010 60010 60010 04 05 06 07 08 09 10 11 12 13
NORMAG 2005
2.3
LABORATORY GLASSWARE
TEST TUBES
These test tubes are fitted with SVL-screw thread and are delivered with a screw cap and PTFE lined rubber disc. All parts are autoclaveable up to 121 C for two hours.
Capacity (ml) 8 10 15 20 20 25 30 40 50 70 D H SVL-thread Pack unit 40 40 40 40 40 40 40 40 40 40 Catalogue No. HAA HAA HAA HAA HAA HAA HAA HAA HAA HAA 60070 60070 60070 60070 60070 60070 60070 60070 60070 60070 01 02 03 04 05 06 07 08 09 10
14 16 18 16 20 18 26 20 22 26
100 100 100 160 100 180 100 200 200 200
13 15 18 15 20 18 25 20 22 25
2.4
NORMAG 2005
LABORATORY GLASSWARE
Blanks
They are used for manufacturing of reaction vessels in short style. "DN" and "capacity" in the following table refer to the nominal size of the laboratory flat flange to be used and the nominal volume of the ready vessel.
DN Capacity (l) 1 2 4 6 10 D d h Pack unit 1 1 1 1 1 Catalogue No. HAA HAA HAA HAA HAA 60060 60060 60060 60060 60060 03 04 05 06 07
NORMAG 2005
2.5
LABORATORY GLASSWARE
Lids
Lids type A are only available in small nominal sizes and not ground, type B are flat ground. Both types do not have a groove. Grooves are only necessary on one side and normally vessels with a groove are used.
DN 60 100 100 120 150 200 H 42 44 65 70 70 95 Type A A B B B B Pack unit 6 4 3 4 2 2 Catalogue No. HAA HAA HAA HAA HAA HAA 60040 60040 60041 60041 60041 60041 02 03 02 03 04 05
Flanges
They are readily ground and available with or without groove according to DIN 12 214.
DN 60 100 120 150 200 d 68 106 130 155 215 h 50 60 60 75 75 Pack unit 2 2 2 2 2 Catalogue No. with groove HAA HAA HAA HAA HAA 60050 60050 60050 60050 60050 02 03 04 05 06 Catalogue No. without groove HAA HAA HAA HAA HAA 60051 60051 60051 60051 60051 02 03 04 05 06
2.6
NORMAG 2005
LABORATORY GLASSWARE
ACCESSORIES FOR LABORATORY FLAT FLANGES
To connect vessel and lid to a reaction vessel ready for use seals and clamps are necessary. Both parts are described below.
O-ring seals
These O-rings, made of silicone and FEP-lined, have a very high elasticity, ensuring a good recovery and re-use. On request O-rings made of silicone or Viton are available. The indication "DN" in the following table refers to the nominal size of the laboratory flat flange.
DN 60 100 120 150 200 dxs 75 110 133 157 215 x x x x x 4 4 4 5 5 Pack unit 1 1 1 1 1 Catalogue No. HAA HAA HAA HAA HAA 60080 60080 60080 60080 60080 02 03 04 05 06
Triple clamp
This triple clamp is especially suitable for vessels with laboratory flat flanges and fulfils several functions at the same time: the connection of lid and vessel and separate support of lid and vessel. The lid is easy to dismantle e.g. for cleaning, and the vessel is still tightly connected with the frame.
DN 60 100 120 150 200 Pack unit 1 1 1 1 1 Catalogue No. VAB VAB VAB VAB VAB 09490 09490 09490 09490 09490 01 02 03 04 05
NORMAG 2005
2.7